New ink cartridge does not print red
I replaced the ink cartridge and it won't print any red color, all other work
Contact the manufacturer of the printer
I put a new ink cartridge in the printer by default printer Hp laserjet 3020, but it prints as if the cartridge is dry.
According to the description of the problem, you cannot print after changing the cartridge for your HP printer. I suggest you to see the steps provided in the below items and see if it helps you to solve the problem.
Note: This article is for HP Deskjet 3520 but steps holds too good for HP Laserjet 3020
Along with this, you can refer to the Manual of HP Laserjet 3020.
Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.
My K850 printer is not printing cyan. According to the Toolbox of the K850, cartridge series cyan was 75%, and the health of the print head has been fair. The cyan cartridge was beyond its expiration date I replaced it. The new cartridge does not better than the old cartridge print. Before I spend another $40.00 + did someone has something to suggest?
Although the cleaning of the print head has helped a little, it did not help, so I bought a new cyan print head. When I installed the new print head, the printer automatically aligned to the printhead and now cyan works very well. Unfortunately, the alignment process pointed out flaws in magenta and Yellow Printhead. Now everytime that I print anything the printer goes through a continuous systematic alignment printhead to try to correct the magenta and Yellow Printhead, waste of paper and ink, until I cancel all print jobs. New cleaning of the printheads and the contacts did not help. In the end, no matter what is the status of print head in the tool box, replacing the print heads is the only solution that worked.
Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.
Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:
Cleaning of printheads
Cleaning of copper contacts
* Check for a good evacuation
My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.
The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
Suggestions on what to do now?
I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
(1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
(2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
(3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.
I have a HP Officejet 6500 a and have an operating system of Windows 10 on a Dell Inspiron 15R. The printer does not print any black ink. I have genuine HP cartridges and the black cartridge is about 75% full. It was working properly until this morning. I downloaded your troubleshooting and everything seems fine. I ran the program cleaning head several times, but I can't always get black ink on a page. The other colors are fine. After the second head cleaning, I got a very small black image, but head cleaning has resulted in no black ink. I made sure that the wind had been reached on the cartridge and this problem occurs with wireless and hard wired connections. Time before, it happened and when I replaced the cartridge, it worked. After reading some of the messages on the map, it seems not to be the solution. I also hesitate to throw a cartridge that is only 25% used. Can you help me?Hello @robertj138,
I have a HP Officejet Pro 8500. It's probably 2 or 3 years. He says not what 8500, but I think it was
a diagnosis 'as model A909a. My level of printing showed that the black ink cartridge must be replaced. I knew too because what should have been print black was printing a red light faded. I replaced the black cartridge with a HP product, but it is always print red and get more faded. Any ideas what could be the problem? Thank you!
UPDATE! Good news! Somehow I discovered that I needed to update the software. I think it could have been through the option "Scan Doctor". When I tried to install the software on your computer it wouldn't. But I went directly to the HP software download site, informed my hardware information and that worked! I downloaded and installed the updated software and that fixed my problem of black ink cartridge. I'm so happy and proud of myself!
I found the solution for me!
I replaced all my ink cartridges when they ran. The black cartridge is printing not and cannot even print alignment test page to align my new cartridges. They are HP cartridges I bought and now after all cleaning procedures, I have now exhausted all new cartridges. My warranty is exceeded, even if I have not received the new printer last Christmas, but my family he registered in August when they bought it for me. I'm going to buy new cartridges, but I fear that I will lose more money that this problem will not be solved. Someone help. I have uninstalled, reinstalled, cleaned print heads, tried to align the cartridges but error message appears then all new Board would be good. Thank you
I'm really sorry to hear about your Photosmart 5510 aligning properly and not printing in black ink. I understand that you have tried to align the printer and it has not solved the problem. I want to help you and make you my best to do it!
At this point, I do not pretend to try new cartridges (especially black) and trying to do the alignment again. I found a useful troubleshooting guide following which solves the problem, I hope.
Here's the guide I recommend following step by step:
* Tip - make sure that the printer is connected directly to the wall outlet.
Please do not hesitate to post your results here and I will help you further if necessary.
The product name and number: e-all-in-one printer, HP Photosmart 5514 - B111h
Operating system: Windows 7 64-bit
Error message: no
Changes made to your system until the problem occurred: no
I went to copy the data on my printer and noticed the empty ink was passed out. Changed the black print cartridge
and now I can't print anything that has a black colour. Replaced by a new black ink cartridge and
Unable to copy or print everything about the color white. Do you have all the guests on troubleshooting
with no luck.
Y at - it something else that can be done? Would appreciate the help.
You can try the following troubleshooting link:
In particular, solution 6 can be useful in your situation - print diagnostic print quality / check that the supplies are properly ventilated / print head cleaning.
Hope this helps.
Purchase was about a month to six weeks - waiting for the old cartridge to run out. Where red is normally printed is a shade of light green. Open to a suggestion of how to fix this problem. The printer is my old reliable Deskjet 990Cxi. The system is a HP Tower. works with Windows 7 SP2. This result occurs when the test page is printed when you install a new cardtrige (s) and when I print a document using Word with red symbology. There is no error message, just the eye ball and see that the page is incorrect. I bought HP cardtriges four or five times before with no problem, as long as they are not available in retail stores more.
Thank you very much, Bill [personal information deleted]
Okay Bill, because it is still under warranty I would say certainly contact HP telephone support on this issue, because I think that you will need a replacement cartridge.
Can you please let me know how you go?
My ink level is full. I just replaced my black cartridge (with genuine HP cartridges). No black is printing. I tried all the troubleshooting tips including the alignment of the printer, clean the print head. Remove and reinsert the cartridges. I replaced the cartridge several times during the past year is nothing new. Can't understand why black will not only be printed.
This is your last hope.
Watch the videos and if you can remove the printhead and clean, it might work.
Let us know...
I just installed a new black cartrdige of ink in my printer HP 6520. It will not be printed. I tried soaking of the thought of the cartridge it may be clogged. That did not help
This printer has been replaced once already because it has not previously. Is there something else to try?
The message here is a troubleshooting document links for the Photosmart 6520. If steps it do not solve the problem, Please contact the HP Support, even if the printer is no longer under warranty. If the foregoing is not satisfactory results so thanks for posting here.
I have the HP Officejet 4500 series printer. When I repaled branch HP 901 black cartridge is new, the alignment page went without black, undetected illustrated message text. I went through all the step to check the ink level, to clean the print head, troubleshooting... .but was frustrated. The b & w document print at all. Please advice. Thank you very much.
What is the warranty ends on the day on the cartridge? (AAAA/MM/JJ) If it is under warranty I had advice contact our telephone support HP...
My Officejet Pro L7500 has been used for several years without any problems printing. Recently, my documents printed blue display order. I replaced the cyan cartridge, and made sure all cartridges have plenty of ink. I ran the printer to clean the heads, align the cartridges, test print, etc.. Blue ink just doesn't appear. I also removed the cyan cartridge, blew some air in ink consumption and succeeded him. The printer gives message that there is a problem. Is there a solution?
This means that you need a new printhead cyan/black. This youtube show you how to replace the printhead. The print heads are usually sold where get you the cartridges.
My photosmart 5514 no black ink will print. tried the suggested cleaning the print head, but it still won't work.
has worked like a charm
What is value?
The problem solved itself suddenly. Black works now! I don't know what he cured I have applied a single repair by turning off it and back on and at the time that doesn't seem to work. It took until a few days later, when I decided to try another printer that I found that it worked. Thanks to all who have tried to solve my problem!
Maybe you are looking for
Surprised to not have an "Escape" key, which is pretty standard on keyboards. I can't live without the function keys, but that Esc is used by a lot of program. Someone at - it a good work around? (PS: everybody don't miss his auto of the iPad or pow
I have a VI that has more than 900 void screw which has been developing since the Labview V5. It has a control loop and a loop of data. The vehicle currently has half a dozen or more Windows vi it appears for different reasons. Most collect all
Hi, got a virus. reloaded all the ms provided with pc products. Could not load the logitech webcam. MSG reads as follows: 2753.modefilehandler.exe.F391CC83_EF1A_4896_9041_5DB56A38E313 internal error. Any help would be great. Thnx. J
I got the pages of updates over the past two years. I think the volume of updates had a negative impact on the use of memory and the computer takes an extremely long time to boot and load anything. Windows creates a record high every day useage, alth
I moved the table of characters on the desktop by mistake, where I have to move it to.