New phone, new SIM but no service and selected network unavailable

Similar Questions

• I cannont turn on automatic updating. I have is gray. Disable the automatic update is selected but also gray and selected.

  I cannont turn on automatic updating.  I have is gray.  Disable the automatic update is selected but also gray and selected.

  you have the service disabled?

  Click Start > run > type in services.msc box and Microsoft Management Console will be open.

  Search for automatic updates. Right-click the line, and then click Properties. In the dialog that opens, make sure Startup Type is automatic. Click on apply. Wait for it. Then click Start under Service status. You will see another pop-up window but it is a progress bar. If the service does not start, you will get an error. Otherwise, you will see wuauserv in the Task Manager. You should also see the yellow shield which shows you download updates. Also check your Windows Firewall and third-party firewall installed on the machine. Another place is the router/modem. You may need your ISP to help with the party.

• Stream Podcast shows of new episodes, but feed validators and subscribed itunes do not update

  Hello everyone, I ran a rather strange problem this morning during the release of my latest podcast episode.  When I publish a new episode, it appears in the flow, but it will not appear in itunes.  I know that there is a delay for the itunes store to show the episode but the episode shows when I check with a subscribed podcast app.

  Here is my podcast on itunes:

  https://iTunes.Apple.com/us/podcast/Church-collective-worship/id672308308?MT=2

  The last episode is in the RSS feed and as far as I know, everything looks ok:

  http://thechurchcollective.com/Podcast-RSS

  But when I look at the flow through a feed validator, it won't show the most recent episode of today.

  While trying to figure out what might be the problem, I tried to put the audio from today in last week's episode (108) and when I go there to play, he continued to play audio from last week even though the RSS feed shows that I put another file in the enclosure.  If for any reason, the stream no is not updated even if it is actually updated.

  Thanks in advance for your help, I've learned a lot already just looking through this community.

  The store, by subscribing in iTunes and the stream itself illustrated all episode 108 as the last and at the reading of the episode in iTunes that it promises to be 108.

  Your web page to the http://thechurchcollective.com shows an episode (number 14), dated today. It has a built-in Soundcloud player, which seems not to be the case with episode 108, and such a player will not work in iTunes (if it's probably why Wordpress is not placed in the flow).

• Can't install new applications but can download and install the updates very well!

  Hello world

  I want to install the trial after effects CC version and downloaded Premiere Pro, SpeedGrade and Photoshop tests successfully, but when I try to install After Effects, I get the message "Waiting."... "and then after a few minutes I get the message"No. Internet Connection. This also applies to other applications that I have tried (Illiustrator, for example).

  I did what the help docs have said, for example disable my firewall, restarted, etc..,. None of this works, nothing will install (except app updates work very well!), so I am very confused. I obviously have a connection, so I don't know where to go from here

  I'm reaching the end of my tests (I have 4 days left on my Premiere Pro trial, which was an app I downloaded previously), which would have something to do with it?

  Can someone help me?

  Thank you!
  -Jeremy

  Please see the Ko: http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html .

  Kind regards

  Romit Sinha

• iPhone 4S has No Sim, but there service?

  SO I bought an iPhone 4S off the coast of craigslist, and I used my sim eject to get a sim card, but when I opened, there is no sim card, but my camera has service. It has Sprint. It's weird because even if she has the service, messages and calls can be made. I was wondering how I could make it work.

  I thought you said he already has service, so it works. Maybe you can explain what it is you want?

• Wireless and wired network unavailable

  I tried to install XP SP3 on my X 60 laptop. To restart, I couldn't use any network. The LEDs show the wireless as the work, but when I try to use the lenovo or wireless to power to the radio, she continues to declare that 'off '. Also, I can not connect via the wired ethernet port.

  No network adapter appears in my network connections. The devices will appear as normally works in Device Manager and I can update or restore the drivers for them, but I can't uninstall. I can boot to safe mode, but a start in SafeMode with network causes the system to hang during the "checking the status of the integrated security chip.

  Uninstalling SP3 update made no difference.

  Someone can offer more to try, running a new installation of XP? I feel there is just a corrupted somewhere file.

  Thank you

  TD

  Problem solved! It seems that my registry has become corrupted in a way that was also known when SP1 came out:

  http://support.Microsoft.com/kb/329441/en-us

  Removal of two key and restart seem to have cured the problems.

  Toby

• Shared services and the workspace URL do not work in the EPM 11.1.2.2 system

  Hello
  Shared services and the workspace URL do not work in the EPM 11.1.2.2 system
  I installed the EPM V11.1.2.2 system in the single server environment (MS 2008 Server R2) with the following components:
  * Foundation Services
  * HFM
  * FDM
  
  Have used embedded Weblogic server as a web application server and Oracle HTTP server as a web server. The installation was successful.
  During configuration.
  (1) I selected the option to deploy applications web SSP and workspace to a single managed server. Applications deployed successfully at EPMServer0.
  (2) in addition, I have selected to configure Oracle HTTP server as a web server.
  These two steps were successful.
  
  But shared services and the workspace URL do not work. We get a 404 error.
  Shared services: http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
  Workspace: http://inmum01hyp05.internal.vodafone.com:19000 / workspace /.
  
  When I checked the EPMServer0, Weblogic administration console is in SHUTDOWN State, tried to start it but it goes by State ADMIN instead of RACING.
  Checked the newspaper EPMServer0 to 'D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs' and found the error at the end of this message.
  
  Can someone please suggest a solution for this.
  
  # < 6 June 2013 11:43:20 IST > < emergency > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200246 > < BEA-149259 > < server 'EPMServer0' 'EPMServer' is high in the State of the administration due to the failure of the deployments. >
  # < 6 June 2013 11:43:20 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200902 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceHttps for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceJms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseService for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201106 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Jms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12 for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Https for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebLogicServer > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201137 > < BEA-000256 > < Invoking weblogic.transaction.internal.StartupClass.main (null) >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149059 > < dms.war request DMS Module [Version = 11.1.1.1.0] changes from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149060 > < dms.war DMS [Version = 11.1.1.1.0] request Module successfully go from STATE_PREPARED to STATE_ADMIN on server EPMServer0. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149059 > < inspection.wsil STATE_PREPARED request Module, wsil-wls is transition to the STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149060 > < inspection.wsil request Module wsil-wls successfully moved from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:44:13 IST > < Info > < Diagnostics > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1370499253433 > < BEA-320000 > < Diagnostics of the subsystem initializes on the server EPMServer0. >
  
  Thanks in advance.
  TEJ

  Hi all.

  Thanks for all your useful contributions.

  Finally, the reconfiguration is successful.

  Yes John, the problem was with the deployment, but was not able to understand what goes wrong with the deployment.

  Tried to uninstall clean twice with the deletion of registry. Last updated variable of path by removing all entries related to Hyperion during the uninstall.

  Installation and configuration was successful after that. In addition, I did not compact deployment this time and used separate web servers to the deployment.

  Finally, Shared Services and the workspace URL work correctly.

  http://servername:28080/Interop/index.jsp

  http://servername:28080 / workspace /.

  Kind regards

  TEJ B

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• Hi, I have Internet data in my package and I just switched to iPhone 5 4 s, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Hi, I have Internet data in my package and I just switch to an iPhone a 4S 5, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Contact your carrier and make sure that your account is configured correctly. Then go to settings/general/to comments and press the network name; This will cause the exceptional carrier updates to install (you will see a dialog box saying if an update is needed). In addition, go to settings/general/reset - Reset network settings if none of these fix. You will lose the WiFi passwords, but nothing else.

• I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?

  I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?  I transfer a 5s to itself.

  For your photos, try importing them to your computer and their synchronization then back to the SE.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  For your texts, they moved with the backup restore?

• Have a new 6 but cannot get it to sync with iTunes on my Mac. The two systems have system updates (and both confirm). How can I update iTunes on my phone when he said the latest version?

  Have a new 6s, but cannot get it to sync with iTunes on my Mac. Both systems have system updates (and confirm the latest version). How can I update iTunes on my phone when he said the latest version?

  The message to update iTunes refers to iTunes on your Mac - is your Mac on a high enough version of Mac OS X to support the required iTunes version? If this isn't the case, then your Mac can be changed?

• Don't buy used iPhone 4s, prechecked IMEI whicated it was NOT stolen, however I had no idea of locking Activation. I did buy and install the new sim card, but I'm locked out. New Sim Card would make a difference? Original owner cannot know

  The installation of a new Sim Card would affect the ability to unlock Remote Activation?

  I bought a used iPhone 4s, prechecked IMEI number, which indicated that it was not stolen, but I had no idea on the lock activation. Former owner is willing to work, but can't figure out what to do (I emailed the help pages Apple), would be the fact that I have installed the Sim Card have affected something

  Locking activation is a feature of security built into iOS. Please seethis support document to learn more about locking Activation.

  My suggestion would be to contact the original owner and ask him to enter the identifier Apple and password so that you can disable find my iPhone.

  I hope this helps.

• C168i: unlocked from at &amp; t, but unable to connect to the network with the new SIM card

  I brought my c168i from the USA and I can't use it in my home country. I unlocked the phone to at & t, but it connects to the local network with the new SIM in there. It shows "not available" or "no service". What is going on??

  If you look at Australia GSM worldwide site, you will see which bands are available in your area. If the bands including the phone does not match the country you are located in the phone up with will not get service. Not all bands are available in all areas. In my view, that the phone only has GSM 850/1900 GPRS. This would mean that you get only service when GSM 850 is available that I don't see 1900 in Australia.

  Mark

  Support Forums Manager

• How to complete the implementation of process after inserting the new sim card to unlock the phone

  Try to unlock the phone more 6s with ATT, but do not know how to perform the implementation of process after inserting the new sim card. I got the unlock code confirmed att.

  After the unlock code is confirmed, you will have to restore the unit to the factory via iTunes settings.  He must inform you that the device is unlocked, THEN you change sim cards.

• On the calendar if I create a new event on my Mac it syncs to my phone automatically. But if I create a new event on my phone it is not sync on my Mac please help!

  On the calendar if I create a new event on my Mac it syncs to my phone automatically. But if I create a new event on my phone it is not sync on my Mac please help!

  Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.

  Have you tried the signature to iCloud and then reconnect?