New Windows 7 install OptiPlex 745

Hello

I have loaded win 7 pro 64-bit on my 745. Has made the custom which wiped the disc. The load has frozen several times but managed to raise and go through the settings. I have 2 GB of memory. No additional card plugged everything flowing from the motherboard. He comes to the desk top and the video is very good until I have try to go to all programs, and then it flashes different colors and does not return.

Works well with xp runs all day, as well in Windows 7 safe mode. Think not this is a problem of connection or a monitor. I have no restore points, it could be a driver problem and if so could you give me a starting point.

Thanks Mike

Advertisement

Dell does not support Win 7 on the 745, so you'll have to dig for the drivers.

Dell 64-bit Vista drivers can -or not - work with Win 7 64 bit.

See if you can find a Win 7 64 bit driver for the right Intel chipset and Intel Q963\Q965\G965 graphics controller on the Intel download site.

If you also want to install a video card, you will need to go to the site for any video card you have (for example, AMD) and look for a Win 7 64 bit driver for this specific card.

You can download the drivers on any PC and transfer on the 745 desktop and install mode without failure. Then restart normally.

Tags: Dell Desktop

Similar Questions

  • New processors for Dell Optiplex 745?

    Hi, I have a mini Dell Optiplex 745 desktop computer and was looking to upgrade my processor.

    What options are there for me? I was hoping to upgrade to an Intel Core i5 processor.

    The motherboard is as follows:

    Board: Dell Inc. 0GX297
    Serial number: CN6986174I20AF.
    The bus clock: 800 MHz
    BIOS: Dell Inc. 2.2.0 03/29/2007

    Yes, you can use Core 2 Quad Q6600 or Q6700. You cannot use Q8xxx/Q9xxx.

    Also, the faster supported non-Extreme dual core is Core 2 Duo E6700.

  • New Windows 10 install fails with error 0xC0000005

    I'm trying to install 10 Windows on a new iMac internal end 2015 5 K 27 "screen with a Fustion disc.

    I downloaded the file 10 ISO of Windows 64 bit. Then I started Bootcamp and pointed to the iso standard.

    Bootcamp created the partition, BOOTCAMP and the OSXRESERVED one where installation files live I think.

    He started the Windows Installer, which confirmed the U.S. ENGLISH install, partition BOOTCAMP to be formatted in NTFS and accepted the product key. As soon as he started copying the files, however, it immediately stop with error 0XC000005, which seems to be an error reading on the media.

    Don't know what to do to work around the problem.

    Can you post the MD5sum/SHA1 of the ISO W10? What is the size of the ISO file?

  • New Windows XP install devices Causes to stop working

    Hello

    I just reinstalled Windows XP on and old PC and many devices do not have the drivers

    In the computer peripherals Manager wrote

    - ?  Other devices

    ? Ethernet controller

    ? Multimedia Audio Controller (when I install the drivers for it says that I need to install the Microsoft BUS Drivers)

    ? Network controller

    This is a new Installation, and it is a Fujitsu Siemens AMILO Pro V8210

    Windows XP Service Pack 2

    PLEASE HELP ME WITH THESE DRIVERS!

    Thank you G_109

    I know why you're so boredom get the drivers to work. You mentioned that it was a fresh install of your OS and I remembered a thread that I helped at the earliest when a "launch manager" was neede to get ethernet controller to work.

    Read more:

    http://www.Vistax64.com/network-sharing/164443-Atheros-AR5007EG-problems-Vista-32bit.html

    previous forum thread:

    http://www.Vistax64.com/network-sharing/164443-Atheros-AR5007EG-problems-Vista-32bit.html

    Fujitsu Forum

    http://Forum.TS.Fujitsu.com/forum/viewforum.php?f=88

    I know that the thread refers to vista, but I think that when you reinstalled your operating system you have removed some required software to launch your ethernet driver. I hope this helps.

  • New Windows 7 install on D630

    Hello

    Have a few questions I hope you people can help me with that.

    Recently taken over a Latitude D630 Dell had no HD - was going to install Win Vista Business (COA) with Digital River .iso & actually burned on a DVD as well as the file .iso image (serious on CD) for the specific drivers on this laptop's service tag.

    Well, I now have a Windows 7 Home Premium OEM disc.  I wasn't sure if this machine would go Win 7 but it loaded perfectly & we are up & running on windows drivers generic.  Here's the info from the machine:

    Processor, T7300, 2.0, 4 MB, Core Merom, E1 and 2 GB of RAM installed.  BIOS = A13

    OK now I'm back to the clean installation of Win 7 in which case the pilots & have a few concerns:

    -first tried to let Dell analyse the system & see if she would suggest drivers.  Was told that it was not able to do.

    (1) I see a score =Note for several new systems enter a series number led a set wrong and/or incomplete of the drivers in the system. Does this mean that I can't use the created driver CD to install Vista & go through the list of drivers 65 years or so for D630 (no service tag) & decide which are valid?

    Edit: find a number of driver downloads list D630 service non-specific tag that apply to this machine.  So the #1 question is answered.

    (2) in the service tag-specific triggers only A17 BIOS is listed.  In all of the D630 drivers there is also the A18 BIOS?   I only install A17 or jump right to A18?  A18 seems very important & docks the next question on the video driver.

    A18 = Intel GM965 graphics video BIOS version 1588, NVIDIA Quadro NVS 135 M Video BIOS version 60.86.68.00.16

    Edit: Wonder if I should install the chipset driver before anything else.

    (3) obtain a flag to a video card driver.  Found a thread that indicated the driver Intel R180864 must be installed in Windows Vista compatibility mode.  This driver does appear in all files for Latitude D630, does not appear in the specific drivers for this service tag.  It would be the Quadro NVS 135 M.  Then only install the nVidia Quadro in compatibility mode?

     

    (4) Bluetooth (if applicable) - under the network. For systems with only Windows Vista drivers available: Latitude systems use R231570.  Guess that's fairly simple.

    Thanks in advance for any help.

    First question 32 or 64-bit Windows 7?

    Reference Dell system software must be installed before the chipset R260746 (64-bit) or R260745 (32 bit). I guess that 64-bit because of the drivers that you have mentioned so far.

    The A18 to the BIOs update does not A17 and should be valid for all systems D630. Be careful when you install the update to the BIOs, a failed BIOs update can brick system, but this happens only on a very rare occasion.

    You should try to enter your serial number in the original configuration of the system to see what it came with. www.Dell.com > support > configuration of the system (on the left)

    From there, you can be able to know what the card wireless and what video card you have. The only other drivers are those for mobile broadband.

    You should have:

    1. Dell System Software (1) R260746 (64-bit) or R260745 (32 bit)

    2. Intel Chipset (1) R153997 (64 or 32-bit)

    3. nVidea or Intel Video (1) R224649 (64-bit), R224635 (32 bit) or R180864 (64 bit), R224635 (32 bit)

    4 SATA (4) R154201 (64-bit), R154200 (32 bit), R154164 (32 and 64 bit), R154198 (32 and 64 bit), R167146 (32 and 64 bit)

    5. modem Conexant, Application and utility under Comms (3) R150157 (64-bit driver), R150152 (32-bit driver) R147123 (64 and 32 bit app) R148605 (64 and 32-bit utility)

    6 Broadcom Ethernet (1) R151326 (64 bit) R151327 (32 bit)

    7 Dell Wireless or Intel Wireless 2 options (1) R295615 (64 or 32-bit) or R239284 (64 bit), R239283 (32 bit)

    8. audio (1) R171788 (64 or 32-bit)

    9 Dell Quickset (1) R182249 (64-bit) or R180762 (32 bit)

    10 Bluetooth (1) R231570

    11 security, UPEK and O2Micro (2) R182329 (64 or 32-bit), R167686 (64-bit), R173506 (32 bit)

    12 Touchpad (1) R165805 (64-bit) and R165804 (32 bit)

  • 0xc0000225 or 0xc0000017 errors at startup after a new Windows 7 install.

    I usually do an annual format on my computer, but this time I get nothing else to the errors after the restart of a new facility.

    It is either an error 0xc0000225 or 0xc0000017. I have has not installed a new material and used the same cd/version of windows 7 just like the time before.

    any help would be good.
    Vaughn

    Nevermind, fixed it
    http://support.Microsoft.com/kb/927392

  • PAVILION G6 NEW WINDOWS 7 INSTALL CAN'T GET NIC WORK, HP SOFTWARE DOES NOT

    I had to wipe the hard drive and reinstall w7 on my G6 Pavailion, but I can't work network card. The main reason is that I don't know what the wireless network card is mounted so I can install the appropriate driver to the driver page HP as there are a number of options please help.

    Model no. been G6-1325SA don't. A8M62EA #ABU

    You are the very welcome.

    Ago made good...

    Here is the link to the wireless card driver you need:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100125-1&cc=us&DLC=en&LC=en&OS=4063&product=5211762&sw_lang=

  • new windows 10 install, does indicate no device enabled for my plan

    Just like the title says, I have tried literally everything I can find on the internet and he says still no device.  I can only download the trial versions of applications.  I have a big project to do this week and simply cannot be without first and After effects.

    What can I do else?

    Your subscription to cloud shows correctly on your account page?

    https://www.adobe.com/account.html for subscriptions on your page from Adobe

    If you have more than one email, you will be sure that you use the right Adobe ID?

    .

    If Yes

    Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

    -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

    .

    If no

    This is an open forum, Adobe support... you need Adobe personnel to help

    Adobe contact information - http://helpx.adobe.com/contact.html

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

  • WIN8 drivers for Optiplex 745, 755, 760, 780

    Hello

    I'm looking for drivers for Windows 8 for Optiplex 745, 755, 760, 780. Only Win7 drivers are listed in the driver download section... :( I need drivers of Win8 to WinPE4/deployment/imaging services.

    -Sean

    In most cases, Windows 8 will have all the necessary drivers.  Are there drivers in particular you need or you have problems with?

  • ACER Aspire 3100 died; Currently, using Dell Optiplex 745. Is it possible to transfer the license to new hardware?

    Separated from this thread.

    My ACER Aspire 3100 died.  I restored this Dell Optiplex 745 and want to run my old Windows7 Home Premium to my ACER on my current machine.  Is it possible to transfer the license to new hardware?  Here's the diagnosis:


    Product key of Windows7 Home Premium for AcerAspire3100

    Windows 7 Home Premium migrated to Dell computer

    Diagnostic report (1.9.0019.0):
    -----------------------------------------
    Given WGA-->
    Validation status: invalid license
    Validation code: 50

    Code of Validation caching: 0x0
    Windows product key: *-* - 74XYM - BH4JX-XM76F
    The Windows Product Key hash: KeYfcvXg/a1Q01x73 + f8IL/JC4Y =
    Windows product ID: 00359-112-0000007-85999
    Windows product ID type: 5
    Windows license type: retail
    The Windows OS version: 6.1.7601.2.00010300.1.0.003
    ID: {3E137034-9496-4E30-B0A9-557B440CD2E3} (3)
    Admin: Yes
    TestCab: 0x0
    WGA Version: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0x00000000
    Build lab: 7601.win7sp1_gdr.140303 - 2144
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    WgaER data-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    WGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 100 authentic
    Microsoft Office Enterprise 2007 - 100 authentic
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files\Google\Chrome\Application\chrome.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {3E137034-9496-4E30-B0A9-557B440CD2E3}1.9.0019.06.1.7601.2.00010300.1.0.003x 32*-*-*-*-XM76F00359-112-0000007-859995S-1-5-21-144871190-1108465423-1748584281Dell Inc.                OptiPlex 745 Dell Inc.                2.3.1 20070521000000.000000 + 000FA803607018400FA04090409Mountain Standard Time(GMT-07:00)03DELL B8K 100100Microsoft Office Enterprise 200712Y9u6AV6ROLix7muKCr67SHEI3 + 4 =81599-872-5374781-651131 15FA07F43EF9ED0

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 HomePremium edition
    Description: operating system Windows - Windows (r) 7, retail channel
    Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00170-112-000000-00-1033-7600.0000-1292014
    Installation ID: 016760155910838136584500866031194393756542210431530004
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: XM76F
    License status: Notification
    Reason for the notification: 0xC004F009 (grace period expired).
    Remaining Windows rearm count: 4
    Trust time: 01/09/2014-21:49:48

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: 0xC004C532
    Beyond: PASS
    Event timestamp: 9:1:2014 21:48
    WAT Activex: registered
    WAT administration service: registered

    --> HWID data
    Current HWID hash: MAAAAAEAAwABAAEAAAACAAAAAQABAAEA6GFW3JyFTmu2hi73wOvS6a5dQj32JyqF

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0x0
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    REFERENCE DELL APIC B8K
    FACP DELL B8K
    HPET DELL B8K
    STARTING DELL B8K
    MCFG DELL B8K
    SSDT DELL st_ex
    ASF!            REFERENCE DELL B8K
    TCPA DELL B8K
    B8K DELL SLIC

    If the Windows 7 Home Premium pre-installed with Acer, the answer is no, you cannot transfer it.

    The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

    -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

    -OEM Licenses are tied to the computer first you install and activate it on

    -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

    -OEM versions does not move directly from an older Windows operating system

    What is OEM software? :
    http://support.Microsoft.com/GP/oemsupport_1/en-GB

    Licensing FAQ:
    http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

    If it is a license purchased in retail store, the answer is Yes, you can transfer, but you may need to reactivate by phone:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • I have an optiplex 745 windows vista ultimate and it keeps freezing.

    Original title: freezing problem

    I have an optiplex 745 windows vista ultimate and it keeps freezing. Can someone please?

    Hello

    See if this helps you:

    Search for malware, if necessary using the safe mode with networking.

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Once in Safe Mode with network, download and run RKill.

    RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

    http://www.bleepingcomputer.com/download/rkill/

    Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    You can clean your hard drive using these two methods.

    "Delete files using Disk Cleanup"

    http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

    Using the free CCleaner program:

    http://www.Piriform.com/CCleaner

    In NO case use the registry cleaning Option in CCleaner

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    Update drivers:

    Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    "Optimize Windows for better performance.

    http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    It would be a good idea to run the System File Checker tool if you have corrupted files

    "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

    If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

    "How to perform a repair for Vista Installation"

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    See you soon.

  • Dell optiplex 745 with Windows 7 Pro

    I just bought a Dell Optiplex 745 refurbished with Windows 7 Pro.  It came with a HP Windows 7 Pro re install the disc and when I'm asked them thereon, they stated that a re HP install disk is identical to a Dell disk.  Is this true and if not what problems it will create if I have to re install Windows 7.

    They are the two Windows 7, one that said you is accurate, but there are also significant differences.  Dell Media is intended to be installed on a Dell computer and activate automatically, without the need for manual entry of the product key.  HP is designed to do the same... on a HP machine.  There is a good chance that he would not accept the Dell product key either... even if she have installed successfully.  In addition, most of the OEM media even install on other than a machine correspondent (HP discs usually install on Dell, not vice versa).

  • Dell Optiplex 745 with Broadcom NetXtreme 57xx Gigabit Controller with Windows 7 x 64 host cannot fill network

    All, I am new to the forum but have been reading up on top of a problem that had led me into a wall.

    I'm trying to create a development environment that uses VMWare Workstation 7.0.1 (and I tried with 7.0.0 before, leading me to)

    update in the hope of a quick solution) as a development of imaging and the test bench.  The system is a Dell Optiplex 745, upgraded to 8 GB of

    RAM.  Unfortunately, it seems that the biggest problem is the network card.

    I tried several different operating systems, and all DHCP requests are found in the AUTOMATIC private IP addressing.  This is even after I implemented a custom adapter (VMNet2) that fills explicitly to this network card problem.  I disabled VMNet0 and all because this dish was not working.  I have read some relevant

    messages, but nothing seems to help.  This included the http://communities.vmware.com/message/675649 and more

    positions listed on the registry settings.  I don't know what to do at this point.

    So, for those who do not know the Broadcom driver issues, they are apparently many.  It is important to disable the unloading, but

    I'm not able to find the settings in the post linked above.  It's quite similar to the OP for this thread.  I'm not

    know if it's a difference of conductor between the 32-bit and 64-bit implementations.  So, I updated from the version of the driver

    12.2.2.1 (b57nd60a.sys) of 10.100.0.0 (I think, can not driver rollback now to check because I need to work on VMS for urgent

    projects as soon as POSSIBLE).  So, as I said, I was unable to find the parameters of this post

    ()http://communities.vmware.com/thread/191085) mentioned below:

    • Large Send Offload (IPv4)

    • Large Send Offload v2 (IPv4)

    • Large Send Offload v2 (IPv6)

    What I found were these parameters:

    • Flow control (Auto, I tried to disable)

    • Priority and VLAN (priority & VLAN enabled; I tried priority and VLAN disabled)

    • Speed and Duplex (Knew better than to mess around here, has made the problems in the past, retired to Auto)

    • VLAN ID (always 0)

    • Wake Up Capabilities (Magic Packey; no one tried)

    • Unloading ARP (Enable; I tried to disable)

    • NS unloading (Enable; I tried to disable)

    I tried enabling / disabling all, specially those mentioning the unloading, all day without success.  This did not help.

    Later, I tried to add DontAddDefaultGateway, EnabledRSS and DisableTaskOffload keys to my CurrentControlSet on the

    host.  For some reason any DisableTaskOffload shows in the regedit, GUI, not the export of text.  Don't know what this means, and I'm too

    tired of care at this point.

    Host registry settings:

    Windows Registry Editor Version 5.00

    "ICSDomain"="mshome.net."

    "SyncDomainWithMembership" = DWORD: 00000001

    "NV Hostname"="HOME".

    "DataBasePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f,

    00,74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00,------.

    64,00,72,00,69,00,76,00,65,00,72,00,73,00 5 C 00, 65, 00, 74, 00, 63, 00, 00, 00

    "NameServer"=""

    "ForwardBroadcasts" = DWORD: 00000000

    "Domain"="domain.mei.contoso.com."

    'Hostname '=' HOME '.

    "SearchList"=""

    "UseDomainNameDevolution" = DWORD: 00000001

    "DeadGWDetectDefault" = DWORD: 00000001

    "DontAddDefaultGatewayDefault" = DWORD: 00000000

    "EnableWsd" = DWORD: 00000001

    "QualifyingDestinationThreshold" = dword:00000003

    "NV Domain"="domain.mei.contoso.com"

    "EnableRSS" = DWORD: 00000000

    "DhcpNameServer"="141.161.200.201 141.161.100.201".

    "DhcpDomain"="contoso.com".

    So, I'm not where that leaves me.  I am attaching a file vmx for a Windows XP (currently only started in WinPE) invited configured with bridged and IP information for the host and the guest.  If anyone can help me, I would be incredibly grateful.

    Guest VMX file:

    . Encoding = "windows-1252".

    config.version = '8 '.

    virtualHW.version = "7".

    maxvcpus = "4".

    scsi0. Present = 'TRUE '.

    memsize = '512 '.

    ide0:0. Present = 'TRUE '.

    ide0:0. FileName = 'Pharos PS.vmdk Test '.

    IDE1:0. Present = 'TRUE '.

    IDE1:0. FileName = "C:\Users\%username%\Documents\ISOs\peboot.iso".

    IDE1:0. DeviceType = "cdrom-image".

    floppy0.filetype = 'file '.

    floppy0. FileName = "autoinst.flp".

    floppy0.clientDevice = "FALSE".

    ethernet0. Present = 'TRUE '.

    ethernet0.wakeOnPcktRcv = "FALSE".

    ethernet0. AddressType = 'generated '.

    USB. Present = 'TRUE '.

    EHCI. Present = 'TRUE '.

    Sound.Present = 'TRUE '.

    sound.startConnected = "FALSE".

    sound.fileName = "-1".

    Sound.AutoDetect = "TRUE".

    MKS. Enable3D = 'TRUE '.

    pciBridge0.present = 'TRUE '.

    pciBridge4.present = 'TRUE '.

    pciBridge4.virtualDev = "pcieRootPort"

    pciBridge4.functions = '8 '.

    pciBridge5.present = 'TRUE '.

    pciBridge5.virtualDev = "pcieRootPort"

    pciBridge5.functions = '8 '.

    pciBridge6.present = 'TRUE '.

    pciBridge6.virtualDev = "pcieRootPort"

    pciBridge6.functions = '8 '.

    pciBridge7.present = 'TRUE '.

    pciBridge7.virtualDev = "pcieRootPort"

    pciBridge7.functions = '8 '.

    vmci0. Present = 'TRUE '.

    roamingVM.exitBehavior = 'go '.

    displayName = "Test Pharos PS"

    guestOS = "winxppro.

    NVRAM = "Test Pharos PS.nvram."

    virtualHW.productCompatibility = "hosted".

    easyInstall.keepFloppy = 'TRUE '.

    extendedConfigFile = 'Test Pharos PS.vmxf'

    ethernet0.generatedAddress = "00: 0C: 29:64:09:63.

    tools.syncTime = "FALSE".

    UUID. Location = "56 4 d c0 0 b b2 3 b 33 07-24 4 c 65 64 09 63 a4 b1.

    UUID. BIOS = "56 4 d c0 0 b b2 3 b 33 07-24 4 c 65 64 09 63 a4 b1.

    cleanShutdown = 'TRUE '.

    Replay.Supported = 'TRUE '.

    Replay.FileName = «»

    ide0:0. Redo = «»

    pciBridge0.pciSlotNumber = "17".

    pciBridge4.pciSlotNumber = "21".

    pciBridge5.pciSlotNumber = "22".

    pciBridge6.pciSlotNumber = "23".

    pciBridge7.pciSlotNumber = "24".

    scsi0.pciSlotNumber = "16".

    usb.pciSlotNumber = "32".

    ethernet0.pciSlotNumber = "33".

    sound.pciSlotNumber = "34".

    ehci.pciSlotNumber = "35".

    vmci0.pciSlotNumber = '36 '.

    vmotion.checkpointFBSize = "134217728.

    USB:0. Present = 'TRUE '.

    USB:1.present = 'TRUE '.

    ethernet0.generatedAddressOffset = '0 '.

    vmci0.ID = "1701054819".

    tools.remindInstall = 'TRUE '.

    USB:1.DeviceType = "hub".

    USB:0. DeviceType = "mouse".

    ethernet0.VNET = "VMnet2.

    ethernet0. ConnectionType = "custom".

    debugStub.winOffsets.version = "7".

    debugStub.winOffsets.value = "0 x 0, 88 x 84, 0 18 0 x 190 x, 0 x 174, 16, 416, 0x22c, 0 x 228, 0x1f0, 0 x 224, 0x20, 0x18, 0x18, 0x20, 0 x 24, 0x11c, 0 x 8, 0 0, 0, 4 x 0, 14 x 100000, 0xc, 0xc, 0x1b0, 0x18, 0x13c, 0x1f4.

    Host adapters:

    Windows IP configuration

    Name of the host...: TOWMI

    Suffix main Dns...: domain.mei.contoso.com

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.

    ... DNS suffix search list: domain.mei.contoso.com

    Contoso.com

    Mei.contoso.com

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. : contoso.com

    ... Description: Broadcom NetXtreme 57xx Gigabit Controller

    Physical address.... : 00-19-B9-38-5A-03

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: fe80::25cc:6bfc:91 has 9: d64d % 11 (Preferred)

    IPv4 address...: 10.205.3.136 (Preferred)

    ... Subnet mask: 255.255.254.0.

    Lease obtained...: Monday, 1 March 2010 16:00:06

    End of the lease...: Tuesday, March 2, 2010 16:00:05

    ... Default gateway. : 10.205.2.1.

    DHCP server...: 141.161.200.213

    DHCPv6 IOOKING...: 234887609

    DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03

    DNS servers...: 141.161.200.201

    141.161.100.201

    NetBIOS over TCP/IP...: enabled

    Ethernet VMware Network adapter adapt VMnet1:

    The connection-specific DNS suffix. :

    ... Description: VMware Virtual Ethernet adapt for VMnet1

    Physical address.... : 00-50-56-C0-00-01

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: fe80::ace9:b312:d32d:fb39% 16 (Preferred)

    IPv4 address...: 192.168.58.1 (Preferred)

    ... Subnet mask: 255.255.255.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 352342102

    DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    Ethernet VMware Network adapter adapt VMnet8:

    The connection-specific DNS suffix. :

    ... Description: VMware Virtual Ethernet adapt for VMnet8

    Physical address.... : 00-50-56-C0-00-08

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: fe80::1c44:4e88:3178:4ccf % 17 (Preferred)

    IPv4 address: 192.168.168.1 (Preferred)

    ... Subnet mask: 255.255.255.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 369119318

    DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    Tunnel adapter isatap. {4EF89CD9-7A7D-4B80-83C5-A56D5FA6D748}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft ISATAP adapter

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 9:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Teredo Tunneling Pseudo-Interface

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {E03C7ECA-35DF-43C6-BCC8-08D2BB8E4233}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Microsoft ISATAP #2

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter ISATAP.contoso.com:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. : contoso.com

    ... Description: Adapter Microsoft ISATAP #3

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Adapters of comments:

    Windows IP configuration

    The host... name: minint-et0ko7r

    Primary Dns suffix...:

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. :

    ... Description: VMware accelerated AMD PCNet Adapter

    Physical address.... : 00-0C-29-64-09-63

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: fe80::8842:488e:b75:ec51 %2 (Preferred)

    Autoconfiguration IPv4 address. . : 169.254.236.81 (Preferred)

    ... Subnet mask: 255.255.0.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 33557545

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    See also my VNE screen capture and sample log file attached.  Thank you very much in advance for any help.

    Sorry, had to rub a small part of the newspaper for my own protection.

    Post edited by: alharaka

    I'm sorry, I completely forgot to reply to this topic yesterday (get distracted by a matter of work).    I'll be back today and noticed that you have marked this as answer.  The root cause of the problem was therefore one MAC address per port restriction put in place by your network management team?

  • New wifi router installed. Why do connect to sites but lose the connection as I browse even though Windows said excellent signal. To deactivate/activate

    New wifi router installed. Because then I can usually connect sites OK but when getting around a site or to another, I lose connection even though Windows said signal is excellent. Toggle heals the problem temporarily. Two tablets under the same roof using wifi even have no problem. There is no consistency in when the problem arises in any session. It happens in Firefox and Thunderbird. Close and restart the program does not help.

    I tried the reset and it was not good. Then I learned that my wife had a similar problem with his ipad I did what I should have done at the beginning, I restarted the router again. Hey presto, problem solved.

    Now, I'm off to eat some humble pie. Thank you, guigs2

  • The sign '+' opens NEW TAB stopped working. I have to open a new window each time. I tried to uninstall firefox and install again but the problem persists. Someone guide me on this.

    The sign '+' opens NEW TAB stopped working suddenly. I have to open a new window each time. I tried to uninstall firefox and install again but the problem persists. Someone guide me on this.

    Your agent uisr string is "Mozilla/5.0 (Windows;" U; Windows NT 5.1; en-US; (RV:1.9.2.15) gecko/20110303 AskTbMPC2/3.11.0.15286 Firefox/3.6.15 ', the part of AskTbMPC2 shows you have the toolbar installed Ask. Some third-party programs will add the Ask toolbar.

Maybe you are looking for

  • Satellite A30 will stop automatically

    Hello I have a Toshiba Satellite A30 laptop.I'm trying to re - install the original windows home edition while I missed the latest windows and I don't have any OS on my laptop. First problem is, I'm not able to edit the topics from a hard disk to the

  • Change the icons for the App

    I know how to change the icons, I've done before on Yosemite. But now, some applications (System preferences, Preview) do not change their icons. I receive the "the operation cannot be completed because you do not have the permission" "message. And I

  • HP ENVY 15-j052nr TouchSmart: Question Mini PCI-E Slot

    Hi, here is my problem: I replaced with an external GPU adapter wireless LAN module, I thought that the port Mini PCI-E free, my laptop was able to detect this new GPU adapter, but turns out he didn't, only the Wifi Slot detects it I can still use th

  • Team Crossword app does not work

    Team Crossword app disconnects from the server. Cannot use it.

  • Smartphone blackBerry, bible, Quran download dictionary

    Kindly help on how I can get a dictionary, the bible and the Koran on my bb. Thank you.