New RAM should work, but doesn't work!

Similar Questions

• New RAM not working not not on iMac 2010

  Hello

  I have a 21.5 ' mid year 2010 i3 iMac, and, after all this time, it was time to upgrade the RAM.

  I bought 2 x 4 GB Patriot SODIMM PC3 - 10600 1333 MHz 204-pin, by following the instructions in the Web page of Apple memory upgrade (install memory in an iMac - Apple Support).: 4 GB RAM SO-DIMM memory DDR3 SDRAM 1333 MHz. I installed it according to job with factory 2x2gb RAM Samsung sticks. After a reboot, everything worked beautifully for about 6 minutes. The identified computer sticks again and showed me a full 12 GB available. Which was great, since Yosemite + a few browser windows and Spotify only lasts up to 3GB. I have enough to spare. However, it restarted and again and again and again.

  I decided to test only the new RAM and started with the combination of Patriot 8 GB. It froze on reboot and fully started once, but it restarted less than 2 minutes later.

  Result: now I'm back to the original combination of 2x2gb. Always deal with the lack of memory and without understanding what's wrong with the new RAM I bought at Fry's. What about compatibility? Is there an another specification? Of course, I know, there may be a malfunction of hardware, but I would like to address this issue before making another run to the store and risking another model or brand.

  For reference: I've tried it before, but because of the lack of information from the seller, I was conquered by a stick of RAM 1x8GB, which is not supported by my model. So I replaced it with the 2 in question.

  Thanks for any help.

  It is generally recommended to stick with quality RAM to buy from a seller that tests and ensures their RAM to work with Macs - the two most recommended are OWC (macsales.com) and Crucial. They both offer helps you determine which RAM you need and offer the lifetime warranty.

  http://eShop.MacSales.com/shop/memory/iMac/2010/DDR3_21.5_27

  That should be your - sure.

  I'll be back on the RAM for a refund.

• eMachines EL1850 new RAM not working not

  Hello everyone!

  I wanted to upgrade RAM from 2 GB to 4 GB, so I looked at the label placed on the current RAM and tried to find the best match. I bought and tried 1 x 2 GB Kingston and 2 x 2 GB Corsair (more), but unfortunately none of them worked. After installation and turn on the PC, it was a constant noise for a long time and I couldn't do anything. Nothing on the screen. Then I tried one at a time into the two slots with the same result.

  What's wrong? What I am doing wrong?

  Thanks in advance for your time and help!

  The current RAM:

  UNIFOSA 2 GB GDDR3 - 1333 128MX8 1.5V EP, GU512303EP0202

  I tried (all new) RAM:

  Kingston 1 x 2 GB memory DDR3 1333 MHz Non - ECC, CL9, 1.5V, memory unbuffered DIMM (link)

  Corsair 2 x 2 GB memory DDR3 1333 MHz Non - ECC, CL9, 1.5V, memory unbuffered DIMM (link)

  Motherboard: G41T-AD V: 1.0

  BIOS: P01. B3 (the latest version)

  Upgrades successfully achieved to date: replaced Intel Celeron E3400 with Intel Core 2 Duo E8500

  Fortunately, I found someone who was trying to sell the same Unifosa modules, 2 x 2 GB. They work perfectly!

  I want to thank all the people who have tried to help me!

• Portege R700-19 t - new RAM-> start is no longer

  Hello together,

  so I bought two new RAM sticks for my old laptop
  Toshiba Portege R700-19 t

  But since I installed them, the machine does not start in an operating system more.
  The installed Windows 7 64 bit goes to a black screen before the windows at Startup logo (even in safe mode). And after a few seconds, the fans will quickly but nothing seems to happen.

  The next thing I tried was a (12.04) ubuntu live dvd. But it does not either. No error message or anything, just an automatic restart after a few seconds of black screen.

  The next thing was memtest86 + v4.20:
  It crashes immediately sometimes a black screen and sometimes at this http://i.imgur.com/eJqIyDp.jpg .
  I tested my new two sticks together and alone, still the same problem. The old ones that work perfectly and not crash of memtest.

  In the BIOS is the only thing on the memory and then it sees the correct "Total memory size 8192 MB.
  
  Plug portable-mem from toshiba:

  • Standard: 4 (2 + 2) GB
  • Max Speicherausstattung: 8 GB
  • Technology: DDR3 RAM (1,066 MHz)

  link to the Toshiba product description: http://www.toshiba.de/discontinued-p...tege-r700-19t/

  Cannes-old (work) ram:
  2 x Samsung 2 GB 1Rx8 PC3 - 10600S - 09 - 10 - ZZZ M471B5773CHS - CH9

  new RAM sticks:
  2 x G.Skill 4 GB DDR3-1333 (PC3-10600)
  link to the shop where I bought it: https://www.alternate.de/G-Skill/SO-...roduct/1154622

  In my understanding of both new sticks should work well with my laptop, or am I missing something?

  concerning

  For me, the question is clear enough; the laptop does not start because of new RAM modules.

  The new RAM modules are not totally compatible, or the RAM modules are defective.

  I recommend you test an other modules; for example modules manufactured by Kingston.

• Compaq Presario C303NR is not completely put on after the new RAM upgrade

  Hello Paul,

  It's Tammy. I finally took the time this morning to upgrade the ram in my laptop, model C303nr. And I am desperate need help because something has gone terribly wrong.

  The laptop starts up to my office, I get nothing but then move lines, a little like snow tv, but more structured. I took the new memory on a couple of times and tried to re-sitting, but I get the same results. Furthermore, when I tried to put the old memory, exactly the same thing happens. Have I completely broke my laptop?

  Can you or anyone out there please help me. This is my first attempt to do something like that and I feel absolutely sick results.

  Clinging to hope for a fix.

  Tammy

  Hi Paul,.

  I must say once again, you have a way very appreciated to bring the balance to my pc problems.

  During my first attempt to install new ram not worked, I thought that I had inadvertently he damaged everything trying to embed. (It is certainly not a room of heap for the maneuver of the ram, clips and fingers! Besides, while trying to stay grounded.) Then, when I couldn't get the old RAM to work either, I thought I had I damaged the laptop everything somehow. It was a horrible feeling.

  Even after that I finally got the new ram to work, I felt bad to not get it in correctly the first time. I felt as if I should have been able to prevent any inconvenience on my part. However, when I read that you have recently encountered a problem with ram of your son, your post made me appreciate that sometimes things happen if its your first time or umpteenth time to do.

  Thank you for giving me the space to hold myself.

  In addition, I can imagine how the ram of your son was stuck. If that does not damage its ram, then maybe ram is a bit more durable than the shell egg-nitroglycerin, I felt... like manipulating its fragility should not always be a concern.

  I wish you the best,

  Tammy

• HP Pavilion Notebook PC G6 - continually turns on and off after that new ram is inserted repeatedly

  I just installed another 4 GB of ram, making it 8 GB. It works fine the first time, he started with the new ram, but when it goes off with the new ram installed for at least 30 minutes, simply refuses the RAM and just turns on and turns off continuously. I have to get out the new ram and turn on the computer to make it work again. Once he had a start of full without the new ram I can insert the new ram once again, but this problem is.

  Product number: A3D96PA #ABG

  Processor name: Intel Core i5 - 2430 M 2.40 GHz

  BIOS F.66 - 24/01/2013

  My PC is running windows 8.1 Pro

  The details of the new 4 GB of ram are: Crucial 4 GB DDR - 1600 SODIMM

  Hi Adam_M,

  Welcome to HP forum!

  Please ask, I will do my best to help you.

  I understand that you have installed additional up to 8 GB of ram and you have a problem starting.  Here is a link to HP Pavilion G6 Notebook PC Maintenance and Service of Guide SUMMARY.  If you notice in Page 3, under memory your system only supports up to 6 GB of ram. Please let me know if you want more help.

• iFrame for Flash SHOULD work! (but continues to load in a new window)

  Hi, I am currently having my flash navigation bar load in an iframe, but it keeps opening in a new window (or new tab). I read a ton of other people with this problem, but I can't find something that works. They were targeting mostly just bad.
  I have the Flash button:
  
  on (release) {}
  getURL ("music.html", "onetwothree");
  }
  
  and the HTML on the page
  
  < iframe style = "" name = "onetwothree" src = "main.html" scrolling = "" frameborder = "0" marginWidth = "0" marginheight = "0" height = "450" width = "800" hspace = "0" hspace = "0" > < / iframe > "
  
  I export my FP 6, Actionscript 1.0 flash file
  I tried other versions, no luck there.
  
  Any help would be greatly appreciated.
  
  -Travis

  What I've read, it's a matter of local security. AKA, it will not work on your hard disk, unless you:
  Go to the global security settings
  change locations
  Add location
  Folder browser
  Add your folder C:\

  You can choose the folders that you want to use
  together to allow

  It comes from another forum. Try direct (upload to a server) and it should work perfectly without making the above changes.

• TimeCapsule wifi does not work for iphone and ipad, but doesn't work for laptops

  I just got a new 3 TB timecapsule to replace my old 1 TB timecapsule.  Everything seems in place and I transferred all my data to the new.  Our computers two apple laptops gets wifi nine immediately, but our two iphones and an ipad receive no wifi.  They show that they are connected to a new network, but not WiFi.  Can someone tell me what should I do?  Thank you!

  On the iphones and ipad clear on all networks known. Restart the device and make a new configuration of the network.

  If they are later version idevices... test in the same room as the TC. Still have problems reset the TC and give it a new configuration... Use very short names, without spaces and pure alphanumeric characters. Test first without password... It should work fine... Then add a password... Make sure that it is as pure of 8 to 20 alphanumeric characters.

• Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!

  Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!  Gee, who could have possibly guessed that would happen?  I tried all kinds of silly workarounds, I found on the internet, but still it will not register the stack of DVDs and other discs I have.

  If you're like me and upgraded your iMac that came with a cd/dvd drive internal... so he has to come out to give way to the fusion or the SSD drive, do NOT buy the apple superdrive.  It will work with your computer!

  Think I'll get a laptop samsung...

  Ironic, isn't it? Own Apple SuperDrive will not work with Apple computers. Shame you don't check here first that we would have warned you. Return Apple overpriced and buy a nice third-party player for a third of the price. I love the LG units. You can consider a loading plate because they are more reliable, and you can use these pesky disc when you get one.

• The sign '+' opens NEW TAB stopped working. I have to open a new window each time. I tried to uninstall firefox and install again but the problem persists. Someone guide me on this.

  The sign '+' opens NEW TAB stopped working suddenly. I have to open a new window each time. I tried to uninstall firefox and install again but the problem persists. Someone guide me on this.

  Your agent uisr string is "Mozilla/5.0 (Windows;" U; Windows NT 5.1; en-US; (RV:1.9.2.15) gecko/20110303 AskTbMPC2/3.11.0.15286 Firefox/3.6.15 ', the part of AskTbMPC2 shows you have the toolbar installed Ask. Some third-party programs will add the Ask toolbar.

• Password on notes does not work! Put juice in day to ios9.3 and password to notes, but nothing happened. Notes always open as before. I tried to add new notes too. But nothing happened until now

  Password on notes does not work! Put juice in day to ios9.3 and password to notes, but nothing happened. Notes always open as before. I tried to add new notes too. But nothing has happened so far.

  Same question, the lock in action field icon is absent.

• Satellite Pro 6000 - new RAM does not work

  Hi all

  New to this forum sorry if this was asked before, I did a search but could not find anything so here goes.

  I just bought a new RAM for my Satellite Pro 6000. When I install it nothing happens the laptop won't boot. If I put the old stick in no problem. The ram I bought is unb 512 MB PC133 CL3 and old RAM 256 MB PC133s. I think little small to read with these old eyes.

  I was told I might need an update of the BIOS but cannot find one for my laptop under 1.4 for the moment.
  Any help would be thank Lindsey

  I think that the new RAM is not compatible with the motherboard or laptop.

  The manufacturing of the new RAM you said does not for me so I would buy an another RAM, such as Kingston. Kingston makes high quality RAM and many users here buy Kingston RAM to upgrade its RAM.

  By the way: do you use the RAM or only the new? Normally, if you use two memory modules live, you must use it with the same specifications.

  The update of the BIOS, you can find the Toshiba site, but this doesn t affect the compatibility of Aries.

• Help: New pencil will work on screen for touch/scroll, but it does not write, draw or scribble...

  Help: New pencil will work on screen for touch/scroll, but it does not write, draw or scribble...

  While you do not, you use the iPad Pro, correct?

• Why can not download adobe CC? I click on 'buy now' and it takes me to a page that says "Please come back later", but your site status says it should work normally

  Why can not download adobe CC? I click on 'buy now' and it takes me to a page that says "Please come back later", but your site status says it should work normally

  Hello

  Use the following link to download the creative cloud app

  https://creative.Adobe.com/products/creative-cloud

• I just bought 14 items and installed updates. Camera Raw version is now 9.3.0 and should work with my Nikon D7200 but is not

  Hello.I just purchased 14 elements and installed updates, version of Camera Raw is now 9.3.0 and should work with my Nikon D7200 but is not, help is needed!

  Good to know that things started working well for you.