new installation of win XP does not updated

Hello

I have 2 units of office with a new installation of windows XP Pro top, but when I try to run updates it comes up with code 0x8024D001 error and says "the site has encountered a problem and cannot display the page you are trying to view.

I have not installed any other software apart from the SP3 and IE8.

Someone at - it ideas why 2 different units may be the cause of this problem?

Hello

I have 2 units of office with a new installation of windows XP Pro top, but when I try to run updates it comes up with code 0x8024D001 error and says "the site has encountered a problem and cannot display the page you are trying to view.

I have not installed any other software apart from the SP3 and IE8.

Someone at - it ideas why 2 different units may be the cause of this problem?

Hi Paul,.

You must first install Service Pack 3.

After you have installed, you can run the Fixit on this site:
http://support.Microsoft.com/kb/2497281/en-GB

Tags: Windows

Similar Questions

  • New installation of Win XP does not recognize an ethernet or wifi Internet connection.

    I'm reinstalling an old copy of Windows XP Home edition on a partition on my MacBook Pro and for some reason it gives me the ability to connect to the internet. I can connect with the side the laptop mac, both wireless and via ethernet, but when I boot on Windows, it is not even an option to connect to wireless networks, and he simply ignores the ethernet connection. I tried following a variety of instructions on the web, but no instructions corresponds to what I see on my end. Has anyone else encountered something like this before and know how to fix?

    You must install the network drivers for the Windows operating system. Windows doesn't know how to talk to your devices until you do.

  • New installation Photoship CS6-Bridge opens not updated after installation.

    New installation Photoship CS6-Bridge opens not updated after installation. What gives? Photoshop œuvres, mini bridge opens but does nothing.

    Hello sinner

    Please refer; http://forums.Adobe.com/message/4522770

  • Windows update on the new installation of Windows 7 does not.

    I have several hard drives in a custom PC built and installed Windows 7 on my smaller SSD mainly so I can play Fallout 3 (can not operate in Windows 10@#$%). Everything works fine but just, Windows Update runs and runs. I try to download the updates stand alone, and they just run and run with the message "search for updates on this PC." My Win7 Home Premium installation package had SP1 above. I even tried the update combined KB3125574 and he said that it is not applicable to my PC. From what I understand, MS does not pay much attention to their update servers Win7 more, but I'd appreciate any help.

    Robert Hoefer

    I tried on 2 5?

    When you install Windows, do not apply the recommended settings for the automatic updates. In the "Set up Windows", select ask me later.

    http://www.kodyaz.com/images/articles/Windows7-installation-RC/35.PNG

    Install KB3020369.

    Install KB3172605.

    Best regards, VZ

  • New installation of Windows XP does not - UNMOUNTABLE_BOOT_VOLUME

    I'm trying to do a fresh install of Windows XP.

    Soyo SY - P41 845PE Lite MB
    Pentium 4, 2.4 GHz
    1.5 GB of Ram

    This is a computer that I use every day and who usually has a hard drive with WindowsXP SP3. I just want to have a spare hard drive with a new installation of Windows XP on it.

    But installation can not. Usually to auto restart after step 'Copy files' of the installation process. The Windows splash screen appears briefly, and then blue screen message, "a problem has been detected and Windows has shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME"followed a few Advisory paragraph which does not apply because the operating system is not yet loaded, then:" technical information: * STOP: (0x8951c900) 0xc0000185 0x00000000 0x00000000. "

    Once he got as far as the Windows Installer screen (one who tells me it will take 39 minutes down left) then a box seemed to read: "Fatal Error. An error was encountered which prevents the installation to continue. Installation failed to install the product catalogs. This is a fatal error. The Setup logs files should contain more information. "Read the Setup log file:" error: the signature for the installation of Windows XP Professional is not valid. " The error code is 80096001. An error occurred during trust verification. »

    Another time, after you press enter in the "WindowsXP installation on the selected element", I INSTANTLY got a screen which read; «An error has occurred during installation has been updated of the partition information on 152626 MB disk 0 at Id 0 on bus 0 on atapi [MBR].» Setup cannot continue. »

    Things, that I already tried that did not work:

    Using two different Windows XP Professional installation disks.

    Withdrawal and tries to install with different RAM sticks in place.

    Two IDE 40 son different cables, which work fine on this computer.

    Two different Western Digital disks hard two test without error using the WD diagnostic utility.

    My knowledge is limited, but that seems to leave only a bad card mother, right?  However, as I say, the computer works well with this old install Windows XP on it. He simply refuses to let me do a new installation on another hard drive.

    What other steps can I take to get a new installation on a hard drive with this computer?

    Thanks to each of you for your attention to my problem.

    I spent $4 on a 80 wire cable IDE (to replace the 40-wire cable I used) and I was finally able to get Windows XP installed today.

    Because I had done installations in the past with the 40 wire cable, I don't understand why it didn't work anymore. I guess the age of the cable, but I actually had multiple failures with a whole new thread 40 I had just bought. A mystery, but at least I now have a new facility and I am inclined to believe the 80 wire will make for a faster computer.

  • PS CS5 new installation Mac crashes and will not update. Is this a problem of deactivation on my old desktop?

    I could put this copy on a Mac Pro and have it on a laptop as well. Now, I have a new iMac and I loaded it from the original disc. It hangs and does not allow me to update. I disabled it on the old Mac Pro. When I go on my Adobe account, it only shows that I have a registered product. I got an Adobe account, but I have maybe 2 email addresses I've used in the past. I am very confused as to why I can't upgrade. It tells me that the upgrade could not be installed, try agin later, but when I click on an explanation, he sends me to a page that references my serial number of problems. I'm tired of going round in circles. Help, please.

    Please download and install that 12.0.4 update assani gave you the link. It fixes the bugs of printing.  It is important.

    Before installation, you need to stop guardian for one until it is finished or it crashes at installation.

    Apple System Preferences > Security & Privacy > Legeneralonglet and set Apps download from: anywhere.

    Then, run the Setup program.

    CS5 update no longer works for anyone, you must download and install your updates manually.

    Gene

  • New installation of XP, keycode does not

    I recently bought a dozen Lenovo computers.  Some Thinkpad T510 and 400.  Some Thinkstation S20 and E20.  I have them all rights of Windows 7, but with XP pre-installed.  Since they came with a bunch of software assessment and some other junk on them I was just going to clean and reinstall XP.

    As computers have Win 7 rights, the tag on the back is a keycode Win 7 so I used one of the key finders to get the XP key off each machine code and all have the standard Lenovo preactivated key that works only on Lenovos.  So I erased the computer and installed XP Pro on all and all installs it took the keycode.

    Now normally Windows should see this keycode and detect that it is a Lenovo and not need to activate, however it prompts to activate.  But when I go to activate Windows tells me that the code is not valid.

    I have a feeling is what they keycode xxxxx-xxxxx-xxxxx-xxxxx-xxxxx is not match HKLM\Software\Microsoft\Windows\CurrentVersion\ProductID which varies according to the type of CD used to install XP Pro.  For example, if you use a CD XP Pro SP1 OEM to install XP your ProductID registry key will result in:

    XXXXX-OEM-0014324-XXXXX

    And SP2 OEM will result in:

    XXXXX-OEM-0060807-XXXXX

    So the question is, what the Lenovo XP Pro generates a product for the standard CD key identifier?  I probably know the answer if I does not format all the computers at the same time...

    You must get a restore CD XP from Lenovo. (you will need to call them for him) You will probably need to pay for shipping. If your warranty you need to do a no-cost. (by a message I saw by Mark_Lenovo) P.S. the more likely using an OEM XP disk. (as a disc of Lenovo WILL see your key integrated)

  • New installation of Windows 7 does not start

    I am building two identical systems and have had the same result by installing Windows 7 x 64. The installation goes perfectly well, but when it's time to reboot a few messages and re-positions of the bios as it cannot find the boot partition / OS.

    The CD of installation of windows 7 cannot repair the installation because it "does not support the installed version of windows."

    I did a restore CD that has worked, but he can't find a problem and after reboot everything is there and messages & re-positions.

    Any ideas?

    I finally did a Windows 7 64-bit repair CD and used that to get into the command prompt and use bootrec /fixmbr and then /fixboot bootrec and which corrects the problem.

  • cant update older version of windows xp home ed. Installer is corrupt, have does not update iexplore 6 to 8.

    system went into recovery to install software drivers etc. Cannot update anyything in essen of microsoft xp. nothing does update. tatkes me tthats screen pink support told me ever since, tells me windows setup is damaged, or not pointing to the rite file. has made all things MS suggest that nothing works, have all service packs, which is good, should answer only, please.

    The other post:

    cant updateunhandled 0x0040b677 in wuauclt.exe exception: access violation reading location 0 0xc0000005 x 00000000 how to manually repair tools don't work not windows always takes me into the pink microphone support screen and done everything which they suggest no go.

    While you are waiting for someone is 'Good', take a look at this:

    How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
    http://support.Microsoft.com/kb/2438651

    You receive an error message when you try to install a program that uses Windows Installer in Windows XP
    http://support.Microsoft.com/kb/886630

    Windows Installer 4.5 is available
    http://support.Microsoft.com/kb/942288

  • New installation of Windows will be not updated

    I installed a free version of Windows 7 64 bit on a new generation of computer. Activation went through successfully.

    The problem is that I can't run any programs that need to use internet to get updates. This includes Windows Update, anti virus, or games. I can't even download and run Windows IT. difficulty strange thing is I can surf the internet without any problem.

    Windows Update gives me error codes 80244015 and 8024400 a.

    Any help would be greatly appreciated.

    This is an old question, but it should work

    If looking for updates to hang on a current installation,

    Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

    4.5.2 is more consistent to have installed,

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

    Switch your windows update setting to never check the updates temporarily

    Restart the machine

    You can try and install the latest client update manually let your update settings to never check for updates until you install it.

    https://support.Microsoft.com/en-us/KB/3138612

    Then you download this from your download folder run from there.

    https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

    Download the x 86 for 32-bit or x 64 for 64-bit

    Install it and restart when prompted too after he did a search of stand-alone for updates that should not

    take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

    updates before running from the downloads folder.

    Once it installs and restarts

    You can reset your updates affecting everything you had before default =...

    Then check the updates manually.

    I think that the solution came from Softpedia and Joel_CS posted on this thread,

    http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

    You must scroll down for Joel SC post threads, it is the last answer on this page,

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

  • OfficeJet 6500 a installation disc will auto does not start on my thinkpad win 7. ??

    OfficeJet 6500 a installation disc will auto does not start on my thinkpad win 7. ??

    Try to download the software from hp.com via the link below.

    http://h10025.www1.HP.com/ewfrf/wc/product?product=4083977&LC=en&cc=us&DLC=en&task=&lang=en&cc=us

  • My computer (win 7) does not detect the new lx1000 lifechat headset. Cannot use the microphone while I am on Skype.

    My computer (win 7) does not detect the new headset.

    Cannot use the microphone while I am on Skype.
    I Can hear music, but I can't record any sound, for the most part the microphone does not work as it should. (Which is terrible for a MS product)
    Can not see the device on the list of Audio material.
    Help?
    Thanks in advance
     
    Original title: lx1000 lifechat

    Not sure, but maybe - http://support.microsoft.com/kb/935748/en-gb

    It will be useful.

  • Does not update Lightroom 6.0 (win)

    Hello

    I bought and installed Lightroom 6 (not the CC version). Lightroom runs as expected but will not update.

    When I click on help-> updates the title bar flashes once and that's it. I also tried to install as suggestet in keeping up-to-date with Lightroom

    However, Setup does not open any window and does not update to lightroom. I'm under the 64-bit version of windows 10.

    Any help would be appreciated

    In this case try the CC Cleaner use the Adobe Creative Cloud cleaning tool to solve installation problems (I know it says it is for CC, but it works for perpetual licenses too)

  • If installation Adobe Acrobat DC Windows install does not update of managed advertised products. At least one characteristic of the product must be installed before applying the update.

    If installation Adobe Acrobat DC Windows install does not update of managed advertised products. At least one characteristic of the product must be installed before applying the update.

    Contact adobe support by clicking on this link then "still need help" as soon as it appears, http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Does not update CS5 Production Premium, re-installed on the new PC (Windows 8.1). Cannot read Canon CR2 files.  I have re-installed.  What's wrong?

    Does not update CS5 Production Premium, re-installed on the new PC (Windows 8.1). Cannot read Canon CR2 files.  I have re-installed.  What's wrong?

    Jeff, thank you.  I couldn't update any program in CS5.  It turned out that I had to do a 'update manual".  Not sure why it was different, but it worked.

Maybe you are looking for