New laptop / problem with Ports

Hello, I bought a hp dv6 Clubhouse yesterday and I noticed problems with the positioning of the ports.

First of all, when I inserted a USB stick in the usb port it seemed very tight and more difficult then it should have been. Second, the ethernet cord is stuck. I looked in the ports and compared them with my mother hp entertainment pc clubhouse and they seem to be at a strange angle.

I know that's not good.

However, we have a 3/4 year warranty on it.

is this a regular event? A manufacturing defect? will they be able to replace it?

If you face in fact a usability problem with the design of ethernet and USB ports, I would simply say to return it and get it exchanged. like this a brand new laptop.

Also back up all the files is installed on this laptop, perform a system restore (restore to factory settings) on the laptop before returning it to the place where you bought it.

Tags: Notebooks

Similar Questions

  • Having problems with ports USB 3.0 in computer option H8 - 1010 T

    Well, I bought the option USB 3.0 ports on top of the computer on the computer mentioned in the Thread object and I have problems with them.

    I tried plugging USB 2.0 devices in these two ports to "test" to see if they work, yet I am not able to get them to work with USB 2.0 devices. USB 2.0 is not compatible with USB 3.0 ports? Or I'm doing something other 'evil' here?

    Unfortunately, I do not have a USB 3.0 device to plug USB 3.0 ports to make sure that it is certainly a problem with ports still.

    The device in question I've tried in the USB 3.0 ports is a Microsoft Wireless Mouse 6000 wireless receiver. If the ports are not connected correctly, I would have assumed that the wireless receiver would have "blown" when I plugged it in, but it still works very well.

    USB 2.0 devices are not compatible with USB 3.0 ports? I know that USB 3.0 devices are backward compatible with USB 2.0 ports (I have a friend who is in this situation), but I also thought that the opposite was supposed to be true as well. Am I wrong?

    @William

    Check out this thread, seems to be the same problem you are having.

    http://h30434.www3.HP.com/T5/desktop-hardware/USB-3-0-ports-on-Pavilion-HP8-1070t-not-working/m-p/792857/highlight/true#M35248

  • Installation code doenst work, code that is written in my acount adobe will not activate my product. Is een reinstal on a new laptop computer with windows 10.

    Installation code doenst work, code that is written in my acount adobe will not activate my product. Is een reinstal on a new laptop computer with windows 10. the same code that is delivered on paper when I bought adobe

    Creative cloud does not use a serial number and creative cloud subscribers for not having any serial number associated with their programs.  Creative cloud subscribers use their adobe ID to activate their programs.

    Download and install the desktop creative cloud application (after signing with your adobe - the same as that used to pay for your creative cloud subscription ID), https://creative.adobe.com/products/creative-cloud

    Open the office application (a shortcut will be on your desktop) > click applications, and then select the programs you want to install.

    the desktop application gives you access to the cs6, cc, cc 2014 and cc 2015 apps.  and probably more in the future.

    If you already have the cc desktop application and you need to update your adobe id, log out and then back to your client application using the adobe id to pay for your subscription in cc: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  • Problem with Port on the DV7-3079wm of charge

    Hello world.  I searched the forum for this question and other places and I think I probably know what is the problem, but I wanted to make sure that before I go ahead with trying to fix and get some advice on my specific problem.

    I have a HP Pavilion DV7-3079wm running Windows 7 64 bit.  I have problems with the laptop to load.  I've already replaced the battery to eliminate this problem, but I need one anyway, because one was not maintain a load more.

    So the problem is when I plug my power adapter most of the time that he does not even recognize that I have it plugged.  No light load on the side or the front.  So if I slowly wiggle out or try to angle in one sense or the other, eventually he'll catch a connection and then 1 of 2 things going on.  Either she viewed the laptop too long that I do not move the charger of whatever the position in GOLD, it pops up a message saying "Smart AC output adapter is too weak for this computer." and then proceeds to the load of the laptop or it just says: "plugged in, do not load.

    I do not know if my problem is the AC adapter or if the port inside the laptop is messed up, which from what I've read on other forums requires either a new motherboard or tear down my laptop and re - solder a new fee on the motherboard port.

    I can't wait to buy a new adapter if it isn't the problem.  Also another problem, I am very happy with my laptop and really intended to max on memory and improve for one SSD but I don't want to sink money into it until I get this problem resolved.  Any help would be appreciated.

    Thank you

    No rust spots on the inside or outside of my plug adaptors CA.  I finally just went and got a new adapter and when comparing it to mine its all brilliant inside the end of the plug where mine is dull looking.  Which may mean it was just salty and was not getting a good connection.  A new Bill without problem, and immediately, although she Wiggles, if fortunately is not the port inside the laptop.  I'll try to clean my AC adapter / CC and see if it makes too much work again.  Thanks for everyone's help and info that it was appreciated and he has helped guide me in the right direction.  Also, if the port never turn off, now I know where to get a replacement.

    Up next... go to the SSD & maxing out the memory.  I can't wait!

    Thank you!!!

  • Satellite Pro L10 problem with Ports COM/Hyperterminal & Bluetooth

    Hello
    I have the following problems with the above machine:

    (1) I have attached an external series COM port to the machine. However, I can not connect to the COM Port using Hyperterminal.
    (2) I installed a Bluetooth USB adapter, but I can't view the protocol configuration.

    Each of the above works perfectly with another laptop that doesn't have a Bluetooth or even a network card.

    Everyone has experienced similar problems. I use WinXP SP2.

    Thank you

    MC

    Hello

    1, in which is the external COM port connected? Is detected in a straight path in Device Manager? What is the error msg to Hyperterminal?
    When connected via PCMCIA, try to change the settings for PCMCIA slot in the BIOS!

    2, try to reinstall the Toshiba Bluetooth stack! There may be some problems. The MS Bluetooth stack does not work properly with the Toshiba devices and one of the earlier Toshiba Bluetooth stack is not signed by Windows XP Service Pack 2!

    Hans Bye

  • Toshiba Tecra A3 - problem with Port Replikator III

    Hello

    I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

    any help is much appreciated
    Thank you
    Mario

    Hello

    As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

    Good bye

  • Problem with Port Forwarding (When PPTP is upward) in the WRT-160N

    Hello world!

    I'm looking for more help with Port Forwarding in my new Linksys router. I bought the daysago afew router and was pretty surprised when I discovered that there is no DD - WRT firmware is installed in it (the router was 100% NEW when I bought it). I downloaded latest firmware original and flashed Linksys file successfully.

    But I still have the problem (even that I was on DD - WRT firmware too) with the port forwarding for my DC ++ and Vuze (app from torrents): I wrote port forward for ports 49151 (for Vuze) and 4000 (for DC ++) to pass on to my desktop computer (IP 192.168.1.201) - I saw a post on this forum, that there could be a problem If you transfer to an IP address, which is within the local area of DHCP, so I forwarded to IP.201 (my local DHCPzone is 192.168.1.100-. 149) But does not forwardind (())

    What's wrong?

    My configuration:

    Router IP: 192.168.1.1

    PPTP (I my ISP)

    IP address: 192.168.226.127

    Default gateway: 192.168.226.2

    DNS 1: 192.168.1.1

    2 & 3 DNS: 0.0.0.0

    The IP address of the PPTP server: 192.168.226.2

    User name: *.

    Password: *.

    _____________________

    Simple Port Forwarding:

    Name of the external port application port internal protocol for IP address Enabled

    Vuze 49151 49151 times checked 192.168.1.201

    DC 4000 4000 checked two 192.168.1.201

    As you mentioned in your post that your ISP has provided you with a PPTP connection with an IP address: 192.x.x.x. The IP address that is provided by your ISP is in a private beach, and if you try to transfer all the ports on your router, it will not work, as long as your ISP modem is blocking this port. If you need get a public IP address from your ISP.

    As you get Private IP of your ISP, if this connection is called as NAT behind NAT and your Modem behaves like a router.

    So now you have 2 options, get the public IP address from your ISP or change the type of connection.

  • Several BSOD on a new laptop computer with windows 8 is installed

    Hi all

    I got a new laptop ASUS G750jx two weeks ago and have had accidents since the first day.

    So far, I have tried various hardware diagnostic tools:

    Memtest - it ran for 19 hours in multi-threaded mode, made 11 passes and had no error

    Intel diagnostic tool - found no errors

    SeaTools - had no errors

    Fumark, 3dmark - without problems

    Ran system with controlled driver enabled, had accidents, but all associated with nt kernel and doesn't really give much information (I had updated to windows 8.1 right here)

    A few days before the reset everything back to the factory settings and had more luck getting references to specific drivers in minidumps, such as sortport.sys, dxgkrnl.sys and nvlddmkm.sys. Obviously, tried all latest drivers on the website of the manufacturer, but problems persist.

    Unfortunately I deleted the latest dumps, so I enclose precedents

    https://onedrive.live.com/redir?RESID=F9EB48B99E88CF9F! 107 & authkey =! ACULQBFwZYAcOlQ&ithint=file%2c.zip

    Please let me know if you need more information.

    Thank you

    DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

    This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

    A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

    BugCheck D1, {ffffffffffffff85, 2, 1, fffff880043a646c}

    We can see the 1st parameter is completely false and is in no way a valid address. We can check this:

    0: kd >! ffffffffffffff85 pte
    GO ffffffffffffff85
    PXE to the EPP of FFFFF6FB7DBEDFF8 at FFFFF6FB7DBFFFF8 at FFFFF6FB7FFFFFF8 at FFFFF6FFFFFFFFF8 PTE POE
    contains A 00000000011, 0063 contains 0000000001121063 contains 00000000011EF063 contains 0000000000000000
    GetUlongFromAddress: cannot read fffff8028955b0e4
    NFP 11 has 0 - DA - KWEV NFP 1121 - DA - KWEV NPF 11ef - DA - invalid KWEV

    That said, we know that a driver has accessed a completely invalid address with a too high IRQL. Good, what driver?

    0: kd > k
    Call child-SP RetAddr site
    fffff802'8abc82a8 fffff802 8925 c 869 nt! KeBugCheckEx
    fffff802 '8abc82b0 fffff802' 8925b0e0 nt! KiBugCheckDispatch + 0 x 69
    '8abc83f0 fffff880' fffff802 043a646c nt! KiPageFault + 0 x 260
    fffff802 '8abc8580 fffff880' 043a5f87 dxgmms1! VIDMM_GLOBAL::RemoveDMAReferences + 0x1c
    fffff802 '8abc85b0 fffff880' 043ac0fc dxgmms1! VIDMM_GLOBAL::UnreferenceDmaBuffer + 0 x 57
    fffff802 '8abc85e0 fffff880' 043abdd3 dxgmms1! VidSchiProcessDpcCompletedPacket + 0 x 304
    fffff802 '8abc8670 fffff880' 043ab629 dxgmms1! VidSchiProcessDpcDmaPacket + 0x18b
    fffff802 '8abc86b0 fffff880' 043ab513 dxgmms1! VidSchDdiNotifyDpcWorker + 0xd9
    fffff802 '8abc86e0 fffff880' 0423188a dxgmms1! VidSchDdiNotifyDpc + 0 x 87
    fffff802 '8abc8730 fffff880' 051a4a68 dxgkrnl! DxgNotifyDpcCB + 0x5a
    fffff802'8abc8760 fffffa80'12866000 nvlddmkm + 0xcba68
    fffff802' 00000000 00000000 8abc8768 of ' 0xfffffa80'12866000

    Interesting pile!

    We start somewhere in kernel mode with something going on - 0xfffffa80'12866000. Then we have a video driver nVidia bird call, a core of DirectX notifying a DPC, followed by a series of calls DirectX MMS dealing with all video Planner dealing with Direct Memory Access on a DPC.

    Shortly after that we remove references DMA, we call a pagefault.

    Regarding the statement us failed on:

    ADC byte ptr [rax + rdx-7Dh]

    With deference, we add a pointer that has been stored in the registers rax + rdx .

    -FAILURE_BUCKET_ID: IP_MISALIGNED_dxgmms1.sys

    Misaligned within DirectX MMS instruction pointer.

    ------------------------------------

    1. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

    2 if the above fails, you have not even need to test if there is a graphics card defective, because it is (or defective Board in general). You must then indicate the manufacturer what I just told you, and they shouldn't give you a hard time... If all goes well.

    Kind regards

    Patrick

  • Qosmio G10: problem with Port Monitor

    Hi all

    I have a Qosmio (G10), but I have a problem with the functions of 'Port Monitor-in '. However, I have connected my computer cassette player output ports "port monitor" with the proper cables and jack and get good sound but get no video.

    where I go wrong?

    Thanks in advance.

    Hello
    you need to go to "start / all programs/toshiba/utilities/photo Enhancement utility ' and then click 'monitor input parameters'"
    choose s-video and monitor-in.

    Good bye

  • HP 15 laptop: problem with the touchpad and the key "stuck."

    Hello!
     
    Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
     
    First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
     
    Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
     
    Thank you in advance for your help!

    Welcome to the HP support community @gouch3.

    I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

    Have you tried to use a keyboard external and mouse at all?

    Have you tried to go to Safe Mode to see if the problems persist in there?

    Have you tried to perform a material or forced reset Reset?

    Did you do a test of material?

    Have you updated your drivers?

    gouch3 wrote:

    ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

    It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

    I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

    • Beginning
    • Search for Device Manager
    • Search results, open Device Manager.
    • Click on display
    • Show hidden devices.
    • Click the arrow next to keyboards.
    • Right click on the name of the keyboard device.
    • Select uninstall.
    • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
    • Restart the laptop twice.

    Touchpad:

    • Type of research, "Device Manager."
    • Click on Device Manager,
    • Expand mice and other pointing devices.
    • Right click on the TouchPad,
    • Click on uninstall.
    • Restart the computer laptop twice,
    • Reinstall the TouchPad card.

    I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

    The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

    Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

    This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

    If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

    Thank you!

  • Problems with ports ethernet E4200

    I have problems with my ethernet ports on my router E4200 V1.  I do not get on flow rate of 12 Mbps on a single connected wired computer.  If I replace it with a simple switch 5 port I get 60 Mbit/s using the same cables.  I looked through the creation and cannot come up with any solution.

    Any help would be greatly appreciated.

    Thank you

    Mike

    OK I tore across the network.  Started from scratch and found the problem.  It is quite strange, but everything works fine!

    I discovered through the process of elimination that the cisco router did not like my Panamax Lan UTP.  Cisco is apparently more strict with the signal than the simple switch or refurbished netgear router.  I had the protection on the power strip 6 Max near the iMac.  The totally weird part is that slowed down the entire network.  Streaming is now pending on 60Mbps at each connection to the local network.

    Thank you all for your time I walked through this weird problem.

    Mike

  • How can I set up lightroom on the new laptop computer with SSD?

    I just got a new laptop from ROG from Asus with an SSD. I need help setting up lightroom. Should I keep my catalog of lightroom on drive C or move it to the D with all my Docs and Images?

    your catalog and images can be anywhere.  You cannot change the installation of your drive c. Lightroom and creative Cloud FAQ directory

  • Pavilion 15 laptop: problems with stop and "standby" mode.

    I upgraded from windows 8.1 for windows 64 bit home 10. I had problems with stop and goes into sleep mode and cannot be resolved, then I reinstalled windows 10. Everything worked fine for a few moments, and then the same problem reappeared. I can't stop or put my PC into sleep mode, unless I have first of all to make a restart. After a reboot, I am able to stop or go to sleep mode without problem. If I try to do either without a restart, the screen goes black and the indicator light remains lit. The only way I can get it to start then press on and hold the power button and force a shutdown down, then press the power button to restart the upward. I have another PC, a wafer think that Lenovox has been upgraded to windows Windows 7 10. This PC work fine with windows 10, no problem at all. It's just the HP Pavilion 15 who has these questions. It makes me crazy.

    Look through the tool of troubleshooting possible solutions here:

    http://support.HP.com/us-en/document/c03383935

  • Problem with port 20 on ProCurve 2910al - 48G - POE

    I recently sent 5 x ProCurve 2910al - 48G - POE switches connected to 2 x ProCurve 5412zl.  I have a problem that port 20 does not seem to work on all 5 predisposees.  What is a config problem?

    We had the same problem

    We have upgraded to the latest version of 14.38 and seems resolved.

    probably wasn't available when you had the problem

  • New creation problem with Vista HP restore point

    My laptop, a sony vaio VGN FE-890, developed all of a sudden a group of problems, slowdown, programs responds not, printer won, t etc load.

    I'm doing a system restore but all my restore points went off the menu except for a restore at the present time and date. When I try to create a new restore point it will only ask for a name, and then creates a new restore with the date and the current time point. I need to restore to a week or more in the past. What I am doing wrong?

    If you don't see more of 1 restore point, that's all you have. If each time that you create a new, the previous 'disappears' my first suspicion is that you don't have enough space allocated to store more than 1 restore point. This article tells you how to investigate your system restore benefits:

    http://blogs.TechRepublic.com.com/window-on-Windows/?p=1077&tag=nl.E132

    This article is general information about the system restore:http://www.davescomputertips.com/newsletters/2010/101101.php

    If this isn't the problem, the next thing I see is that you have some sort of automated process of 'cleaning up' configuration 'extra' restore points. This seems to be a remote possibility because most of the cleaning tools are not triggered by the creation of restore point, but I suppose it could be possible.

    There are many utilties of freeware that make the management of restore points a little more friendly that the native windows tools, here is a link to one of them:

    http://www.thewindowsclub.com/System-Restore-Manager-for-Windows-released

    Please click on the "useful Vote"button! ".

    If this proposal of solution solves your problem, please mark it as propose as answer to let others know the solution that worked for you

Maybe you are looking for

  • a bug in emergency calls

    Hello IAM Iphone - 6 more user. I found a bug in emergency calls, while the iphone is locked.

  • How to synchronize two profiles in firefox, everything except localstore.rdf

    Yesterday, I asked about the binding cache between two profiles in firefox: https://support.Mozilla.org/en-us/questions/925836 And I got to thinking. The only reason why I'm even a second profile is to have two 'places saved window' for purposes of m

  • Loss of quality when recording in pdf format

    Hello I did a post card, I have pages, but when I save it as a pdf file, that it loses quality and society who do it says the quality is bad and the picture will come out blurry on the cards. What should I do? I hope someone can help! Natascha

  • Need to transfer from iPhone to iTunes apps

    I had to perform a new installation of OS 10.11 El Capitan. Doing so removed my apps (I think my music library is OK...) - so I have all the apps on my iPhone. The issue is - as I can't synchronize without wiping the iPhone with nothing library on my

  • How to remove "HP recovery manager" from the start menu?

    A year ago, I had a virus attack on my computer. Knocked it completely. In the process of reinstalling the computer, HP Recovery Manager was added to the start menu. Now I need to remove it in the start menu because it takes an unnecessarily long tim