New PPr upgrade and memory problems now

Similar Questions

• Toshiba A50-frequency of 106:FSB Bus and memory problem

  Hello
  I have a problem with my new Toshiba A50-106. There are Celeron M 1, 5 GHz inside. That all specifications for this processor FSB speed should be 4x100MHz and for my memory bus speed should be 2 x 133, but when I check in SiSoft Sandra 2004 I see 4x187MHz (748 MHz) FSB and the speed of the Bus of Mem 2x249MHz (4 98 MHz). I can't fix it myself, because there is no such option in the BIOS and there is no standard software from Toshiba.
  Consequence of this is the problem of the temperature of my cpu. It is on average 54 c in an idle state.
  Perhaps you have had the same problem or knows what is in him and you can help me.
  What is a temperature average of your Celeron M?

  Thank you in advance,
  Michael

  Hi michael,.

  to your first question, have you run Sandra 2004 in battery mode because in battery mode CPU manages to set the speed of the FSB and memory also bus speed!

  So, try once more on AC power mode and let me know the results.

  Also, you should check these results with different bechmarking systems because these programs work differently.

  @ temperature problem: there is problem o with 54 HP. The home page of intel, said a 125 C is the maximum and then the CPU stops automatically!

  Rudi Bye

• New video card and memory for my laptop (1410-604)

  Hello

  I think of a new video card and an extra memory...
  What possibilities I have to upgrade my laptop (Satellite 1410-604).

  I checked my computer technical description:
  I think I can add an extra 256 MB SDRAM. But what video card?

  Koen

  Hello guys

  It s not possible to update the graphics card. You can't compare the desktop with a laptop PC. The graphics card on the laptop is a small chip that attaches to the motherboard.

  On the upgrade memory: you can upgrade the memory maximum. 512 MB (2x256MB). There are 2 slots available and these modules of memory are supported:
  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)

• The HD upgrade and memory issues - Satellite P200D - 10 p

  Don't cancel the warranty if I upgrade the hard disk and the memory of my laptop?

  Also is there anyway to merge two partitions on my hard drive into one without having to reformat the whole disc? For some reason, the hard disk was split into two. The installation of Vista on a 73 GB and I have 74 GB free on another partition.

  I want to upgrade the memory from 2 GB to 4 GB. What are the compatible memory modules (I model P200D - 10 p)?

  Hello

  By reformatting the hard drive you really upgrade the HD and increasing memory is a fairly simple process, so you should not invalidate your warranty.

  However if you open any part of the laptop including the crypt of memory you should make sure what you are doing and can get compatible memory, preferably set in correspondence cards.

  The software you need to merge partitions on your hard drive while running Vista is "Paragon Partition Manager. Symantec Partition Magic does not work with Vista. You don't need to reformat your hard drive, but you'd be advised to backup your critical data before the merger. A word of warning before you do anything, if the second partion maintains records of resettlement for Vista if you encounter a failure, then after you merged the two partitions, the files will remain but the relocation will not work. This is because when you insert the disc to reinstall it will search that partition. A round way, that it is to make an image of your drive before you do anything, then you can always copy of backup image and reinstall your Vista back to the factory setting.

  If you have noticed that I posted above ask you about a memory problem because I also want 2 GB to 4 GB, but it won't have it.

  Hope this helps

• HP Deskjet 3510: Got a new router wireless and cant print now

  Got a new wireless network and now cannot print with new router. I have 2 change all the settings on my printer and how?

  Hello

  You must configure your printer to recognize your new router.

  That is why such a need to be done through your computer, please specify what operating system you are using.

  In addition, your computer is connected wirelessly or with an ethernet cable to your router?

• Help with the new card mother and Vista problem?

  So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

  b: use linux

  work of the restore cd to reinstall the OS, so I can use my new motherboard?

  So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

  b: use linux

  work of the restore cd to reinstall the OS, so I can use my new motherboard?

  Hey icuhavoc

  are recovery disks to reinstall vista with the original hardware installed if I understand you correctly know what records you need to know a set of manufacturer's recovery disks

  If it is pre-installed this is an oem license and does not change unless you did it in consultation with the manufacturer of models of motherboards and processors

  Walter, the time zone traveller

• Performance and memory problem

  Location:
  
  Have a mapping in Informatica (SDE), who joins about 15 tables from the OLTP database to create the staging table. This process joins the tables such as accounts, orders, and control elements. Great process that joins with very large tables. The process has been running in about 18 minutes, a change has been made.
  
  Change:
  
  Added three additional tables in the join (account tables and references) to pull 5 new fields. Two of these paintings are large enough with the third being small.
  
  
  Question:
  
  Now, the process that was running in about 18 minutes is more than 8 hours to run. If I take the SQL mapping code and run it in SQL Developer, it runs less than a minute.
  
  Possible cause:
  
  Don't know what the problem is that suddenly caused the process to change so dramatically. One thought is that the addition of three new tables in the join can be maxing some Informatica cache in temporary memory (storage). Looking at the workflow and I noticed that the size of the buffer of DTM has been set to 36 m. Not sure if this aspect will have to be increased, or if there is another parameter that we need change. Any insight and help would be greatly appreciated.
  
  Thank you...

  Better find an Informatica forum with expert tool specific.

  See you soon
  David

• New Firmware, id3 and ReplayGain problem tags

  I have problems getting a few metafields id3 showing correctly with the new firmware (1.02.26F).
  With the previous firmware, I used 'id3v2.3 + id3v1' type tag and it work perfectly, but with the new firmware it does not recognize the ReplayGain values. So I tried with id3v2.4, but now it does not recognize the metafield value type and with some files show strange values for track/Album Gain (e.g., dB-46 shows, 440, instead of + 3.56 dB. It is interesting-46.44 - 3.56 =-50; or dB - 48, 10, instead of + 1.90 dB. (- 48.1 - 1, 90 = mmm... okay, all mp3 files with track/Album Gain greater than 0.00dB show '-50.00 + realvalue'). If I play these files with ON Replaygain, volume will be very slow (as expected) and it is not possible to change the output volume (i.e., the output volume is the same what the Volume slider position is located, except in muted, which will cut.) I guess, because the gain is too important, volume slider to maximum is not enough to ensure that the output out of minimum volume).
  I mean, mp3 files with:
  -' id3v2.3 + id3v1' and "id3v2.3" types of tags, will not show Replaygain values;
  -' id3v2.4 + id3v1' tag types, does not recognize kind metafield.
  -the types of tags "id3v2.4", recognizes no Genre, artist, Album and title metafields.
  ReplayGain values - > 0.00 dB, will display an incorrect value.

  In addition, in the track info:
  -None of them show year;
  -List them all track number as xy, where x = TRACK number and y = TOTALTRACKS metafields.
  -Ditto for the number of the disk. XY, where x = DISCNUMBER and y = TOTALDISCS.

  I tag with foobar2000.

  In regards to the Vorbis comment, works perfectly.

  Does anyone else have this problem?

  Apparently there is incompatibility of all a rocket with foobar2000 mp3 QS.

  For the bug ReplayGain, Fuze will have problems reading the values with the "+" inside. I remove the workaround Nice '+' with Mp3Tag as shown here .

  This will also fix the value TYPE showing a minor issue "unknown."

  Date field still will not appear in the track info, although (zero size).

  Regarding the TOTALTRACKS thing, is how foobar2000 stores in id3 as explained here:

  [HydrogenAudio] Mapping tag foobar2000:ID3

  TOTALTRACKS: Stored in the same frame with TRACK number, separated by ' / ': for example "' 4/9.

  TOTALDISCS: Stored in the same frame with DISCNUMBER, separated by ' / ': for example "1/2 '.

  so Fuze displays the correct values, but it cannot show ' / '.

  Basically, marking with foobar2000 mp3 files:

  "ID3v2 writer compatibility mode" - ONE-> Fuze won't read ReplayGain values calculated by foob2000.

  'ID3v2 writer compatibility mode -' OFF-> Fuze will not recognize kind metafield.

• Satellite A300 - compatibility upgrade and memory module

  I have a Toshiba Satellite A300 and I want to upgrade the RAM.
  My installed memory's PC2-5300 555 but I can't find t the available is of 667.

  Is it possible to use that kind of memory?

  Hello, Harold

  Yes you can use it. Rams compatible are:

  1 GB DDR2-667
  PA3512U-1M1G

  2 GB DDR2-667
  PA3513U-1M2G

  Bye and good luck!

• C++ = > LV: array, pointer and memory problem

  Hello

  To research and spent a few days on this...

  I have the following function in C++, which returns a pointer(float *) in an array of float, I need to be dumped in a block of code. I created the DLL and I loaded it in the DLL to LV function (everything is ifne I see and I add the parameters) and accordingly implemented the following example. I then had to find a way to get the pointer to work. All the examples use U32, not a float... There is no float * double or type... back... How is it that is managed?

  So I think I'm sort of on the right track by searching and using the example here:

  http://www.NI.com/example/28672/en/

  I'm sure that isn't true, b/c I simulate the DLL code in MSVS and it works perfectly, but when I have the port, the data are bad... but I get size of 4 floats. ALSO... the memory of DLLS don't reset... so if I run it for the first time, it will calculate the data for n = 0 ==> = 1000 n (see photo), but the next run instead of repeat when I press play, data will begin to n = 1000, ==> n = 2000 all I want to do is pass an array of size 3 type of float data our of my DLL , and in labview... race LV and then stops, the memory will NOT keep its value but reset...

  Here's the function, call others, but you can see:

  char * getYawPitchRoll (float Gx, float Gy, float Gz, float Ax, Ay float, float Az, __int32 msTimeStamp)
  {
  char * YPRptr = YPRDEG; SIZE OF 3 FLOATS DATA TABLE
  getYawPitchRollRad (Gx, Gy, Gz, msTimeStamp, Ax, Ay, Az); written in an array (float) of global variable 'YPRDEG '.
  UpdateYPRDEG();
  Return YPRptr;
  }

  Also attached photo of LV code and library settings *.

  Why is it so ridiculous for LV to manage?

  Please help, I'm out of gas here.

  Thank you

  -Peter

  You must change the table Type, then set the table on pointer data in Table Format. I've never had this problem with variables keeping their previous value and my C is a little rusty, so I'm not sure your problem of Globals. If they are initialized on charge then Taki solution should work, even if repeatedly loading and unloading of the dll should not be necessary. Or maybe you could initialize the when you call your main function? MC

• Delete / external swf or the files in the flash file main to unload and load a new swf file and memory garbage collection.

  I can't delete / unload the example swf files external when the carousel.swf (portfolio) appears and press the button about the content overlaps the carousel (portfolio). How can I delete / unload an external swf file in the main flash file and load a SWF, so that at the same time remove garbage collection memory operation?

  This is the error messages I receive: "TypeError: Error #2007: child parameter must be non null.»

  at flash.display::DisplayObjectContainer/removeChild()

  " to index_fla::MainTimeline/Down3().

  Import nl.demonsters.debugger.MonsterDebugger;

  var d: MonsterDebugger = new MonsterDebugger (this);

  stage.scaleMode = StageScaleMode.NO_SCALE;

  internship. Align = StageAlign.TOP_LEFT;

  stage.addEventListener (Event.RESIZE, resizeHandler);

  is the charger for the portfolio page swf

  var loader: Loader;

  var loader2:Loader;

  var loader3:Loader;

  var loader1:Loader;

  resize the content

  function resizeHandler(event:Event):void {}

  resizes the portfolio page to Center

  Loader.x = (stage.stageWidth - loader.width) *. 5;

  Loader.y = (stage.stageHeight - loader.height) *. 5;

  resizes on page to Center

  loader3.x = (stage.stageWidth - 482) *.5 - 260;

  loader3.y = (stage.stageHeight - 492) *.5 - 140;

  * loader2.x = (stage.stageWidth - 658.65) *. 5;

  loader2.y = (stage.stageHeight - 551.45) *. 5; * /

  }

  addEventListener (Event.ENTER_FRAME, onEnterFrame, false, 0, true);

  function onEnterFrame(ev:Event):void {}

  var requesterb:URLRequest = new URLRequest ("carouselLoader.swf");

  Charger = null;

  loader = new Loader();

  Loader.Name = "carousel1.

  Adds gallery.swf in the scene at the beginning of the film

  loader.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, ioError);

  function ioError(event:IOErrorEvent):void {}

  trace (Event);

  }

  try {}

  Loader.Load (requesterb);

  } catch (SecurityError: error) {}

  trace (Error);

  }

  addChild (loader);

  Loader.x = (stage.stageWidth - 739) *. 5;

  Loader.y = (stage.stageHeight - 500) *. 5;

  stopover gallery.swf duplication and more on enter frame

  removeEventListener (Event.ENTER_FRAME, onEnterFrame);

  }

  PORTFOLIO BUTTON

  Add eventlistner so that gallery.swf can be loaded

  MovieClip (root),.nav.portfolio.addEventListener (MouseEvent.MOUSE_DOWN, down, false, 0, true);

  function Down(event:MouseEvent):void {}

  Re add listener for contact.swf and about.swf

  MovieClip (root).nav.info.addEventListener (MouseEvent.MOUSE_DOWN, Down1, false, 0, true);

  MovieClip (root).nav.about.addEventListener (MouseEvent.MOUSE_DOWN, Down3, false, 0, true);

  discharge of entry gallery.swf frame if users press portfolio in nav button

  var applicant: URLRequest = new URLRequest ("carouselLoader.swf");

  Charger = null;

  loader = new Loader();

  Loader.Name = "carousel."

  loader.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, ioError);

  function ioError(event:IOErrorEvent):void {}

  trace (Event);

  }

  try {}

  Loader.Load (requester);

  } catch (SecurityError: error) {}

  trace (Error);

  }

  addChild (loader);

  Loader.x = (stage.stageWidth - 739) *. 5;

  Loader.y = (stage.stageHeight - 500) *. 5;

  removeChild (getChildByName ("about"));

  removeChild (getChildByName ("carousel1"));

  delete eventlistner and prevents duplication of the gallery.swf

  MovieClip (root).nav.portfolio.removeEventListener (MouseEvent.MOUSE_DOWN, down);

  }

  INFORMATION BUTTON

  Add eventlistner so that info.swf can be loaded

  MovieClip (root).nav.info.addEventListener (MouseEvent.MOUSE_DOWN, Down1, false, 0, true);

  function Down1(event:MouseEvent):void {}

  This adds the EventListener for portfolio so that the end user can re-post if they wish.

  MovieClip (root),.nav.portfolio.addEventListener (MouseEvent.MOUSE_DOWN, down, false, 0, true);

  MovieClip (root).nav.about.addEventListener (MouseEvent.MOUSE_DOWN, Down3, false, 0, true);

  var applicant: URLRequest = new URLRequest ("contactLoader.swf");

  loader2 = null;

  loader2 = new Loader();

  loader2. Name = "contact".

  loader2.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, ioError);

  function ioError(event:IOErrorEvent):void {}

  trace (Event);

  }

  try {}

  loader2. Load (requester);

  } catch (SecurityError: error) {}

  trace (Error);

  }

  addChild (loader2);

  loader2.x = (stage.stageWidth - 658.65) *. 5;

  loader2.y = (stage.stageHeight - 551.45) *. 5;

  delete eventlistner and prevents duplication of the info.swf

  MovieClip (root).nav.info.removeEventListener (MouseEvent.MOUSE_DOWN, Down1);

  }

  ON THE BUTTON

  Add eventlistner so that info.swf can be loaded

  MovieClip (root).nav.about.addEventListener (MouseEvent.MOUSE_DOWN, Down3, false, 0, true);

  function Down3(event:MouseEvent):void {}

  This adds the EventListener for portfolio so that the end user can re-post if they wish.

  MovieClip (root),.nav.portfolio.addEventListener (MouseEvent.MOUSE_DOWN, down, false, 0, true);

  MovieClip (root).nav.info.addEventListener (MouseEvent.MOUSE_DOWN, Down1, false, 0, true);

  var applicant: URLRequest = new URLRequest ("aboutLoader.swf");

  loader3 = null;

  loader3 = new Loader();

  loader3. Name = "a connection"

  loader3.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, ioError);

  function ioError(event:IOErrorEvent):void {}

  trace (Event);

  }

  try {}

  loader3. Load (requester);

  } catch (SecurityError: error) {}

  trace (Error);

  }

  addChild (loader3);

  loader3.x = (stage.stageWidth - 482) *.5 - 260;

  loader3.y = (stage.stageHeight - 492) *.5 - 140;

  removeChild (getChildByName ("carousel"));

  removeChild (getChildByName ("carousel1"));

  delete eventlistner and prevents duplication of the info.swf

  MovieClip (root).nav.about.removeEventListener (MouseEvent.MOUSE_DOWN, Down3);

  }

  Stop();

  You call unload() on objects that you cancelled - where the error.

  You should do something like:

  {if (loader2)}

  loader2. Unload();

  }

  As for the null value passed into the function - null is a default value. In this way, you can call the low past nothing:

  Down()

  Or you can use it as a handler in which case it will be called by the Auditor:

  Down (mouseEventInstnace);

• I tried to buy Let It Be the audiobook version and it will not download. Said that I bought it, but will not download. I made another purchase at the same time and had problem now.

  I just tried to buy the audio book of Let It Be version. ITunes says that I bought, but it will not download. I did purchase just before that Let It Be one and it downloaded without problem.

  Is it is not currently downloaded from iBooks on your iPhone app, then it shows on the purchase tab in the download application?

• kitten set up a new user account and password. Now, I can't change or get rid of it

  How can I know that to fix this if I use this thing? One of its 9 lives is in danger! Also-how can I get rid of any sign in stuff?

  badkitten parent

  Peacelily,

  I'd love to connect to eliminate the account - except - I don't know what password etc, she managed to get his hands on & with TI - I'm dead in the water! After more than 12 hours of frustration in dealing with this - including HP support - I got it. Taken technology to throw the whole system and start again. Good enough for a computer bought Wednesday am & dumped Fri! The kitten is fine - my mood is painfully tense. I would put him in the House of the dog with the exception of this factor formidable "kindness". Guess I'll call the problem solved

  Thank you very much

  bad kitten parent

• computer laptop alienware 18 inches with IRQL less THAN or EQUAL, and MEMORY MANAGEMENT errors

  I have a laptop Windows 10 18-inch alienware.

  I have been having lots of BSOD with error codes 'a' and 'a1 '.

  I usually get blue screen when I keep my laptop at night, updating a game I want to play, even when I keep him inactive I get the blue screen.

  all disks are installed with the exception of protection of data of the ST Microelectronics free fall"

  Please find the link to dropbox where you will find the dmp files and reliability monitor reports as well as a notebook with my laptop spec.

  

  Help, please.

  Yes it proceed to the screen as the before blue but

  I followed the steps in this new article

  

  and my problem seems to be resolved should I wait I'm running the laptop from one day to the next day to see if it will hold up to.

• Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  It is not possible to update the version of Aperture is 3.4.5

  What can I do?

  You can only update if you have a version of the AppStore of Aperture - if your version of Aperture appears in the history of your purchases on the App Store. Update and then reinstalling.   See this tip of the user for more details:

  Update to Aperture 3.6 after the publication of Photos