New to CS4 - cannot preview or make Xvid .avi files? Help, please!

Yo!  I'm sure that these problems have a simple cause and solution, but it's been over a decade that I used latest creation, and now I'm completely lost.  Any help would be greatly appreciated!

I'm working with images timelapse compiled into VirtualDub and compressed using the latest build of Xvid.  When I import these .avi files and try to rub in the source window, first works without problem, but the video does not play.  When I move the clips to the timeline, the nasty red line indicates that they are to be rendered.  However, after, they display the same behavior in the output pane.  Cursors move, but the clips are stuck on the first picture!

By the way, is it typical for first having to restore a .jpeg file in order to work with it?  This is the case with me.

If anyone can help me with this, it will save me a lot of disappointment.  Thanks for the research!

PS - Oh and my basic system profile:

Windows 7 RC

E8200 Core2Duo, 2.66 Ghz

4gig Ram

9600 GT GFX card

I wonder why you don't have DV - AVI Type II as a choice. Is this a limitation of VirtualDub?

If you want quality, then no compressed will be the best of your choice here, but with the giant files. Look at adding to your system, but perhaps Lagarith as MS DV, VirtualDub CODEC will not see?

Second choice would be MS Video 1, but you may experience OOS issues.

Good luck

Hunt

Tags: Premiere

Similar Questions

  • My Center of security windows, protection against malware, it seems that my Virus information cannot detect my current antivirus Avira? Help, please

    My Center of security windows, protection against malware, it seems that my Virus information cannot detect my current antivirus Avira? Help, please

    Hello

    It is undoubtedly Avira issue so check with their support and ask in their forums. This does not mean
    that Avira is not protecing the system, but you should check to make sure that Avira is running and active.

    Avira - Support
    http://www.Avira.com/en/support

    Avira - Forums
    http://Forum.Avira.com/WBB/index.php

    --------------------------------------------------------------------------------------------------

    Check the default services and dependencies to ensure that they are running.
    http://www.blackviper.com/WinVista/services/Security_Center.htm

    Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

    How to fix Vista Reporting incorrect information Security Center
    http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

    How to disable or enable the Security Center in Vista
    http://www.Vistax64.com/tutorials/67737-Security-Center.html

    This thread might help as it might be a permissions problem.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-security/3d2049ae-4581-439b-8E15-3f603f5c60f0

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Pre for Mac can work with xVid .avi files?

    Well, I have some of the xVid .avi files and wonder what I should do to get the first Elements 9 for Mac that allows to work with them. I can't seem to find the right codec and I don't know if that would solve my problem even. Yes, the codec would read QuickTime files, but El first would be able to work with them?

    I also thought I could use the Super video converter (free app) on my PC to convert these files to something other than Premiere Elements will love. I guess that .mov would be preferable. I don't really know if this might degrade the video, but I suspect it would be.

    What do you think guys what is the best approach?

    Thank you very much!

    A DVD uses MPEG2 format, transcoded VOB to DVD - take a look at a DVD 'Hollywood' sometimes to see the structure of directories and files

    XviD/divx are variants of the MPEG4 codec... and cannot be directly used to create a DVD... they must be transcoded

    Because thay are not intended to be edited (they were designed for delivery, often via streaming video on the ' net) you will need to convert for use in PrEl

  • Windows Media Player 11 cannot play a type of avi file. Lack of codec?

    I received a file video avi.  Media Player 11 cannot play even if avi is an accepted file type.  The message said something about not having a codec, how can I get the codec for Media Player 11 will play the video.

    There are many types of. AVI files... If yours goes
    for an XviD file... you probably have the XviD codec.

    This can be checked by using the free software GSpot:

    Download GSpot
    http://www.free-codecs.com/download/GSpot.htm
    (left-click the text: "Download GSpot")
    (on the next screen...
    left click: 'Download [GSpot 2.70]')

    You don't have to install it... just unzip the file and
    GSpot.exe left click to launch.

    GSpot Codec identifier
    http://www.headbands.com/GSpot/download.html

    GSpot Super quick start
    http://www.headbands.com/GSpot/v26x/Quick_Start.html

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    XviD Codec
    http://www.xvidmovies.com/codec/

    XviD FAQ
    http://www.xvidmovies.com/FAQ/

  • Turns off spool under System App itself. Cannot print. Using Windows XP. Help, please.

    Spool under app system turns off.  Printers are gone from equipment.  Cannot print.   Is there a way this can be fixed remotely?  Help, please.

    Thanks,-Jane

    Hello

    1. If it works well before?

    2. don't you make changes to the computer until the problem occurred?

    3. could you give us the exact error message?

    I suggest you to try the steps below and check if it helps.

    You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close":http://support.microsoft.com/kb/810894

    Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows
    http://support.Microsoft.com/kb/322756

    For your reference: If the problem persists, please try the steps from the link below.

    Printer in Windows problems:http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

    Resources for the resolution of the printer in Windows XP problems: http://support.microsoft.com/kb/308028

    Hope this information is useful.

  • When you try to launch Lightroom 5cc message Lightroom cannot create a catalogue to local disk. cannot save changes to this place. any help please

    When I try to open Lightroom 5cc on my pc I get the message "Lightroom cannot create a catalog name of the catalog Lightroom 5 volume disk Local C because Lightroom can't save the changes to this place" I just upgraded to Windows 10 and worked fine on windows 7. Any help please?

    Hi bill.hughes3,

    Can you make sure that the images on your local disk folder has full read and write permissions and then try to create the catalog?

  • Cannot delete emails from Outlook Express. Help, please!

    OK, stuck in my Outlook Express again. Someone sent me 2 emails that I can't remove. Help, please! I'll save the news this time, since it seems to happen more. Why? Beyond me!

    Don't worry about what Vijay suggests until you move all messages from the Inbox you want to keep.  His suggestion will scan all messages in your Inbox.

    If you are unable to delete e-mails, your deleted items folder go corrupt.  Move anything out of this folder that you want to keep, then close OE and delete the deleted items.dbx file.  OE will create a new.

    Steve

  • New connection WIFI in Windows 8 is INCREDIBLY unstable. Help, please!

    My machine is a Samsung NP550P7C. I have 4-5 bars of signal when connecting to my wireless router. There are 3-4 laptops in the House who regularly use the same router without ever having an unstable connection, which gives a solid and undeniable performance. However, mine is 'nervous' at best, often late, sometimes completely cut, causing I have to reset the network adapter to retrieve my connection. Essentially, it is unusable.

    I tried various things thanks to scouring the internet:

    -Adjust the settings of the adapter wireless on all the power of the Plans that I use on 'Maximum Performance '.

    -All my network card drivers are up to date.

    -J' tried to disable the network card and allows him once again.

    Nothing works. It of very frustrating and is clearly a problem with Windows 8, because my laptop is brand new and all the drivers etc are up to date.

    I have not tried to uninstall and reinstall Windows, as I literally just received the computer the other day! I have tried unistalling and then re - install the wireless adapter, as it seems very risky to me

    Help, please!

    Hi James,

    I appreciate your efforts to solve the problem.

    This problem may occur if the network card is damaged or due to corrupted network drivers.

    Method 1:
    I suggest you to check if the problem occurs when you use a wired network connection or not.

    Method 2:
    I suggest you to see the steps in the article.

    Wireless and wired network problems:
    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Please HELP!, when I start the installer for Adobe AE CS4, pops up a message that says: cannot install. Done, click Exit. Help, please! My OS is 32-bit. (Windows Ultimate)

    HELP me please!, Adobe AE CS4 gives me this error: cannot install. Done, click Exit.

    Check the configuration required on your system to see if your system is not enough.

    After Effects - http://helpx.adobe.com/after-effects/system-requirements.html

  • Cannot connect to my Admin account! Help, please!

    Today, I made an account on my laptop. I don't know much about computers, and unfortunately, I am not a Curmudgeon. I have Vista, and now I can't log my original administrator account. I get the "the user profile Service service has no connection, failed to load the user profile" and my laptop came with a Vista so I don't have a CD for Vista or anything right now I use my guest, account and I am PANICKING!

    Someone please help ASAP! and please make it simple enough for me to understand. :)

    Thank you very MUCH SO!

    ·                         Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • laptop put in wrong code to "reg" when had key number how to change a battery bought windows pro disk and updated but now cannot find where the same register that help please

    2 years ago, I bought a dell to Wal - Mart 6 months to a year later started having problems I was sent to a disk hard was not then a cd rom drive was not so ok dell restore discs but started again said I had to buy the record of service for 139 + or wipe because I was not registered. Well, I thought that I was put a few oem in place number victory reg key code that I now know that, battery, think you said dell ordered all this in a year without now im stuck so decided to modernize a victory pro from amazon.com but again I can not save one of them and I continue to have started off any HELP im new on computers and cell phones and im frustrated will be totally leave for months and then try to new any help appriciated thanks

    Use the key in your battery compartment (as long as it matches the version of Windows you purchased at Amazon) and activate by phone.

    You can not use the key (if it is a key 'Upgrade') as he was expecting to find a previous version of Windows installed and activated.

    Need an installation DVD that corresponds to your Dell key, read on.

    Download Windows 7 proper. ISO file that includes Service Pack 1
    (Note: must match for your product key version)

    Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
    Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

    Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
    Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

    Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
    Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

    How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
    http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

    After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.

    Create a Windows 7 Bootable DVD using the. ISO file
    Engraving of a file of Windows 7 ISO on a DVD
    http://support.Microsoft.com/default.aspx/KB/977640

    ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
    It supports a wide range of image file formats, and it's free.
    (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
    http://www.ImgBurn.com/

    Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
    Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
    (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

    Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

    ====================== Keyless Install ================================

    How to make a 'Keyless Install"of Windows:

    Boot from the Windows 7 DVD disc, you create and launch the installation.

    After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
    Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

    You now have a 30-day grace period to activate Windows.

    During this 30-day grace period you can try to solve your problems.
    After you are satisfied with all the problems have been resovled then activate Windows.

    ====================== Device Drivers =================================

    Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

    If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

    List of computer manufacturer support sites:
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
    Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

    Graphics/video drivers:
    Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    = How to activate Windows 7 by Internet =.

    1) click Start and in the search for box type: activate
    2) click on the 'Activate Windows' option at the top of the list
    3) click on "now, activate Windows online.
    (4) enter your 25-character product key (not case sensitive)
    5) click "Next" and wait for the key must be verified.

    Another method - to reach a real person:
    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone * do not select/press any option * and wait for a person to help you.
    (6) explain your problem clearly to the support person.
    (7) the person must give you a confirmation ID, copy it down on paper,
    (8) check that the ID is correct in reading the support person.
    (9) to enter the ID number, then click 'Next' to complete the activation process.

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    Activation and registration of a Microsoft product
    http://support.Microsoft.com/?kbid=326851
    Windows activation: (888) 571-2048

    J W Stuart: http://www.pagestart.com

  • «Windows cannot find setup.bath...» "Help, please!

    When windows starts, there is an error message «windows cannot find setup.bath...» "and when I click ok my pc restart. What should I do? (Sorry for the bad English)

    To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option "Repair your computer", select this option and press 'Enter' on your keyboard.

  • Fill in the text of the dropdown menu, can make it work. Help, please!

    Hello

    I am filling a text field with the selection of a drop-down list box in Acrobat Pro.

    The question has been asked and answered here:

    http://forums.Adobe.com/message/4679332

    Unfortunately, I can't get the method described in the work. I create a simple drop-down list named "dropdown1" with some articles and set the values of the export.

    I have create a new textfield called "text1". Open text field properties and go to the tab calculate > simplify the notation of field and enter the name of the dropdown list "dropdown1."

    Then I close form editing and make selections in the drop-down list, but the field remains empty. What I am doing wrong?

    Thank you for taking the time to help.

    The script provided solution a "JavaScript custom calculation" is not a "simplified field notation.

    The comment at the top of the code:

    Custom calculate script for text field

    should help to identify the location for the code.

    The simplified field notation has a number of specific restrictions. One is that the data provided must be only digital data.

  • Missing CONTROLLER of BUS SM driver. Cannot update the driver... Help, please...!

    Product: HP 2000 2116 you

    OS: windows 7 (home edition) 32-bit

    SM bus controller driver missing... Yellow exclamation mark in Device Manager...

    Cannot update device manager by connecting to the internet.

    Hello

    Download and reinstall the Chipset driver at the following link.

    Chipset Driver - Windows 7.

    After the installation is complete, restart the laptop.

    When windows has reloaded, check in Device Manager - if you still have the error message, download and install the following.

    Intel Management Engine Interface.

    Kind regards

    DP - K

  • I need to reinstall Courier New in XP. It has been accidentally deleted. Help, please!

    I need to reinstall Courier New in XP.

    This article explains how to install fonts.  You will need to download or copy the fonts you want to install.
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Firefox crashes when I open a new tab

    Summer crashing a lot lately when I opened a new tab BP-aff83936-ed36-4192-bf86-f850c2140525BP-398ddb6d-e824-40DF-8347-889cc2140525BP-55ab8948-e3fa-4176-A273-bdef32140524BP-e13fba16-3920-4e6d-8744-797a02140523BP-ebb77e0b-ef02-4E88-8a4a-438552140523

  • Disk replacement HARD & BIOS question - Satellite A60

    Hi guys I have a Satellite A60-672 and his original 40 GB drive is dead. I got a Seagate 80 GB HDD as a replacement, but after it is inserted, it does not show in the BIOS. I did some searching on Google but not really came up with a large part. Is i

  • How to print on CLC 1130 via Canon ColorPass Z800

    Hello MacBook Pro (retina, 13 inches, early 2015) the PPD: generic PostScript printer prints. but generates lines and large borders. I have a MacBook Pro 2, 4 GHz with 10.10.5 When I select the printer He shows me the PPD: ColorPASS - Z800 Color Serv

  • DV7 display failure

    My computer locked when the battery is low.  It put off, rebooted and got a black screen.  I could tell the computer started, but could not do anything to display on the screen.  I tried the fix static - take out the battery, press power button, etc.

  • Every time I have to connect to Windows 7, says bad trial user or password but the next attempt to work

    New Windows 7 install. Set up the login admin PW. Whenever I have connection, the first test says wrong user or PW. The next test (no change (caps lock, etc.) this works.) Weird! Any ideas?* original title - transient Windows 7 lockout *.