Newbie Help

Similar Questions

• Newbie Help X 61 with own HD... .suggestions for operating system installation

  Hi Experts

  I searched Forum, database and made my research on Google... nothing helps... always confused :-/

  The X 61 Tablet opportunity is completely clean and I need to install an OS on it, preferably Windows 7.

  Can someone give me a clue as to how to install Windows 7 more easily...

  I have to go pick up some DVD USB drive?

  (remember Newbie ;-): "Lenovo Support - Lenovo ThinkVantage Toolbox for Windows 7 (64-bit) and Vista (64-bit) - portable desktop computers WorkStations_files" help me with drivers... or I have to download them 1 by 1 to the supportpage.)

  SRY if the foregoing proves to be too simple for you, dear friends... but I always wanted a Tablet and a thinkpad... hope my dream starts work soon - Thank YOU!

  (*_*)

  Hello mate,

  You can install Windows 7 from a USB key. Take a look here: http://technet.microsoft.com/en-us/magazine/dd535816.aspx

  After installing windows install update system: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73695

  It will automatically download all the drivers you need.

• BlackBerry Curve 8520 smartphone newbie help setting up please - have wifi but no browser, no internet, no email

  I just bought this opportunity curve near new.  He seems to have been correctly data erased by the former owner.  I ran the Setup Wizard and everything worked fine.  It is connected to my wifi with a signal strong. But

  1. the browser says "unable to connect to the Internet - contact your service provider', and

  2. the email setup screen does not offer of "I want to create or add an email address" as in the Guide of the user - only 'I want to use a work email account' that I don't have and don't want!  The screen message indicates if the "add an email address' ' option does not, provider of wireless.

  I don't understand!  If my TalkTalk broadband (wifi) to connect to my laptop to the internet without problem, what to do more I have too much to do to get on the internet (connected to the same wifi) Blackberry?

  3 and how do I connect to the internet via the phone (Vodafone PAYG) when I'm not at the wifi range?

  Finally:

  4. why my phone says 'unknown number' when he is screaming? The User Guide says it should show my own number.  Surely, he knows that the Sim card number?

  Completely out of my depth here, as you can see...

  Many thanks in advance for any help

  Michael

  Hiya, according to messages that your phone gives you... You will need to contact Vodafone.

  In order to use most of the features of your phone as email or BBM data, you need a data plan blackberry rather than the generic of your provider.

  Then call us Vodafone - I think that the BlackBerry Bolt On on the distribution is £ 5 per month with data inclusive.

• Newbie Help Needed: Cisco 1941 router site to site VPN traffic routing issue

  Hello

  Please I need help with a VPN site-to site, I installed a router Cisco 1941 and a VPN concentrator based on Linux (Sophos UTM).

  The VPN is established between them, but I can't say the cisco router to send and receive traffic through the tunnel.

  Please, what missing am me?

  A few exits:

  ISAKMP crypto to show her:

  isakmp crypto #show her

  IPv4 Crypto ISAKMP Security Association

  DST CBC conn-State id

  62.173.32.122 62.173.32.50 QM_IDLE 1045 ACTIVE

  IPv6 Crypto ISAKMP Security Association

  Crypto ipsec to show her:

  Interface: GigabitEthernet0/0

  Tag crypto map: QRIOSMAP, local addr 62.173.32.122

  protégé of the vrf: (none)

  local ident (addr, mask, prot, port): (192.168.20.0/255.255.255.0/0/0)

  Remote ident (addr, mask, prot, port): (192.168.2.0/255.255.255.0/0/0)

  current_peer 62.173.32.50 port 500

  LICENCE, flags is {origin_is_acl},

  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0

  #pkts decaps: 52, #pkts decrypt: 52, #pkts check: 52

  compressed #pkts: 0, unzipped #pkts: 0

  #pkts uncompressed: 0, #pkts compr. has failed: 0

  #pkts not unpacked: 0, #pkts decompress failed: 0

  Errors #send 0, #recv 0 errors

  local crypto endpt. : 62.173.32.122, remote Start crypto. : 62.173.32.50

  Path mtu 1500, mtu 1500 ip, ip mtu IDB GigabitEthernet0/0

  current outbound SPI: 0x4D7E4817 (1300121623)

  PFS (Y/N): Y, Diffie-Hellman group: group2

  SAS of the esp on arrival:

  SPI: 0xEACF9A (15388570)

  transform: esp-3des esp-md5-hmac.

  running parameters = {Tunnel}

  Conn ID: 2277, flow_id: VPN:277 on board, sibling_flags 80000046, crypto card: QRIOSMAP

  calendar of his: service life remaining (k/s) key: (4491222/1015)

  Size IV: 8 bytes

  support for replay detection: Y

  Status: ACTIVE

  Please see my config:

  crypto ISAKMP policy 1

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  encryption... isakmp key address 62.X.X... 50

  ISAKMP crypto keepalive 10 periodicals

  !

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac TS-QRIOS

  !

  QRIOSMAP 10 ipsec-isakmp crypto map

  peer 62.X.X set... 50

  transformation-TS-QRIOS game

  PFS group2 Set

  match address 100

  !

  !

  !

  !

  !

  interface GigabitEthernet0/0

  Description WAN CONNECTION

  62.X.X IP... 124 255.255.255.248 secondary

  62.X.X IP... 123 255.255.255.248 secondary

  62.X.X IP... 122 255.255.255.248

  NAT outside IP

  IP virtual-reassembly in

  automatic duplex

  automatic speed

  card crypto QRIOSMAP

  !

  interface GigabitEthernet0/0.2

  !

  interface GigabitEthernet0/1

  LAN CONNECTION description $ES_LAN$

  address 192.168.20.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  automatic duplex

  automatic speed

  !

  IP nat pool mypool 62.X.X... ... Of 122 62.X.X 122 30 prefix length

  IP nat inside source list 1 pool mypool overload

  overload of IP nat inside source list 100 interface GigabitEthernet0/0

  !

  access-list 1 permit 192.168.20.0 0.0.0.255

  access-list 2 allow 10.2.0.0 0.0.0.255

  Note access-list 100 category QRIOSVPNTRAFFIC = 4

  Note access-list 100 IPSec rule

  access-list 100 permit ip 192.168.20.0 0.0.0.255 192.168.2.0 0.0.0.255

  access-list 101 permit esp 62.X.X host... 50 62.X.X host... 122

  access list 101 permit udp host 62.X.X... 50 62.X.X... host isakmp EQ. 122

  access-list 101 permit ahp host 62.X.X... 50 62.X.X host... 122

  access-list 101 deny ip any any newspaper

  access-list 110 deny ip 192.168.20.0 0.0.0.255 192.168.2.0 0.0.0.255

  access-list 110 permit ip 192.168.20.0 0.0.0.255 any

  !

  !

  !

  !

  sheep allowed 10 route map

  corresponds to the IP 110

  The parts of the configuration you posted seem better than earlier versions of the config. The initial problem was that traffic was not in the VPN tunnel. That works now?

  Here are the things I see in your config

  I don't understand the relationship of these 2 static routes by default. It identifies completely the next hop and a mask the bytes of Middleweight of the next hop. Sort of, it seems that they might be the same. But if they were the same, I don't understand why they both make their appearance in the config. Can provide you details?

  IP route 0.0.0.0 0.0.0.0 62.X.X... 121

  IP route 0.0.0.0 0.0.0.0 62.172.32.121

  This static route implies that there is another network (10.2.0/24) connected through the LAN. But there is no other reference to it and especially not for this translation. So I wonder how it works?

  IP route 10.2.0.0 255.255.255.0 192.168.20.2

  In this pair of static routes, the second route is a specific subnet more and would be included in the first and routes for the next of the same break. So I wonder why they are there are. There is not necessarily a problem, but is perhaps something that could be cleaned up.

  IP route 172.17.0.0 255.255.0.0 Tunnel20

  IP route 172.17.2.0 255.255.255.0 Tunnel20

  And these 2 static routes are similar. The second is a more precise indication and would be included in the first. And it is referred to the same next hop. So why have the other?

  IP route 172.18.0.0 255.255.0.0 Tunnel20

  IP route 172.18.0.0 Tunnel20 255.255.255.252

  HTH

  Rick

• Not enough space on the data store.  Newb help please.

  I have a running ESXi 4.1.0 2 Windows VMs server.  Everything worked very well, but I had to turn off all of the server and physically move.  When I powered it back, only on virtual machines with the power on at the same time.  The other dies with the error above.  I have very little experience with VMware and I'd appreciate any help.  Thank you.

  Welcome to the community - the reason why you can't turn on your VM is because a vmkernel swap file is created when you turn on the virtual machine, and if there is not enough space, then, you will receive this error - you'll need clean the directories where are installed the virtual machines - you'll need to remove all of the log files If there are snapshots commit those and then you should be able to powere on virtual machines

• SQL Newbie help

  The following query works fine but I need to do the same thing but this time by using a join explicitly.
  
  Select Departments.Deptnumber, Departments.name,
  sum (quantity)
  from SalesOrderItems, departments
  where Departments.Deptnumber = SalesOrderItems.DeptNumber
  Departments.Deptnumber group, Departments.name;
  
  
  
  I tried
  
  Select Departments.Deptnumber, Departments.name,
  sum (quantity)
  INNER JOIN SalesOrderItems ministries
  ON Departments.Deptnumber = SalesOrderItems.DeptNumber
  order of Departments.Deptnumber, Departments.name;
  
  but get the error
  ERROR at line 3:
  ORA-00933: SQL not correctly completed command.
  
  any help will be great thank you.

  What version of Oracle are you using?

  SELECT * FROM v$version
  

  ANSI style joins are available with version 9. ? and at the top

  John

• Flash Builder 4.5 newbie help

  Hey guys,.

  Thank you for taking the time to read my post and help out me.  I am currently just learning actionscript 3 and I have been using flash professional in order to program most of my first flash programs, I want to take one of my ideas and create to run on blackberry playbook, then I downloaded flash builder 4.5 and have set up my whole environment.

  Im running into that problem is with flash professional imaging and video clips was as simple as adding objects to the library and then set up the link, so it could be used by your AS3 code, frames and layers were added through the... well with flash builder user interface, I have no idea of how to do because there is no GUI I wonder if someone could explain how to create and link to video clips and work with managers using the flash builder 4.5... I know this is probably a stupid question, but I'm not just

  Thanks in advanced for any help

  Hi nateatkins, Flash Builder is a software to develop flex and as3 applications. Do things with Flash Builder, you must code in .as and .mxml files. Flash you gives the opportunity to the graphic element, add them to a library, animate using the software interface and controls and publish them right out of the box, but this isn't the purpose of Flash Builder. You can use Flash to make a library of graphic elements, configure these elements to be available as classes in Actionscript, then export your library as a CFC to use them in a draft code of Flash Builder. Or you can choose to encode your actionscript code using external .as files in Flash and flash builder allows you to write them. Flash Builder is intended to make life easier when you are working on the code project using as3 object oriented and let encode you faster. Flash has its limits to help you when it's time to code, Flash Builder is there to improve your workflow development if necessary.

• Newbie help - Auto population

  Hello, I have a subform of coordinates (General information) and subform billing information. Is it possible to add an option button that says "even as general information. It would help so that our customers do not have to retype the name, address, email, etc.

  Hello

  Do not appoint subforms and objects is really wrong with you here. It is much more difficult to script.

  Here is the form to you:

  https://Acrobat.com/#d=MWWzrKO0Xqr0YvYEAq72nQ

  You will see that I named the subform billing information. If you look at the script in the click event of the checkbox, you can see the objects on the left are so easy to make reference to now. However because the objects on the right are still in a subform without name, each reference should be resolved. It works, but it is a pain.

  So I recommend that you name the subforms, pages and objects that you can, as this will make a breeze of script.

  Have also a look at the script in the event exit General information fields, as the reference to the box is now correct.

  See an example on the references of the objects here: http://www.assuredynamics.com/index.php/category/portfolio/referencing-objects/

  Good luck

  Niall

  Ensure the dynamics

• Newbie Help centering header image

  Hello

  I am a complete newbie to the DW design and website in general - I never used CSS and a bit of HTML. I'm sorry if it's a very simple question...

  I worked on a Web site for a magazine, I work with, and they wanted the place as soon as possible. If I had no time to browse tutorials or anything like that, just learned as I went.

  My problem is that I can't get my header image to Center. I am using one of the prefabricated models.

  Here is the site you can see how it works: www.inkandfairydust.com

  And a snapshot - it's only when the site is full screen I have this problem.

  

  My code:

  (argh, I can't paste! lol, just a simple little thing... :/))

  Hello

  1 (argh, I can't paste! lol, just a simple little thing... :/): )

  Yes it is (you have probably forgotten): source code > Strg or Ctrl A (if you want to send all of the code) > Strg or Ctrl C (copy) > Strg or Ctrl V

  2 garywpaul is certainly right, BUT only to show you a way how you pourriez to Center your image (from my German DW):

  

  Header 1
  Yours:
  New:

  

  Hans G.

  P. S.

  You must remove the spaces in the names of your images,

• Newbie Help please!

  Ive just made my first flash intro file that I want to open a web page after it has run at the end.

  In Action script 2, it would be as simple as placing this order at the end of the chronology of my intro in flash (so I thought)

  Can someone please help with what I have to change to work in Action script 3.

  //Goto Web page behavior

  getURL ("Halloween_09/use", "_self");

  //End behavior

  Thank you.

  import flash.net.navigateToURL;

  import flash.net.URLRequest;

  navigateToURL (new URLRequest("Halloween_09/Welcome.html"), "_self");

• Newbie HELP-Rectangle box

  I'm new to InDesign.  The guy who used to take care of our company directory in InDesign on the left.  I know very little about this software.  It has been days of trial and error, but am making progress.  I have the phone book for almost where I want to (I think), but can't figure out how to get rid of the outline of the rectangle box around the text.  I created the box by selecting the rectangle icon off the coast of the toolbar on the left, but I don't want the outline around the text that I put in.  Any help would be highly appreciated.  I'm an admin of systems AS400, not a graphic designer, so learn this stuff is like learning another language

  Select the area with the selection tool (arrow), make a right click, accident stroke weight: 0 if you view > show the contours of the block is turned on, you should be able to see the edge of the frame, even without a line on your monitor only, probably a blue line.

  Ken

• Newbie Help: PE7 Images?

  Hello, I just downloaded the version first Elements 7 track. I have a small video of 15 seconds and I'm wanting to add a. GIF image in the video. I asked a friend, and she said to use PE7 to edit my video. Well, my friend recently went out of town so I can't ask him for help. Is it still the right program to add a. GIF to video? I also Adobe Flash Professional CS4 for a future class, but I've never really used that is. I would really appreciate help, quickly. This video is for a good friend of mine and I have to give her as a farewell present before he returned to his native country.

  What you're talking about requires you to put movies on separate tracks.

  If you are familiar with the concept of "layers" that Photoshop (and image editing programs such use), then video titles feature in the same way.

  Basically, if you have a movie on Video 2, it will appear on the top of the film which is in video 1.

  See "place one clip above another in the timeline" in help for a description of how to do this.

  For more information on the functioning of the titles, see "Overview of the timeline" in aid and http://www.howstuffworks.com/video-editing.htm.

• Newbe help:-application of setting shape to a dynamic text box

  Hi I have a dynamic text box (box_pname), which is filled with the name of the specific page the user is currently, but I can't seem to apply any formting to the text (see code below).
  
  Can anyone help?
  
  Code
  
  Create a TextFormat object.
  var txt_fmt:TextFormat = new TextFormat();
  
  Specify the paragraph and character formatting.
  txt_fmt. Bold = true; apply "BOLD"
  txt_fmt. Italic = true; apply the italic
  txt_fmt. Size = 14; apply size 14
  
  This.box_pname = "enter the user details '; set the name of the Page
  This.box_pname.setTextFormat (txt_fmt); apply formatting to the text box
  
  Stop();

  Found, I had also entered the same name in the var area, once I deleted this text has changed. Thanks for the help.

• NEWBIE HELP - button script

  I am completely new to this, so no need to tell me how stupid the coding is and please keep the answers simple hehe... Thanks in advance to anyone who can help me here! :)
  
  Location:
  I have a menu with four mobile (interpolated classic) buttons, all coded the same.
  Two of them work, but two of them will not play/move. Everything is done exactly the same thing, instance names are correct and so on — but the debug'er said that there is something wrong with the third button (line 10, marked a *)- and gives me this error:
  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at 5_fla::MainTimeline/frame1()
  
  And if there is a better way to do this (which I'm sure there are a lot of), I would like to know how you would :)
  Any help is appreciated!
  
  Here is my first attempt at coding flash:
  ____________________________________________________

  you're the code seems fine - good job :) I see no error special here than other I could go with MouseEvent.CLICK - but it's an arbitrary choice and have is fine.

  a 1009 error means that 'something' you are targeting is not instantiated (present) on the timeline at the point where the code is executed. This could mean that there is a problem of instance name (you don't say - but it never hurts to double check... or maybe a little lol) also, it may be possible that one of the buttons (third) is on 'another framework' maybe in the near future? You can only assign event listeners to the items that are available at the time, so you should have to wait until then.

  Once again however, everyone must start somewhere - you're code is not stupid and you did a great job.

• API of IOM newbie help

  Hello
  I need to get the field laber for a UDF table, I did.
  
  On this page
  http://download.Oracle.com/docs/CD/E10391_01/ doc.910 /e10027/chapter2.htm
  
  I found that it can be achieved using this method:
  
  Form definition
  
  public String getUDFLabelForCode (String metaDataCode) throws tcAPIException
  
  Returns the label set for the field of the UDF. It takes as input the Lookup code defined for the field.
  
  But I do not know how to initialize an object to use the method.
  can someone help me?
  
  Thank you.

  But I do not know how to initialize an object to use the method?

  Does that mean the same thing that Kevin responded? Or you wanted to initialize the interface before using the API. Where do you want to use this API in the adapter code or a planner. If you do a card, then the link is in the thread below:

  Re: IOM JAVA API

  Also you can always extract the field of the ResultSet object by using the NAME of the UDF, so if it's just go and get the value of the field one or two times then you can go ahead without defining metadata and directly as resultSet.getStringValue("USR_UDF_FIELD")

  Thank you

  Sunny