new user needing help

Hello world.

IM new to this so please be gentle. I have a motorola milestone (1 week) on orange. I had to get orange to set the phone so I can get on the internet.since this is a screen of motorcycle car always comes when I press the home button. Any ideas that it is and how to stop the it.also I can't disconnect from the internet, unless I turn off the phone. I also have a htc phone and it simple to turn off the internet but cant seem to find anyway to do this on the milestone.

any help that anyone can provide will be much appreciated

The Milestone is intended to be a 'cloud' device and therefore will be always connected to the internet (if you have the settings configured properly) unless you use an application that disables voluntarily for you. In general, it just means that any application that needs to connect can, without asking, and e-mail can be collected - again without notice to you. If you are on a package data unlimited so this isn't usually a problem.

If you really want to "disable internet" then something like APNDroidworks by activating / disabling your internet settings between known States, good and bad. For the user what that means is that you have a button that you can put on a home screen that will switch your internet enabled or disabled.

I don't know what OrangeWorld is or is - that you just want to say that when you start your browser you end up on a page called OrangeWorld? If so, is it as simple Orange to configure your browser so that the homepage is OrangeWorld?

As for your home main problem is weird. I assume you mean the key 'home' of material and not a button on one of your home screens? As someone has said, the only ways, you should see the car home are either by the presence of a magnet near the rear of the case or by running the application of the "motorola car home."

If you use a carrying case for your phone, make sure it does not use a magnet for keeping it closed, and if it is use a magnet to take the phone out of the case and try again by pressing the home button.

Tags: Motorola Phones

Similar Questions

  • New user needs help with the creation of an animation :)

    Hello

    IM fairly new to all Adobe Premiere Pro Im using CS6 and need help with it.

    I want to make a video and add a scene that looks like the beginning of this video Sarah the movie - YouTube , to be exact - the animation at the location where you type your user name and password, I can do that in Adobe Premiere Pro? I want to do exactly the same animation and no idea of how do

    Would appreciate any help!

    There are several ways to do so.

    One way would be to create a title with the name and title with the password.  Add the crop effect to each and the keyframe as necessary. Adjust the size and position as desired.

  • New user needs help: pattern buffer!

    Hello. As I am a new user on cs6, I have a little problem. When I use the stamp tool to ground that each model is black and white that it even used to be colorful, so how can I change it back?

    By any chnce is your document in grayscale mode?

  • new user needs help to start

    I am a new buyer/user of lightroom 6.  I installed but don't know how to start.  Anyone can guide me please thanks to start-up?

    Hi Alain,

    Please see tutorials. They are the best way to start with any product.

    Lightroom tutorials | Learn how to use Photoshop Lightroom

    Photography: Where to start | Adobe Photoshop Lightroom CC tutorials

    Learn Lightroom 6 / CC - Episode 1: Quickstart - YouTube

    Hope this helps

    ~ Assani

  • A2107A new user needs help with a new media player

    Hi please can anyone suggest a good player to install on my Ideapad A2107A as a built-in custom plays several popular formats such as MKV and some others.i have installed free VLC Player, but I use potplayer on my PC which is excellent and will play all formats, I need... only it is not listed in the application listed , but only "DAUM" is (responsible for the coding of potplayer) I need to use the player in the Portugal where access to broadband is not very good... I'm going on vacation that's why I bought my Lenovo... Thanks a lot for all the help on this topic

    Hi, adrian631330

    Welcome to Lenovo community Fourms!

    I think you can see this Post.

    http://forums.Lenovo.com/T5/IdeaPad-IdeaTab-Slate-tablets/A1-the-best-video-players/m-p/648187/highl...

    You might just find the right App for you!

    Hope this helps,

  • Former Nikon user needs help w / AF on a 5 d MK I

    I bought a used 5 d MK I and new EF 24-105mm f / 4L and I'm having problems with the autofocus. I shot a test subject to 16 feet of focal plane (used a tape measure), but moved Center AF point focal beyond the mark of 20 ft on the lens. I was shooting 50mm at f5.6 so sharpness was ok, but really sweet because the subject was on the near end of the focal length range. When I shoot wide open at distances more close photos are unusable. Any ideas on that? What I need to send to Canon for repair, or is this a known problem with this model of body? I shot Nikon for 20 years, so I'm totally out of my element here; I could not yet understand how to use the self-timer for family vacation photos. Any help for a beginner user of Canon is appreciated!

    Thanks for the reply! I pulled the manual on the web when I got the camera and think I have everything set up correctly.

    What I really need help, is if there is a known issue with AF on the 1 5 or if I use the wrong settings. I'm really just trying to determine if I need to send the body of the camera, lens or two to Canon for repair, or if I would be wasting my money doing so.

    My test subject was 16 feet more distance, but the camera and lens determined she was 20 feet away. The camera was tripod mounted with IS off, Av mode, ISO 800 set at f5.6, 50mm, I Focus mode AF and the central focus point square on the nose of subjects. I used flash ettl and unfortunately I can't remember what was the shutter speed, but I can remove it from the EXIF if it's important. Development was strong at about 5 feet behind the subject.

    The questions remain the same with or without UV filter on the lens. AF seems pretty good for macro up to about 10 feet away, then it seems to be far away. Is this a limitation of the AF system on this unit or could be improved spend the money to have the Canon watch? Or I'm better this unloading at KEH and get another camera?

  • New user - need tips to improve the performance and graphics ability

    Hello

    I am a new user.  I loaded Windows 7 64-bit today, and it seems to work fine. (I used only Explorer.) I downloaded by Reallusion CrazyTalk and software is lagging terribly, and the image is blurry. The Forum of CrazyTalk, they recommend updating graphics drivers to fix blurry images. On the NVIDIA site, when I asked her to automatically detect the driver update, it says none is available for my computer (my Mac).

    Question: They have updates driver for Windows... When I am running Windows via Fusion, should I different graphics drivers than those on my Mac?  If so, means that I need another graphics card?  * Of course I'm not super technical. **

    I have attached a screenshot of my info/display of charts:

    In addition, molten, I increased the RAM to 3 GB (3000 MB), but it has not improved the situation.

    CrazyTalk allows the user to make a photo 'talk '... It is lively and contains the audio.  I usually save files as uncompressed reviews that are about 4 GB in size (when I worked directly on a PC) but today to test it's obviously "too much" for this system.  (It would have probably been about 2 GB). So I recorded a MP4 (3.7 MB), which has always been a time loooooooong to save - 30 minutes.

    Other info:

    Model name: iMac

    Model ID: iMac9, 1

    Processor name: Intel Core 2 Duo

    Processor speed: 3.06 GHz

    Number of processors: 1

    Total number of cores: 2

    L2 Cache: 6 MB

    Memory: 4 GB

    Bus speed: 1.07 GHz

    Boot ROM version: IM91.008D.B08

    Version of the SCM (System): 1.37f3

    I would appreciate advice and links to information that will help me.

    Thank you

    Dora

    TatianaTheDog wrote:

    I am a new user.  I loaded Windows 7 64-bit today, and it seems to work fine. (I used only Explorer.) I downloaded by Reallusion CrazyTalk and software is lagging terribly, and the image is blurry. The Forum of CrazyTalk, they recommend updating graphics drivers to fix blurry images. On the NVIDIA site, when I asked her to automatically detect the driver update, it says none is available for my computer (my Mac).

    Welcome to the Fusion community.

    Question: They have updates driver for Windows... When I am running Windows via Fusion, should I different graphics drivers than those on my Mac?  If so, means that I need another graphics card?

    Your don't need another graphics card.  By necessity, VMware can pass through native graphics of your iMac to any guest including Windows operating system.  VMware provides its own graphic adapter of substitute (WDDM 3D) or VMware SVA II, with its own pilots.  Apple takes care to provide you with the latest drivers for OS X, you will never have to download all the drivers directly from the graphics vendors.  Details about the virtual hardware and its differences of capacity are covered in the FAQs on VMware Fusion

    Regarding the VMware graphics drivers who are in the VMware tools and are supported if you have installed Windows 7 using Windows Easy install feature in the new computer Wizard.  If you do not use Windows Easy Install (or don't remember), the icon of blue squares of VMware in the system tray is a Visual indicator, they are installed.  But you can confirm the video adapter by using the Control Panel, search for display > change display settings > advanced settings to look at your graphics card.  For Win7, the default value is VMware SVGA 3D.

    Whenever you want to refresh the VMware drivers you can select Virtual Machine > install VMware Tools to install or run the option repair after the Welcome screen.

    In addition, molten, I increased the RAM to 3 GB (3000 MB), but it has not improved the situation.

    Based on the requirements of CrazyTalk6 system I could find, you do not need to allocate as much RAM (3 GB).  Depending on your other needs Windows 7, 1 GB to 2 GB would be better, based on your host, the RAM size.

    Pentium IV 2 GHz or higher recommended

    512 MB of RAM or more recommended

    1 GB space drive or higher recommended

    Duplex Sound Card/VGA Card/keyboard/mouse/Microphone/Speaker

    Display resolution: 1024 x 768 or higher

    Video memory: 128 MB RAM or higher recommended

    Windows 7 / Vista / XP SP2

    Internet Explorer 6 or higher, Firefox 2 or higher

    DirectX 9 and WMEncoder 9 are required to export WMV

    Recommended hardware:

    CPU dual core or higher recommended

    1 GB of RAM or more recommended

    Hard drive 2 GB or more recommended

    Video memory: 256 MB RAM or higher recommended

    Things to try:

    The 3D Aero interface may impose the virtual graphic adapter, then you could try to disable that by getting the properties of the desktop background, choose Customize and change the theme of Windows 7 Basic.

    More radically, you can stop the virtual machine and disable 3D graphics in the VM > settings > display > uncheck "Accelerate 3D graphics."  This will cause Windows 7 use the legacy VMware SVGA II adapter.  The oldest non - 3D adapter looks like it meets the system requirements but requiring DirectX 9 encoding for WMV exporting.   If you save without video compression, that may be OK.  If the non - 3D adapter does not meet requirements, I am sure that the program will display.

  • BlackBerry smartphones new Torch 9800 user - need help with the Message 'Conversation' feature

    I just spent to an older Blackberry Curve to the torch. I'm used to standard text "and will answer' or 'create a new SMS' but T-9800 'Conversation' feature SMS is maddening - all SMS communications with a contact are transferred in a single conversation, regardless of the date or content. I am also unable to send separate replies to individual SMS - just one more in the conversation messages.

    When I checked the text Message Options, the option to display only that I could find was for the 'Bubble' or 'Line'. I also was not able to find all the features that allow the user to put an end to a conversation with a contact or start a new one.

    If someone has encountered this? If so, is there an option or feature I'm on just to correct these problems? And of course, how?

    Thanks in advance!

    Consulted several other forums and just had a face to face with Best Buy rep - looks like the term/phrase I was looking for was "SMS threading"... and there is currently no option on the current operating system of torch for clear thread of SMS functionality.

    Well - it is what it is. I'll have to take consolation that, apparently, I'm not the only one who had a problem with the thread SMS functionality, and a possible fix might be made available in the next software update.

  • I forgot my admin password need to install the new program need help please.

    I forgot my admin password, have tried several times but don't remember. I need to install a new program as soon as possible and need assistance please.

    I forgot my admin password, have tried several times but don't remember. I need to install a new program as soon as possible and need assistance please.

    Sorry, we are not allowed to help users to bypass the password protection, regardless of what are "reasons".
    Here's the Microsoft Policy about this:
    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • New user needs access to the old user profile files

    Windows 7 Pro on a W2008 domain, the latter leaves the company; User_B will take his place and needs access to all files (including e-mail - WindowsLiveMail);  There are currently three email accounts configured in the profile of the latter.  What is the best way to give User_B access to the data?  I tried to copy the data from the profile folder to the folder profile User_B, but when I try to open a document (Office 2002), I get "there was a problem sending the command to the program".

    When I tried to copy the profile via the control panel... Settings, user profiles, the option "copy to" was not available.

    There must be a relatively simple way to do this.  Help, please.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

    If you give us a link to the new thread we can point to some resources it
  • High power user, need help!

    Hello

    I'm a long-time mac user, so even though I know how to use pc and windows OS am nowhere near as competent as you guys.

    I am looking to buy a new laptop, but have high power requirements. I'm going to do a lot of 3d modeling & made as well as the use of photoshop files.

    Can help guys point me in the direction of a computer good dell laptop. I'm not the biggest fan of the envelope of xps and would rather something of the dell precision range Sylvie that this is certainly not a decisive factor.

    As mentioned that it will be used a lot so I need something that can really take what I throw at it.

    An important factor will be what windows operating system to run with. I was not too impressed by what I've seen of Vista but do not know much. Should I try and run Windows xp or vista uped has it's game?

    Screen size wise I don't mind past for 15.4 "instead of 17" as could always get an external monitor to sit with him.

    Help, please

    Stephen


  • Suite Adobe CS5 - purchase new macbook, need help

    Currently, I have a macbook pro 10.10. It runs very well my suite adobe CS5. But my computer is getting old, runs more slowly, and I want to get a new.

    I don't want to have to buy more adobe, or switch to the cloud.

    I received after 5 years of my college. This is why I don't have an invoice or a receipt.
    I need a new code / find my serial number to install the same programs I ALREADY HAVE on my new computer.

    I tried to talk to chat online with no help reps.

    Someone help me please.

    Lost information - response #1 in https://forums.adobe.com/thread/2008767

    Of course, your CS5 probably won't work on a new computer

    CS6 and previous programs have not been tested and will not be updated to run on El Capitan Mac.

    -which means you are trying to use CS6 and earlier at YOUR risk of having problems

    -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

    -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

    Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

    -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

    -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

    -the guardian https://support.apple.com/en-au/HT202491

  • new Member needs help, reload Programs window 8 and origanal Acer Iconia W700 in

    I messed up my computer by installing windows 8.1 and everything went.  No keyboard more, Acer ring etc.  I want to just this 'thing' to the way it was.  It didn't go back or restoration available and do not send a set of discs, although I have a portable hard drive that might work, if there is such a thing as available backup discs.  Any suggestions would be greatly appreciated.  Do I have to send this thing to the manufacturer, is it a seller out there that makes this service, etc.

    TKS

    Hi JHRolfe

    When you say ' it didn't go back or restoration available "do you mean there is no recovery partition ("eRecovery")? If you restart your machine & press logo Acer ALT F10 & - this should take you in the eRecovery mode where you can restore your computer like new.

    If your keyboard has stopped working, see if you can borrow someone's USB keyboard and try from there.

    If all else fails, then Yes, you will need to send it for repair. Chat with Acer for your area by going to the Web site, click on "support" and then "contact Acer".

    Good luck!

  • VM Workstation new boy needs help!

    Hi everyone... first post so be nice...

    I'm trying to set up a unified base cluster Communications, I'mon the first server and I amtrying to get the job of network... I have install VMNet2 to bridge with a spare part nicon my desk so I can connect to the cluster for the world outsideand I need to configure DHCP on the network, but whenever I go settings DHCP it forces me to use a 192.168.255.0 subnetand I can not change it... any ideas? No one has experiencein general implementation CiscoCall Manager 6.0 or higher to help VMware</span >?

    Thank you all...

    Rich

    The bundled with VMware DHCP server does not provide DHCP addresses NAT and host networks only. The idea with deck is that it will get an IP address from the DHCP server on your local network or you use a fixed IP address, as is the case of a physical machine on the same LAN segment.

    ---

    If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

  • I'm new. Need help with subforms

    I followed messages and figured out how to use the buttons to add and remove subforms, but I want subforms to add when the button is not the end of the list.  Remove the work this way, but I did not add to the work. Any help would be greatly appreciated.

    You will need to do it in two steps. .will add it (put it down) then do a moveInstance.

    Paul

Maybe you are looking for

  • Cannot download updates saying that I am not the original owner of mac.

    Apple sends messages that I need to go to the Apple app store and update 3.  I'm going to do, and he rejects my claim by saying: I'm not the original owner of the mac.  I am the sole owner.  This has happened after the update to el capitan.

  • Problem in inserting elements of the tree

    Hi all. I encounter the problem by inserting the tree in a recurring way of parent child items. My requirement is that whenever I press the button, a parent must be inserted in the tree with her child. Its output should be like Error code: 7400 Error

  • Microsoft lifechat lx-3000 - whistling distortion from the microphone

    Switch off the speakers and try again headset. Sound cards usually feature a digital-to-analog converter (DAC), which converts recorded or generated digital data into an analog format. The output signal is connected to a headphone amplifier, or exter

  • Impossible to root after 4.0.4

    Hi all Someone was lucky to rooting 4.0.4? I'm following the doomlord root guide. http://Forum.xda-developers.com/showthread.php?t=1601038 I followed the correct instructions, but no luck. I rooted my phone before with the same kit doomlord, but now

  • update of refusals installation code 652

    I tried to Install Microsoft Silverlight (KB2495644) Download size: 6.0 MB Update type: Important This update of Silverlight improves the performance of startup, accessibility features, reliability, security, improves the support of business and incl