New on IDM

Hello

I'm new IDM

We have an ASA 5520 with module 10 IPS.

I wanted to know how the traffiic will sink in & out

My thoughts: from the outside Internet > IPS > FW > LAn

is it good?

Hello

Well, you can configure the IPS module of the asa cli only. It is based on the desired mode. promiscous or inline.

If you configure mode promiscous a copy of the package is sent to the module AIP-SSM-10, in this case it will act as IDS.

If you configure in inline mode, then the traffic comes from inside and outside the ASA interface, then it will be sent to the module AIP-SSM-10, but do not forget to configure "bypass mode on.

load will always be there on the firewall because the module is integrated.

and he has to transfer traffic to the module.

hope that your doubt is cleared.

Tags: Cisco Security

Similar Questions

  • Update IDM 8.1 to 8.1.1 newest

    Hello, I am new in IDM/newest to be upgraded to 8.1.1 (from 8.1) on Red Hat Linux 5.

    I downloaded the installation zip file into a directory in / opt

    Upgrade guide is said to use the GUI installation. Where do you find this installation GUI?

    Thank you

    UN - jar jar file install and you will see what you need. I hope this helps.

  • FMW: Links Portal Upgrade Advisor to the page build Middleware of Oracle 11 g Architecture

    Perhaps a link in the Advisor to each document for installation/upgrade is needed.   Would be very useful.  And, if the document refernence is not specific to the step, but it is more general in nature, then a shor comment indicating to view only the relevant sections of the document.   That, to me, would be the most valuable contribution.  Please ask for clarification if necessary.   The page I am referring here would be 'Building the Middleware of Oracle 11g Architecture basis'. Each of the steps listed there is extremely useful.   Also, small change to it would be great for it is according to put it as follows in the next video that Dan is putting together to address upgrade scenario.

    And as mentioned in a previous debate. Would be really nice if we know exactly what is supposed to be running for each of these steps.  Not so much after we're done, but how to start.  Also, what environment should be set to.

    Example: Ensure that portal db, earphone, IDM and former/current levels are rising and runing and environment is set for new construction/PFRD area (where are the new binaries) for the portal 11g Upgrade Wizard.

    Example: Ensure that db, listener, old idm level runs and defined environment to the new layer IDM of IDM Upgrade Wizard.

    NOTE: These are examples only and may be wrong, but (and please let me know if so)... There you have something to run with.

    FYI... So I made changes at the stage 'The base Middleware of Oracle 11g Architecture site'... so we have documentation References inline + some additional details added. When you find the time, take a look and let me know if the changes are for the clearest reading / understanding of the build process.

  • Add IDM to the list of add-ins checked

    Older versions of Mozilla Firefox allowed for Internet Download Manager module and I used it frequently, but with the last update I can use it is no longer. When will this fix?

    Thank you!

    Hi ragempa, Mozilla announced a procedure for publishers of extensions to submit them and get them signed by the team of modules. No doubt IDM will do it later. But it shouldn't be compulsory...

    In the final version of Firefox 40 and 41, the signature requirement is not applied, there is only a warning. If your says the extension is blocked because it is not signed, please check the following parameter:

    (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

    (2) in the search above the list box, type or paste the xpi and make a pause so that the list is filtered

    (3) if the preference xpinstall.signatures.required is in bold and "user set" true, double-click on it to set it to false

    If that is already set to false, then another problem with the add-on that is originally not not to work. Could check you updates IDM?

  • I need a script IDM (internet download manager) for Firefox Version 6

    I installed Firefox 6, very perfect, but when I download a file, the script he used to Firefox 5 is not compatible. What could a person get? Thank you very much

    What version of IDM you have installed?

    http://www.internetdownloadmanager.com/

    New! Internet Download Manager v6.07. Fixed compatibility with different browsers, including... Mozilla Firefox 6...

  • new faucet botton has stopped working after a few updates

    Hi, FireFox has had a few updates for IDM modules as usual, but after he (new tap botton) stopped working, even the new tap since the right-click option does not work, please help

    Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

    There are a few places to check for the Ask toolbar:

  • IDM does not work for firefox 4.0 b4

    When I want to download firefox IDM somethings doesn't download from firefox 4 b 4

    Guys, I found this to be a better solution, because I don't like the new versions of IDM.

    http://blog.Tabinda.NET/Apple/IDM-and-Firefox-4-integration/

  • EMI & IDM

    Hello friends,

    What is the difference between the EMI and IDM, I think that the IME is the replacement of the IDM and IDM is compatible with an earlier version of IOS IPS. ??? Please correct me if I'm wrong Mr. I m much new IPS.

    Thank you

    IDM is just a single device manager.

    While the EMI can manage multiple devices, the collection logs, navigating through them a CETS etc etc.

  • Help to start with the suite Oracle IDM

    Hello

    I am new to Oracle IDM, can anyone advice me on where to start and how to work later?

    Oracle IDM Suite is a very large area...

    To learn: -.

    (1) to join an organization that works in it (I guess you have already done)... Your elders help you a lot...

    (2) edelivery.oracle.com, VM section, download the VMS to Linux (or windows)... I hope your elders can do it too...

    (3) then follow online documents provided by the Oracle: -.

    Oracle Fusion Middleware version 1 (11.1.1.5) (11g R1)
    http://docs.Oracle.com/CD/E21764_01/index.htm

    OIM 11G R2: -.
    http://docs.Oracle.com/CD/E27559_01/index.htm

    (4) install OIM 11 G R1 (and after a few weeks 11G R2 too) via the steps described in

    Oracle Fusion Middleware Installation Guide for Oracle Identity Management (for 11g R1)...
    http://docs.Oracle.com/CD/E21764_01/install.1111/e12002/TOC.htm

    (5) installers are available on the website of Oracle and edelivery.oracle.com

    Happy learning...
    Welcome to the world of the IDM...

    I hope that it will be Correct start...

  • Linking the accounts on new resources

    Hi all


    In an existing IdM 8.1 environment, I have to add two new resources. I modified the role definitions without users update, now I want to link the new resource with ActiveSync process accounts.

    I realized I can link the user resource accounts to tabs and it works correctly, but running ActiveSync can't "CONFIRM" link account.

    What Miss me?

    Thanks in advance,
    KK.

    Previous answer was a little off :D

    -> Rule of correlation find matching user [s]
    Rule of confirmation-> Confirm?

    At least, I hope it works, we do not confirm it since our correlation will bind 1<->1
    where our index counts on this resource is UNPARALLELED __UNKNOWN__, but is not serious for us since we have
    This allows to refresh the display anyway...

  • IDM / unable to load the mail service provider

    Good day, I'm having the same problem here on IDM 11 g,

    When I try to 'Reset password' for Identity Manager user - delegated Administration
    I have used the following "manually change the password"
    and I select "The new password to the user in e-mail."
    I get the following error "an error has occurred. While changing the user password Could not load the e-mail service provider.
    IDM modifies the password "the password has been changed with success." but still no email sent
    When I use another option 'self-generate (randomly generated) password"no e-mail is also sent.

    Can you please help with this question?

    Create a resource of type e-mail server. Resource name must be the same as specified in the system pripert XL. Mail server. Bydefault his name is the mail server. Provide details of your mail in Server resource.
    Yes authentication
    Name of the server
    User login
    User password

    After doing this, reset the user's password, which the profile e-mail address.
    Check if it works.

    Kind regards
    GP

  • Unable to establish a connection with IDM DB

    Hello
    I have a java code which updates user table in the staging table. His task in process adapter. Please help me find the error - I am not able to establish a connection with IDM DB. The error I get is 12/02/27 03:31:36 nameIDM of IT resources
    DEBUG, February 27, 2012 03:31:36, 767, [XELLERATE. API], class/method: tcITResourceInstanceOperationsBean/findITResourceInstances entered.
    DEBUG, February 27, 2012 03:31:36, 774, [XELLERATE. API], class/method: tcITResourceInstanceOperationsBean/findITResourceInstances to the left.
    ERROR, February 27, 2012 03:31:36, 778, [COM ROSS. IAM. IOM. GENERATEUSERATTRIBUTE], could not initialize: Thor.API.Exceptions.tcAPIException: index of the line out of bounds


    Here is the code:

    package com.ross.iam.oim;

    import java.sql.Statement;
    import java.sql.Connection;
    to import java.sql.DriverManager;
    import java.sql.ResultSet;
    import java.sql.SQLException;
    import java.util.HashMap;
    Import Thor.API.tcResultSet;
    Import Thor.API.tcUtilityFactory;
    Import Thor.API.Exceptions.tcAPIException;
    Import Thor.API.Exceptions.tcColumnNotFoundException;
    Import Thor.API.Exceptions.tcITResourceNotFoundException;
    Import Thor.API.Operations.tcITResourceInstanceOperationsIntf;
    Import Thor.API.Operations.tcUserOperationsIntf;
    import com.thortech.util.logging.Logger;
    import com.thortech.xl.dataaccess.tcDataProvider;


    public class changeUsrEndDate {}
    Private static final Logger log = Logger.getLogger (GenerateUserAttribute.class.getName ());
    private tcUserOperationsIntf usrOps;
    private tcITResourceInstanceOperationsIntf moITResIntf = null;
    private String DBDatabaseName;
    private String DBDriver;
    private String DBUser;
    private String DBPassword;
    private String DBURL;
    Connection con = null;
    String itResourceName = null;

    public changeUsrEndDate()
    {
    }

    public changeUsrEndDate (dataProvider tcDataProvider, String itResourceName, String UserID, String Password, String DatabaseName, String URL, String Driver) bird Exception {}
    try {}
    String hashkey = null;
    Dim hashvalue = null;
    String itResourceName = null;
    this.usrOps = ((tcUserOperationsIntf) tcUtilityFactory.getUtility (dataProvider, "Thor.API.Operations.tcUserOperationsIntf"));
    this.moITResIntf = ((tcITResourceInstanceOperationsIntf) tcUtilityFactory.getUtility (dataProvider, "Thor.API.Operations.tcITResourceInstanceOperationsIntf"));
    HashMap itResNameMap = new HashMap();

    itResNameMap.put ("TI Resources.Name", itResourceName);
    System.out.println ("Name of the resource IT" + itResourceName);
    tcResultSet itResourceRes = (itResNameMap) this.moITResIntf.findITResourceInstances;
    itResourceRes.goToRow (0);
    long itResKey = itResourceRes.getLongValue ("TI Resources.Key");
    System.out.println ("it resource key" + itResKey);
    HashMap itResKeyValueMap = new HashMap();
    tcResultSet itResKeyValue = (itResKey) this.moITResIntf.getITResourceInstanceParameters;
    System.out.println ("Value of the IT resource" + itResKeyValue);
    rowCount int = itResKeyValue.getRowCount ();
    for (int j = 0; j < rowCount; j ++) {}
    itResKeyValue.goToRow (j);
    System.out.println ("row" + j);
    hashkey = itResKeyValue.getStringValue ("IT Resource Type Definition.IT Type Parametr.Field resource name");
    HashValue = itResKeyValue.getStringValue ("IT resources Type parameter Value.Value");
    itResKeyValueMap.put (hashkey, hashvalue);
    }

    DBDatabaseName = ((String) itResKeyValueMap.get ("DatabaseName"));
    System.out.println ("DatabaseName" + DatabaseName);
    DBDriver = ((String) itResKeyValueMap.get ("Driver"));
    System.out.println ("Driver" + DBDriver);
    DBUser = ((String) itResKeyValueMap.get ("UserID"));
    System.out.println ("userid" + dbuser);
    DBPassword = ((String) itResKeyValueMap.get ("Password"));
    System.out.println ("password" + dbpassword);
    DBURL = ((String) itResKeyValueMap.get ('URL'));
    System.out.println ("URL" + DBURL);

    }
    catch (Exception e) {}
    log. Error ("failed to initialize the:" + e);
    }
    }

    public String usrRecords (String userEndDate, String ntLogonName) throws tcITResourceNotFoundException, tcAPIException
    {
    HashMap usrMap = new HashMap();
    Statement stmt = null;
    Instruction stmt1 = null;
    ResultSet results = null;
    ResultSet results 1 = null;
    ResultSet 2 = null;
    String result = null;
    usrMap.put ("USR_END_DATE", userEndDate);
    System.out.println ("end user date" + userEndDate);
    usrMap.put ("USR_UDF_NTLOGON", ntLogonName);
    System.out.println ("ntlogon username" + ntLogonName);
    try {}
    System.out.println ("before the get connection" + con);
    con = getConnection().
    System.out.println ("get connection" + con);
    results = stmt.executeQuery ("select * from ud_co_extn_q where udf_extn_ntlogon ='" + ntLogonName + "' and udf_extn_extended IS NULL");
    While (results.next ()) {}
    System.out.println ("inside any block");
    Results 1 = (stmt1) .executeQuery ("select USR_END_DATE from usr where udf_extn_ntlogon ='" + ntLogonName + "'");
    2 = (stmt1) .executeQuery ("update ud_co_extn_q set udf_extn_extended =" + userEndDate + "where udf_extn_ntlogon ='" + ntLogonName + "'");
    }
    }
    catch (SQLException to) {}
    log. Error ("Exception occurred - SQL Exception:" + se.getMessage ());
    se.printStackTrace ();
    log. Debug ("cleanup of resources DB");
    try {}
    Results.Close ();
    results2. Close();
    If (stmt! = null)
    stmt. Close();
    If (this.con! = null)
    This.con.Close ();
    } catch (SQLException ex) {}
    log. Error ("an error occurred during the cleanup of resources DB" + ex.getMessage ());
    }
    } return result;
    }

    Private connection getConnection () throws SQLException
    {
    Try
    {
    Class.forName (DBDriver) .newInstance ();
    } catch (InstantiationException e) {}
    } catch (IllegalAccessException e) {}
    } catch (ClassNotFoundException e) {}
    }

    Connection con = (Connection) DriverManager.getConnection (DBURL, DBUser, DBPassword);
    con.setAutoCommit (true);
    return con;
    }


    }



    Please suggest if anyone were facing a similar situation.


    Thank you
    Kalpana.

    two things I noticed here

    1. you don't have createStatement() call before executeQuery
    2. you must use executeUpdate() instead of executeQuery()

    use as below
    Statement st = con.createStatement ();
    ResultSet rs = st.executeUpdate (query);

    IF you are using 10 g and am trying to update DB why not try below

    dataSet tcDataSet = new tcDataSet();
    dataProvider = getDataBase() tcDataProvider;
    String oneTimeQuery = "SELECT count (*) AS the account OF UGP.
    + ' WHERE UPPER (UGP_NAME) =' "+ group +" ' ";
    dataSet.setQuery (dataProvider, oneTimeQuery);
    dataSet.executeQuery ();

    Look below at the link to update the db in 10g
    update in tcDataSet query

    -nayan

  • IDM 8 Glassfish-&gt; WebSphere 6.1 migration: java.lang.IllegalStateException

    Hello.
    I'm migration of an installation of Sun IDM 8.0.0.5 Glassfish to WebSphere 6.1 (same reference), following the installation manual WS of Installation instructions.
    Once the new war has been deployed on WebSphere, and the application is started, pointing my browser on idm I get this error

    java.lang.IllegalStateException: the mistake of trying decrypt: given the final block not well padded

    It occurs even if I try to get information on the repo with the command: lh setRepo - c
    It seems to be a java problem, because if I export the path of Sun JDK in the JAVA_HOME variable (the same used by Glassfish), setRepo doesn't work. IBM JDK using supplied with WebSphere, I get the error.
    So it seems to me that the application cannot read objects from the repository because of different java provider (IBM and Sun).

    Any suggestion?
    Thank you

    O

    I don't think that there is something that you can do to work around this problem. If you use the SQLServer repo and you must use IBM JDK, you will get the error 'not well padded', assuming that you can't move on to IDM 8.1 or later. The problem is that in the repo of SQLServer data is encrypted using a schema IDM can decipher is no longer due to the change of the JDK.

  • IDM 11g Installation error

    Hello
    I tried to install Identity Management 11g as part of our test of Fusion Middleware environment, but I could not do through the Installation.

    I want to install IDM 11 g, just Oracle Internet Directory with directory, Oracle, Oracle Directory Services Manager and Fusion Middleware integration platform control in a new Administration of WebLogic domain (do not select Federation identity or virtual directory)

    All prerequisites are met, any verification passed.

    I use Weblogic 11 g (10.3.1), all on an OEL 5.2.

    The error I get is at the stage of the progress of the Configuration in the configuration of Bootstrap area section and in the Create Domain part.

    The logs show:
    oracle.as.provisioning.util.ConfigException:
    Error creating u01/oracle/app/wl_10.3/user_projects/domains/IDMDomain domain.
    Cause:
    An error of WLST.
    Action:
    Check the logs for more details.
    at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
    at oracle.as.provisioning.weblogic.ASDomain._createDomain(ASDomain.java:2864)
    at oracle.as.provisioning.weblogic.ASDomain.createDomain(ASDomain.java:2463)
    at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:631)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:388)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:870)
    at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:660)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:82)
    at java.lang.Thread.run(Thread.java:619)
    progress in progress2 calculation

    I am looking this newspapers:
    ./oraInventory/logs/oraInstall2009-07-21_07-17-11AM.out
    ./oraInventory/logs/install2009-07-21_07-17-11AM.log
    ./oraInventory/logs/install2009-07-21_07-17-11AM.out

    Don't know where to to watch or what means this error.

    If some can help thank you in advance.

    Best regards.

    OK, problem solved.

    As I said in the first post, this has been implemented on our test environment so we have several installation here.

    The problem is that I chose the poor reception of WebLogic, I tried to install IDM 11 g using a home a WebLogic 10.3 instead of the 11 g version (10.3.1). Steps to fix the problem:
    (a) cancel the installation
    (b) run the runInstaller.sh with the - uninstall option and uninstall the Oracle Instance
    (c) to rerun the Setup program and by changing the House WebLogic and related paths to the version of WebLogic 11 g (10.3.1) home

    I would like to point out some things about this situation:

    (1) the installation program automatically selects the first WebLogic installation on the server, it is not serious is not the recommended version

    (2) the installation program never said the 10.3 version is not supported or the origin of this problem

    (3) newspapers say nothing about what is the main cause of the error

    Hope this helps.

    Best regards.

    Published by: higher on 5 October 2012 09:42

  • I changed my Apple ID to my new married name, but somewhere it is still hanging on to my old details

    After getting married, I updated my Apple ID with my new name and e-mail address.  This well it worked and I can access iTunes etc but my iCloud storage is almost full and I tried to connect to improve it but it still shows my old email address and name.  I can't connect to it knowing that I replaced all the details so the old account doesn't really exist, but it will not display my new address.  I went in my Apple ID to see where he was always picking up the old name/e-mail since but there just my new details (as it should) and I don't see where it's always the old details.  How to forget my old data.  I have almost no storage iCloud and have no way to resolve this issue now.

    Thank you very much

    When you update the primary e-mail address on an account, you must then sign and return in everywhere that the account is used: what to do when you have changed your Apple ID email address or password - Apple support

    If you are being invited for the password of the account when you try to disconnect from the iCloud on the device and the computer test: If iCloud asks you the password to your Apple ID - Apple Support previous

Maybe you are looking for