New user of Clip - new on the marking of files...

Similar Questions

• Users of readers to save the xml data file

  Hello
  We can e-mail through the form xml data file without its extension drive. It is very good. Instead of emailing, I want just to save the xml data file in my local system.
  What is the syntax to get it? To send email, I usually create a "submit" button and the area of the submittoURL write us mailto:[email protected].
  What to write to save it on the local computer instead of emailing? I tried saveto: C:\NewFolder or fileto:C:\NewFolder. Nothing works. I think I'm missing the good syntax here.
  I know its possible by RE the pdf, you can get using savedataXML(). I want to achieve this goal without the form.
  Thanks in advance,

  Chaitanya

  The best you can do is set up a submitForm action and uses a type mailto URL. This will prompt the user to attach to an e-mail message using their email client or save it to a file.

• How the clip markers can be promoted in chronological markers?  I cut a clip and rearranged the order of the pieces in the timeline panel, so now I want a set of benchmarks that reflect their position in the timeline panel.

  Clip markers have as their frame of reference of the timeline, they came.  If you create a new brand of element in a new timeline, the marker in time is measured from his original script, not the new timeline where he is.  Currently in CC 2015 organization there is no way to translate the clip marker references 'Local' in the 'World calendar"in which they now live.  I captured on video a 8mm film that is chronologically jumble of short scenes.  I placed the chronology of chapter for each scene markers, export the list of markers and finally understood the rearrangement of pieces of scenes he needed to put everything in chronological order.  Thank God for the ability to export the list of markers, just as I needed!  So the whole sequence has 85 chronological markers, dividing the sequence into 5 pieces and rearranging puts them all in chronological order.  Obviously, I don't want to have to restore the scene boundries 85 times, I did as a necessary step to solve the puzzle.  I think you might meet one day some of these problems:

  1. the most obvious thing is located in the calendar for a piece, lift it and 'paste insert' where it belongs on the timeline.  Problem: Lift or excerpt from don't lift or extract chronological markers with it, so when "Insert you a block", the piece inserted in the timeline has lost its bearings, they were left.

  2. How about you make a sous-suite of the segment to move?  Yes, it carries all the tracks, but not the chronological markers whence he came.

  3. ok, I'll export the calendar together with chronological markers and reimport - ah, Yes, success, the chronology of the markers are now item, marks on the imported clip (the entire chronology).  That's great, because the clip markers are sticky with the clip, I can it chop, rearrange to put markers in chronological order without returning any info title marker.  Feeling beat with the reorganization completed five segments of the original timeline, everything is in order, nothing was reinstated, the timeline with its clip of chapter markers is ready to export to still make the DVD!  Yes, you guessed it, element chapter marks are not exported in yet.  The chronology of imports still with a marker, Chapter 1, at the beginning.

  4. There must be a way, stacked the timeline with the time markers on it on the icon for "New"... ', it is the same as #3 above, but simpler.  Historical markers are now the clip markers that don't export in yet.

  From my experiences, it is therefore impossible to solve my problem without completely restoring scene boundries and type chapter titles.  There are two repositories coordinated, clip) 1 local and 2) global chronology; and there is no way to go from one to the other 'mass'.   There is the glove, I'm sure someone has a way to do this without returning the title of chapter 85 markers.

  I have not found an automatic way to do this, but here is an efficient manual method that requires no titles of chapters Overtype.

  Either drop your timeline that has mounted the icon "Create New" brands, or export the timeline and import it back.  You now have a new timeline and markers are now on the video clip.  Now, chop and reorganize this video clip, it is in the best new order, and the clip markers stick with the sections of the clamp.  Now this procedure migrates the markers of the clips to the timeline (promotion):

  Start at the beginning of the timeline, select the video clip. (The video clip must be selected for M to open the marker editing window)

  1. type change M to find the first element brand, type M to open the editing window of clip marker, select the marker title and copy (control-C), hit Cancel

  2 hit the icon of reference in the program monitor pane, which puts a green marker on the timeline at the same time as the brand of element,

  3. double-click on the Green marker, paste the title of marker by control V, select the radio button of chapter markers, click OK.

  Repeat steps 1-3 to promote all the markers of clip of historical markers with the same marker titles.  Since we cut the timeline to reorganize, there are several video clips.  As you progress, make sure that the clip that you are working on is selected, otherwise M will not open the editing window, instead, it will place a chronological marker.  In short, follow this procedure exactly, it works.  It's a stupid job, but it does the job with without having to retype marker titles.  The chronology chapter titles now think time on the new timeline and they will export in yet.  Hope someone finds it useful at some point in the future.

  Perhaps team first see the usefulness of this and add a command 'Promote the clip for mounting marks markers' and "retrograde chronological markers for the clip markers" (conservation type, title and comments).  It would be a powerful addition.

• Minimize the size of the animated gif file?

  This is the original animated gif file:
  http://img186.imageshack.us/img186/7232/bandierajuve.gif
  And that's what I created him: http://img186.imageshack.us/img186/5286/80916350.gif
  
  The size of the original is just 7 KB, but my new is 113KB
  I exported the stages of my new to the separate gif file, and they are just around 2 ~ 3 KB per gif file.
  
  So what I don't understand, is why I add just that all the steps in a new, but its size is so large?
  
  Setting:
  Animation

  hiru169 wrote:

  > I changed the configuration of my gif file that you said but its size is now
  > 110 KB. Do I need to create it in a completely new to it worked?

  N ° you just need too export it rather that save it. Here is 7.46 k
  After the export with the settings I suggested you use.

  http://www.playingwithfire.com/80916350.gif

  --
  Linda Rathgeber - Adobe Community Expert
  http://www.Adobe.com/communities/experts/members/8.html
  --------------------------------------------------------------

• Words of past & favorite appeared to a new user who portable Mozilla on the same computer resinstalled (even after history, cookies etc. were deleted)

  Words of past & favorite appeared to a new user who portable Mozilla on the same computer resinstalled (even after history, cookies etc. were deleted)

  Firefox would use a profile previously used folder if this user would use the same Windows account.
  It is always better to give each user their own Windows user account and protect your own account with a password if you are concerned about privacy issues.

  You can use the Profile Manager to delete all the files and the profile folder.

  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles

• I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?

  Corrupted user profile

  I have a corrupt user profile.  Windows XP. When I add a new can be the same, or should be different.  And the user's profile should match the user ID?

  If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  Otherwise, you will need to create another user and copy your data.  The simplest procedure is here:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• New Sansa Clip + not showing the track titles

  I recently got a new Sansa Clip + as a Christmas gift to replace my old (his helmet came out). I've updated to the latest firmware (even my old 01.02.18A,), and I copied my entire library of music from the old to the new player. Everything plays and works in the same way, except for one thing: on the new drive, the song titles never see the place, and the name of the file is always displayed during playback of a song. My old player would show the title of the song of the metadata instead of the file name during playback if it was available. I checked that the titles are actually there and were not lost through some freak mishap copy, so I'm puzzled as to why it won't work as my old drive.

  Anyone know of the issue and how to fix it?

  Well, Yes, that is my point of view. All tags are there, and all the rest (album, artist, etc.) is displayed in the main screen of the reading and the news section of track except for the title (who, oddly, has never had a track in any case information entry, but that is not the issue).

  ... well that, as strange as it may seem, the titles of the tracks seem to have returned - after, I moved music off the device to analyze the data volume to activate the Clip + Replay Gain. Really weird, but hey, it works now! (Maybe switch to the computer did it, since I initially copied it directly between devices?)

• Updatususer new user on PC. The user does not appear in the user accounts. It is said that the account was 9 hrs + connected. Is this a virus or some backdoor account made kids?

  Original title: Updatususer

  I was checking the parental control to see what children are in and I found this new user in there.  The user does not appear in the user accounts.  Updatususer, is the name.

  I tried to access any information in the file, but I see no file... even if it is said that the account was 9 hrs + connected.  Is this a virus or some backdoor account made kids?

  Thank you

  It seems to be used by a program to update NVIDIA.

  http://forums.nvidia.com/index.php?showtopic=178965

• Error when connecting with the new announcement of account in windows 8 client as "User must change password at the next logon"

  Windows Server 2003 R2 Standard Server
  Client-side: Windows 8

  The problem:

  I create a new user and let the "user must change password at the next logon' checked. When I try to log in with the newly created user I get an error saying "User must change password at the next logon" after ptoviding the new password.

  At this point if I uncheck the "user must change password at the next logon', then the user can connect properly.

  Can someone help me. Please let me know any problem OS compatibility between the server and the OS cleint.

  Jaril

  Hi Jaril,

  Thanks for posting your query in Microsoft Community.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  Hope this information is useful.

• "The service user profile Service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I had the same problem.  Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked.  Then I reinforced to the back and looked at the whole picture.  It turns out that it wasn't a computer after all problem but a question of the user.  Under folder C:/users/default in the end I managed to delete all subfolders except appdata.  So when you went to create a new user he could not find the correct files to copy to the new profile to store information in.  To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine.  Of course I could create my comments and new users account once again.  Finally.

• After changing the default threshlod in the user interface, where it stores the new value?

  After I changed the value of the threshold warning/cirtical metric, I noticed there was a 'TARGET_TYPE' _ 'targetname '. XML generated in forlder $AGENT_HOME/sysman/emd/collection. It assumes that the registered here threshold has priority over that of collection.xml in $AGENT_HOME/sysman/admin/default_collection, right? I'm very curious, is if the new threshold is also recorded in some tables, the agent generates the 'TARGET_TYPE' _ 'targetname '. XML after reading the new value? If it is, could someone offer me the East?
  
  Thanks in advance!
  
  
  Thank you
  Satine

  The default collection file supplied with the plug-in is the basis of how the collection for the target type agent. If the user makes changes through the user interface, the agent record in a specific collection of target instance file that selectively replaces the default file in the collection.

  Data collection should be TARGET_METRIC_COLLECTIONS view of $ MGMT.

• created a new workspace, the user created OTN account but cannot access to workspace

  Hello
  
  I created recently GFW_SYSTEMS_TEAM beehiveonline workspace.
  
  I added 4 external users, including myself as an external user using my gmail account: [email protected] so I could check the process from the point of view of external users
  
  I created my account OTN and checked it but can't access the workspace by using this connection.
  When I check the users in beehiveonline-apex, I see that all users are verified.
  When I check the users in the workspace, 2 x external users are absent, but my gmail user is here
  When I check the ~ tool BOLADMIN I see that my gmail user is missing - just my oracle account is visible; the other 2 x external users are also missing.
  
  my oracle and gmail email addresses are similar: neil.pritchard@~ oracle.com, gmail.com
  I reached from my portable secondary oracle (OBI). not on the vpn
  
  can you tell me if there are known conflicts with the above configuration?
  
  more information:
  OPERATING SYSTEM: XP SP2; IE8 browser
  When you access the teamcollab or work spaces, I get "Internet Explorer cannot display the webpage" during the connection authentication
  
  
  Best regards
  Neil
  
  Published by: 972236 on November 20, 2012 05:49

  Neil,

  We spotted some configuration scripts that had failed and rerun them now - hoefully additional users will be soon in the group/workspace. The 2 emails to you will not be a shock, because they are valid and unique.

  Phil

• My icons on my desktop are frozen. I am new to the computer world. I am currently enrolled in a computer course, did some research and frozen sort my icons, can someone give me some advise how to erase it.

  As I said above, I'm new to the world of computing, and I'm currently enrolled in classes, well, my problem is that I got my frozen unconstitutional office. Could someone give me some advice on how to fix this error.  Thank you very much for your company.

  Hello

  If the system is blocked, you may have to restart. If necessary, you can restart in Mode safe
  by pressing repeatedly F8 as you boot/startup.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Corrupted images captured new 5 d Mark III

  Hello

  I had two images corrupted during the shoot with my new 5 d Mark III... I used 45mbps sandisk extreme SD card and the mode was only to JPEG (fine). After obtaining two corrupted images I shoot 1 k images but no problem after... Later, I copied these images in my HARD drive except two all corrupted images are looked nice... My question is what was the real problem? Thank you in advance...

  I would advise at least do a quick format in camera each time you insert a memory card (or just after download) If you use the USB cable to transfer your images.

  The format in camera prepares the memory card for use, configure it with certain structures of necessary files and writing about the old files.

  If you never format in the computer, always re - format in your camera before shooting. It is possible that the computer will not configure the card in a way that will work correctly in the camera.

  Usually corrupt images are due to map or connectivity problem when downloading. If you see corruption in the camera, so I suspect the card first (it is defective, it is misconfigured or something out there is the cause of a conflict).

  I damaged once a number of images on a Compact Flash opening memory card door and pulling the card too quickly, while the last image or both was still written. It damaged about 1/3 of the images on the card, not only the last of them taken. Initially all the images on the map were illegible, until I ran a recovery program. Who has been able to repair about 2/3 of the images to about 200 to 300 images, if I remember correctly.

  The issue of corruption worse than I had (in ten years digital shooting almost exclusively, nearly 20 years ago, some digital shooting), was because of connectivity issues. I had a card reader connected to a USB hub. He took off the hub and plugged directly into the USB port of the computer and the problem was solved.

  It is possible, but rare enough that the camera itself is causing occasional corrupted files. Usually the camera begins to shake the corrupted files, if most or all of the images... not just an occasional. I keep an eye on it and if it continues to happen, first try a different memory card. If it continues to happen with another card, the camera is looking at.

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• New to the forum

  Hello

  I'm new to the Forum and I would like to know how do I answer a question that is part of an answer to a question, I presented

  Click on the 'Reply' link at the bottom of the message you want to reply.  If you want the text of the message appear in your answer, click on the button "design - tender" instead.

  You can remove the material in the shaded box indicating the "quote" If you want to focus on only part of the message to which you are replying.  It is common to replace the parts removed from the material mentioned by the phrase [snip] or similar to indicate that something has been removed.

  Depending on which browser you use, you may not be able to type in the answer box that appears when you click 'Reply' or 'Quote' until you first click the text in the original message (don't ask why).

  If someone answers a question you raised, or that there are useful, it is courteous to you to acknowledge marking their post (not your own) as the answer, or giving their position a "useful vote".