New wireless printer will not see my router wireless/network

Similar Questions

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• PC will not 'see' Mac on the network wireless

  I just installed a Linksys WRT54G Router, and created a home network, which includes free Wi - Fi for my MacBook Pro.  The ethernet connected PC does not 'see' the Mac.  I know they are connected from the Mac can access the internet and can see files in folder on my part that I installed on the PC (after I have provide the password).  I'm running VISTA on the PC.  The network is set up in a private capacity.  In the "Network and sharing" screens on the PC, the network discovery and file sharing are on.  I checked with my internet provider to ensure that their safety programs are not the issue and found that starting the PC in safe mode doesn't change anything.  The card network and sharing or full view map only shows the PC, the name of the network and the internet.  It never shows the Mac well that the Mac indicates the network name as its connection.  Can anyone help or is it a problem that can be a gazillion things?

  Hello

  I suggest you to see link and check if it helps:

  Mac 101: File sharing

  http://support.Apple.com/kb/ht1549

• My printer will not be connected to the network

  I found a few options in the Advanced menu of the printer which can be useful for various network connectivity problems that are often overlooked.

  The provided screenshots are for a printer Envy 110 and an Officejet 6500 printer has, but many models in the same range of products have similar features.

  For starters, get the IP address of your printer and load the printer in a web browser by entering the IP address as a web address.

  Once it loads, you can get something similar to one of the screens below:

  New Photosmart printer or Envy series:

  To access this screen, navigate to network > advanced.

  

  OfficeJet series printer or older photosmart printer:

  To access this screen, navigate to network > advanced.

  

  There are a few options on this screen below that are of interest.  The photosmart screen has a 802 use behavior. 11b network infrastructure and use an infrastructure network 802. 11b / g behavior options.  The first option will tell the printer to only operate in B wireless settings and second options tells operate with wireless B and G parameters.

  Most routers are set to mixed mode which is B and G.  The second activation option can help maintain the wireless connection and is certainly worth trying to help eliminate some of the problems network there.

  The Officejet screen has another option which is not available on each printer: in a network ad hoc Act bound even if others are not present.  Activate this option, if any, can help keep the printer stay connected.  Curiously, I've seen a few posts that this setting has helped with an infrastructure facility despite what says the setting.

  I hope that this information will help you to solve and prevent some network problems.

• I have a jrl system plotter/printer and driver for windows 98, but my new windows xp will not see the tracer. I used add printer/fax to install, but when the final 'Finish', he could not install. Help, please

  I have an old windows 98 are dedicated to this plotter and it work fine until we have upgraded to the new machine with windows xp.

  Hello Dzuco,

  Thank you for your message.  You will need get a driver xp for printer/plotter.  Pilots are produced by the manufacturer and are usually downloaded from their Web site, however, I can't seem to find anything online to JRL Systems.  I recommend you contact JRL systems for the suitable driver for your printer.  You also have the option to search the Web for 'plotter jrl systems printer driver.  Don't forget that some 3rd party software can contain viruses and malware, so take precautions by downloading and installing the 3rd party software.
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Installed on a new system, printer will not print

  I have a problem with my Brothers printer that I put myself in my Toshiba, a new computer I have, I have just purchased-i he transferred from my old computer Dell - I downloaded it, I have a print copy of windows from 9/1/2012-when I put in place said sucessfully completed,

  PROBLEM IS I CAN'T PRINT ANYTHING FROM MY COMPUTER - WHAT TO DO I TROUBLSHOOT?  I have TRIED EVERYTHING - not EU NO ANSWERS-thank you-PAULA BARON

  A moderator has moved this thread to Windows 7 for the hardware and drivers Forum of feedback Forum.

  Hey, Paula,.

  What is the model # of the printer?

  Using Windows 7?

  Do you receive error messages when you try to print?

  Beginning< right="" click="" on="">

  Select manage

  Select Device Manager

  Do you see yellow exclamation or question mark?

  Do you see # code messages in the status of the printer properties window?

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Have you checked your ink cartridges?  If not used on a regular basis (monthly), they will dry out.

  Try cleaning the printer

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01609042&CC=ad&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0001

  Cannot print, print jobs are stuck in the print queue

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02205477&CC=ad&DLC=en&LC=en

  You might also look for downloads of your printer.  Check the availability of a troubleshooting utility

  http://www.brother-USA.com/printer/

• HP deskjet 2540: HP 2540 printer will not connect to new router

  Hi, we just changed internet service providers and the printer will not connect to the new router, our HP laptop computer presents the printer in the list of network devices / wireless, but will not accept the password of network to the router when I ask him to connect. Makes me crazy! I have re-installed software etc. to connect the drive and make me anywhere I hope someone can help!

  Dave.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• HP b209a printer range will not connect to router comcast using the WPS button

  HP b209a printer range will not connect to router comcast using the WPS button. I try to use a new Comcast router (technicolor TC8305C). When I try to connect the printer times out and says that no connections are when I check for wireless connections. Yet, when I print the network configuration page, the SSID for the new router is at the top of the list. I reinstalled the software by the support of Comcast, but it did not help.  I'm ideas please help!

  Thank you

  Never use WPS to connect.  If done it should be disabled in the router for security reasons.  Connect manually via the SSID and password following the instructions in the manual.

• OfficeJet 4620 3-in-1 printer will not print on the wireless network

  Have updated my Mac OSX to Yosemite (10.10), & now the 4620 Officejet will not see my WiFi network.  Have already uninstalled & reinstalled, used USB and installation CD.  Restarted the router also.  The printer went as far "Retore System Defaults".  Any suggestions?

  THX

  Hi @tomiet,

  Welcome to the HP Forums!

  I see that your HP Officejet 4620 will print on your wireless network, using Mac OS X 10.10. I'm sorry to hear that, but I'm happy to help you!

  I recommend trying an installation installation of Wireless USB. Please consult this guide, convert a wireless USB connected printer. In addition, this video can help as well, Configuration of wireless USB printers.

  I hope this will solve your problem of connection and have a nice day!

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• My new printer will not print on my Quicken reconcile report. It prints my program Word and e-mail very well.

  My new printer will not print on my Quicken reconcile report.  It prints my program Word and e-mail very well

  If I understand correctly your new printer (brand and model, please) is properly installed on your computer (version of Windows and the service pack, please), but does not print Quicken (version, please) reconciliation report.

  Without more information (such as an error message or description of what happens when you try to print), it sounds like all you need to do is to set up Quicken to use the new printer.  The following is for 2011 Quicken, but should be the same or similar for all recent versions of Quicken:

  Click file > printer setup > for reports/charts
  In the window that opens, select your new printer using the drop-down list.  You should keep the default margins and fonts.  Click OK and you should be good to go.

• My canon printer mx420 does not see my router to access point

  My canon printer mx420 does not see my router to access point. What can I do about it.

  Hello Rick,

  I went online on the website of Canon, and there were 25 games for "printer sees router access point; you might want to try this page: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx420?CMD=MIXED_SEARCH&mName=PIXMA+MX420&mType=PIXMA+MX&pageKeyCode=ekbresults&searchString=doesn't+see+router+access+point&BASIC_SEARCH_CURRENT_TOPIC_ID=1076&BASIC_SEARCH_CURRENT_TOPIC_TYPE=0&RESULTS=RELEVANCE&RELEVANCE_START=1&RELEVANCE_COUNT=25&CONFIGURATION=1011&PARTITION_ID=1&TIMEZONE_OFFSET=null&USERTYPE=1&isSecure=false .

  If you have no luck after visiting the Canon site, post back here with what you tried, and we'll go from there. I hope this helps you.

  Kind regards

  BearPup