New information or screenshots on 'new Linksys Smart WiFi App improvements?

can't wait for the new user interface and function push notifications

From now on, there is no word of the technical team about it, VersusClyne. If there are updates, the application will automatically inform you.

Tags: Linksys Routers

Similar Questions

  • The network connection issues of comments with EA6300 (Linksys Smart wifi router AC1200)

    I have a friend who runs a Bed and Breakfast, and it is problems with guests to be able to connect to the Guest network.  She bought this router on the recommendation of Best Buy Geek Squad, after that she had a few problems with his predecessor.

    Everything is configured correctly, the router seems to work very well, especially with the normal network.  Network comments can be seen, with a decent amount of signal strength, but when people try and connect to the network and try to use it, they are never invited for comments login screen.

    I was able to verify that it works in fact - I helped set it up, but apparently there are several people who use Android phones and tablets and iPads that do not receive a prompt to enter the password of comments and continue.

    Is there any manual addresses can be entered in a browser to access the web connection screen invited?

    OR even better, is there a way to assign the password to the guest SSID as a normal wireless access point rather than allowing customers to connect to a password-promptless guest SSID and must try to finagle screen comments for pop up password?

    It's very frustrating for both my friend who runs a business and myself who are in favour.  The router is defective?  Y at - it a new firmware?  Any help would be appreciated.

    Hi troybenedict. For Android tablets and phones, there is an option there to forget the network.  Let them do first and connect again.

    In addition, they should asked for the password only when they begin to access Web sites.  They do not have that?

    You can also check the number of comments allowed Guest Access tab. There are limits the number of authorized clients.

  • How to upgrade the version of Adobe Flash Player on my new Samsung Smart TV

    How to upgrade the version of Adobe Flash Player on my new Samsung Smart TV?

    I just bought a Samsung Smart TV. When I try to watch ESPN3, I get the message: insufficient Flash drive requirements.

    Click to update provides the following information:

    Adobe Flash Player version 11.2.202.243.

    Your system: 32-bit Linux, Safari.

    NOTE: Adobe Flash Player 11.2 will be the last version of target Linux as a supported platform. Adobe will continue to provide backports of security Flash Player for Linux 11.2.

    Select Version to download:

    YUM for Linux (YUM)

    . for other Linux tar.gz

    for other Linux .rpm

    APT for UBUNTU 10.4.

    When I select the first 3 options of Linux, I get the message: IMPOSSIBLE TO DOWNLOAD.  When I select APT, I get the message SERVER NOT FOUND.

    Hello

    As I mentioned earlier in this thread (15,17 and 37 positions), doesn't matter which drive Flash updates for Smart TV, if any, would come from the manufacturer, Adobe and certainly not some random site asking you to fill out a questionnaire before give you a file.  Please contact your support of manufacturer of Smart TVs.

    Please, please, please, do NOT go to some random website that asks you to fill out a questionnaire to get a file.  If you happen to get a file, it will likely contain a virus, malware, etc..  Adobe, or any legitimate manufacture, will display a file on some random site and ask you to complete the questionnaire in order to obtain the file.  It just opens your system to all kinds of bad things.  Please do not.

    --

    Maria

  • my new keyboard smart pro ipad can't connect my ipad pro.

    my new keyboard smart pro ipad can't connect my ipad pro.  Please tell me how?

    You do not have to be paired:

    Use your Smart keyboard with iPad Pro - Apple Support

  • I cannot pair the new Apple TV Remote app with my first generation Apple TV.

    I cannot pair the new Apple TV Remote app with my first generation Apple TV. Someone knows what to do?

    You can use the old, now called iTunes Remote? A new one seems really targeted to ATV 4.

  • Hello. I want to change my country of the Jamaica, to the United States but the United States offers none as payment option. I just want to try the new Pokémon go app that is not available in Jamaica. Help, please

    Hello. I want to change my country of the Jamaica, to the United States but the United States offers none as payment option. I just want to try the new Pokémon go app that is not available in Jamaica. Help, please

    Unless you are in the USA, expect it to be available in Jamaica. People can not download content from iTunes Store from another country; This is why it is not an option for you.

    (143448)

  • Linksys Smart Wi - Fi is vulnerable to the heart bleed OpenSSL

    I'm curious to know if the Linksys Smart Wi - Fi site or routers are vulnerable to the exploit of heart bleed OpenSSL?

    http://SiliconANGLE.com/blog/2014/04/08/OpenSSL-heartbleed-vulnerability-may-affect-millions/

    BTW: Change your passwords...

    FW_LICENSE_EA4500_v2.1.39.145204 - 3 - RainCAP_n.html construction

  • How to remove several networks in the Smart WiFi Linksys

    I hope this is the right place to ask this question, if not please me foregive. I recently replaced my router with a WRT1900AC and after installation, I use my account for smart wifi Linksys to the Manager of this router that I used with my old Linksys router. However, when I noticed two other networks listed as to connect to networks of connection. They do not connect what either and I think that they are of my old router (I used the same network name). How do I remove these? They do not seem to be causing the problems, but are confused. Thanks in advance for any help!

    Ken

    Hello! Articles on the following link will help you remove the existing networks on your computers, portable devices or game consoles: http://www.linksys.com/us/search?text=remove%20networks&type=support_faqs

  • Peripheral in Linksys Smart Wi - Fi is listed with two address MAC - not correct.

    I use an EA4500 and allows to manage the device Linksys Smart Wi - Fi. In the household, we have several Apple I devices. Somehow the Linksys Smart Wi - Fi combines two separte I devices (iPhone 5 and a generation iTouch 4) to a single user.

    The devices have different names, but the Smart Wi - Fi is combined in one device. So I can't use the Parental control on one of the devices.

    I hope you can help me with that. We did ensure that both devices have different names.

       
     
     
     
     
    192.168.1.106
    F01:A9:95:67:17
     
     
    192.168.1.122

    88:C6:63:B0:5F:88

    Turn off the device and remove them manually from the list of devices. Then turn them on one by one. Once a unit will be reconnected to the network, add them to the list of DHCP reservation and see if that would help identify better devices. A DHCP reservation allows the router to assign or to book the same ip address of a device whenever it reconnects to the network.

  • I got a new PC and need to get a new invite resent so apps can be recharged

    I got a new PC and need to get a new invite resent so apps can be recharged

    How that occurs from the administration console was always as an active user?

    Install the desktop application from there, https://creative.adobe.com/products/creative-cloud

    and use it to install your cc l.

  • How does "Barneys New York" DPS 2015 app?

    Hi all

    I just downloaded Barneys New York application with Solution of DPS and wonder how Segal slimani (the studio that made the app) attend to create the effect of the introduction of this request?

    The window of Barneys New York on the App Store

    The launch of the application comes essentially directly in a folio of two items (navigation/animation instruction) instead of going directly to the collection of albums.

    This behavior is nice and gives some very good ideas here

    The two articles that you see are probably the two articles in the top-level collection. There is no way to make an app of DPS 2015 to do something else that open the collection of higher level on the launch, so it is likely the intro stuff you see are simply an article which is the first element of the TLC.

    Neil

  • Creating a new EUL in mode APPS

    I need to create a new EUL in mode APPS, so I'm in a few steps of http://learndiscoverer.blogspot.com/2009/03/clamping-down-discoverer.html, in order to do all that from the beginning.

    I think to create new spaces for storage (for data summary EUL and temp), new user CUST_BI with these spaces for storage of databases and then create the new EUL. I followed the Metalink Note 373634.1, but I'am in doubt if the parties in bold are OK:

    $ORACLE_HOME/bin/eulapi-CREATE_EUL-APPS_MODE-CONNECT system / < password > @ < db > - USER CUST_BI - < password > - USER_USERS disco_tbsp-disco_temp-EUL_LANGUAGE we-APPS_GRANT_DETAILS apps TEMPORARY_TABLESPACE / < password > - log EULcreation.log

    $ORACLE_HOME/bin/eulapi - CONNECT CUST_BI/ < password > @ < db > - GRANT_PRIVILEGE-USER DISCOADMIN - administration of PRIVILEGE-PRIVILEGE all_admin_privs-LOG grantEULAdminPriv.log

    (1) is the database CUST_BI in the right place user?

    (2) as you can see, I need to separate the administration of BI of EBS directors and DISCOADMIN is a new user Apps... any list of audit/recommendation for this new applications. user?

    Thanks in advance
    Alfonso

    Hello

    (1) is the database CUST_BI in the right place user?

    Yes, if you add the code of language on the user's behalf, for example CUST_BI_US. This will be the owner of the GUE, the schema that contains all the tables of EUL. The temporary tablespace that you specify in the create_eul command is used only when you sign in as owner EUL, isn't important.

    When you connect as a user apps, the connection will be made using the APPS database user and therefore the used temporary tablespace (and location of MVs) will be temporary and default tablespaces associated with the APPS user. You can change the temporary tablespace just for users of discoverer by issuing an ALTER SESSION SET CURRENT_SCHEMA command in a PL/SQL procedure called during the initialization of the discoverer sessions.

    (2) as you can see, I need to separate the administration of BI of EBS directors and DISCOADMIN is a new user Apps... any list of audit/recommendation for this new applications. user?

    The user of Directors disco can be any user applications with the EUL EUL administrative privileges. This user should then be used to create all sectors of activity, etc..

    Rod West

  • Need help with the Smart Wifi EA6400 association

    I set my router several months ago using the password provided with the Quick Start Guide. I have never changed the password. I have implemented all our family computers, laptops and iphones using the same password and have never had any problems of access to the internet. Two weeks ago I put in place our new Sony smart tv by using the same password without any problem.

    Until today, I had never set up a Smart Wifi account. Now that I did it, I can't associate my router on the account. He repeated to me that my password is not valid. How this can be when I was able to implement using this password. Even the properties of the router is showing this same password. I am trying to get into the router to set up a password for comments.  After reading a bit on the forums, I have even tried using "admin" and which was too disabled. I am at a loss here and need advice on how to proceed.

    Hi Stormy_01. By combining the Smartwifi account to your router, do not use the password you use to connect wireless. It should be the password to access the router configuration page. By default, the password of the router is "admin". If it does not, then go to this page I gave in the previous answer and click on the 'Forgotten password' option that should send you the link on how to reset the password of the router to your email.

    Furthermore, the rest of wireless devices are connected properly and are now working through the router, is that correct? If so, then we only need to focus on the recovery of the password in the configuration page or edit if you can access your settings. If all else fails, your last option is to reset the unit and start from scratch.

    Liezl-10104

    Linksys technical support

  • I can not connect to smart wifi router outside of the House?

    Hey.

    I need to portforward port for logging in my smart wifi router Linksys EA6500 from the House to the outside? I can only connect when I am om LAN or wifi...

    Another question: I can only connect to the same router using an application? Is there a way to connect via a browser?

    THX.

    When you have created an account for your WiFi Smart router, have you received a confirmation e-mail? Check your email and you must confirm it so that you will be able to use it. Refer to this link ofr more information: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=12e0e8fa76f340739d0cb72037819ca9_Creating__activat...

  • Question has Smart wifi

    I had my account smart wifi on my ea6500 but I just upgraded to wrt1900ac and now I see both routers on the account. How can I delete one of them? Thank you in advance.

    Leo2005 wrote:
    I had my account smart wifi on my ea6500 but I just upgraded to wrt1900ac and now I see both routers on the account. How can I delete one of them? Thank you in advance.

    Try this. Disable your account for a few seconds so that your email address will lose the connection he has with both routers, and then reactivate your account and associate the new router (WRT1900AC).

Maybe you are looking for