new yellow ink cartridge (564) do not correctly print Photosmart HP 7510 e-all-in-one

Similar Questions

• "Scan to computer" is not turn on Photosmart HP 6510 e-all-in-one printer B211a

  New user on that and I would be grateful for all the help I can get. I recently bought for the 6510 HP Photosmart e-all-in-one printer B211a to use with my Ipad 2. I've set up correctly, or so I think, I can print and copy, but I can not seem to be able to analyze anything send it to the Ipad 2. It says 'none found computer. ' I do not use the software to install and configure it up to the Ipad 2. How can I make the printer identify my Ipad 2, so I can scan? Help, please! Thanks in advance.

  Hello

  The front of the product allow you to scan to computers with the complete software installed only, such a feature not planned mobile operating systems.

  To scan from iOS, you can use the HP ePrint home & Biz, on the App Store application available.

  Then you can analyze by launching the application analysis.

  Kind regards

  Shlomi

• Photosmart 7520: hp photosmart 7520 yellow ink cartridge will not in (pop out of space)

  I tried to install two different new HP 564 XL yellow ink cartridge in my Photosmart 7520. They arise constantly from their slots. I managed with the magenta cartridge that is similar, but the yolks do not remain in place. What is the solution?

  Hi Rebmark, I did some research and found a troubleshooting page that describes some steps that might solve this problem.
  
  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/document/c02944025

  Step #9 may be the answer you're looking for. When the ink cartridges is not properly connected, it can help try gently bending the cartridge tab try to avoid to bend this tab over a half inch, as it could damage the cartridge.
  
  I hope this helps, but let me know if you're still having problems!

• Photosmart 6520 does not print the new black ink cartridge

  My new black ink no longer works on the printer.  This seems to be a problem throughout all of the printers HP no matter what model.  Did someone with similar problems had success getting their black to print despite all recommendations of manufacturing without success?  I have my printer just over a year.  I think it's ridiculous that a product falls down that quickly for money which is devoted to this topic.  I called HP for technical support and after doing all the things, he recommended that he told me that my printer is broken... is no longer under warranty... but he will sell me gladly one handed to nine for more than the cost I would pay if I bought it new from Amazon.  I trust is no longer the product... Why would I want one handed to nine?  Just looking for more tips out there who may have worked for others, before going out and buying an Epson.

  Had same problem, went out and bought new cartridges ink and all but worked black, what to do, throw it in the trash? or have a go at fixing, because I had just spent more than $90 on new cartridges, I thought I'd be there is attachment.

  To cut a long story short, that I managed to detach, scratching the dining room in the process, wife not impressed! puledl the ink outside, white liquor dispenser put spray gave him a good squirt, put back together, it now works like a new! Yay! Geez I'm so smart.

• HP Photosmart C309a does not print after I installed new black ink cartridge.

  Printer was working fine until I replaced the black ink cartridge.
  Does not print the text in black on the printer test page.
  The States new HP printer installed cartridge.
  All other colors are working well and were replaced at the same time.
  Tried cleaning cartridges - pulling the cartridge and put back in - turning the printer off and on again.
  Also tried to restart the computer.
  Could there be a problem with the ink cartridge itself?

  REAL SOLUTION. I had the same experience, spent hours pulling my hair like children had project do to school and it was 22:00.  Your cart is clogged! Here IS THE SOLUTION! (: 1) remove all ink cartridges. (2) extract the carriage that circulate in the ink cartridges by lever on the right and the trolley lifting vertically. (3) wipe any accumulation of visible ink on the outside with clean cloth or paper towel. (4) THIS IS THE KEY: keep transport under hot running water to empty all the handwritten entries in the irrigation channels that distribute ink. Keep rinsing in clear water i.e. no sign of ink. (5) trolley dry with clean cloth and blowing in areas, you can access in order to remove the remains of the water. (6) let transport air-dry overnight. (7) Re-install transport, then reinstall the ink cartridges. 8) ENJOY YOUR PRINTER. (9) I saw many entries on this topic dating back two years, without real solution offered. I am an automotive engineer in unemployment. If HP (or anyone else) would like to hire a smart worker, engineer in the Detroit area, please inform. Thank you!

• D7160 yellow ink cartridge

  Hello

  My D7160 yellow ink cartridge was empty. I inserted a new, which has been recognized by the printer as 'original HP' and realigned. After that the ink level on the display remained zero and the computer asked for a new cartridge. So I did. Result: still zero ink. Now I don't know what to do more.

  Can anyone help?

  Thanks, Evert

  I installed a new yellow cartridge so it is not reconigized all colors are distorted.

• Re: C510 black eStation ink cartridge work do not

  Frustrated REEEEEALLY. After screwing around all day trying to get stuff printed I sit tonight with a new black ink cartridge and it's either not all black printing or it is a pale gray. All other cartridges work. Come here, when I click on links to every possible solution nothing opens for me. Before anyone asks, this printer is about 2 or 3 years, but had BARELY BARELY BARELY served. It is connected to an HP computer that is only a few years old with exceptionally light use also. I installed the updates that were available. He printed some photos fine this am, but I'm trying to print documents has put me in such a rage today I had better just go to bed. Warranty is out, so much for spending money on a printer expensive in the hope that it would last. Hope this will be a quick solution. It's really annoying to keep buying new printers all the few years despite them get such use of the lamp

  Hi @Furbio and welcome to the Forums of HP!
  
  I'm sorry to hear you had so much trouble for your C510 to print in black, but I will certainly do my best to give a helping hand
  
  Because you mentioned that you have questions, open links of the forums, I'll have everything written here in my post, so I apologize in advance for how long this post can get!
  
  First of all, I would like you to clean the contacts on each cartridge by following the steps below taken from the document a "incompatible cartridge" or "not compatible ink cartridges" Error Message on the computer or the all-in-onefor your printer. "
  
  Follow these steps to clean the electrical contacts of the cartridge.
  1. gather the following items:
  Clean cotton pads
  Paper clean and lint to rest the cartridges on (coffee filters work well)
  2. press the power button to turn on the printer.
  3. open the cartridge access door. Lift the corner front right of the printer until it locks on the door in the full open position. Wait until the print carriage to move toward the center of the printer.
  4. press the tab on the front of the cartridge to release it, then pull it up and out to remove it from its housing.
  5 hold the cartridge by its sides with the nozzle facing up.
  6 locate the electrical contacts on the bottom of the cartridge. The electrical contacts are four small rectangles of copper metal.
  
  7 wipe the electrical contacts with a q-tip clean and dry until no debris remains on them. Make sure that no ink or debris from the smear on the transparent window next to the electrical contacts.
  8. place the cartridge on the clean and lint paper with the nozzle upward.
  9 locate the electrical contacts inside the carriage. Electrical contacts are similar to a set of four copper color placed pins to touch the electrical contacts on the cartridge.
  10. clean the electrical contacts inside the car with a clean, dry cotton swab, second.
  * Please do for each cartridge, just to be complete
  11 drag each cartridge into the slot that is appropriate until it snaps. Make sure that you insert each cartridge into the slot with the corresponding color icon.
  12. close the cartridge access door.
  
  After completing these steps cleaning cartridge, if the problem still persists, I would like to manually clean the electrical contacts on your print head (the part the cartridges sit in inside of). These measures were taken from the replacement print head for your printer paper (with a few changes to make things more clear ).
  
  Follow these steps to clean the electrical contacts on the print head and inside the printer.
  1. press the power button to turn on the printer, if it is not already selected.
  2. open the cartridge access door. The carriage moves to the center of the printer. Wait that the carriage is idle and silent before proceeding.
  3. to remove the cartridges, press the tab on the front of the cartridge, and then pull it upwards to remove it from its housing. Do this for each cartridge.
  4. to remove the print head, lift the locking on the carriage to the stop handle.
  
  5. place the print head on its side on lint cloth or absorbent paper and use a fluffy and filtered/distilled water to clean the electrical contacts inside the printer as shown below.

  
  
  6 proceed to clean the electrical contacts of the print head as well using the same materials. Just be careful not to touch the contacts with your fingers.
  
  7. once everything is dry (try not to let the printhead out for more than 10 minutes if possible) please proceed to reinsert the printhead to the printer and gently drop the locking handle to fix it up before you reinsert the cartridges and close the printer.
  
  
  When the printer is finished it is maintenance, try to print a report to see if the black is printing printer or if something has changed with the next steps in the document printing to a printer status report for your printer.

  1. In the home screen on the product control panel, press Menu () in the upper left corner. A list of menu options screens.

• Ink cartridge missing or not detected

  I feel as usual.  I went to another sheet of printing, and it came on my printer.  "Ink cartridge missing or not detected".  Earlier today, I put in a new black ink cartridge.  I took out and the color one, again no change.  I connected the printer to the front and back, waited, plugged back without success.

  I don't know what is the cause and I'm not very irritable with computers.  I thought to change color ink, but he is looking fine on the papers that I printed.   Help, please.  The printer is older, but I take care of it and have never had a problem until now.  It is a HP Photosmart C4240 all-in-one.

  Thank you!

  Nevermind I found the answer.  I copy the information because it worked!

  I found this video very useful.

  The steps are also listed below

  1. press the button and the button cancel at the same time.

  2. you will be asked to enter a special code press the blue button, green button and the grey button (in that order, one after the other).

  3. press the grey button until the Menu "information".

  4. press the green button.

  5. press on the gray button until you reach checksum to lock new data entry.

  6. press the green button and wait a certain number to appear. It will be a random number and is not important beyond his generation.

  7. press the button cancel three times to exit.

  8. try the print message should be gone.

  I hope this helps. I know that it's my YAY!

• Fill new used ink cartridges refilled HP 1510xi all-in-one.

  I have 5 HP printers and still actively using 3 models of all-in-One: 1510xi; 5610xi; and J6480.  Reloaded 1510xi black cartridges (6) 92 (1) color cartridge 93 and 92 all will not work after update to install HP all-in-One. HP updates may have put an end to refill these cartridges. I had no problem before and refills limited to 4 or 5 max before you buy new cartridges.

  All cartridges except for the color display the error and won't print.  I replaced these cartridges with those who have not refilled and error warning does not, so it seems to be updated.

  Has anyone encounter this type of problem? Or know a solution apart from buying new in the use of reloaded cartridges?

  The only solution I know is using new genuine HP ink cartridges. Using ink filled or rebuilt is bad for the printer. If you have printers that are still under warranty, filled or rebuilt ink using the warranty of ink systems. The rest of the printer is still under warranty, but the print head and of any other part of the system of ink will not.

• HP brand new 4620 Officejet black ink cartridge and it won't print black at all the

  Hello, my printer has failed recently more ink. So I bought a set of cartridges to Staples. I installed them and ran the print head cleaning function. I now have the great color and BLACK NO. I ran to repeatedly print head cleaning function. Its so frustrating to monitor printers the past 2 decades range from reliable gains to unreliable everything in the financial goal. I've had printers since the 1980s, I used printers when they came with the ribbons, who hardly could, although they can indeed dry. At least when they dry out, you would be able to put a new one in and continue. Now that they have designed replaceable print heads (because they were made knowing that they will fail), ink cartridges that are not interchangeable (knowing that once you got with the printer model, you can most likely switch to another brand or model) that uses a DIFFERENT model ink cartridge. All for finacial gain. Between my office and home, I lived 4 printers in the past 2 years. I've been a loyal fan of Lexmark, until my old died and I bought a new, the first thing I noticed was the variable print head and I thought, uh oh, that is going to fail and so said, so done, within 3 months of using the printer, Lexmark sent me 2 print heads and 2 series of inks of replacement free of charge. I still have a set of ink and print head because the LCD screen turned white, lol. Had to throw it away. Eventually move to HP that I believe is made in the same factory as Lexmarks after comparison of many models. Now I have the newest HP to my office and its been so far great and SUPERB ink usage, PREVIOUSLY. I'm almost afraid to know what my future has in store. I know that I fell in a field off-topic, BUT HP, YOU SHOULD BE ASHAMED OF yourself. I have now lost $60 on a new series of cartridges and will most likely need a new printer since my warranty has expired. SMH. Bad business!

  A representative has in fact contact me to rectify the situation, even if my unit is out of warranty period. I really appreciate the effort. Kudos to HP.

• New-AlarmActionTrigger: A specified parameter is not correct

  Hello world

  I am trying to add a new alarm action to all my alarm vCenter definitions. Nothing complicated and because I'm lazy, I tried using PowerCLI for this. It's my little script:

  Get-AlarmDefinition | % {
    $_ | Get-AlarmAction | Remove-AlarmAction -Confirm:$false
      $_ | New-AlarmAction -Email -To '[email protected]' | % {
    $_ | New-AlarmActionTrigger -StartStatus 'Yellow' -EndStatus 'Red' -Repeat:$false
    $_ | New-AlarmActionTrigger -StartStatus 'Green' -EndStatus 'Yellow' -Repeat:$false
     }
  }
  

  When I run it, the action of the alarm and the two triggers are added. But when you add the alarm fires from "Yellow" to "Red", the following error occurs:

  New-AlarmActionTrigger : 04.07.2015 16:59:25    New-AlarmActionTrigger        A specified parameter was not correct. 
      
  At C:\Users\patrick\AppData\Local\Temp\bcfe38ed-7669-43dd-a588-7e88e59d70c4.ps1:4 char:8
  +         $_ | New-AlarmActionTrigger -StartStatus 'Yellow' -EndStatus 'Red' -Repeat:$fa ...
  +              ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      + CategoryInfo          : NotSpecified: (:) [New-AlarmActionTrigger], InvalidArgument
      + FullyQualifiedErrorId : Client20_AlarmServiceImpl_NewAlarmActionTrigger_ViError,VMware.VimAutomation.ViCore.Cmdlets.Commands.Alarm.NewAlarmActionTrigger
  

  Unfortunately I can not know what setting is not correct. The error occurs only for "Yellow" to "Red". No idea what is wrong or what did I miss?

  Thanks for the tips!

  Strange, as far as I know there is no beta 6R2 for now.

  Yes, it should work.

  You might find some clues in the vpxd.log.

  Otherwise, use Onyx to check what really happened to the methods.

• I put a new black ink cartridge and it says protected HP and won't do anything

  How can I get this new black ink cartridge to work my 5514 photosmart hp printer. It's a HP cartridge but it says HP protcted. I bought it at Staples.

  I'm guessing it's a recharged HP cartridge? I take it back to Staples and ask another. If possible, a genuine new HP cartridge

• After the installation of the new black ink cartridge, my pictures are distorted

  After installing a new black ink cartridge, my pictures are distorted

  Hello

  I suggest you to contact HP for further assistance regarding this issue.
  http://WWW8.HP.com/us/en/support-drivers.html

• HP Photosmart c309a ink cartridge black will not print

  I have a HP Photosmart model # 309 has all-in-One and now my black ink stopped printing. I ran all the tests; That is to say, aligned printheads, printheads cleaned, print a Diagnostic page and print a test without result page. My color will be printed, but when I try to print something from the internet or other, print the colors and the background is so low in black, it's unreadable. Hope you have solved the problem. My black ink shows that it is half full. My printer is 14 months old. Help.

  This widget could not be displayed.

• Re: Deskjet 3070 - replaced the cartridges but does not now print!

  I have the same problem with my printer Officejet 6700 Premium. I just replaced all the cartridges with HP new ones. The printer is now going through the motions but does not print blank pages. This happens for all what I am trying to print including Diagnostics pages. The printer is a little older a year is not under warranty. Any help would be greatly appreciated!

  Hello twoshirts,

  I saw your other threads, and I understand that you have completed all the procedures listed here troubleshooting: printer does not print black ink or color of ink or prints blank Pages without success.

  I would like you to follow the steps below:

  1. reset of the printer, please make sure that you plug the printer directly into the wall, do not use a surge protector or power bar, they can cause the printer is in an error state and lose features of base over time.

  2 a 'cartridge problem', "Ink cartridge failed" or not "compatible ink cartridges" Error Message appears on the all-in-one, I know you did the cleaning steps, but, if you please, reinstall the cartridges and perform all THE steps listed

  3. now go ahead and run HP print and Scan Doctor- it has been designed to provide users with HP and features troubleshooting fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  I understand that you are not able to print diagnostics from the menu on the front panel as well, but want to see if the PSDR detects all conflicts in the software or drivers.

  Please let me know the results.

  Thank you