New W510, update the BIOS - black screen on startup - guaranteed?

Similar Questions

• Satellite A200 (PSAE0C-AH308C) - after the BIOS black screen update

  Hello

  I have a Toshiba Satellite (model No. A200; Part No. PSAE0C - AH308C) and to install Windows XP on a version already corrupted Vista (which had 4 partitions, that have been corrected, erased, then reformatted in a solid block). Now, I have installed all the appropriate drivers off Toshiba Canada support site...

  Everything worked, but I wanted to see in Windows (since I just got this computer) if everything was in place and working normally until I installed Ubuntu... Then I did the update to the BIOS flash. The program is supported in two formats, one for Vista and one for XP... for XP has a more high at 5.20 and Vista BIOS version the 1.80 revision of BIOS... that are marked as being updated by the Toshiba site. I opted to download the latest version of the BIOS.

  Things got ugly as soon as I unzipped the self-extracting program. First of all he said he could not find a .dll file (even if it is clear from there), so that seemed as if it started to Flash the BIOS but has not finished (it was just what happened when I opened the program)... I think he got to the ROM of compensation but did not have any code in there... Windows attempted to close the program because he did not respond, and I tried to take the program... had the same .dll error, but this time, the screen of the program was just gray...

  Given that this program is not Flash the BIOS unless the user selects the button "Flash BIOS", I have reason to believe that it was a bug in the program, or a combination of it and Windows comes to interfere (no program were running at the time, while he was supposed to be a dedicated flash). I can only flash in the Win.

  Now, I rebooted the computer, twice... the screen turns black, the HARD disc spins, the DVD drive has done his usual clicking sound when the computer starts, but it seems to stop as there is no BIOS entact.

  Can I replace the BIOS chip? There is no way for me to access the BIOS at all.

  Thanks for any help on this

  Thank you & best regards

  Muhammad Asif
  Manager

  THE COMPUTER HUT

  Center of the screen:
  F-115 trade place treat Saddar Karachi.
  Branch:
  G-31 place of trade treat Saddar Karachi.
  Headquarters:
  711-712 treat Trade Square Saddar Karachi.

  Tel: (+ 92-21) 2765359, 2734131 (Ext) 601
  Fax: (+ 92-21) 2724968
  Cell: + 92346-3277193
  E-mail: [email protected]

  Hello

  Unfortunately, the BIOS update has failed and now BIOS is damaged. For this reason, you cannot start and use your laptop. I agree with Luke. Please contact nearest Toshiba authorized maintainer and ask for help. Talk with them and I am sure that you will find the best solution to this problem.

  Satellite A200 is quite long on the market and it is hard to believe that updating the BIOS on the Canadian page may have a bug. All updates are tested and used by millions of users and service providers. If there is something wrong, I do not believe that this update will be available on the page of public support.

  In any case, contact the nearest service provider and explain the situation. Believe me this is the best thing you can do now.

  Good luck!

• 15 - d017: d017-15 update BIOS black screen at startup, Win + B keys do not help... How to unbrick?

  I try to get my 15-d017cl to start after upgrading the bios, here's what happened:

  -SSD installed to replace lack of hard drive, computer was working fine but disk was bad sectors (checked at default computer w/2nd hdd)

  -enabled Legacy support in the BIOS, so I could install w7 Pro 64-bit

  -installed w7 Pro 64 bit, no problems, started in Windows, everything works as expected

  -installed the Audio driver from the HP site for this 15-d017cl

  -site upgrade BIOS from HP for 15-d017cl, program says BIOS flash 100% then hung

  -After about 10 minutes, I repowered the black screen of the machine

  -start by pressing F10 key poster standard white text on the screen 'F10 '.... Configuration of the BIOS options, but it crashes it

  -start while now pressed the keys Win + B with or without a USB key (which has a different BIOS update) just hangs

  How do I unbrick my machine?

  I tried to download the 1.5 GB for a USB key that restores the BIOS update, but the download stops after 130-160 MB, I tried 6 times. Is HP corking downloads from their FTP server?

  Help! Any ideas will be appreciated.

  My model supports the Win + B keys to cancel the BIOS update?

  Y at - it another site where I can d/l the USB tool to roll back the update of the BIOS?

  Help!

  Hi mscir,.

  You make the W + B bad smell!

  First thing, it's that you need to load the BIOS DEFAULT settings

  You turn the computer off (if its currently turned off the coast)

  Turn it back on, then press the ESC far away so that you can access the START MENU

  Press F10, press F9 and then press F10 to save the changes and then press on enter if you are prompted.

  If the fix above does not solve your problem, then perform emergency Bios dump

  Many computers of portable HP have a BIOS for emergency recovery feature that allows to retrieve and install the latest well-known version of the BIOS from the hard drive, as long as the hard drive remains functional. This emergency recovery feature is separated from the BIOS and is designed to operate in the event of a catastrophic failure of the BIOS.

• Changes settings of the BIOS - black screen boot. [TravelMate P453-M]

  Laptop still under warranty.

  I recently had a motherboard and replace the HARD drive.

  I wanted to install Windows Me, but the BIOS has been defined in the UEFI, and I couldn't start on a USB key.

  So I turned on the heritage, booted from the USB and installed Windows very well.

  For some stupid reason, I went back to try to change the setting in the UEFI.

  Now the laptop turns on, but won't start. I get a black screen, no logo or any what guest to access the BIOS.

  I read a little and seems that I have to remove the BIOS battery, let the memory itself to reset the default BIOS settings and try again clear?

  If it's important, I re-installed Windows 7 64 bit.

  Any help would be appreciated!

  Ah, I've solved the problem! Created a boot UEFI active USB key with a GPT partition, using the software of Rufus. And it started from it very well.

  Thank you, my Lord and Savior Google.

• T420s BIOS update failed. Black screen

  Hi all

  I tried updating the BIOS with the tool provided by lenovo Web site. He failed, and at the next reboot, my laptop remains in a black screen. I tried the tool wincrisis without success. Maybe I am doing something wrong because others say use fn + r other fn + b... I'm not sure.

  Suggestions to save myself before calling lenovo Monday?

  Warranty covers this case?

  you need a new motherboard, it will cover the warranty.

• G72-a20EM screen has stopped working after updating the BIOS F.48.

  How is it possible that BIOS update recommended could turn off the LCD screen.

  Currently I see almost anything on the screen, but vga port works. But increasingly,.

  Intel graphics card is not recognized.

  G72-a20EM screen has stopped working after updating the BIOS F.48.

  What can I do to fix that?

  Good news!

  I found the working version, and it is version F.08.

  Supposedly new version have different Active cables, and this is the reason why the screen is dark.

  So, case closed, everything is perfect.

• Yet WT8 - after that updating the BIOS 1.6 screen is too bright

  After the update the BIOS to version 1.6, as even the lowest setting of the screen is bright when using the device in a dark environment (e.g. reading in bed). Before the update, I simply set the brightness slider Windows at the lowest level and everything was fine but now it is so brilliant that he hurt the eyes.

  Anyone else with this problem? Is there a solution?

  * Brightness * level is a function of * EC version * (on-board controller).

  There are variants _Two in units shipped: __

  THIS 1.10 + and +-bios 1.20
  THIS 1.20 + and +-bios 1.20

  _After bios upgrade: _

  THIS 1.20 + and +-bios 1.60

  EC 1.10 was 1.20 lower brightness level, 1.10 is so much better in the dark situation, * ask * Toshiba * Europe * to solve this problem.

• Update the BIOS Tecra M11 - 11L: to get power on display on two screens?

  Y at - it a BIOS update that lets me select "BOTH" as an option for the power on the screen?
  Currently, it lists only internal and automatic selection.

  Automatic selection outputs only to the external screen if it is connected.
  I need set the default output on both screens.

  Older Toshibas to this. In fact, all other Toshiba I used has this feature.
  Like a laptop rental/presentation/Conference, this is an important feature.

  And Yes, I've updated the BIOS with the latest version.

  Thank you

  Ben

  > Self-select out only on the external screen if it is connected.
  > I need set the default output on both screens.

  No, it doesn't have this BIOS update that would add this option.

• Tecra A2: brightness F6 Fn + F7 does not work after updating the BIOS of the screen

  Update bios to 1.40 VICTORY at end of January. Since the failure of keys F6 & F7 then to increase or decrease the brightness of the screen. Is it a coincidence or is that updating the bios the culprit! ??

  Hello

  Usually, the update of the BIOS shouldn't have a bad influence on the drivers of Toshiba and the performance of the operating system.
  There must be another reason the FN key down.

  Initially, I would say to reinstall the common modules. Please check if this will help.

• Blue screen stop error 0x0000007e (etc.) updated the bios?

  My copy of Windows XP pro does not start at the login screen, I get a stop error 0x0000007e (0xc000005, 0x805d625b, 0xb84c34f0, 0xb84c31ec)

  I looked at these stop error numbers and, since there are a lot of hard disk space, try update BIOS.  The instructions on the Microsoft Web site stop at 'Contact your manufacturer.'  The Dell BIOS update, I downloaded is an .exe file, but the instructions I found are all for a .iso file.

  How do I boot from CD to update the BIOS without this kind of file name or how to update the bios in this form?

  Is there something else I should do if the BIOS update will not work?

  Thanks in advance

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Unknow new device after the bios update and to install win 7 pro to the T400

  Hi all!

  My laptop: T400 2767-2JU. After the most recent update of the bios version (3.09) and own to install all the drivers in the Lenovo Site, I found an unknown device: Simple PCI communications controller. I don't think it's Thinkpad Modem, because, before updating the bios, the system does not have it.

  Please see my picture of capture: http://i92.photobucket.com/albums/l39/hoangnhat1613/T400-UnKnowDevice.jpg

  Someone help

  PS: Sorry for my English . Where to post the link to the image? All the drivers are installed

  I've seen it suggested that this (lists of mine such as serial Port PCI) device is Intel AMT / series on local network service.  Not useful for users and some utilities normally hides.

  Hardware ID Ven_8086 & DEV2A47

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T500-Intel-driver-missing/TD-p/102526;jsess...

• Split 13 x 2 can't update the bios

  I have a new split of HP 13 X 2 computer laptop / tablet. I have upgraded to Windows 8.1. Tried to update the system BIOS but it fails. I have Kaspersky Anti-virus turn off when you run the update and my account is Administrator status. Evry time I try and update the bios, I get an error "failure" and said copy update has failed. What should I do to fix this?

  Just flashed manually with a USB key. Appears the utility tries to copy the update to the bios on hp/efi/bios on partition 2, but I can't find how to go from Windows, even with hidden folders to display. The update tool the wish was easier and you can specify where you put the update from version 'dumbed down too low to be useful.

  Steps to Flash manually:

  1 use the bios tool to copy the files to a recovery USB drive. It will create a Hewlett-Packard folder. In BIOS and the BIOS update, but the update f19 falls within the bios/current.

  2. with your PSU AC plugged, reboot the computer. Once the screen goes black, start hitting ESC.

  3. even if it seems you can arrow down and press ENTER to select F2, press the F2 key... without the function key.

  4. Insert the USB key, select the firmware, bios update, select the usb drive and navigate to the folder of the bios/current.

  5. you will be asked if you want to update the current bios of 16 to 19. Click bios update (forget what it actually says) and sit down and let it do its thing.

  6. restart. If you have enabled as I do of bitlocker, now you must pick up the keys. After that is done, then you have a F19 X 2.

  Have not used enough to see if 19 solves this problem of the touchpad, but refuse to do workaround above.

• Satellite A100 - 803 (PSAANE) - Trouble updating the BIOS in Vista

  Hello

  I tried to update the BIOS on my laptop today. After the installation of the new BIOS, restarted the pc and then it showed a black screen with white display text material in the machine.

  In the end, it says something about a corrupt CMOS. She said press F1 to default or F2 for Setup.

  I pressed F1.

  The thing is that I don't know if it worked. I used a program to display the bios version and it seems up to date, but the CMOS thing me freaked out.

  I met all of the planned maneuvers (AC adapter / CC plugged etc.) except in startup mode. I assumed that the boot mode is currently in the standard vista desktop.

  * What is this thing of startup mode? * It's driving me crazy. I searched the forums, google and nothing. How can I get the computer to "boot mode and not recovery mode" as the tutorial says.

  I intend to reinstall the BIOS as soon as I know how to enter in the boot mode.

  I think that this announcement has already answered in this thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=122727#122727

  You're talking about the traditional BIOS update, but the fact is that on the Toshiba driver page you will find ONLY the base BIOS update windows.
  All new BIOS updates are versions of WIN and can be updated only running a Windows operating system.

  In the BIOS, the package should be unzipped everything first, and then an .exe file must be run.

  That s all ;)

• Envy Touchsmart Windows 8.1 update 15-j05cl - black screen

  Have a HP Touchsmart, envy 15-j057cl. I can't upgrade to Windows 8.1. I did the following:

  1 installed all windows updates.

  2 went to HP support for machine page and installed all the drivers.

  3. don't run Windows - no problem identified compatibility Manager.

  4 deleted Norton preinstaled. No antivirus software is enabled.

  5. attempt to update the Windows store.

  6. black screen.

  Back in Windows 8. Windows has reported various attempts through error messages, including:

  0xc1900101 - 0x3000D

  Then-

  1. drivers for bluetooth and Ralink wifi disabled

  2 attempt 8.1 windows update of windows store

  3 black Screen

  Back in windows 8

  I tried very hard to make sure I've gotten all the latest drivers and BIOS, including the chipset drivers. I have not installed any other software. I also disabled any driver that I can not have everything while the update fails.

  I need to get back to work. Any thoughts?

  Thank you...

  The saga continued, but it had a happy ending.

  On the advice of the HP support, I uninstalled the driver Intel HD, booted safe mode and then tried the Windows 8.1 update. This time the update completed, but he returned to the black screen when I tried to install version 8.1 of Intel HD display driver. At this time, of course, it wasn't able to go back to Windows 8.0, so I had to completely reinstall the operating system from scratch. Good thing, I had all my saved data.

  After this experience, I gave up for a while, but he contacted the HP support to express my displeasure.  I went to a case manager, who contacted me the HP SmartFriend support.

  Today, we did an update of the BIOS. This new version of the BIOS F.53, just released on March 10, 2014 (after I had made my last attempt to make the update). After updating the BIOS, I have successfully completed update 8.1 Win. I then checked to make sure I had the latest version of the Intel HD Display Adapter driver and I did. Actually, the pilot that is displayed on the page for the driver for my machine was older than the version I have installed. So far so good.

  It seems that the solution to the problem was for HP to do a BIOS update.

• Updating the BIOS is dead the satellite Pro P300-1AY

  Hi all

  found this forum and really hoping that he can help me!
  I bought a satellite Pro P300-1AY two years ago, it cost me £900 nr so I thought it would be worthy of a purchase.

  A year ago the USBs stopped working, I do it every working solution I could think of anything will do, finally gave up and learned to live without USBs!

  However, a few weeks ago, the laptop at the start stop, I didn't get was the black screen. Probably a video problem I did all the memory check hard drive everything else, however, it was only an intermittent problem, I found if I he tilted on the side she would begin, another thing to live with!

  But two days ago, I heard that if I've updated the BIOS, it could solve all my problems. so I went to the Toshiba site, found the BIOS updated and downloaded, but to halfway through the installation, the laptop froze and I couldn't t he put it off and had to take the battery out to turn it off!

  And ve you may have guessed, he's now won t start. Even its worst, LED lights, and if I put a disc in the cd I can hear it whirring, but that s it.

  Is - this irreparable? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?
  Ty for your time in reading :)

  Hello

  > Is it irretrievably? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?

  Well, usually the BIOS could once again be reflashed, but you would need a traditional version of the BIOS update.
  This version is available for Toshiba FSA.

  So you will need to get in touch with a local ASP technician that could reflash the Rom BIOS module.
  Eventually, after this update the specifications would be stable.

  Good luck