Newbie here, get an error...
Hi, Im new to Java and JavaME and Blackberrys as a whole!
I started my project in netbeans editor in Chief seemed easier. Now I'm holding a project running from this BlackBerry JDE editor and hit an odd error. Probably a lack of understanding on my part.
When the program is run, it cannot find the graphic file to a sprite. The code I use is as follows:
... public void setup() { // Create the Sprite. Thread t = new Thread(this); BoardR=270; try { //Get Sprite Setup int gb=0; final Graphics g = getGraphics(); w=getWidth(); h=getHeight(); mLayerManager= new LayerManager(); Image frames = Image.createImage("/water6x6a.png"); MMx=640; MMy=384; } } ...
When it hits the frames of images of line = Image.createImage("/water6x6a.png)" it cannot find the file. The file is in the same folder as the Midlet which is running. I also tried to remove the forward slash "/", without success.
I try to launch it in the Simulator, and I get the error thrown in the debugger. Hats are the same file. I'm a little surprised... that way, but it's just one thing I can't figure!
The exact error I see in the debugger before the java.io.IOException law, is:
"CAFETERIA: did not water6x6a.png"
Last note, it works very well in Netbeans unmodified.
Thanks in advance.
Problem solved. I can't put my finger on it well. I deleted the project and then recreated. The only difference is that I've changed the directory that the project was in. Now the project name and the corresponding folder. I don't know if that was the reason, but the problem is passed.
Tags: BlackBerry Developers
Similar Questions
-
When I press the button Add card on my phone app here is I get the error message
Hi thanks, my cards have been on my iPhone 6plus for quite awhile. I recently bought an iwatch series 1. Watch and phone software is up to date. My app to watch on my phone recognizes my cards when I press the map button Add on my phone app here is I get the error message.
Hello
To be able to add cards to pay Apple on your watch, it will first the configuration of the area selected (like on your iPhone):
- On your iPhone, in the application of the watch, go to: Watch My > general > language and region - check Format correct region is selected.
- If they are already correct, it can help to select again the two the same Format of the region and also the language of the system itself.
Then follow the instructions here to add cards to the Watch:
More information:
-
When I try to use a clickable link, like in an e-mail that says 'click here', I get an error message. I know that there must be a setting that I don't see.
What kind of error message you get?
-
The error is the reference 0x00c91187
memory 0x47be01e0. The memory could not be readHere is a link to the screenshot of my http://tinypic.com/view.php?pic=1e56v6&s=8#.VCyjYPldVOZ error
I don't know why I get this error and its very annoying, my hard drive has 3 GB of space for 28 gigatbytes, why is there so much space taken up there and how I delete it without hurting important files
It dose it when you try to run an apillication game. or other
Sorry for not being detailed
I hear by clear weather, how to free up space on my D: recovery drive?
and I am referring to the game app is soldier fonts 2, it gives me error when I start the game
and no, I only get this error with the soldier make game 2 application only
and here's a better link RII
Sorry for the inconvenience
http://Tinypic.com/view.php?pic=1e56v6&s=8#.VC3GRfldVOZ
OMG IT WORKS SO BAD, I HAD TO UPGRADE TO WINDOWS 8.1 WAHOOOOO
-
I get an error (twelve updates), trying to update CS5 Master Collection. I used the chat and was told to come here.
update directly, http://www.adobe.com/downloads/updates/
-
After playing for some time a game face book or other websites, I begin to receive an error message that says a busy Script or does not. He has the ability to 'Continue' or 'stop' the script when I click to continue the same error keeps popping up all the time. Same as with by clicking on the 'Stop' the script option. Script # is https://s-static.ak.facebook.com/rSrc.php/vi/yx/r/LKHquoz1.v.js:5. Why I get this error? It gets really annoying. I hope you can help.
can you check this problem on Firefox 10?
-
[Newbie question] Get * = 08004, TimesTen error = 818 ODBC error
Just play with 10 times and I'm getting following error starting from data source
bash - $3.2. / ttadmin - cachestart cachealone1
[TimesTen] [driver ODBC of TimesTen 11.2.1.3.0] sum permanent partition sizes and temporary (2320 MB) exceeds the maximum size (2047 MB) on this platform
ODBC = 08004, TimesTen error = 818 error
Where Timesten hitting this limit of 2047 MB? Can I increase the maximum size by making some configuration changes (my machine like around 6 GB memory [Oracle DB is also installed on the same node]). I'm checking the various operations using larger tables (about 2 GB DB size).
The configurations are:
[root@stin77 ~] # / sbin/sysctl Pei
NET. IPv4.ip_forward = 0
NET. IPv4.conf.default.rp_filter = 1
NET. IPv4.conf.default.accept_source_route = 0
kernel. SysRq = 0
kernel.core_uses_pid = 1
NET. IPv4.tcp_syncookies = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 4294967295
kernel.shmall = 268435456
FS.file - max = per 6553600
NET. IPv4.conf.default.rp_filter = 1
NET. IPv4.conf.default.accept_source_route = 0
kernel. SysRq = 0
kernel.core_uses_pid = 1
kernel.shmmni = 4096
kernel.SEM = 250 32000 100 128
NET. IPv4.ip_local_port_range = 1024 65000
NET. Core.rmem_default = 262144
NET. Core.wmem_default = 262144
NET. Core.rmem_max = 262144
NET. Core.wmem_max = 262144
bash - $3.2 uname - a
Linux 2.6.18 - 92.el5PAE #1 SMP stin77 kills Apr 29 13:31:02 EDT 2008 i686 i686 i386 GNU/Linux
[cachealone1]
Driver=/localhome/Oracle/TimesTen/TimesTen/tt1121/lib/libtten.so
Data store = / localhome/oracle/Timesten/TimesTen/tt1121/info/DemoDataStore/cachealone1
TempSize = 320
PermSize = 2000
PLSQL = 1
DatabaseCharacterSet = WE8MSWIN1252
OracleNetServiceName = orcl
Kernel parameters:
[root@stin77 ~] # / sbin/sysctl Pei
NET. IPv4.ip_forward = 0
NET. IPv4.conf.default.rp_filter = 1
NET. IPv4.conf.default.accept_source_route = 0
kernel. SysRq = 0
kernel.core_uses_pid = 1
NET. IPv4.tcp_syncookies = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 4294967295
kernel.shmall = 268435456
FS.file - max = per 6553600
NET. IPv4.conf.default.rp_filter = 1
NET. IPv4.conf.default.accept_source_route = 0
kernel. SysRq = 0
kernel.core_uses_pid = 1
kernel.shmmni = 4096
kernel.SEM = 250 32000 100 128
NET. IPv4.ip_local_port_range = 1024 65000
NET. Core.rmem_default = 262144
NET. Core.wmem_default = 262144
NET. Core.rmem_max = 262144
NET. Core.wmem_max = 262144You are running TimesTen 32-bit on a 32-bit o/s. regardless of the quantity of memory has the machine, there are limits on how much can be used by an individualized process and additional limits the size of the file etc TimesTen 32 bit is limited to a maximum of 2 GB data store size.
To create a data store with a total size greater than 2 GB, you need a 64 bit machine running an o/s 64-bit and 64-bit TimesTen. Then, the only limit is the amount of memory physical you in the machine...
Chris
-
Hi I am a newbie for windows 7 and a kind of desire, I was still with windows xp! It is simpler and much easier to use "I tried to start Windows defender (which I am informed is included in my Vista) but every time I try to turn it on I get an error message informing me then Defender is stopped, but if I restart my computer it automatically lights Defender..." but this does not happen, I use Mcafee site advisor "could you please tell me if there is any chance that's causing the problem?"
Hey JoanneWatson,
Because this thread was started by someone else, and the age of the son, I suggest that you follow the link below to start your own thread.Ask your own question, helping the community help you specifically to your question. Don't forget to include all the details (your version of windows, your system specifications, any error codes etc.) that you can when you start your own thread.Thanks for posting on the Microsoft Answers JoanneWatson site! -
Gets the error ORA-01779 after I added the column
Hi, I'm a total newbie in APEX but collaborated with ordinary development Oracle (tables, views, packages, triggers, etc) for a number of years.
I ve been assigned in order to respect an existing application to APEX. One task is to add a column to a single character named 'ACTIVE' to a database table and also present on a current project list page. The value can be 'Y' or 'n'. In the view which is the source of data for the project page ad 'Y' turned into 'Yes' and 'n' turned into 'no '. So far so good, everything works well.
There is another page on which it is possible to create new or modify existing projects. This page uses a view as a source of data. On this page, I added a group of radiobutton that contains two options: 'Yes' and 'no '. When I select to edit a project in the project list page the second page is loaded and the correct option, 'yes' or 'No', is marked on the page. This group of radiobutton works exactly like a couple of other groups of radiobutton also represented with a single character column in the database. So far so good!
However, when I try to save the project file by clicking on "Apply Changes" I get this error:
ORA-20001: DML error: p_rowid = 50, ID = p_alt_rowid, p_rowid2 =, p_alt_rowid2 is. ORA-01779: cannot modify a column that is mapped to a table not preserved key
What is the problem here? The new 'ACTIVE' column is added to the view, when I run the view I Don t get all records in duplicate, the underlying table has a column id as the primary key.
Since I Don t know that APEX is under the hood it s hard tp what's wrong. Anyone knows the solution to this problem?
/ MagnusHello Magnus,
Is there an INSTEAD OF trigger defined on the view? Have you added the new column ACTIVE there too?
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this response in marking it as useful or Correct ;-) -
I get the error message "Untrusted connection" for a site I visit every day with the only option being "get out me of here!" I use Firefox version 39.0 and have Windows 8.1. I found a thread indicating how to solve this problem by removing the file cert8.db. I have used this method before and it worked then but it didn't this time. Tried to look elsewhere for help, but what I saw spoke of the time / date being off. However mine are correct sentence. Any help would be much appreciated.
https://support.Mozilla.org/en-us/KB/server-not-found-connection-problem
https://support.Mozilla.org/en-us/KB/Firefox-cant-load-websites-other-browsers-can
https://support.Mozilla.org/en-us/KB/secure-connection-failed-error-message
https://support.Mozilla.org/en-us/KB/connection-untrusted-error-message
http://KB.mozillazine.org/Error_loading_websites
This connection is Untrusted is sometimes caused because the
the computer system clock is wrong. Check the time / date / time settings of the area. -
I used a program called by Kivisoft to recover my music files on my hard drive. He recovered their property, but they were in the form of a ZIP file with a gz file. But whenever I tried to open the ZIP file, I get an error message saying broken pipe 32 error. There, someone knows how to open these files and recover music on their part could you explain in simple terms that I'm not good with the user base of coding software. Thank you
Here are some steps for you: http://www.wikihow.com/Extract-a-Gz-File
You can start by trying utility GUI Tar to unzip the .gz file
-
Kept getting the error message of synchronization for the last days
I was not able to sync my accounts in recent days.
Here is the error message:
"Sync has encountered an error during synchronization: the Firefox Sync server maintenance is underway, synchronization will automatically resume." Synchronize automatically retrying this action. »My last error log is below to:
1416113749815 Sync.ErrorHandler DEBUG Flushing file log. 1416113749817 Sync.Service DEBUG Exception: Login failed: error.sync.reason.serverMaintenance No traceback available 1416113749817 Sync.Service DEBUG Not syncing: login returned false. 1416113749817 Sync.Status DEBUG Status.service: error.login.failed => success.status_ok 1416113749821 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok 1416113749821 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok 1416113749840 Sync.ErrorHandler DEBUG Log cleanup threshold time: 1415249749840 1416113749844 Sync.ErrorHandler DEBUG No logs to clean up. 1416114123789 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok 1416114123791 Sync.ErrorHandler DEBUG Beginning user-triggered sync. 1416114123791 Sync.Service DEBUG User-Agent: Firefox/33.1.1 FxSync/1.35.0.20141113143407. 1416114123791 Sync.Service INFO Starting sync at 2014-11-15 21:02:03 1416114123792 Sync.Service DEBUG In sync: should login. 1416114123792 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok 1416114123792 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok 1416114123793 Sync.Service INFO Logging in the user. 1416114123793 Sync.Service DEBUG Caching URLs under storage user base: https://sync-129-us-west-2.sync.services.mozilla.com/1.5/9195458/ 1416114123795 Sync.BrowserIDManager DEBUG _ensureValidToken already has one 1416114124226 Sync.Resource DEBUG mesg: GET success 200 https://sync-129-us-west-2.sync.services.mozilla.com/1.5/9195458/info/collections 1416114124227 Sync.Resource DEBUG GET success 200 https://sync-129-us-west-2.sync.services.mozilla.com/1.5/9195458/info/collections 1416114124227 Sync.Service DEBUG Fetching global metadata record 1416114124227 Sync.Service DEBUG Weave Version: 1.35.0 Local Storage: 5 Remote Storage: 5 1416114124227 Sync.Service INFO Sync key is up-to-date: no need to upgrade. 1416114124227 Sync.Service DEBUG Fetching and verifying -- or generating -- symmetric keys. 1416114124227 Sync.Service INFO Testing info/collections: {"prefs":1415684960.1,"tabs":1416002806.09,"clients":1415999571.59,"crypto":1411776108.31,"meta":1413417019.06,"bookmarks":1415995802.11,"addons":1415981896.19} 1416114124227 Sync.CollectionKeyManager INFO Testing for updateNeeded. Last modified: 0 1416114124227 Sync.Service INFO collection keys reports that a key update is needed. 1416114124228 Sync.BrowserIDManager DEBUG _ensureValidToken already has one 1416114124424 Sync.Resource DEBUG mesg: GET fail 503 https://sync-129-us-west-2.sync.services.mozilla.com/1.5/9195458/storage/crypto/keys 1416114124424 Sync.Resource DEBUG GET fail 503 https://sync-129-us-west-2.sync.services.mozilla.com/1.5/9195458/storage/crypto/keys 1416114124425 Sync.Status DEBUG Status.login: error.sync.reason.serverMaintenance => error.login.reason.server 1416114124425 Sync.Status DEBUG Status.service: success.status_ok => error.login.failed 1416114124425 Sync.ErrorHandler DEBUG Got Retry-After: 3600 1416114124425 Sync.Status DEBUG Status.login: error.login.reason.server => error.sync.reason.serverMaintenance 1416114124425 Sync.Status DEBUG Status.service: error.login.failed => error.login.failed 1416114124425 Sync.SyncScheduler DEBUG Got backoff notification: 3600000ms 1416114124425 Sync.SyncScheduler DEBUG Fuzzed minimum next sync: 1416117724425 1416114124425 Sync.Service WARN Got status 503 fetching crypto keys. 1416114124425 Sync.Service WARN Failed to fetch symmetric keys. Failing remote setup. 1416114124425 Sync.Service WARN Remote setup failed. 1416114124425 Sync.SyncScheduler DEBUG Clearing sync triggers and the global score. 1416114124426 Sync.SyncScheduler DEBUG Next sync in 4079084.8112176084 ms.
It might take a little longer, because it is currently weekend and most of the engineers of synchronization are stationed at the United States Coast West zone...
Edit: you can follow along the progression of this this question to the bug #1100162
-
New HP laptop, Intel processor running Windows 10 (so I find it almost impossible to find something useful on the computer system - I'm NOT a fan of Windows 10).
(I have a Mac and an iPhone at home, so am very familiar with iTunes)
Downloaded iTunes for PC version 12.3.3 (which shows in my downloads as iTunes6464.exe)
But when I try to install the package I get an error message saying "you cannot install this program on a PC. Contact the Publisher of the software. »
No previous iTunes installs on this computer... I have on this machine - it's the only other Apple Quicktime software.
I'll hop on the site of HP support too, but would like to help here, if they are available.
Kath
Specific advice Apple seem to be uninstall QuickTime, it should no longer be necessary and has a few potential security vulnerabilities. See Uninstall QuickTime 7 for Windows - Apple Support.
Assuming that you have a 64 bit system, this facility expected to be compatible. For general advice, see troubleshooting problems with iTunes for Windows updates. More information area has direct links with the current and recent if you have problems to download, need to install an older version , or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software. It can help with the right button on the downloaded Setup program and use the run as Administrator option.
TT2
-
When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.
This has happened
Each time Firefox opened
I tried to download firefox.
User Agent
Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)
When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.
When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.
If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.
A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.
-
I did a factory recovery using Recovery Manager on my desktop of windows 7 Home premium, Pavilion Elite 150ff. After having installed all the updates and download flash player and Adobe Reader and install my Antivirus HP Photo creations program won't work, I get an error message saying DC18, and Microsoft claims it is incomatible, I have the icon on my desktop. Tried to download it from the HP website, but my anti virus detected a trojen, how can I get this program working again. All other programs work fine, my desktop is wired but my 7520e printer is wireless and connected properly. Also HP smart web printing does not work, using IE11.
Hi Emma.
Uninstall and reinstall HP Photo Creations should resolve the error. Here are the instructions step by step for Windows:
1. check your Internet connection
- If you have access to the Internet from a company or a network of offices, please make sure that the network or the firewall allows access to the HP Photo Creations software.
- Check your computer clock to make sure the date and time are set correctly.
2 uninstall and reinstall HP Photo Creations
Step 1: Uninstall HP Photo Creations
- Click Start
- Click on Control Panel
- Click Add or remove programs
- In the list, select and delete HP Photo Creations
Step 2: Download and reinstall HP Photo Creations
- Go to https://shop2.rocketlifeproduction.com/hpfe6fd34b208847e8f8254b9be96e8c4c/catalog.html?gta=download
- Click on the download button. Depending on your browser, you can choose to run or save the program. Choose run if they are available. (If you choose Save instead, double-click the file you downloaded).
- Follow the instructions on the screen to reinstall HP Photo Creations.
Step 3: Open HP Photo Creations
Open HP Photo Creations by double-clicking the shortcut on the desktop, and then confirm that it works.
I restart the computer after step 3 may help as well.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Our support team is always happy to help you. You can contact them at www.hp.com/go/supportform
Thank you for using HP Photo Creations,
RocketLife
Maybe you are looking for
-
Why disable Flash Player addon allow videos work on one site but not another?
I am running Firefox 37.02, Windows 7. I also have flash shockwave V17.0.0.134 & V18.0.0.95 addons. The V18 version is beta and downloaded from Adobe to try to resolve this ongoing problem. He has not solved it. By trial and error, I have established
-
Since an incompetent technician clear my settings from mozilla, I get up to a page of useless information about the sender and want to know how to prevent it. I can't copy / paste an example, but there are things like x-vipre scanned. x-uidl, x-accou
-
After Firefox 13 update of Gmail and Twitter does not
I've updated to Firefox 13 and now Gmail and Twitter are very slow or not to load any. I've updated my plugins, I cleared the cache and cookies. What can I do else? Thank you.
-
How to connect nokia 6300 on windows xp desktop using bluetooth/nokia suite
I am trying to record everything on my laptop to my pc (windows xp desktop) using nokia suite. Mobile is a nokia 6300 & I designed in and then restore it on a Nokia identical or very similar. I tried to use a cable attached, but it tends to pick on
-
Showing extensions of files...?
When I view the files in a folder, I would like to see the extension of file (for example, .pdf) presented explicitly as part of the file name. How can I do this?