New Vrtx with blades M630 - Shared Perc 8 driver does not start

We have a new (shipped this summer) Vrtx with blades M630.

After installing the initial OS (windows 2012 datacenter R2), were only two devices that have no driver installed - they were two raid controllers. The BONE was deployed via the lifecycle controller running the last package.

After doing the updates of windows, both these raid controllers have been updated to 'Shared Perc 8 '.

After the release of the pilot, the 8 "shared" perc has a driver 15/03/2013 6.801.5.0 pointing to windows\system32\drivers\percsas2.sys.

The driver has an error saying it cannot start (code 10). A card i/o hardware error has occurred.

I saw that you must obtain a driver for "shared perc 8 ' Dell. But I can't find this driver anywhere.

Does anyone know where to get a newer driver for this controller?

Any help will be appreciated.

AJ

Journal of Angie,

The pilot Windows 2012 I think you need is located here. Let me know how it goes and if it resolves after the update.

Tags: Dell Servers

Similar Questions

  • I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

    I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

    Hello

    And much more: (XP mode requires professional, Ultimate or Enterprise).

    Get all the benefits of Windows 7 and continue to take advantage of your investments and more
    business and productivity programs that require a PC running Windows XP.

    Note: Windows XP Mode requires a download.
    http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

    Windows XP mode
    http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

    Windows XP Mode is supported through Technet

    TechNet - Forums - Windows 7 virtualization
    http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • After the new HARD drive does not start installation Qosmio G15

    I just got this G15 last week and one of the hard drives was bad. Put it in a new Bay 2 and it does not start. I took it back and it starts fine. I even changed the main hard drive Bay 2 HD and it starts up fine with a hard drive. It's something to do with the scores, I think. Any help appreciated.

    Hello
    I think that the boot order has been the bad HARD drive in the BIOS.
    At the new disk you do not installed any OS, and in my opinion, this is a reason for starting problems.
    Simply access the BIOS and change the boot order

  • New hard drive does not start

    I have a T61 with XP on it. The factory hard drive was beginning to show its age, so I got a 500GB WD Black drive for her. I used Acronis True Image to clone the old hard drive to the new. I used my counter top to do the cloning. When I plug the new disk in, the cursor just blinks and it will not start.

    I thought that maybe the clone was bad, so I put the new drive hard back at the top of my desk and is able to boot all the way to the windows start screen. If I plug the old drive in the laptop, it starts very well, simply refuses to boot from the new drive.

    Guessed it.

    Put the new hard drive into the computer, put the old hard drive in a USB enclosure and done a CD boot Acronis, and made the clone of the laptop. Runs like a champ and now flies.

  • I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

    Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

    Thank you;

    Lobo77

    If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

    Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

    The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

    Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

    There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

    Ultimate Boot CD 4 Windows
    Ultimate Boot CD
    Hiren BootCD

    If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

    If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

  • Print screen button (with or without the key Fn is) does not start the process?

    Print screen (with or without Fn key) key does not start any process?

    The PrintScreen key is misnamed.  It copies the screen to the Clipboard, so you can paste the image into Paint or other graphics application.

    It has nothing to do with printing [and did not over fifteen years].

    See this thread for some additional useful information - How to use Print Screen on Win7 & where will the image

  • New NB200 with Windows 7 preinstalled Fn shortcuts keyboard does not work

    I just purchase the NB200 later with Windows 7 preinstalled (new version with 250 GB hard drive).
    However the Fn keys do not work.

    The machine is straight out of the box, no change.

    I have to do something to activate the access keys.

    I've heard Hotkey problems with windows 7 and the need to install that package added value of Toshiba.
    However I don't is not expected to have to do this on a brand new machine pre-installed.

    Any help very much appreciated.

    Thank you

    You are right. New portable computers are delivered with the settings and everything should work fine.
    I don't have Win7 on my laptop but I presume that it is similar to Vista, then go to start > all programs > Toshiba > utilities and check if there are shortcuts to restart Flash cards.
    Maybe you'll be able to turn it on again.

    Nothing happens when you press the FN key and hold a few seconds?

  • I installed photoshop CS4 on a new PC with the original CD. Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target". Thanks for your help!

    I installed photoshop CS4 on a new PC with the original CD.

    Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target".

    Thanks for your help!

    As you can see, you are using version 5.0, who can't stand still not instant in it.

    Please check for updates in Photoshop > help.

    Concerning

    Sarika

  • BlackBerry 8800 Smartphone, symbol of the battery with a red line through it. Does not start. Help, please!

    I recently bought a 8800 and when I inserted a battery, I got was a battery symbol with a red line through it, on a dark screen.  I changed the batteries, tried to charge it via the USB port and a wall outlet without result.  I tried cleaning the contacts and tried to download t a new OS, but it does not recognize the phone when it is in reality.    I am at the end of my rope with this phone and can't figure out what else to do.  It is just gone? Please help me

    Clipboard?

    You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

    http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

    If JL_Cmder does not work, follow this instruction:
    http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

    It might not work. You should try a connection with JLCmder 20 to 25 times, as well with the battery and the battery.

    See what's happening.

  • Help with VMware Fusion... VM does not start... Please :)

    My vmware fusion vm will not start. I get an error message:

    File "/ users/user/Documents/Virtual Machines.localized/Windows7.vmwarevm/Windows 7.vmx" line 1: syntax error.

    I have attached the newspapers and the generosity and skill vmx file to help a nice person. Thank you!

    Greg

    The attached file "Windows_7.vmx.zip" contains a new 'Windows 7.vmx' file created from the supplied vmware.log file.

    With VMware Fusion closed unzip (double-click on) attached file "Windows_7.vmx.zip" and replace the file "Windows 7.vmx" original by one here.

  • G62: New hard drive does not start after recovery.

    I installed a new hard drive after my old a bi dust.

    I ran the recovery from the discs of HP.

    After formatting the disk and copy files, it won't boot from the disk.

    I changed the boot order and tested the drive in the BIOS.

    What Miss me?

    The new hard drive sometimes requires to prepare first with utility cd from Cyberlink. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.

    http://FTP.HP.com/pub/softlib/software11/COL32372/ pv-80183-1/sp44645.exe

  • What to do with my computer laptop windows vista which does not start? He gets a screen before before her windows error recovery screen restarts.

    Tittle says it all, I tried safe mode and the rest of them, but I can't start

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Reinstallation of Windows XP Home Edition (new hard drive) does not start properly, please help

    I have a HP Pavilion zd7000 that bad on the hard drive. I bought another and used the reinstallation disc to reinstall Windows Home Edition.  Everything seemed to go well, but it starts now to a HP Invent logo black screen that says press F10 to go together to the top and F12 at startup of Lan.  Then, a second black screen appears that says press F1 to resume or F10 Setup.  I press F1 and Windows loads very well.  What can I do to have Windows load immediately without going through this?  Any help will be greatly appreciated!  Thank you much in advance!

    EverWin... IT WORKED! I can't THANK YOU enough!  I've been to every site I could find... begging someone to help me.  Audit throughout the day (for a week) to see if someone had answered... tried everything!  I'm so happy (and tired) I could just cry.  I can't believe that you took the time to help me... I appreciate it very much!

    God bless you!

  • How to create a bootable Windows Vista USB drive? I can't install Windows Vista with a disk because my dvd drive does not work.

    I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do

    Please send your reply to my email id, or post it here...

    Hello

    Vista is not designed to be installed like this.

    But others led to ways to do so.

    This may interest you on this subject:

    "How to create a USB of Vista Installation key '

    http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

    Google will help you in this matter.

     

    See you soon.

  • DV9000 new hard drive does not start

    DV9000 had smart hd HD replace failure did it, now, it will not boot from the cd to retrieve records. All I get is the operating system not found. Help, please

    OK... after a lot of trial and error. This works.
    ISO created from files that I found on the Internet for vista Home premium 64-bit
    Then used wintoflash to make the stick bootable flash... fail. tried again a portable my passport HD success!. Will boot from the external drive but not a flash player.

Maybe you are looking for

  • Is there a way to Downgrade to IOS 9.3.4 iOS 9.3.3 after IOS 9.3.5

    I had an IPhone 5s until what he stole. SO I tried save money and bought a 5 s IPhone on eBay. When I received the IPhone there is a note saying the the current version (9.3.4) was broken on the phone. I studied for me and found that the phone was no

  • I have a lot of documents and data use on my iPhone 6 iOS. 9.1.2.

    I have an Iphone 6 and at the moment my use of documents and the date is much (2.1 GB) or even hard I've just reset it. Does anyone recognize this problem? Before I reset my use of data and documents has been about 5 gigabytes.

  • new Gfx card number double Y500

    Hello I just got my new Y500 with nvidia gt750m. I also ordered gfx card to work in sli with which is 650 m. I asked the tech if these cards will work in sli and he said that they work perfectly. I also ordered large extra food with her. Now, when I

  • Linksys Easy Link Advisor

    I installed the Advisor and now tried to put my paper inside had error MSG 100 000 000 what to do?

  • Deleting a media file

    After I save on my computer, I downloaded a media file with .flv extention, I couldn't play, I couldn't not delet it and I wouldn't even rename it.