New incident error loading screen

Morning everyone, we have randomly had a problem starting with one screen. It comes up with "an error has occurred in the script on this page" line 674 char 52 error exprected ")' code 0 do you want to continue running scripts on this page?" see Restore screen by default and always rises, copied from a form of work and comes back again. After clicking Yes, the screen works normally.

Thanks in advance

OK created new screen together and connected to the screen, everything seems fine now.

Tags: VMware

Similar Questions

  • Satellite T130 - stuck on the loading screen - new hard drive required

    After a message on the screen saying back up your hard drive, it will fail quickly and pressing F1 it seems so stuck on the loading screen. I'm not too good with computers. I just have to buy a new hard drive to get the laptop working again, or is much more complicated than that. My guess is this one.

    Thanks in advance for any help provided

    The first question is: did you create recovery media (USB key)?
    If do not do this if for a long time your HARD drive works OK. original recovery image is saved on the HARD drive, but you must have it USB backup that you can use to install if the disk needs to be replaced.
    Do it as soon as possible. More info on what you can read in s operating manuals.

    What to do with the HARD drive? In my opinion if long as it works it has no reason to panic. Use your laptop as usual. If you notice some performance or more error messages problems I think that you should replace it.

    Replacing the HARD drive doesn't have to be so problematic. HARD drive cover must be placed in the lower corner of your laptop. The smallest is RAM and cotyledon should be for the HARD drive. Check it out.

    Before do you that this is remove the battery and unplug your computer laptop AC adapter / CC.

    If you have no experience with such things please don't made some risky step. You can damage something.

  • I get a black screen saying "error loading operating system".

    Dell Optiplex GX620: When I inserted a flash drive to back up a couple of new entries of Quicken, I get an unusual message and a black screen appears with another message above on the left that says "Error loading operating system".  It recharges got the same results.
    He managed the Express Test in the Partition Utilities [F12]. Then I went to Microsft.com/support and found articles on how torepair my computer from my data "Reinstallation CD Microsoft Windows XP Professional Service Pack 2" without losing. The 3 choices of the place where to repair Windows were: "-: partition1 [FAT] 31MB [24MB free];  C:partition2 [Unknown] 76246 MB [76245 MB free];   Unpartitioned space 16 MB. "I chose the c: [the computer said that the other 2 are too small.]  Finally, this message appeared: 'Partition is either too full, damaged, not formatted, or formatted with an incompatible file system.  To continue installing Windows, Setup must format this partition, C:Partition2 [Unknown] 76246 MB [76245 MB free]. All data will be lost. I left the repair.
    Hope this can help you get my computer goes withour data loss.  Thanks a lot, a lot, Joe

    Hi joesg,

    We recommend that you cross check if you have followed the steps correctly to perform the repair facility.
    See perform a repair Installation

    If the problem persists, then we you should back up data on the hard drive by connecting it to another computer and try to reinstall Windows XP.
    See How to install or upgrade to Windows XP

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • With the new Apple TV, I'm stuck on a black loading screen in the application to access all CBS. How can I solve this problem?

    I have the new Apple TV, and after seeing a show in the application to access all CBS I'm stuck on a black loading screen. This happened almost 10 minutes now and I don't know what to do to be able to find the main screens of the application and to be able to continue to watch the shows within the app.

    Press twice on the logo TV button then slide upward on the touchpad.

    The CBS app is stuck and hitting the button twice allows you to force the application to quit.

  • 2 Ihave rundll to appear on my screen when I start saying error loading I need them to be installed or I can remove them thanks

    2 rundll Ihave to appear on my screen when I start my pc, they declare that they are error loading c\windows\system32\prwleprn.dll. and c\windows\system32------nsiad.dll - (the specified module is not found.)   could you help please because I do not know if I need it or not if I could you tell me how I can install them, but if I don't need them could you tell me how I can remove them thanks

    PML instructions are precise and concise.

    My instructions for this issue are similar but more verbose - perhaps they will help you get your system fixed to the top (just read them first, then apply them).

    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.

    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.

    Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that you had or have an infection, followed with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.

  • HP ENVY m6 n010dx: HP ENVY m6 n010dx stuck on the loading screen

    I have another problem with my computer hp laptop. I'll give some general information, before I started having this problem.

    I was on my laptop, watching my email. I went to open a new tab and typed in "youtube.com" and the page will not load. After trying to have the research charge several times, I realized that I was getting nowhere. Then, I slipped on the computer left (being a touch screen, it would have to open the menu where I can restart the laptop). This screen never popped up (laptop was frozen) so I simply got the power button until the laptop is turned off. I then turned on the laptop back, and he began to start as usual. He showed the black background, with the blue hp logo and was spinning, white, loading icon at the bottom in the Center. However, he never went any further than that. It is not really frozen because the white loading icon turns without stopping. At this point, I tried to find what to do. I tried a reset (I turned off my laptop, took out the battery, unplugged the charger, which is held the power button for at least 15 seconds, put the battery in the back, plugged the charger back in and turned back on the laptop). After that, I'm always met the same loading screen hp, white spinning loading and all. Sometimes, under the white thing of loading are the words "Prepare the automatic repair" However, nothing happens.

    My laptop is a hp ENVY m6 n010dx (touch screen)

    The serial number is: [personal information deleted]

    Hello

    Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also compatible with the original questions that you describe.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

    Kind regards

    DP - K

  • The eloquence of empires 2 conquerors loading screen crash

    After changing the compatibility Win 98 or 95 (the operating system minimum for the game) for Age of Empires conquerors I get message saying of error "the application could not start properly (0 x 80000003). Click OK to close the application. »

    When the box saying the program is not responding and miscrsoft is looking for a solution, it does not and closed just the program (this box appears when you try to run the game without comppatibility. When I change to Windows XP (service pack) there is a loading screen, but it crashes, faints and there is no response from the game. It's that the game never started.  I tried to implement everything on several Web sites, including some on Microsoft Answers.

    The main problem I have is that I have played previously on the same PC with Win 7 64 bit, the only difference is that I now have a (fully updated) Nvidia GT220 graphics card. Also none of my virus protection pick up this game as being blocked.  Thus, the game is fully updated.  Another point, I play Age of Empires 2 with no problems, that I didn't even have to set compatibility. ASUS CG5457

    The screen is a Princeton 17 inch LCD monitor resolution 1280 x 1024

    hearts core i5 with technology 3.20 ghz turbo boost

    Intel HD 64 MB of PREVIOUS graphics card

    NEW graphics card Nvidia GT220 1 GB

    8 GB ram

    Win 7 64 bit

    Have you checked the Microsoft Windows 7 Compatibility Center to

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    If you enter "age of empires 2" in the search at the top of the page box you eventually reach this page

    http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Age%20of%20Empires%20II%20Gold&v=Microsoft&uid=&l=en&pf=0&pi=4&s=age%20of%20empires%202&os=64-bit

    who says Age of Empires Gold is not compatible with Win 7 x 64.  A research on Age of Empires conquerors does not give a result.

    Your experience shows that the game is highly dependent on the hardware configuration.  In this case, Microsoft call conservative and said simply "incompatible".

    Which edition of Windows 7 you are using?  Professional and above support XP Mode and the game should work in that very well.  XP mode is available as a free download and includes a free copy of a full license XP.  Which can be useful at the cost of an upgrade from Home Premium to professional.

    I run the legacy games in a virtual XP.  I use 7 Ultimate and VPC 2007 sp1.  The system requirements for your game is well within the capabilities of VPC and XP Mode.

    Colin Barnhorst

  • Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

    Original title: Windows Rundll error on startup

    My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

    What is a rundll error?

    File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

    Why do you Rundll errors?

    Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

    STEP 1: IDENTIFY

    The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

    STEP 2: STOP THE PROCESS

    Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
    1. open your Start menu.
    2. click on run
    3. in the command screen type:services.msc
    4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
    5.stop the "dll" service immediately.

    NOTE: sometimes the dll process can not be stopped by this method.

    STEP 3: CHECK FOR AND REMOVE

    You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

    This action will help you speed up the considerable load time of your applications. Here's how:

    1. click on Start
    2. click on run
    3. type regedit
    4. find this registry key:
    HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

    5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
    6. delete the value and reboot.

    SPECIAL REMARKS

    Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

    The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

    ======================

    More information is a lot to explain and resolve the problem.

    Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

    Because not only it solves problems, there will be new user settings and the program files needed for the user account.

    Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

    Here is the link.

    Run hitman pro 3.5

    http://www.SurfRight.nl/en/downloads

  • Error loading operating system message is displayed after the partial installation of Windows XP

    Hello all, I was doing a clean install of Windows XP from the CD on my desktop PC.  I had reached the point where I had deleted the existing system partition and created a new system partition and had begun to load data from system to system on the CD when I accidentally stop the surge protector, shutting off the power to the computer, the screen of the monitor, etc.  After that I restored power, I turned on the PC without the XP installation CD in the CD/DVD drive.  The system posted successfully and start the CD line appeared IMMEDIATELY followed by the message "error loading operating system" on a new line.  I tried to start with the installation of XP in the drive disc, as well as with the "Ultimate Boot CD" in the player - the "Error loading operating system" message appeared in both cases.  Thanks for any help you can provide!

    The desktop PC has had a full legal work Windows XP with SP3, but I chose to reinstall from scratch, because I had problems with corrupted data in the Zone Alarm and card ATI graphics card software that caused random outages, lead to situations of re - start.  I couldn't fix the files for these 2 applications that I had this desktop PC in stock for more than 18 months and I couldn't remember the administrator password I had used.

    Once more, these error messages tell me you dΘmarrez the hard disk and no CD-ROM drive.  The message "NTLDR is missing" is read the boot sector, on most of the installations of Windows, the boot sector is usually the absolute sector 63 on the disc, using DiskProbe you will see the text of the message to the given sector.

    Your drive is perhaps at fault... or it may be absolutely nothing wrong with it!  You may need to press a key to boot from the CD, often you see a message like «Press any key to boot from CD...» "or some thing in this sense, maybe you're not a touch and the BIOS ignores the boot from CD-ROM and goes to the next boot device (hard drive).

    John

  • Help! Error loading BatlogEx.dll

    Dear Forum,

    Could someone tell me please how to restore this file or advise the best course of action?

    Background:

    While the T43 was on the Windows logon screen and the loading up, I (stupidly) unplugged the power cord from my TP43 without a battery in it.

    After reboot, Windows will not load and the message "Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM"appeared. "

    With the help of a friend, I followed the instructions to http://support.microsoft.com/kb/307545 and the system boots now.

    Problem:

    After doing a system restore, the only problem is that now, a small box appears on startup with the message "error loading C:\PROGRA~1\ThinkPad\UTILIT~1\BatLogEx.dll".

    A Google search reveals that this file is utility battery IBM Thinkpad, which saves the changes in conditions such as load battery management discharges, etc.

    A search of my hard drive only this file located in the: C:\DRIVERS\WIN\BMMPM and C:\IBMTOOLS\DRIVERS\PWRMGR.

    Question:

    How can I solve this problem?

    Correctly guess that this file is useful?

    Thanks in advance for your help.

    Sincere greetings, Harryredknapp

    PS: The system is an IBM T43 under Windows XP SP3.

    Dear Forum,

    I've updated the power manager and that solved the problem with the BatLogEx.dll.

    However, another problem arose. A new "IBM Active Protection System" is now installed. When the computer is started, the following message appears:

    "Active protection does not work as the system detected the abnormal sensor State. To diagnose the sensor device, run PC DOCTOR - HDD Active Protection Test BACK and if it still shows, contact help and Service for repair. »

    When I try and run BACK PC DOCTOR, the program does not load.

    -Should I reinstall PC DOCTOR BACK to run the Test of Protection Active?
    -Could you someone kindly provide a link to the latest version for a T43?
    - Or do I have to disable Active Protection System of loading?
    -If Yes, how should I do this? :-)

    Thanks in advance!

    Harryredknapp

  • __lost my photo of microsoft program when I tried to download the upgrade essentials - error loading C\program can windows live \photo gallery\WLXphoto Gallery\WLXPhotoViewer.dll

    Original title: __lost my microsoft photo program when I tried to download the upgrade to essentials

    I tried to download the new update essentials download and three quarters of the way through, he stopped.
    The download was already about this. He said then; "put everything back as it was" when he did. I have
    lost my photo program. It now gives you a nag screen which keeps comeing like:

    Error loading C\program can windows live \photo gallery\WLXphoto Gallery\
    WLXPhotoViewer.dll
                              
    The system cannot find message for message number 0 X %1 in the message file

    0 x %2

    In addition, whenever I boot, the screen shows: "ready to download microsoft essentials" restoration is not
    the ride.

    After starting, the system leaves me alone until I try to open a j - peg or some file im trying to open.
    then the cycle starts again. further investigation, saying that I lost a dll.

    I tried to find microsoft photo viewer download to try to repair the photo of microsoft program and concluded that the
    only way I can do that is by downloading the essential upgrade download because it is attached to it.
    In order to accept the upgrade, the photo program should probably be repaired, as a thought as microsoft solve this Center says there is no problem. all other articles on the net is also not related or doesnot show how to fix the missing dll if it is the problem.

    Hello captain_crunch0,

    In addition to the steps proposed by Ajay, you could try and download and reinstall all Windows Live Photo Gallery 2011.
    This link should be just for the photo gallery. http://explore.live.com/Windows-Live-Photo-Gallery?OS=other

    Please reply back and let us know if this can help.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Help with error blue screen. BCCode: 116

    Hi, I get the following error message:

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 1053

    More information about the problem:
    BCCode: 116
    BCP1: FFFFFA8010AFC4E0
    BCP2: FFFFF8800FC9E7A0
    BCP3: FFFFFFFFC000009A
    BCP4: 0000000000000004
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1

    You can see here .dmp file:

    https://onedrive.live.com/redir?RESID=ED0BFFB73C652EF7! 126 & authkey =! AFdh-tv9C-zKTsA & ithint = the file % 2cdmp

    Hello

    Error checking 116, {fffffa8010afc4e0, fffff8800fc9e7a0, ffffffffc000009a, 4}

    Probably caused by: nvlddmkm.sys (nvlddmkm + 9a57a0)

    nvlddmkm.sys as of 07/02/2014 Nvidia video drivers.

    fffff880 '0f2f9000 fffff880' 0ff87000 nvlddmkm T (no symbol)
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp: Wed Jul 02 10:42:02 2014 (53B4446A)

    1. check with Nvidia Support, their drivers and documentation online and ask in their forums

    on known problems. Update the video driver. If there is no newer, you will need to come back
    for a more stable version.

    NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
    http://www.nvidia.com/download/index.aspx?lang=en-us

    NVIDIA Support - check with the support that she might be a known issue
    http://www.nvidia.com/page/support.html

    NVIDIA forums - also check for the forums it might be a known issue or others likely to have
    http://forums.nvidia.com/

    2. check with ASUStek support, their drivers and documentation online and ask in their forums

    on known problems. Updated BIOS, drivers of low level chipset and on-board major and
    separate device drivers.

    BiosVersion = 0205
    BiosReleaseDate = 01/08/2011
    SystemManufacturer = ASUSTeK Computer Inc..
    SystemProductName = CG8565
    Family = Desktop
    BaseBoardManufacturer = ASUSTeK Computer Inc..
    BaseBoardProduct = CG8565
    BaseBoardVersion = Rev 1. XX

    ASUS - Service<-- includes="" live="">
    http://www.service.ASUS.com/

    ASUStek support
    http://support.ASUS.com/

    ASUStek Forums
    http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

    ASUStek drivers
    http://support.ASUS.com/download/download.aspx?SLanguage=en-us

    3 use ALL other methods in the troubleshooters below and in the next message.

    =============================================================

    Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot BlueScreens - answers top 3 (+ 1 more).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    ------------------------------------------------------------

    References to Vista also apply to Windows 7.

    Have you updated your screen/video or other large recent drivers - check in Control Panel.
    Updates of Windows to see if a driver has been loaded it. Use this generic utility below
    and when you get to the section driver use the methods in the next message and then back to
    the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
    cause this error.

    Also check with the support of system Maker and video/display of the map because he could be called
    questions - also check in their forums.

    BCCode: 116 0 x 00000116

    Bug Check 0 x 116: VIDEO_TDR_ERROR

    Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to reset display driver and recover a timeout failed.

    Important info if you received a STOP Code

    If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

    If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

    These actions could prevent a mistake like this does not happen:

    1. Download and install updates for your computer from Windows Update device drivers.
    2. Scan your computer for computer viruses.
    3. Check your hard drive for errors.

    VIDEO_TDR_ERROR settings

    The following settings are displayed on the blue screen.

    Parameter Description

    1

    The pointer to the context internal TDR recovery, if they are available.

    2

    A pointer to the loaded device driver module (for example, the owner tag).

    3

    The error code of the last operation that failed, if they are available.

    4

    Reserved.

    BCCode: 116 0 x 00000116<-- read="" this="">
    * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

    --------------------------------------------------------------------------------

    The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
    special meaning (other than pilot caused bluescreens occur with some frequency).

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is)
    to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to stop Windows 7 automatically install drivers
    http://support.Microsoft.com/kb/2500967

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • "disk read error" and "error loading operating system"

    Hello

    I have a problem with my N100 0768 BSG with Windows XP system. When I turned it on there was a screen lenovo with a sign: "to stop the start normal lenovo care press on" as usual. But after that, instead of loading Windows there is a sign: "disc error". I restarted it, rescue and recovery execution and process of recovery.

    However, after about 20 minutes of the recovery process, I saw a blue screen with an error and I could just shut down the computer. When I turned on it again, it was screen lenovo and after that I saw: "error loading operating system". I rebooted it but now I can not even run "rescue and recovery".

    I downloaded a program of diagnosis of lenovo site, he engraved on dvd and run on my lenovo. When he was doing the "test Surface Scan" my drive hard, there was an error: ' error: found incorrigible error data.»

    I thought to buy rescue and lenovo recovery cd, but I heard that they do not sell in Poland.

    Please help me.

    Sorry for my English.

    Because of this:

    "When it was the"test Surface Scan"my drive hard, there was an error: ' error: found incorrigible error given."

    you might need a new hard drive, or need a scanner that can repair bad sectors.

    At the time where you buy new hd and will find the recovery discs,

    It can be expensive!

    I run Linux Mint on my N100 and it works very well. Cost, only the hd.

    Or, if you can get your hands on a disk full OEM version of your current operating system.

    You can use the Microsoft COA on bottom of laptop and install

    from scratch. I did it too, and it works with a phone

    call the automated Microsoft activation, if it will not be activated. Then, you

    install your drivers, etc..

    Remember, you do not sures go back to a "factory-installed",

    because that includes all unnecessary software that comes with the laptop originally

    and is now outdated in 3 years! There are other choices.

  • While first pro cs4 reached loading playmedia core faints just loading screen

    Hello

    Fujitsu Notebook

    The operating system XP pro version 2002 + sp3

    Pentium dual core cpu

    @2.00 ghz T4200

    1.20, 2.93 GB of ram although I have installed 4 GB but said thaty xp sees the max of 3 GB

    While charging when the core of playmedia reaches first pro cs4 "loading screen" disappears just of the desktopand, and when I try to restart a police message error pop up on the desktop

    any ideas of what is happening and how to fix this?

    Thank you

    Post edited by: DPs777

    Here are a few suggestions:

    1. Try loading new video drivers (nvidia or ATI)?
    2. provide a little more on your system (memory, GPU, OS, etc.)
    3. trash your Pref.

    Hope this helps,

    Dennis

  • Satellite Pro U400 freezes when toshiba load screen appears

    Please can someone help me!

    When I turn on my U400 it gets to the loading screen toshiba, but then everything freezes and used further.
    I tried f2, f8 and f12 but also simply freeze and goes no further.

    The hard drive light flashes at the start but then stop!
    The battery and the power cable are fine and so is the cd drive such that all continue to work.

    Can a little help if you please?
    I'm a beginner and this is my first laptop!

    Please PLEASE help me.

    Hello

    It seems that the laptop can not pass the Toshiba start screen properly
    What does that mean?
    Well, it means that an error has been detected during POST (power on self test).
    It could be everything. Memory faulty RAM, motherboard part etc.
    It is difficult to provide an accurate answer to this question, it would be necessary to check these parts first.

    Since you are a beginner, I recommend you contact a Toshiba (certified partner) ASP in your country guys may run diagnostic tests to discover the problem.

Maybe you are looking for