New user cannot access any area of activity

Similar Questions

• New user cannot access the transferred music draws on Windows Media Player 11

  I just added a new user to my window 11 downloaded pc game on there it does not show the music I would also transfer music from my library in library here and can u help me with these problems

  Library to point to the folder monitored by the player

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Firefox starts, but cannot access any website.same issue is experienced with Chrome, not Explorer

  Hello, I have a problem with surfing with Firefox. The browser starts but cannot access any Web site. The same question is experienced with Google Chrome. However, Internet Explorer works smoothly. Thank you

  Some problems occurs when your Internet security program has been implemented.
  trust the previous version of Firefox, but not more acknowledges your
  update as being approved. Now how do I solve the problem: to allow
  Firefox to connect to the Internet

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
  • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

  Configure the firewall so that Firefox can access the Internet. {web link}

• Error message: Windows cannot access the specified device path and the second user cannot access the internet

  Original title: I have two users on Vista. We get to the top with windows can not access the specified device path.etc. The other has no problem

  The second user cannot access the internet. Can't access window appears. The other user is not problems.

  Hi Rickravel,

  1. what type of account you use?

  2. This only happens when you access Internet?

  3. when the problem started?

  4. you remember to make changes to the computer before this problem?

  Step 1:

  You can start in safe mode with network and see if the problem occurs in the account.

  You can see the following link to start in safe mode with network.

  Start your computer in safe mode

  Note: Restart the computer to boot into normal mode.

  Step 2:

  If you use Internet explorer, then you can try to disable add ons and check if it helps:

  Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:

  a. click on start

  (b) in the search box, type in Internet explore

  c. Select Internet (no add-on mode)

  If you were able to access the Web site without any problems, then the module may cause the error.

  You can read the following article and try the steps to activate the modules individually determine which Add - ons may be the cause of the problem.

  How the modules of the browser affect my computer?

  Hope this information is useful.

• Cannot access any browser + Taskmanager register Antivirus

  Hello
  I have a system with Windows XP Professional (SP2) + McAfee Antivirus installed... After inserting my pen of friends drive, I can't able to access taskmanager (Mozila Firefox browser), my Antivirus (McAfee), dialog box run and prompt etc... But I can able to run MATLAB, SIMULINK. Even after safe mode with administrator password I can't able to access which above I said. If I think mozila it opens but quickly it closes. Safe mode with networking mode command prompt / safe as I can't access the task or the command prompt, the registry Manager... Please help me...

  Kind regards
  Ubabmar.

  Hello

  Method 1.
  I suspect that it is a virus and I highly recommend to run a Scan of Virus online.
   
  Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
   
  b. run the malware removal tool from Microsoft.
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
   
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  Method 2.
  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 3.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  I hope this helps.

• Other users cannot access the Internet

  I'm helping a friend with his pc and she and her husband have their on user accounts on Dell Dimension 8400 with a Verizon FIOS connection.  We were above to delete a message and then she went into the internet and the lights went out in the House and back but now she cannot access the internet.  Her husband can in his story, but she can't.  I tried to create a new user to see if it has been altered for the failure, but still cannot access the internet.

  It opens the Web page but does not display anything, and freezes.   Any help would be greatly appreciated.

  Nancy
  
  

• Problem demo FOD: new user cannot control

  Hello community,
  
  I have try demo FOD for webcenter, it worked badly in all taskflows using the ngreenbe of the supplied user, but when I tried to register a new user and buy something with her, there was something wrong.
  
  With the new user, I can browse and add it to the cart, but when I checked and click on "Submit order", the "order summary" returned 'no more lines', missing just the items in my cart! When goto 'my orders', I got the message "you don't have any order.
  
  No errors revealed in the Journal of weblogic background creating new user or do shopping with the user.
  
  Anyone who has experienced the same situation?
  
  
  Thank you
  Todd

  Todd-

  Unfortunately, on the side of registration of DOM is not hooked on the security module. For example, when you click check out, you're probably still logging as a ngreenbe (look at the top right of the page go to know that you are connected as). You cannot open as one of the listed users (ski, ngreenbe, ahunold). These are the only users configured in the security module. The registration point is to show how to use a dynamic workflow and a train to insert records, and it abstains actually adding the user to the JAZN module.

  Kind regards
  Lynn Munsinger
  Oracle JDeveloper & ADF Product Management

• Tecra A4: Matsu * a s uj - 831 - cannot access any data CD

  Hello

  I have a new toshiba tecra a4
  I have the combo dvd: Matsu * a UJ - 831S
  and I have the following in less than 4 months of use problem:
  Since yesterday I can not access any data cd, audio CD are ok, so on DVD.
  When I go to my computer and click on the drive I get the message "D:\ not accessible incorrect function".

  I tried to uninstall the software, etc. But nothing.
  I tried to boot from the dvd from Toshiba, is the beginning, I tried to boot from cd does not start.
  so the problem is hardware
  I downloaded the firmware (Loder_831_V102.exe), but he said: "the target disk is not connected" and I can't upgrade.

  So what is the problem, can it be fixed?

  Hello

  It's not easy to tell how to solve this problem.
  But first of all, you can try to remove this device in the Device Manager.
  After startup, the operating system should recognize the drive again.

  If this procedure doesn't help, well it could be a disk failure.
  If the warranty is valid, you should ask the ASP for a replacement.

  Good bye

• Cannot access any shared folder on the network of windows 7 Professional

  Hello

  I have a very strange problem.

  I have a home network with 4 computers.
  I can share files from any computer to the other.

  Recently, I bought a new laptop Lenovo E530 in with Windows 7 Professional installed on it.

  The problem is that I can't access any shared folder on my home network by '\\com-name '.

  I cannot yet access the folders on the computer that is shared from the inside, by specifying there name with the prefix "\".

  However, I can ping or even make remote desktop on other computers on my network.

  I can also access shared folders on my Windows 7 Professional from other computers.

  Looks like there is something wrong with the configuration of my OS from Windows 7 Professional blocking access to any shared folder on my network.

  I get the following error message:

  Windows cannot access \\comp-name

  Check the spelling of the name. Otherwise, it could...

  Error code: 0 x 80070035

  The network path was not found.

  I tried to use the button to diagnose, but without success.

  Help, please

  Dudi.

  Hello

  I suggest you try all the steps from the following link:

  Sharing of files and printers
  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also: File and printer sharing: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• The VPN Clients cannot access any internal address

  Without a doubt need help from an expert on this one...

  Attempting to define a client access on an ASA 5520 VPN that was used only as a

  Firewall so far. The ASA has been recently updated to Version 7.2 (4).

  Problem: Once connected, VPN client cannot access anything whatsoever. Client VPN cannot

  ping any address on internal networks, or even the inside interface of the ASA.

  (I hope) Relevant details:

  (1) the tunnel seems to be upward. Customers are the authenticated by the SAA and

  are able to connect.

  (2) by many other related posts, I ran a ' sh crypto ipsec her "to see the output: it

  appears that the packets are décapsulés and decrypted, but NOT encapsulated or

  encrypted (see the output of "sh crypto ipsec his ' home).

  (3) by the other related posts, we've added commands associated with inversion of NAT (crypto

  ISAKMP nat-traversal 20

  crypto ISAKMP ipsec-over-port tcp 10000). These were in fact absent from our

  Configuration.

  (4) we tried encapsulation TCP and UDP encapsulation with experimental client

  profiles: same result in both cases.

  (5) if I (attempt) ping to an internal IP address of the connected customer, the

  real-time log entries ASA show the installation and dismantling of the ICMP requests to the

  the inner target customer.

  (6) the capture of packets to the internal address (one that we try to do a ping of the)

  VPN client) shows that the ICMP request has been received and answered. (See attachment

  shooting).

  (7) our goal is to create about 10 VPN client of different profiles, each with

  different combinations of access to the internal VLAN or DMZ VLAN. We do not have

  preferences for the type of encryption or method, as long as it is safe and it works: that

  said, do not hesitate to recommend a different approach altogether.

  We have tried everything we can think of, so any help or advice would be greatly

  Sanitized the ASA configuration is also attached.

  appreciated!

  Thank you!

  It should be the last step :)

  on 6509

  IP route 172.16.100.0 255.255.255.0 172.16.20.2

  and ASA

  no road inside 172.16.40.0 255.255.255.0 172.16.20.2

• Printers under the original user have the printer properties grayed out for new users, even if they are members of the Administrators group

  Windows 7 Pro 64 bit (and 32-bit) Setup on the domain.
  The domain users group is added to the local Administrators group.
  Printers are installed under the first domain user.  These aren't the printers shared, but local usb printers or printers attached to the tcpip port and driver installed.
  All right.
  Users in the second domain is connected to the computer.  They are part of the local Administrators group, because they are part of the domain users group.
  They're going to look at the properties of the printer and almost everything is grayed out.
  Why?  Because they are part of the local Administrators group, they should not have full access?
  I look at security for printers and I don't see the first person in the list because it was created with their profile, but I also see local administrators that this new user belongs to a group.  Now I can take everyone and increase the rights and then log in as a new person and they can then change the properties, but why can't new users "who are admins the" does not alter the properties?
  Thanks in advance for your help.

  Hi Gsaunders,

  If the computer is connected to the domain network then the question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  It will be useful.

• VPN users cannot access Tunnel

  Hi all

  I have a problem, I have 2 sites both with ASA 5520, they are both connected via a site to site VPN.

  It works very well all users in site A can access resources in site B and vice versa.

  The problem comes when a user connects to a remote user VPN site has they cannot access or anything in site B same ping if the FW them delivers an ip address in the range for the site.

  Im sure there is something simple that I missed.

  Thank you

  If the VPN Client pool is in the same subnet as the site of A LAN, then you are probably missing just the following:

  (1) check if you have divided political tunnel, and site-B LAN is included in the ACL split tunnel.

  (2) configure 'same-security-traffic permit intra-interface' on the site A ASA.

  If the above has been configured, please share configuration the two ASA to further check where it is.

• AnyConnect VPN users cannot access remote subnets?

  I googled this until blue in the face without result.  I don't understand why Cisco this so difficult?  When clients connect to the anyconnect vpn, they can access the local subnet, but cannot access the resources in remote offices.  What should I do to allow my anyconnect vpn clients access to my remote sites?

  Cisco 5510 8.4

  Hello

  What are remote sites using as Internet gateway? Their default route here leads to the ASA or have their own Internet gateway? If they use this ASA for their Internet connection while they should already have a default route that leads traffic to the VPN to the pool, even if they had no specific route for the VPN itself pool. If they use their own local Internet gateway and the default route is not directed to this ASA then you would naturally have a route on the remote site (and anything in between) indicating the remote site where to join the pool of 10.10.224.0/24 VPN network.

  In addition to routing, you must have configured for each remote site and the VPN pool NAT0

  Just a simple example of NAT0 configuration for 4 networks behind the ASA and simple VPN field might look like this

  object-group network to REMOTE SITES

  object-network 10.10.10.0 255.255.255.0

  object-network 10.10.20.0 255.255.255.0

  object-network 10.10.30.0 255.255.255.0

  object-network 10.10.40.0 255.255.255.0

  network of the VPN-POOL object

  10.10.224.0 subnet 255.255.255.0

  NAT static destination DISTANCE-SITES SITES source (indoor, outdoor) REMOTE static VPN-VPN-POOL

  The above of course assumes that the remote site are located behind the interface 'inside' (although some networks, MPLS) and naturally also the remote site networks are made for the sake of examples.

  Since you are using Full Tunnel VPN should be no problem to the user VPN transfer traffic to this ASA in question.

  My first things to check would be configuring NAT0 on the ASA and routing between remote sites and this ASA (regarding to reach the VPN pool, not the ASA network IP address)

  Are you sure that the configuration above is related to this? Its my understanding that AnyConnect uses only IKEv2 and the foregoing is strictly defined for IKEv1?

  -Jouni

• User cannot access local drives

  Win7 - 64 bit - new out of the box – users of local computers work fine - joined the field - add a domain user as a domain account user - user 'all programs' missing - administrator can access the shares of domain - domain user cannot see local readers - domain cannot run command line programs - domain user has been deleted and restored - changed permissions on the C drive for everyone «» total control"= thank you

  Hi Thensley,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the domain user account.

  The question you have posted is would be better suited to the Technet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.