New Satellite L50-A-1This starts with black screen

Similar Questions

• Qosmio F50-125 starts with black screen after a BIOS update

  Hello

  After instalation if new bios (v 2.0), computer sometimes starts with black screen.
  Even the first page that show press F2 to enter the bios is not displayed.

  You have someone older version of bios?
  So, I might try if it's the fault of it.

  Hello

  I think that the old BIOS will not help you because the laptop would have known that you try to update the BIOS to the older version, and it would break to the top of the procedure.
  In addition, the older BIOS is not available on the European driver Toshiba page.
  I think just only a Toshiba ASP had an older version of BIOS.

  Anyway, you said that sometimes happens.
  This means that this issue doesn't still persist
  Hmm. in this case, I recommend the default BIOS settings and update the driver display.

  Check it out!

• Vista Home starts with black screen with blinking cursor

  Hi, I have a toshiba satellite with Vista home, he stopped last Sunday, when I turn it on, start it start sbooting normally but then I get a black screen with cursor and is not go further. I tried last good known, tired, safe mode, I have same TOSHIBA recovery disk and does not either, when I boot from the CD, it seems that it is loading files, then the yellow bar on the work screen appears, but then I get the black screen with cursor, nothing after that.

  I took out HD and a Sata drive via the usb port to connect to my HP laptop. I was able to open the F and G, but C drive (where the OS is installed which has changed the letter e) could not open, he told me I need to format it.

  I have the original recovery disk for Toshiba, which works when the hard drive is not in the Toshiba, but when I put the hard drive back, I never the option where it asks me to repair or reinstall all.

  is it possible that I can use my laptop HP after the toshiba drive connected via USB, to repair the toshiba C partition (which is called E)?

  There are more than 2 weeks worth of work that are not backed up, and I wouldn't lose. Help, please.

  Hi MB1969,

  This seems like a hard disk failure. You must get in touch with Toshiba to get help.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

• Windows 8 starts with black screen on startup.

  Original title: BOOT WIN 8 on TOSHIBA SATELLITE

  Hi - I've updated to Win 8 on my Toshiba Satellite laptop.  Now, when I start the laptop, it shows the initial screen of Windows but will not perform the process to the lock screen or splash screen.  The screen is black and goes no further.  I have to press the off button and hopefully get to go in standby mode (i.e. when the power led is flashing).  So, I press the button to wake that then displays the lock screen.

  Someone has ideas on what setting could be the cause.  I have looked in the trunk of the BIOS but can't find anything.  Also can't find anything obvious in settings PC Win

  Thank you

  Richard

  Hi Richard,

  I would be grateful if you could answer the following questions:

  1. You have installed the latest drivers for Windows 8?
  2. What is the model number for Toshiba Satellite laptop?

  If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

  Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

   

  Method 1: To resolve this problem, update the site Web of Toshiba video card driver.

  Check out these Microsoft items for additional reference:

  Download and install the drivers

  http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• MacBook (2010) starts with black screen with flashing Apple logo

  I recently got ahold of a Macbook Pro 2010 running very slow so I did a reinstall of the operating system (which was a living nightmare, Macintosh is not as easy to manage as it was at the time of PowerPC) once I got to the top and running, I decided to upgrade to the latest version of El Capitan (an update (not an upgrade I already had a version out there) once I rebooted and let the computer do its thing he began to start up normally, but after finishing the progress bar, he went to a black screen (with the screen still on) that flashed the boot from time to time Apple logo. I forced shut down the computer and start in safe mode with success (that's how I'm typing this post now).

  Thanks in advance.

  When you reinstalled, did you remove any third-party system before reinstalling.

  A Mac that runs in Mode without failure, but are generally not normally indicates some incompatible system changes.

  Software common problems are things that are intended to clean, protect, optimize, accelerate, or otherwise maintain your Mac.

• Satellite Pro M40 sometimes starts with white screen

  Hello!

  I'm pulling out my hair with this problem.

  For no definable reason that according to me, my laptop will start with a blank screen.
  Not all the time, but, seemlingly, whenever it feels like I need extra help stress on my plate.
  For the most part, with perseverance (starting with or without battery, with or without the adapter, with or without pci with or without mouse usb network card and any combination of these elements), it ends by lights correctly, but sometimes Nothing that I won't get it to start and show me a screen.

  My M40 is 4 months old.
  Since it's purchase sent to Toshiba for repair twice for this problem, when I have exhausted myself trying to coax it into life. Whenever he was sent by saying either the problem has been fixed, or that he had no problem found/all systems ok / "it works very well for us, after testing all week."

  This week [edit: it was Wednesday], I sent it to me, and Yes, I checked the trunk upwards and gave a sigh of relief that there is an image on the screen.
  I wrote a letter to this topic a day or two later (that day he first gave me a screen white, but on closing down and restart, it was fine).
  Today, however, not a week later, I have a white screen again.

  I am reluctant to send for repair again, due to the stress involved and the time it takes and the technicians speaking it works for them.

  If anyone can help, or was faced with a similar problem, please respond.

  Oh, and the solution does not lie with the keys FN + F5, because I tried several times... unless there is a way to 'special' to build on them, I'm not in the running for!

  [Edit]: several hours later, as a demonstration of her bored this problem is, my screen is once more working.

  I went on once again, at the time and no joy. Then, after switching OFF, count to ten and the restart, eureka.

  I'll update with news as it happens. If there are all the necessary specific details about "switching on the environment", just let me know.

  Post edited by: jazziefox

  Hello

  Thank you for your update.
  It's a very strange question, and it would be very helpful if you can put yourself more observational.

• TouchSmart HP Envy 14 - laptop occasionally starts with black screen

  Hello and thank you for taking the time to look at my problem. My laptop is a HP Envy Touchsmart 14 8.1 Windows running. The product name is HP ENVY 14 Sleekbook TS and the number is E0M45UA # ABL

  My problem is that my computer occasionally starts with a blackscreen with my mouse in the Center. I can move the mouse but it will return to the Center after a few seconds. I can't seem to do anything but hold the power button and shut down my computer. After that I open it again, can I use my normal computer. I recently did an update of the BIOS of my computer and I don't know if that is causing the problem. How can I solve this problem?

  Hi Shibein:

  Thank you for your inquiry.  You can run the HP Support Assistant click here to help solve the problems and search for updates.  You can also run the ' HP PC Hardware Diagnostics UEFI" click here." "I am also sending documentation on " Touchpad, keyboard, or a mouse ",click here, and ' computer will start (Windows 8)"click here. If none of this has solved the problem, you can try to restore the bios updated"Bios restore" TouchSmart HP ENVY 14-k110nr Ultrabook support" click here, or restore your computer to a date when it was working fine. '" Here is a link to 'use the Recovery Manager to restore the software and drivers (Windows 8)'click here. If you need help can you give us the exact model on HP Envy Touchsmart 14 you have.   "How can I find my model number or product number?" click here.

• Satellite C600-258 starts with black screen only

  Hello

  This laptop was working fine this morning but returned to use it at the moment, the screen has no display.

  When the laptop is turned on, fan can be heard, 2 green lights are on but nothing appears on the screen.

  Suggestions, please?

  Thank you

  Two green lights?
  Your laptop is connected to the power supply current?

  Try to remove the battery, leave for a while and test it with power current only.
  Is there activity HDD (HDD flashing led)?

• Satellite C855-21V starts with black screen only

  Hello.

  This laptop was working fine tonight but having returned to use in the morning, the screen has no display.

  When the laptop is turned on, the fan can be heard, 2. white light is on but nothing appears on the screen. Suggestions, please?

  Thank you

  Post edited by: Irusjalana

  You don t see anything on the screen? Puhh it looks serious hardware problem
  You can connect the laptop to external monitor to test it with 2nd monitor?
  What to do if possible
  If nothing is visible on 2nd screen, this means that your laptop s mother/graphics card chip seems to be affected

  However, it seems that the problem of hardware and in this case, the Toshiba service partner could solve this.

• Windows did not accept the new updates and now still load with black screen and mouse rather than launch windows LOGIN

  
  

  Ideas: Troubleshooting/System Restore/Driver Updates

  • Troubleshooting took an installation point so-called drivers but never completed
  • System Restore worked initially but has now got to a point where he restores to where it will be updated and currently not load new windows
  • Recently replaced the hard drive in this laptop with a new copy of windows 7. Corresponding model
  • The only thing I have not tried is reinstalled, but then even if I did that would stop this from happening?

  ,

   
   
   
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 1.
  Let us run repair system at this stage, it might solve the problem.
  See the following articles for additional help and steps on startup repair.
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
   
  Method 3.
  Step A.
  If the bows persists please verify if you are able to boot safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  Step B.

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
  Method 3.
  I recommend you to restore system using a Windows 7 DVD.

  Here's how:
  To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
  To use this method, you need to restart (boot) your computer using the disk.
  a. Insert the disc.
  b. restart your computer using the power button on the computer.
  c. If prompted, press any key to start Windows from the installation disc.
  o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
  d. choose your language settings, and then click Next.
  e. If you are using the Windows installation disc, click on repair your computer.
  f. Select the Windows installation you want to repair, and then click Next.
  g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
  
   
  If we are able to boot to the desktop now, I would ask you install the updates one by one andcheck the update is at the origin of the conflict.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista starts with black screen

  I have windows vista, my computer turns black when starting, then after about 10 min works fine, how can I solve this problem?

  Hi Cruzo,

  1. When did you start to question?

  2 did you recent hardware or changes to the software of the system?

  Method 1:

  Step 1:

  You can check the following items and check if the problem occurs in safe mode with network.

  Start your computer in safe mode

  Startup options (including safe mode)

  Step 2:

  If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  You can also visit the computer manufacturer and install the latest version of the drivers for the graphics card and other devices and check to see if it helps.

  Update drivers: recommended links

  Check Event Viewer for detailed information on the problem.

  Open event viewer
  What are the information contained in the logs of the event (Event Viewer)?

  Hope this information is useful.

• New tab opens as vi-virw with black ball above in the new version of FireFox. It is very unusual (viruse?). Help, please!

  During the installation of FireFox, installation was interrupted by another program (?) and a quick start module has been added by lightningnew tab.co (?). Some files has been installed in the application Data Mozilla Application.
  FireFox works fine. However, the new tab opens as vi-virw with black ball above it instead frequently used Web sites. Help, please!

  NOTE: This problem occurred on my ThinkPad another with XP operating system.

  OK, now, which resembles Firefox 33.

  See this - http://malwaretips.com/blogs/remove-myhome-vi-view-com-virus/ - for the removal of vi - view instructions.

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• 6 s iPhone restarts with black screen randomly. However, the system always restores the same question.

  I have an Iphone 6 s 128GB. The iphone automatically restarts with black screen and there is no particular application I use when it crashes.

  I did a system restore twice but still the same issue. Could someone please help?

  If the restore does not solve the problem, it is high time to take your device at the Apple Store for more diagnoostics. This may be material / display problem. Good luck.

• I installed the software after installation my computer restarts automatically at the start with on screen start

  I installed the software after installation my computer restarts automatically at the start with on screen start

  Hello

  ·         Do you have what software installed?

  ·         You get the error message?

  Step 1: Try the following steps to disable the automatic restart in case of system error:

  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  (b) select turn off automatic system failure reboot when the Windows Advanced Options menu appears, and press ENTER.

  (c) Please provide the error if you get one.

  Step 2: Check if you are able to start the computer in safe mode.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.