New to Mac - need help with iphoto

Just bought a Mac in may, which has the OS X El Capitan. Try to use all the advantages of iPhoto (hope I have that correct name). I want to be able to organize and edit photos for most. Came from PC world and I'm certainly still appearing on my Mac. I've had an iPhone for years, so I understand a little of him, but still confused. Here are my questions:

1. how to organize my photos in specific folders? I can see where they have been imported, but don't know how to get them into folders to organize based on the categories of events, customers, etc..

2. If I want to be able to save them in iCloud, how can I check my settings to make sure that I have do this correctly? I would like to be able to access it on all my devices if possible (iPhone, Mac, iPad)

3. If I remove them in one place, this means that they are deleted in the world? (May be a stupid question, but then again, I'm still learning.)

Any help is appreciated. Thank you very much

EGerdes

As I showed you before, www.icloud said it's nothing for me to remove it. A person who is not honest. In addition, there is the fact that my address book has been consumed.

El Capitan comes with pictures for Mac application. iPhoto was provided with older Macs.

1. how to organize my photos in specific folders? I can see where they have been imported, but don't know how to get them into folders to organize based on the categories of events, customers, etc..

Photos for Mac everything automatically organizes in Moments, the Collections, the years.

  • Times are including pictures taken at the same time in the same place.
  • Collections are grouping related moments
  • And the years view shows all photos taken in the same year.

You can add the selection of photo albums and creating an album from them.

And you can group pricing albums by moving them to the folder. Folders can be nested.

See this help page: Help the Photos

i.e. https://help.apple.com/photos/mac/1.0/?lang=en#/phtf677b8f5

Tags: iLife

Similar Questions

  • New GoPro camera need help with rate of 240 fps for idle

    I'm enjoying the possibilities offered by the new extreme sport GoPro camera and need help when it comes to using different rates in Premiere Pro. The pictures I brought in was shot at 240 fps and are indicated as such in the project Panel. However, when I preview the item in the Source Panel he rereads at normal speed and he has not slowed down. If it was shot at 240 fps so I think that Premiere Pro would play this back to 29.97 FPS and true would be slowed down.

    I am a beginner and you have to learn how to treat slow clips that I bring that are supposed to be slowed down.

    TIA,

    Ken

    Rod,

    You are not wrong, exactly, but I must respond to some of your statements. Premiere Pro is not what some think to do this. Craig and I had this conversation recently. When it Premiere Pro sees 240 fps on a sequence of 24 frames per second, it gives executives. About 90% of them.

    Keep in mind that some people turn it quickly because the action is fast, and they want that expected as fast they can project.

    Let's say you have a movie projector that shows 24 fps. No matter what film reel you load into this projector, you see the film at 24 frames per second.

    Premiere Pro will change the 240 IPS or 60 frames per second to 24 frames per second by dropping frames. It is not generally what people want if they have bothered to get away with it. Yes, it shows you 24 fps, but by dropping frames, is not playing frames one at a time.

    This means that if you shoot at 48 frames per second, you get slowed down when projected at 24 frames per second.

    Only if interpret you it or use an effect to slow it down. The effect is not as accurate as the interpreter.

    Think of it THAT WAY and find out what you have to do to make your premiere pro version are TREATING your images like it is projected at 24 frames per second.  In other words, no boxes are deleted. No boxes are added. NOTHING moves the way you SHOT IT.  Each image you shot will be used exactly as you he turned.

    Once again, that if interpret you it this way.

    This is NOT MATH or EFFECTS etc.

    Well, if interpret you it this is not mathematics, but if you slow down using a percentage, then it is math, and I do not think that it slows down the effect of which is the right way to do it.

    Don't download misled by all unwanted people enter with making it slower or faster time with interpolation.

    If you can not Surdemarrage or shoot at a higher rate, interpolation is all you have. But Ken did not have this problem, thank God.

    If you don't know exactly which continues with the sequences interpret things adobe has some help specify exactly files.

    There's not much to it. If you want to slow down 50% interpret it at 120 frames per second. If you want to slow down 90%, interpret it to 24 fps. Anything in between is up to you.

  • New to VMWare, need help with my setup

    Hi everyone, I'm trying to run a specific installation to a laboratory at the House and I'm stuck. at this point I don't know if this is even possible. I have a virtual running Windows server 2012 and a Win7 machine empty. What I need to do, is be able to pxe boot the empty machine since the 2012 server which is running WDS. The service is running, and check all options out_ it is configured as a domain controller and operating dhcp options 60 and 67 correctly configured. Any network settings I try the vm vacuum does not pick up the file of pxe boot from the server... is this even possible or should I try a different product at this point?

    It will probably prove to something simple because I'm new on this but no amount of Googling has done for me so far. Thanks in advance for any help and suggestions!

    Hello

    Welcome to community work station!

    Practices of related laboratory PXE is supported by VMware Workstation. Here is an example for windows: VMWORSTATION 12 PRO, need driver of storage for MDT

    Some tips for the network configuration of your lab environment:

    1. use an independent VMnet for PXE service, DO NOT use bridged VMnet. And you would NOT use better VMnet NAT (aka VMnet8)

    How to:

    a. click on the menu "Edit"-> "Virtual Network Editor... workstation "to open the virtual network Editor.

    b. click on the "Edit settings" button, accept the UAC warning as appropriate.

    c. click on the button "add a network...". ».

    d. Select a new VMnet (I'll use VMnet2 for example), click on the OK"" button.

    e. click 'Apply' then 'OK' in the virtual network Editor dialog box.

    f. open the settings of your virtual machine VM

    g. Select the tab "Hardware"-> "Network card", this "connect to power on" is checked

    h. Select "Custom" and the VMnet you added

    i. click "OK" in the dialog box settings of VM

    j. Repeat step f through i for all your virtual machines

    2 disable DHCP this VMnet of Virtual Network Editor(Technical speaking, it's not necessary, just in case)

    How to:

    a. click on the menu "Edit"-> "Virtual Network Editor... workstation "to open the virtual network Editor.

    b. click on the "Edit settings" button, accept the UAC warning as appropriate.

    c. Select the VMnet you use for the PXE service

    d. uncheck 'Use local DHCP service to distribute IP addresses to virtual machines' option

    e. click 'Apply' then 'OK' in the virtual network Editor dialog box.

    It will be useful.

    Kind regards

    Shawn

  • New on Adobe need help with an if then statement

    Hi, I really like what ADOBE Pro 9 can do with forms and neat and everything is included.

    I'm having a problem trying to understand an if then statement for one of my forms and how to make it executable.

    Here is what I have

    I.          Cigna Medical                                           

                (10)       single                                     $  44.00

                (11)       Employee & Child (ren)              $  82.00          

                (12)       Employee & Spouse                 $  99.00                      

                (13)       Family                                     $125.00                      

                (14)       Decline Coverage                         $0.00          Choice: _        Amount: $_

    An employee will be choice an optiopn 10-14 and but that number of choices. After I am about to fill with this number.

    For instnace, if an employee takes option 11, choice: 11 and amount: $ 44.00

    I put the options in a menu drop-down. The drop down menu is titled CignaMedical and Amount_1 title for amount: $_ and I made a text box.  I put this code: if (this.getField("CignaMedical").value == '10') {}
    Amount_1 = 44.00} tab calculation of properties for the Amount_1 of text box on the custom calculation script tab.

    Any help is greatly appreciate

    Yes, you can use an if-else if construction. Something like that (I got the first part because we reuse it):

    CignaMedical = this.getField("CignaMedical").value;

    If (CignaMedical == '10') {}

    44.00 = Event.Value;

    } Else if (CignaMedical == "11") {}

    Event.Value = 82.00;

    } Else if (CignaMedical == '12') {}

    99.00 = Event.Value;

    }

    etc.

  • New on illustrator need help with gum

    I'm used to using gimp or photoshop, but recently received the new Illustrator. I am doing a logo 30 to 0 in a loop on the bottom of the 3. I can't seem to find a way to do it, I can't understand how the eraser do not work either. Whenever I have let go of the mouse color appears upwards... Any help?

    You mean like this?

    The easiest way is to position your characters as you wish, then use Pathfinder divide.

    Then you coulour parts that you want.

    See you in this example, the value 0 is divided into three sections. You can use Pathfinder unite on them if you wish.

    It goes same for the little background of the 3.

    I never use the gum even if I've been using Illie since it was invented. He always finds a useless tool.

  • New to Ae, need help with time remapping (tutorial anywhere?)

    I am very very big thing back to Ae (CS4) and I was with Premiere Pro CS4 to edit a video, but I need to speed up, but as many of you may know, when you use time remapping in Pr, the sound isn't sync.  However when you do it in Ae, it does.  Then...

    What I'm trying to do is to let the clip I am going for a bit of editing time, then gradually increase the speed to 250% of the original over six seconds, stay 250% for some time, and then gradually in the course of about six seconds to 100% of the original speed.

    I'm kind of having trouble finding how to use Ae well.  There are a lot of easy to understand tutorials out there for Pr, but I can't really find any good for Ae.

    You use the time remapping effect. In fact, when you enable TR, you will notice that the duration of the layer is not limited to the original boundaries more. You can extend beyond the layer's original point.

    So, what you want to do is to keep the TR keyframe at the point layer zero to a value of zero. Set a keyframe second point 06:00 of the layer, with a value of about 14:00 (if possible, because maybe the original clip has no more of any material). You did it like that because if you show 14 seconds of video in a six-second segment, the playback speed is about 250 percent speed. You can do better than 'roughly', but this would require using the speed graph...

    For the real variable speed to set the first keyframe (that at 0:00) to perform a "easy ease on", so the speed ramps up gradually (what means "mitigation" for any property). Setting speed to 100% can be reached at justwith degree sense, but to familiarize themselves with the speed graph will make much more accurate. I say common sense, because if you have a keyframe of a code value of time from 14:00 to 06:00, then a possible way to get back to 100% is to show four seconds of material in the four seconds left (in condition, once again, that your source material has something to 18:00). As you can see, TR needs abundant "handles" (IE, additional documents in the source layer) to work at its 'best.

  • New to AS3 needing help with the key

    OK Im a newb full when it comes to AS3.  Here's what I'm trying to accomplish, I try to make my link button to another page of mine and it loads into the central computer of the original source page.  I found some code to bind the button to a Web site or else my page, but it just opened another window and as previously indicated, I want it to load into the central computer, the button is in the left frame.  Any help would be great, here is the code I use to bind.

    aboutbtn.addEventListener (MouseEvent.MOUSE_DOWN, mouseDownHandler);
    function mouseDownHandler(event:MouseEvent):void {}
    navigateToURL (new URLRequest (". (("/ aboutus.htm '));
    }

    Thanks in advance for the help

    You beat me to it: Yes, it was the parenthesis.

  • New to pix, need help with "debug access list of all the" command

    I have a pix 515 v6.3. I am tring to use then "debug access list of all the" command to see what traffic is stopped by my access list. However, I don't get any output. I turn execution of the command, but nothing happens. Other debug commands give the console. Perhaps, I do not understand what "debug to access list of all the" is used for. Any help that can be provided would be greatly appreciated.

    Tim

    Also try following the commands of logging

    LOGG on

    LOGG buff 7

    term Lun

    M.

  • New user needs help with the creation of an animation :)

    Hello

    IM fairly new to all Adobe Premiere Pro Im using CS6 and need help with it.

    I want to make a video and add a scene that looks like the beginning of this video Sarah the movie - YouTube , to be exact - the animation at the location where you type your user name and password, I can do that in Adobe Premiere Pro? I want to do exactly the same animation and no idea of how do

    Would appreciate any help!

    There are several ways to do so.

    One way would be to create a title with the name and title with the password.  Add the crop effect to each and the keyframe as necessary. Adjust the size and position as desired.

  • Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

    Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

    Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

    I was wondering if I saved a layer somewhere and set it as a default value.

    If you group the layers, you will be left with a single layer, thus spreading your concern.

    Suggest that you do the following:

    1. Make sure you have the latest drivers for your printers
    2. Reset the default preferences.

    Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

    Items nearby and let regenerate the file.

  • need help with the mac version of PES

    need help with the mac version of PES

    If you follow the 7 steps you can dl a trial via the links here: http://prodesigntools.com/tag/ddl

    and activate it with your serial number.

    If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

    p.s. If you need a more direct link, you must specify the exact version you want.

  • Installation of the elements 11 on Mac. Need help with installation error "Setup wants to make changes.

    Installation of items 11 Mac 10.8.2. Need help with Setup error: installation wants to make changes. Type your password to allow this. "After entering the Adobe password, nothing happens.  Locked for more than installation.  Any ideas?  Phone support Adobe couldn't help.

    Just prior to leaving changes (installation in this case) is done on the Mac OS application password & it must be the password for Mac system. This password is the native guest of the system clean & accept the password only. Please make sure that it's the right password (all/admin rights) and the game should work.

  • I need help with an installation failure to interpret and troubleshoot a Setup log.

    Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

    Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

    According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

    Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

    https://discussions.Apple.com/message/26309669#26309669

    I used this method with success to install FCS2 in Yosemite:

    [click on images to enlarge]

    However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

    First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

    Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

    If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

    It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

    Here is the post on MacRumors with pre-installed Setup log:

    http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

  • I need help with the program of Photos on my macbook pro

    I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

    Hi, I'm fighting to open same mine, making a new software update

  • I'm suddenly needing help with my browser Firefox (6.0.2)

    Hello
    I'm suddenly needing help with my browser Firefox (6.0.2)

    (OS: I use Windows XP).

    When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

    I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

    This problem started today, September 8, 2011 and has never happened before.

    Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

    I also noticed that just before I "opened" Firefox, I now get a small box indicating:

    [JAVASCRIPT APPLICATION]
    Handl exc in Ev: TypeError: this oRoot.enable is not a function

    This never appeared before - I hope that it offers a clue has what is wrong.

    The browser not be stuck in Mode safe, said by the way.

    Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
    (A friend sends this request in my name from their pc)

    Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

    If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
    In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

    Thanks in advance.

    One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

Maybe you are looking for

  • How to create a Firefox 3 profile from the command line?

    I would like to create a new profile on a FreeBSD 7.2 - amd64 machine using Firefox 3.5 under the CONSOLE. When I type: Firefox3 - CreateProfile "foobar".Error: no display specified No there is NO way to create a profile without having a viable displ

  • Cloud Services button not working not not on Toshiba 39L4353D

    For these past few days, whenever I turn on the TV button on the remote control (the one with the little house on it) cloud services does not. Everything else seems to work fine on the remote, so I find myself by going to tools and reset the TV whene

  • HP recovery discs - Vista - can be installed on a smaller drive?

    HP M9340D Windows Vista bits. Original HD was 750G.  Can I use a low cost from 500G to reinstall using system restore disks? System Restore had no problem overwhelming on a WD 1 TB disk partitions (I don't know the resulting size because it wasn't in

  • Firefox has encountered a problem when I connect to my mail on yahoo

    When I use Mozila in SafeMode to open on the Mall is perfect. Other connections on my mail on yahoo in normal mode always end with the same dialog box announcing that firefox.exe has encountered a problem and needs to close. It's happen only on my pc

  • Windows install error 2203 and system error 2147023504

    When I try to download programs I get error messages saying: MICROSOFT SQL SERVER 2008 NATIVE CLIENT - Setup has encountered an unexpected error and.  The error code is 2203. Database: C:/Windows/Installer/158445.ipi - cannot open the database file -