New SanDisk Extreme 120 GB and the slow performance.

Hello

I recently bought Sandisk Extreme (SDSSDX - 120G - G25) but disappointing the peformance is not good as it is.

My motherboard: ASUS P9X79 PRO)

First of all, I connect ssd Sata 6 Gbit/s port to intel and update the firmware to R211. Also I put all the options in the bios for Sata AHCI mode.

Then I format and run a few tests.

Here are some benchmarks and other:

http://img13.imageshack.us/img13/4746/iastor.PNG

http://img89.imageshack.us/img89/8941/msahcieo.PNG

http://img7.imageshack.us/img7/3112/crystaldisc.PNG

http://img22.imageshack.us/img22/8498/propertiessdd.PNG

http://img832.imageshack.us/img832/6313/smartn.PNG

As the screens above, I tested the msahci and iaStorA drivers.

Also changed cable and switch ports.

Please any help, I have no idea what is wrong.

your performance is normal. as ssd use uncompressable data. SSD using sandforce controllers do better with data compressable.

Tags: SanDisk SSD

Similar Questions

  • Satellite A205-S5864 - stop itself and the slow performance

    I'm new to this forum, so help me out anyway you can.

    I noticed that my Toshiba laptop showing odd behavior lately. She recently began to stop himself suddenly without warning. We arrived at the point where it is a regular occurrence. I don't know what it is, if the computer is starting to show it's age, or a hardware problem, etc.. I hope that's not die because this computer begins to happen over two years. The computer knows that he was arrested not because I get the message that this was not decommissioned and how I want to start in.
    I also noticed that, even though I have a core 2 processor, the computer takes awhile to start. I don't know how to improve the performance, because I regularly clean the registry and trash. I have norton 360 along with spyware blaster.

    any input would be appreciated. I will post more details that are necessary.

    Hello

    I m not A205 owner but on my computer Toshiba laptop, I got the same problem it stops and the reason was a higher internal CPU temperature. So I ve looked in the forum and founded an interesting article on the cleaning of a Toshiba laptop. That's why you need compressed air and you can clean without disassembly.
    Check this box!

    Your slow performance it of difficult to say something on this issue, but in most cases it s advisable to reinstall Windows.
    In my opinion the Norton antivirus slows performance a little so I m using the software tool free AntiVir.

    BTW, did you remove Toshiba TEMPRO?

  • Crashing apps and the slow performance since the installation of macOS Sierra

    Hello

    Im a user of long date Mac but displays the first time that I was pretty happy with everything that on my macbook pro for the past years... until I installed Sierra a day ago.

    Since installing everything works super slow and a lot of my apps hang and crash. Things are not rosy, here is my EtreCheck report - running current version 10.12 on my MacBook Pro (mid 2010) if anyone can help would be much appreciated. Thank you

    EtreCheck version: 3.0.6 (315)

    Report generated 2016-10-07 16:52:11

    Download EtreCheck from https://etrecheck.com

    Time 06:53

    Performance: Below average

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Apps are broken

    Hardware Information:

    MacBook Pro Intel Core i5, Intel Core i7 (mid-2010)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro6, 2

    1 2.53 GHz Intel Core i5 CPU: 2 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1067 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1067 MHz

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 371

    Video information:

    Intel HD Graphics

    NVIDIA GeForce GT 330M - VRAM: 256 MB

    Color LCD 1440 x 900

    Software:

    macOS Sierra 10.12 (A 16, 323) - since startup time: less than an hour

    Disc information:

    Hitachi HTS545050B9SA02 disk0: (500,11 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 86,37 (Go 31,68 free)

    Macintosh HD (disk 1) / [Startup]: 412,50 (GB 158,46 free)

    Encrypted AES - XTS unlocked

    Storage of carrots: disk0s2 412.88 GB Online

    MATSHITADVD-R UJ-898)

    USB information:

    Logitech USB receiver

    Card reader Apple

    Apple Inc. Apple keyboard / Trackpad

    Apple Inc. BRCM2070 hub.

    Apple Inc. Bluetooth USB host controller.

    Computer, Inc. Apple IR receiver.

    Built-in ISight from Apple Inc..

    Guardian:

    Mac App Store and identified developers

    Kernel extensions:

    / System/Library/Extensions

    com [no charge]. Huawei.driver.HuaweiDataCardDriver (4.0.6 - 2016-10-04) [Support]

    com [loading]. Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0 - 2016-10-04) [Support]

    com [no charge]. Driver Logitech.Unifying.HID (1.2.0 - SDK 10.0 - 2016-10-04) [Support]

    [no charge] com.leapfrog.driver.LfConnectDriver (1.0.6 - SDK 10.0 - 2016-10-04) [Support]

    NET [no charge]. Thomson.iokit.USBLAN_usbpart (1.6.0 - 2016-10-04) [Support]

    Startup items:

    HWNetMgr: Path: / Library/StartupItems/HWNetMgr

    Startup items is no longer function in OS X Yosemite or later

    Launch system officers:

    [no charge] 7 tasks Apple

    tasks of Apple 178 [loading]

    tasks of Apple 86 [performance]

    Launch system demons:

    [no charge] 42 tasks of Apple

    tasks of Apple 167 [loading]

    tasks of Apple 95 [performance]

    Launch officers:

    [performance] com Logitech.Control Center.Daemon.plist (2011-11-05) [Support]

    [loaded] com.adobe.AAM.Updater - 1.0.plist (2015-09-18) [Support]

    [cannot] com.adobe.CS5ServiceManager.plist (2010-07-14) [Support]

    [loading] com.google.keystone.agent.plist (2016-07-13) [Support]

    [cannot] com.teamviewer.teamviewer.plist (08 / 08/2015) [Support]

    [cannot] com.teamviewer.teamviewer_desktop.plist (08 / 08/2015) [Support]

    Launch demons:

    [loading] com.adobe.SwitchBoard.plist (2010-07-14) [Support]

    com.Adobe.agsservice.plist [running] (2016-08-19) [Support]

    [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

    [loading] com.apple.installer.osmessagetracing.plist (2016-09-14)

    [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

    [loading] com.teamviewer.Helper.plist (2015-03-03) [Support]

    [cannot] com.teamviewer.teamviewer_service.plist (08 / 08/2015) [Support]

    User launch officers:

    [loading] com.adobe.AAM.Updater - 1.0.plist (2010-07-16) [Support]

    [loading] com.adobe.ARM. [...]. plist (2011-09-13) [Support]

    [loading] com.adobe.ARM. [...]. plist (2010-07-14) [Support]

    com.nero.HSMMonitor.plist [running] (2016-10-07) [Support]

    Plug-ins Internet:

    DirectorShockwave: 12.0.6r147 - SDK 10.6 (2013-11-25) [Support]

    OVSHelper: 1.0 (2010-12-10) [Support]

    OfficeLiveBrowserPlugin: 12.3.6 (2013-03-22) [Support]

    NP_2020Player_WEB: 5.0.7.0 (2011-04-03) [Support]

    AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-09-18) [Support]

    FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-29) [Support]

    AdobePDFViewerNPAPI: 11.0.10 - SDK 10.6 (2014-12-03) [Support]

    DivXBrowserPlugin: 2.1 (2010-12-10) [Support]

    QuickTime Plugin: 7.7.3 (2016-09-14)

    Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-29) is unable to contact Adobe

    iPhotoPhotocast: 7.0 (2010-07-14)

    Silverlight: 5.1.30514.0 - SDK 10.6 (2015-01-17) [Support]

    AdobePDFViewer: 11.0.10 - SDK 10.6 (2015-03-29) [Support]

    JavaAppletPlugin: 15.0.1 - 10.12 (2013-10-25) check the version of the SDK

    User Plug-ins internet:

    Picasa: 1.0 (2011-03-29) [Support]

    Safari extensions:

    DivX HiQ - DivX, Inc. - http://www.divx.com/en/software/divx-plus/web-player/ (2010-12-21)

    DivX Plus Web Player HTML5 < video > - DivX, Inc. - http://www.divx.com/en/software/divx-plus/web-player/ (2010-12-21)

    3rd party preference panes:

    DivX (2010-12-10) [Support]

    Flash Player (2016-08-30) [Support]

    Logitech Control Center (2011-11-05) [Support]

    Time Machine:

    Time Machine not configured!

    Top of page process CPU:

    5% kernel_task

    5% WindowServer

    1% com.apple.AmbientDisplayAgent

    1% xpcproxy

    0% fontd

    Top of page process of memory:

    Kernel_task 432 MB

    Mdworker (15) 430 MB

    Airmail beta 283 MB

    152 MB Finder

    Sandboxd 147 MB

    Virtual memory information:

    476 MB free RAM

    3.53 GB used RAM (1.41 GB being cached)

    Used Swap 0 B

    Diagnostic information:

    7 October 2016, 16:39:48 Self test - passed

    7 October 2016, 16:20:48 ~/Library/Logs/DiagnosticReports/Airmail Beta_2016-10-07-162048_ [redacted] .crash

    / Applications/Airmail Beta.app/Contents/MacOS/Airmail Beta

    October 6, 2016, 08:17:31 PM/Library/Logs/DiagnosticReports/App Store_2016-10-06-201731_ [redacted] .hang

    / Applications/App Store Store.app/Contents/MacOS/App

    October 6, 2016, 07:52:21 PM/Library/Logs/DiagnosticReports/station air Beta_2016-10-06-195221_ [redacted] .hang

    October 6, 2016, 14:37:32 /Library/Logs/DiagnosticReports/Preview_2016-10-06-143732_[redacted].hang

    /Applications/preview.app/Contents/MacOS/preview

    October 6, 2016, 02:37:26 PM/Library/Logs/DiagnosticReports/station air Beta_2016-10-06-143726_ [redacted] .hang

    October 6, 2016, 14:37:22 /Library/Logs/DiagnosticReports/firefox_2016-10-06-143722_[redacted].hang

    /Applications/Firefox.app/Contents/MacOS/Firefox

    October 6, 2016, 14:37:18 /Library/Logs/DiagnosticReports/Pages_2016-10-06-143718_[redacted].hang

    /Applications/pages.app/Contents/MacOS/pages

    October 6, 2016, 14:37:12 /Library/Logs/DiagnosticReports/AdobeAcrobat_2016-10-06-143712_[redacted].hang

    / / Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat

    October 6, 2016, 14:36:50 /Library/Logs/DiagnosticReports/Preview_2016-10-06-143650_[redacted].hang

    UNKNOWN PATH

    Try this first: what happens if you start in safe mode (hold down the SHIFT key during startup), the problems go away?

    Try this second in normal startup mode: what happens if you create a new user account and log in as that user, the problems go away?

    I'm not sure I'd worry about the plane crashes - it is listed as beta software

  • just got the new canon 7 d mk2 and the LR5 cannot read the format?

    just got the new canon 7 d mk2 and the LR5 cannot read the format?

    Hi hiffmannsphoto,

    Native support of Lightroom for the D750 has been added in the Lightroom update published 5.7 tonight.

    Version details:

    Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html

    Camera Raw 5.7: vailable.html http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a

    Kind regards

    Pete

  • Satellite T110-11U: WLan connection dropped and very slow performance

    Hi people,

    I use a Satellite T110-11U running windows 7 Home premium.

    After having initially was very satisfied with its use, it now becomes more and more frustrating to use with wifi, with connections dropped and very slow performance.

    I have updated the BIOS and think I have updated all drivers wirelss, but could be the problem. It seems that wireless, software of management is at fault because the networks are detected, but not clinging.

    Any suggestion or tips to try will help save my sanity!

    Thanks for your help.

    John

    > have updated the BIOS and think I have updated all drivers wirelss, but could be the problem.
    If you need to make sure that you use the latest WLan driver.
    The driver can be downloaded here:
    http://APS2.toshiba-tro.de/WLAN/

    The laptop uses the Realtek RTL8191SE of WLan card.
    Please also reset the settings of the Wlan router. I had a lot of problems with my WLan and after the reset of the router, performance problems disappeared.

  • Can I re-download Adobe XI to a new PC under my purchase and the original serial numbers?

    Please help me how to re - download Adobe XI to a new PC with the purchase and the original subscription? I'm still the original user, but have updated my PC.

    Download and Installation Help-

    https://helpx.Adobe.com/download-install.html

    Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  • GPU and the overall performance Cache

    Site Web of NVIDIA says: The Global Performance Cache feature makes After Effects faster and more responsive than ever before taking full advantage of the power of the hardware in your computer. NVIDIA GPU to accelerate previews when you draw pictures on the screen for a highly interactive experience.

    overall performance automatically uses the gpu or you have to activate it? and is that a good reason to invest in a good gpu or not really?

    The peformance global cache has nothing to do with the GPU or Nvidia. See this for more details the features of cache:

    https://www.video2brain.com/en/lessons/global-performance-cache-and-persistent-disk-cache

    After Effects uses the GPU to almost nothing. Details are here:

    http://www.Adobe.LY/AE_CUDA_OpenGL_GPU

  • Password problems and the slowness of IMAP with BTYahoo

    After changing POP IMAP, I experience slow responses (including Thunderbird does not) and repeated messages to change my password. My work around is to remove all the password stored in Thunderbird, close and re - open Thunderbird, enter my existing password and get Thunderbird to save him. Also, I have to enter my password when sending emails. After this Thunderbird works well (but very slow to get new emails) for a few days. Then I get a message that my password is not accepted and to enter a new password - which none are accepted. My impression is that this message occurs when Thunderbird updates draft records, sent or deleted from the server. Encryption with the server synchronization problem?
    When things work, on the opening of Thunderbird the new e-mail list is displayed but cannot be opened for some time. During this wait, Thunderbird does not not msg occurs if I try another action such as moving a slider to see an old email.
    Any suggestions on how to solve my problems?
    Tony Carmona

    TonyCaporn said

    After changing POP IMAP, I experience slow responses (including Thunderbird does not) and repeated messages to change my password. My work around is to remove all the password stored in Thunderbird, close and re - open Thunderbird, enter my existing password and get Thunderbird to save him. Also, I have to enter my password when sending emails. After this Thunderbird works well (but very slow to get new emails) for a few days. Then I get a message that my password is not accepted and to enter a new password - which none are accepted. My impression is that this message occurs when Thunderbird updates draft records, sent or deleted from the server. Encryption with the server synchronization problem?
    When things work, on the opening of Thunderbird the new e-mail list is displayed but cannot be opened for some time. During this wait, Thunderbird does not not msg occurs if I try another action such as moving a slider to see an old email.
    Any suggestions on how to solve my problems?
    Tony Carmona

    It turns out that my problem was due to an interaction of the Thunderbird and McAfee antivirus. That has been fixed to be scanned and attached to an incoming mail causing Thunderbird does not Msg. Power analysis of attachment of the fixed e-mail off my problem
    Tony Carmona

  • How to use windows scan with the new canon printer is connected and the copy and printing, but can't seem to be able to use the technique of scan windows

    How to use windows scan with my new canon MX 922 printer.  It is conncected and copying and printing but can't seem to use the windows scan option, the cannon that which for me is slow thanks

    All in one, type printers (print, copy, scan) usually have a very specific set of instructions during the installation.  If not followed exactly the probability is that the scanner will not work.

    Canon: http://www.usa.canon.com/cusa/consumer

    Download and read the Setup instructions for your model, have you followed the instructions exactly, more precisely when to connect the printer / scanner during installation of the software process?

    J W Stuart: http://www.pagestart.com

  • Get several errors in the hard drive and the slowness of the system XP

    COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ?  Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.

    * original title - mistakes, mistakes, mistakes and Everwear *.

    COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ?  Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.

    Please be specific on what you mean by "far from many errors on the hard drive."  What kind of mistakes? Do you mean the drive read errors? Please quote the error message you get exact, verbatim.

    How many mistakes is "too much"? How many times they do they happen? They occur only when doing certain things or anything?

    If you really get a lot of the drive read errors, the drive is defective and must be replaced.

    But if you're talking about freezing, slow, etc. This is another question entirely, and I wouldn't call it 'errors on the hard drive. The little info you provided the mind, it is difficult to know what this problem is, but one of the things these days plussusceptibles is malware infection. What antivirus do you run (they are far from being just as good, and some of the most popular are among the worst). Do you also run an anti-spyware program? If not, it's * very * likelythat you are infected. I recommend that you download and run the free MalwareBytes AntiMalware to http://www. Malwarebytes.org/products/malwarebytes_free

  • BlackBerry 10 new software has been removed and the phone on Z-10 options

    I can't unlock my phone # now, I'll call option and 'show my number' disappeared! Any ideas? I didn't set a restore point wen I DL new updated or the other

    Fixed my problem by phone re-booting. I have in fact shud start!

  • WAIT times extreme and vm slow performance

    In a cluster of 3 host R710 ESXi 4.1 (3 x 16 logical processors) DRS 18 virtual machines running on a virtual machine performance is really bad.

    Glancing once ready nothing strange does not show, but WAIT times seems extremely high (some vm of maxing out at 20000 millisecond for longer periods).

    I see that most vm have 2 vCPU and about 6 even 4 vCPU. I guess that the problem could be with the vCPU but do not know (its use and ready once are really low). Which could explain the high WAIT times?

    Concerning

    The metric of WAITING % is not relevant because it includes idle time:

    http://www.yellow-bricks.com/2012/07/17/why-is-wait-so-high/

    % OF WAITING
    The total percentage of the Resource Pool/world of time in a wait state.  That is, the world awaits a VMKernel resource.  Note that this percentage includes the percentage of time that the Resource Pool/world remained inactive.

    If you really think a CPU bottleneck, RDY and CSTP % are the main parameters to be monitored.

    Looking at once ready nothing strange shows

    So how big are they really? Do not forget to put ready graphic vCenter summation values in proportion to the data collection interval (20 seconds in the graphs in real time).

    But since I doubt you really CPU issues with 'only' 48 vCPUs in a cluster of 3 guests with 24 son of carrots/48 total, less than most, if your VMS running at nearly 100 percent CPU usage.

  • When adding new record create id data and the static information

    Hi, I have a tabe datbase like this:

    CREATE TABLE 'paper')
    'id_paper' INTEGER (11) NOT NULL AUTO_INCREMENT,
    'sample_url' varchar (50) COLLATE utf8_general_ci NOT NULL DEFAULT ",
    PRIMARY KEY ('id_paper')


    When I add the new record, I need the "sample_url" field to automatically add this information:

    images/15_sample.jpg.

    images - is subfolder where my pictures are stored
    15. is id_paper (primary news NuméroAuto ID)
    _sample.jpg - static and must be added.

    I use adobedeveloper Toolbox to generate code with minor changes, I'm no guru php either.

    I retrieve my data like this:

    SELECT
    Paper.ID_PAPER,
    Paper.sample_url,
    Concat ("< img src = images /', sample_url, ' ' ' width ="66"height ="174"/ >") AS sample
    Of
    paper

    I use this code to add fields:

    Add columns
    $ins_paper-> setTable ("paper");
    $ins_paper-> addColumn ("sample_url", "STRING_TYPE", "POST", "sample_url");
    $ins_paper-> setPrimaryKey ("id_paper", "NUMERIC_TYPE");

    It's php for the text box:

    < b >
    < class td = "KT_th" > < label for = "sample_url" > sample_url: < / label > < table >
    < td > < input type = "text" name = "sample_url" id = "sample_url" value = "<?" PHP echo KT_escapeAttribute ($row_rspaper ['sample_url']); ">" size = "32" / >
    <? PHP echo $tNGs-> displayFieldHint ("sample_url");? > <? PHP echo $tNGs-> displayFieldError ("paper", "sample_url");? > < table >
    < /tr >


    What should I change?

    I think in this line here:
    < td > < input type = "text" name = "sample_url" id = "sample_url" value = "<?" PHP echo KT_escapeAttribute ($row_rspaper ['sample_url']); ">" size = "32" / >
    I need to add php code to get the primary key ID and my static text too, but how?

    Hello

    Well the modified code is irrelevent at this stage. The custom trigger should do the trick. Test on my test server here it worked fine. So, something is missing. I was even going to the point of adding nothing to the sample_url field and he was always fill the db.

    It's my registerTriggers

    $ins_paper-> registerTrigger ('STARTER', "Trigger_Default_Starter", 1, "POST", "KT_Insert1");
    $ins_paper-> registerTrigger ("FRONT", "Trigger_Default_FormValidation", 10, $masterValidation);
    $ins_paper-> registerTrigger ("END", "Trigger_Default_Redirect", 99, "paper.php? done");
    $ins_paper-> registerTrigger ("AFTER", "Trigger_LinkTransactions", 98);
    $ins_paper-> registerTrigger ("ERROR", "Trigger_LinkTransactions", 98);
    $ins_paper-> registerTrigger ("AFTER", "Trigger_Custom", 50);

    Maybe you can post a txt file with the uninstall code?

    I really think at this point it's something small.

  • "Windows 7 Build 7601 this copy of Windows is not genuine" and the slow boot after malware removal

    HP Pavilion dm4 my daughter recently started to take about 10-15 minutes to start, tell me that he had become infected by something questionable. It is currently running Windows 7 Home Premium SP1, with AVG free anti-virus.

    When we noticed the problem first, AVG has been disabled (probably by malware), and I could not turn it back on. He would not run a scan at all. I have scanned it with Norton Power Eraser and their free bootable scanner, nor identified any problems. I ran Malwarebytes in safe mode, and it found several files associated with Yontoo, which he deleted. I ran ccleaner, including the registry cleaner. At this time, AVG was returned to service, so I ran a full scan with it. AVG found several files associated with OpenCandy, which he deleted. A scan later Malwarebytes came clean.

    For now, the system seems to work fine, EXCEPT: there are still a huge amount of time to start - several minutes between each step. And now, the desktop appear intermittently a message which reads: "Windows 7 Build 7601 this copy of Windows is not genuine".

    I found a lot of discussion online about this error message, but it seems that each of them (which I reviewed) has a different twist to what I feel.

    Any suggestions for next steps? Thanks in advance.

    Marty

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0
    Code of Validation caching online: 0x0
    Windows product key: *-* - 73CQT - WMF7J-3Q6C9
    Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
    Windows product ID: 00359-OEM-8992687-00010
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.1.7601.2.00010300.1.0.003
    ID: {321485FF-2C7F-4DDA-9124-0D4D28670BB4} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.140303 - 2144
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 100 authentic
    Microsoft Office Home and Student 2007-100 authentic
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {321485FF-2C7F-4DDA-9124-0D4D28670BB4}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-325666077-4022567897-4061562596Hewlett-PackardHP Pavilion dm4 Notebook PCHewlett-PackardF.0320100402000000.000000 + 000308A3407018400FC04090409Eastern Standard Time(GMT-05:00)03HPQOEMSLIC-MPC10010012dV plus q6DdvhcKikFOSx4zqfTXcqyQ 42F7D29929DA716Microsoft Office home and Student 2007 81602-907-9420346-681571

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 HomePremium edition
    Description: operating system Windows - Windows (r) 7, channel OEM_SLP
    Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00178-926-800010-02-1033-7600.0000-1242010
    Installation ID: 013924405414857934386442430671098625394201997583852710
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: 3Q6C9
    License status: licensed
    Remaining Windows rearm count: 2
    Trust time: 16/09/2014-18:10:14

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: n/a
    Beyond: 0 x 0000000000000000
    Event time stamp: n/a
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:

    --> HWID data
    Current HWID hash: KgAAAAEAAQABAAEAAAABAAAAAQABAAEA6GEEOpAwSrwc9bTnDrV8XFxd

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    HPQOEM APIC-SLIC-MPC
    FACP HP SLIC-MPC
    HPQOEM HPET SLIC-MPC
    START HPQOEM SLIC-MPC
    MCFG HPQOEM SLIC-MPC
    ASF!   HPQOEM SLIC-MPC
    SLIC SLIC-MPC HPQOEM
    SSDT TrmRef PtidDevc
    SSDT TrmRef PtidDevc
    SSDT TrmRef PtidDevc
    SSDT TrmRef PtidDevc
    ASPT HPQOEM SLIC-MPC
    SSDT TrmRef PtidDevc

    Marty

    To recover the files please see paragraph 7.4 in the link here:
    http://www.gerryscomputertips.co.UK/win7tips1.htm

    Alternatively, you can run chkdsk from the other computer hard disk.

    When you have recovered your data files you can restore settings.

    Another option could be to download a copy of windows, to burn a copy on DVD and try a repair installation. The sticker COSTS on the computer applies to OEM Windows Home Premium? -What is the 25-character readable product key?

  • I bought a new hp probook 4540 s, and the fingerprint does not work I installed the new driver but anyway, so help please?

    I've updated all but still, it won't work

    Hi Daniel,.

     

    I suggest you to install the validity fingerprint sensor driver to get the finger print sensor option in Control Panel. Here is the link for our reference.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-109053-1

     

    Then, you need to install the Manager software security tools to protect for the finger print job. Go through the link:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-106118-1

    Then you must install the player 3D HP 5 guard to protect the drive against damage in case the laptop is hit hard or fall from a low height, by parking the heads.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-106091-1

    You can also refer to the thread for your reference.

    http://h30434.www3.HP.com/T5/notebook-hardware-e-g-Windows-8/HP-ProBook-4540s-fingerprint-sensor-not-detected-useless/TD-p/1942347

    If you have other questions related to the issue, then I suggest you to contact HP support. They would help you better.

    http://h30434.www3.HP.com/

    Back to us for any other questions related to Windows.

Maybe you are looking for

  • Reset Toshiba e-store account - 22672

    Unfortunately, I got the paper out of the virtual store. It is a shame.

  • Re: Satellite A500-1DN - disk Blu - Ray Writer

    Hi all! My problem is that, in my laptop, I have a burner TSST CDDVDW TS-L633C.With this i ' t can record or play blu - ray content.Is this opportunity to get a blu - ray disc burner in my toshiba laptop? If Yes, how much does it cost? Thanks in adva

  • the backup Cloud preventing defragmentation can anyone help please?

    Using know-how cloud (wish I had never started it!) Now when I try to defrag computer it stops and tells me:-paused for volume shadow copy? I use XP - can anyone help please?

  • Can not install my new HP All In One printer

    Original title: CANNOT INSTALL a PRINTER ALL-IN-ONE COST of HP 5610 EVRY TIME I TRY TO INSTALL A FRSH HP5610 ALL-IN-ONE PRINTER, I GET THE MESSAGE AFTER NO MISSING DLL FILES, SLBCSP, SCCBASE, GPKCSP ENUM I DOWNLOAD AND TRY TO INSTALL NOT NO CHANCE

  • photo upload tool has deserted in Hotmail

    Active x control prob. without any warning, I can't download one of my photos on my hotmail emails. all I get is on info bar is tapΘ block this work because it can be dangerous I used it for years without a problem, then yesterday 15/08/10 What's goi