New video card conflict?

I just installed a Zotec GT240 video card in my pc m7650n. It is one of the few my 300w power supply will support so I don't want to give up on this to guickly.

The problem is when I install my realtek sound devices 'missing '. I hear through my USB headset, but nothing in my speakers and no option to change the output device. I'm not showing any conflict in Control Panel. Try re-installing the drivers realtek just puts me a message that "microsoft UAA HD drivers must be present", even if they are already installed.

If I pull back video card it comes down real easily so I wonder if the audio has covered somehow on the integrated graphical subsystem. I'm not a great player, but I would like to be able to occasionally run the sims 3.

Any suggestions?

Hello

With the new video card installed, enter your bios menu (tap away at f1 or f10 when you start the PC - try f1 first).  Under the control of tab advanced which Onboard Audio is set to active.  If you need to make a change, press f10 and Yes to save the changes and see if that helped.

Best wishes

DP - K

Tags: HP Desktops

Similar Questions

  • New video card - no video

    Hi, I just bought one sucks tc - 105. My game performance was not satisfactory, and I tried upgrading the video card with something, I had to hang out. I installed it in the pcie slot hooked the monitor and start got no image. Tested the card on another machine, it still works. I was told, by a representative of acer, it's because the power supply could not handle the card. I bought a new power supply and a new video card. Installed both, still no picture. I thought that maybe there was a video conflict with the GPU "on edge". There is nothing in the bios on this subject. I don't know if it would be possible to remove it, but I don't know where find t. PC is brand new that he has had no time to get a defective pcie that according to me.

    I did some reading. It turns out that it was safe "boot mode" bios and options "launch the csm" necessary adjustments. New hardware is not recognized without the people.

  • 550-153w Pavilion: new video card

    Hello, I want to get the ram dedidcated to my graphic card of 256 and its 128 right now. Ive read in another post on the forum that it would be better to get another (goo.gl/Z4F0f1). I was wondering what would be the best video card to get for this need.

    @ShepardPotato, welcome to the forum.

    The problem that you have with the upgrade the video card is the power supply unit (PSU).  It's only 180W.  Most new video cards require a minimum of 400 w to work properly.  You should check to see if a stanard ATX PSU will enter in the space provided for the existing power supply.  If there is enough space, this power supply should work.  You should get this one measures of the plug.

    When you upgrade the PSU, here is a video card that will make what you need.  If you need more information, you should contact the manufacturer's Technical Support.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • New video card and memory for my laptop (1410-604)

    Hello

    I think of a new video card and an extra memory...
    What possibilities I have to upgrade my laptop (Satellite 1410-604).

    I checked my computer technical description:
    I think I can add an extra 256 MB SDRAM. But what video card?

    Koen

    Hello guys

    It s not possible to update the graphics card. You can't compare the desktop with a laptop PC. The graphics card on the laptop is a small chip that attaches to the motherboard.

    On the upgrade memory: you can upgrade the memory maximum. 512 MB (2x256MB). There are 2 slots available and these modules of memory are supported:
    PC2100 128 MB (PA3126U - 1 M 12)
    PC2100 256 MB (PA3127U - 1 M 25)

  • Computer does not start with the new video card

    Hello

    I have hp pavilion 500-277cb and I love it, but it won't work with my new video card

    The video card is
    Sapphire ATI over-pants 2460

    I heard 6 beeps and I turned off safe and active start legacy. It does not beep, but it is not start either, just black screen.

    It seems to me to have the latest version of the bios and windows 8

    What can I do else?

    Thank you very much

    Best,

    Korhan

    Hi JM,

    Did you remove the Intel HD graphics drivers prior to installing the ATI graphics card?

    Your PC comes with one of the following built-in Intel graphics drivers:

    • Graphics Intel HD 4400 (GT2)

  • Pavilion NC768AA #ABA: HP Pavilion model. a6719f new video card with the new power supply?

    Hello!

    So, I won money to buy (hopefully) a new video card!

    However, I have a problem.

    I don't know which one to get!

    SO, someone please, please recommend a video card for intermediate level games.

    (My budget is less than $280)

    My PC has stock everything.

    Thus, it was purchased as it was when you would get everything first he.

    Yes, I need also a new power supply that is included with my budget.

    Thank you!

    Revionion, welcome to the forum.

    I'd be happy to help you in your choice.  The main problem is, recent video cards require UEFI in the motherboard instead of a standard BIOS to legacy.  HP didn't start using UEFI until mid-October 2012.  The latest maps not requiring UEFI were the series GTX 640.  However, MSI has made a card that has a VBIOS hybrid which can operate with a BIOS.  The best thing to do is to choose a video card you like and contact Technical Support from the manufacturer to ensure that it will work on your computer as it is almost 7 years old.  This will save you problems.  They are the experts on their cards.

    I like Corsair power supply units (PSU).  I suggest at least 500W.  This will give you plenty of power for any card that works in your computer.

    If you have any other questions, let me know.  I'll be happy to help you.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Pavilion HPE 440F: need new video card for HPE-440F

    Salvation;

    The ATI Radeon HD 5570 in my Pavilion HPE 440F appears to be dead, or is doing. The fan has stopped working and I think the map has overheated.

    I'm running Windows 7 x 64.

    Anyway - I would like to install a new card - and best video. It is, since it is HP, I bet that not all cards are compatible with my system.

    For example, I can buy an ATI Radeon SR-290, which gets much higher than my current card pass mark. Or maybe even a NVidia card might be a better value for the money.

    Can someone point me to a list of compatible video cards for my system?

    Thank you

    Ubuntu_Kid

    p.s. My Linux box is not an HP.

    Ubuntu_Kid, welcome to the forum.

    The problem you are having is, most of the newer video cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on August 26, 2010.

    Some of the manufacturers have developed a VBIOS that will allow their cards to work with legacy BIOS.  I know that the EVGA has done with some of their cards.  I suggest to call their Tech Support (1888-880-3842) to see if they have a card that will work with your computer.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Pavilion Slimline s3120N will not recognize the new video card

    I can't get my computer to recognize and use a new video card. I tried 3 cards (GeForce 8400GS... cards 2different and Radeon HD 4550). The computer continues using the onboard video. For each card, I did the following:

    Go to configuration, advanced and changed the main graphics card 'on board' to 'PCI-E '.

    Saved and let the computer start.

    Stop and insert the new video card into the PCI-E slot

    Start the computer and installed the latest driver

    Computer restarts

    No matter what I do, it always uses the embedded video. I am running Windows 7 Home Premium. How can I use the PCI-E slot/video card? Any suggestions?

    I think that your problem may be the power supply unit (PSU).  The video card that you have installed require a minimum of 300W/350W.  The power supply of your computer is perhaps only 180W; 220W at the most.  You can check by opening the case and by reading the label on.  It's just too much difference for the card to function properly.

  • New video card kills her

    I decided to add a video card to my HP Pavilion a1640n (intel) computer Windows XP Media Center.  I'm not a gamer, so I chose a cheap express card ATI Radeon PCI with 256 MB of memory [PowerColor HD3450].  After deactivation of the graphics card integrated and the installation of the new video card and drivers, I had beautiful graphics but no sound.   [Physical connections seemed good as well as the volume of my computer settings is not on mute;]  When I removed the video card and re-activated the integrated graphic card, my returned his computer.

    What can I do to try to get the sound works with a new graphics card?

    Thank you.

    Try going into the BIOS and under change Onboard Sound it self to "Enabled".

    I heard that it suits it.

  • Install the new video card

    I have a HP Pavilion m7500y PC running Windows XP. I would like to install a new video card to display on both monitors. Installing a video card is possible with this machine? The card I have has a VGA, HDMI and a DVI input connection. If possible, do I need anything special to install and use this card? Thank you for your help.

    I wouldn't worry the food until the video card is selected.  Decide if a new power supply is needed.  Many new cards high power have a 'special' which will have all the power supplies.  According to the map, adapters for power fittings may come with the card.  A respected power supply name is Cosair, Antec, or Thermalake, but many are just as reliable at the best prices.

  • 310 - 1125y in expansion with the new video card?

    I have a HP all-in-one TouchSmart 310-1125y and would like to know if this PC support the installation of a new video card.  It comes with an integrated ATI Radeon HD 4270 support.  I did some research and have the impression that this PC is not particularly expansive.  Thanks in advance for your help.

    Here are the specifications of your desktop HP TouchSmart 310-1125y and its custom Quanta DA0NZ2MB6A0 (HP Aronia) motherboard. According to the specifications, there is no provision for the installation of a new video graphics card.

    Frank

  • New video card.

    Hello

    I have a desktop HP pavilion p6-2106 and I want a new video card, so I can play some of the games of "new".

    It doesn't have to be so I can't play evry thing on max settings but just low/medium with a decent pace so I'm looking for a decent videocard with a good price but I don't really know what is compatible with my PC.

    here is a link to the plug.

    hope someone knows a good map of video for a good price.

    Hello

    Try one of the video cards below.

    MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF if cards are not available at Newegg then try Amazon or Tiger Direct. Be sure to get the exact model.

    You won't have to replace your power supply.

  • User does not appear in the XP start window after installing new video card and the extra memory. This option is to turn off count... safe mode does not help.

    Additional memory added, installed the new video card...
    Reboot a windows XP user name screen. any user identified.

    Can you achieve Alt + Ctrl + delete twice and connect with the classic login?

    -JW
  • Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.

    Hello

    I recently rebooted my computer; (Packard Bell) and now cannot run games or screen savers because it does not start. I think my problem has something to do with a Direct3D card? When I run screensavers, I get this message:
    Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.
    I have the impression that sound when I run the 3D games, such as minecraft or GMOD.
    I run on Windows Vista Edition Home Premium and does not do anything but re - install my computer because it wouldn't start.
    It is not as if the graphics card is not there, so I'm really confused!
    Please help me, like playing games is my favorite thing. ;)
    Charlie
    I also ran minecraft to double check and I got this error code:
    Bad video card drivers!
    -----------------------
    Minecraft could not start because it did not find an accelerated OpenGL mode.
    Generally, this can be corrected by updating the video card drivers.
    -BEGIN 7fe0271 error REPORT-
    Generated 10/10/12 21:04
    -Minecraft Version: 1.3.2
    -Operating system: Windows Vista (x 86) version 6.0
    -Java Version: 1.7.0_07, Oracle Corporation
    -Version Java VM: Java hotspot Client VM (mixed mode), Oracle Corporation
    -Memory: 422585352 bytes (403 MB) / 518979584 bytes (494 MB) up to 1037959168 bytes (989 MB)
    -JVM Flags: 2 total; Xms512m-Xmx1024m
    -LWJGL: 2.4.2
    -OpenGL: ~ ERROR ~ NullPointerException: null
    -Is Modded: Probably not
    -Type: customer
    -Texture Pack: ~ ERROR ~ NullPointerException: null
    -Position profile: N/A (disabled) [can't get system (java.lang.NullPointerException) properties]
    org.lwjgl.LWJGLException: Pixel format not accelerated
    at org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat (Native Method)
    at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52)
    at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:185)
    at org.lwjgl.opengl.Display.createWindow(Display.java:311)
    at org.lwjgl.opengl.Display.create(Display.java:856)
    at org.lwjgl.opengl.Display.create(Display.java:784)
    at org.lwjgl.opengl.Display.create(Display.java:765)
    at net.minecraft.client.Minecraft.a(SourceFile:233)
    at net.minecraft.client.Minecraft.run(SourceFile:516)
    at java.lang.Thread.run (unknown Source)
    -REPORT of ERROR END bb61788b-

    Hello

    After you reinstall the operating system, you should also go to the website of your computer manufacturer > drivers download section > put your computer model number > search for your operating system and drivers (graphics, audio, etc.) > download and install.

    See you soon.

  • Vista screensaver stopped working because it requires a newer video card or Direct 3D compatibility

    Windows Vista Professional Home: The resolution changed by itself, when I restored it to the original setting, the screen saver stopped working because it requires a newer video card or compatibility with Direct 3D. Nothing has changed on my system over the past two years, and everything worked well. That's happened? Why I get this message? Thanks LS

    Thanks for the reply.

    Based on your response, it seems that the display driver has been corrupted by a reason, then I suggest you to install the latest display driver. Even if you do not use Direct 3D I recommended to leave the computer updated with the latest drivers that are released by the manufacturer of the computer so that it can run Windows features correctly.

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • phone will not be displayed

    When I connect my phone to my computer it appears, but it will not be displayed on itunes. I restarted my two devices, reinstalled itunes and still it will not be displayed.

  • Satellite P50T - Was: need VAP for Win 7 32 bit

    When I try to download the 32-bit version of added value package for the Satellite P50T-A (Windows 7)Download linkThe downloaded file ishttp://Support1.toshiba-tro.de/Tedd-files2/0/VAP-20130916115251.zipWhat in fact is the 64-bit version! (I checked,

  • Updated 10.11.4 (15E65) Mac slow as molasses

    I just did the update 10.11.4 (15E65) and now my Macbook is extremely slow. There is nothing open which isn't normally open when I use the computer. I looked at what could be hogging CPU or memory and there is nothing that stands out. I restarted the

  • Pointer jumps on Portege series

    While typing wrong place on Open office or hotmail it words are in gmail tr my pointer jumps suddenly then when I look to the top of sections of t Which should have read "while typing on Open office or hotmail or gmail my pointer jumping abruptly as

  • Windows Vista backup and restore: no path to write the disc label

    Original title: Back-up-Windows Vista Automatic backup on windows vista provides a label to write on the dvd in the external disk drive. There is no pop-up window to indicate where to write that the label - so fails it AutoSave. When I insert a blank