Newbie need help with the old graphics card Dell Dimension 2400

Similar Questions

• Need help with the new graphics card

  So my trusty GTX 555 is finally dying after 4 years and 10 000 + hours so I looked in an upgrade and heard the GTX 960 would be a good upgrade for an Alienware x 51 R1. So I got a PNY GeForce GTX 960 Amazon and installed but when I turn on my system it passes to the BIOS screen and is there for about a minute and a half and it beeps every 30 seconds after the screen came. After the minute and a half or two then goes to a black screen and says the brand and model of graphics card in the upper left corner for about 5 seconds, then he sits on a black screen. I did something wrong?

  If necessary system specs:
  330W POWER SUPPLY
  Intel Core i7 2600
  8 GB RAM
  Windows 7

  Have you updated the BIOS?

• Help with the new graphics card on old pc

  I have a dell dimension 3000 'ya I know sad' I would like to add a graphics card and a new soft power since the wife won't let me buy a new PC GRRRR

  I have a GeForce 6200 PCI 256 MB dcr2 it will work in this pc

  I also bought a power electric double w 480 SATAs is large enough to run the new card and the pc?

  Thank you

  You can add the 6200 PCI if you wish.  It does not require an upgrade of the power supply however.  It will work fine on your PSU 250 watts.  I have the 6200 circulating in a Dell with a 250W unit just to get the higher resolutions than the integrated graphic card has been able to provide in support of a monitor.

• Newbie needs help with the new system specs!

  I need to upgrade my system to my work because of the need to begin to use Camtasia and Premiere Pro CS6 (as well as other elements CS6).  I'm not a computer expert and the machine below will be set up for me next week.  I have a few questions that I had grealtly appreciate any feedback on:

  1. Do you think that in general my new system specifications are not enough for basic audio/video editing of SD and HD material?
  2. Can I expect a significant increase in the quality of video playback, as well as a reduction in the time of video rendering while you use Camtasia and Premiere Pro?
  3. Is my diet is going to be enough for the specifications below and if not what is the danger of not leveling who?
  4. If there is some thing/nothing else I had to upgrade what would it be?

  I work for a retail tile distrubtor with about 130 employees.  Training videos, that I create are mostly screenshot simple and basic videos that do not require a TON of high-end editing.  I use a lot of images JPEG high resolution and basic SD video sequences captured from a camcorder Canon GL2 (Mini DV cassettes).  Us will modernize ends up the camera, but that's what I use now.

  The previous computer I had suffered with very choppy video playback and long video rendering times and so I convinced my boss and IT Manager needs an improved system that has a faster processor, a better video card and more RAM.  I used my old system this year and the other takes place next week, is listed below.

  Thanks a TON for anyone who feels inclined to provide information!

  Andrew

  New system:

  HP Compaq Elite 8300

  • Win 7 64 - bit operating system
  • CPU i7-3770
    • 3.4 GHz
    • 8 MB Cache
    • 4 cores
  • Quadro 2000 D (62 watt max current absorbed) graphic card
  • 12 GB of RAM (4 GB statndard, added two other cards of 4 GB)
  • 1 TB SATA hard drive 7200 RPM
  • Intel Q77 Express Chipset
  • 320 watts power (stock)

  Old system:

  HP Compaq 4000 Pro (small size)

  • Win 7 64 - bit operating system
  • Processor Pentium Dual Core E6600
    • 3.06 GHz
    • ? MB Cache
    • 2 carrots
  • NVIDIA NVS 300 Graphics Card
  • 8 GB of RAM (4 GB statndard, added a card of 4 GB more)
  • 457 GB hard drive
  • ? Chipset

  Added CPU, system, a couple of USB devices fans cooler fans, etc.

  I did the calculation with an i7-3770 stock, 3 sticks of RAM, a graphics Quadro 2000, 2 USB, 2 x 120 mm, SATA 2 x 7200 RPM drives fans devices, 1 DVD burner, 30% capacitor aging and a 100% load system and come to this:

  

  There is no room for manoeuvre for any expansion at all. Not even add more USB devices.

• Need help with the old game

  I have a windows 7 kind of old laptop hp, recently I tried to play an old game I used to play on this laptop (bastion) and he used open. It brings me to the opening screen I click on play and it disappears, someone knows how to fix this? IM really disappointed in this topic lol I'd appreciate any help, thanks.

  If this game used to run OK and now do not, it can be linked to this problem - 't-launch-on-windows-7-desktop-pc/880013f8-de9a-42b4-95e0-950aadb08a5f http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/program-doesn whatever it is, it won't take long to check.

  Some older games used a system of disk protection than a later update of Microsoft off. IF this is the cause, this is you need to uninstall the update and the apparent security risk, or make up a batch file in the sense of that which is specified in the link above.

• Need help with the basic graphics

  Hi all

  I started trying to familiarize themselves with the development on the Blackberry. It seems

  easy just use the standard of review, but becomes frustrating when I try to

  paint the screen exclusively from the Graphics object.

  My test program extends from the screen. The screen has a background

  and the moving objects, but flickers (at least in the Blackberry JDE 4.7).

  The flicker is reduced more when I work with the Graphics object

  directly. If I write an object buffer Bitmap, drawBitmap back to the

  main screens, flickering Graphics object is ridiculous.

  I've seen other discussions where people told of using MIDlets or extend from BlackBerryCanvas or GameCanvas.

  Try one of those who seems to make everything harder than it should be.

  Is there a single best way to do a screen play?

  Pointers, links, tips, samples,... would be greatly appreciated.

  Thank you!

  Hi, I had the same problem with twinkle. What you need to do is to synchronize threads. and the problem disappeared!

  Kind regards

• BlackBerry Smartphones need help with the new sim card

  I don't know why I have such a hard time finding how to do this. It's really making me feel like a * beep * here, so any help will be appreciated

  I'm on Sprint here in the United States and I'm on a trip to Romania in a few weeks and I wanted to have my phone all set up in advance. I bought a prepaid SIM Vodafone Romania, and told me that it is active and active international roaming. I tried it in 2 unlocked bolding my 9930 current and my old 9650. All I get is SOS and emergency calling only, both on AT & T or T-Mobile. I can't yet figure out how to get the phone number attached to the card. What's on the map with that he came are BPUK PIN and PUK. And I can't record with MyVodafone on their website without the phone number. I don't really know how to proceed. I was hoping to use SMS in roaming here until I leave.

  Thanks in advance...

  I was able to get the activated through e-mails with vodafone SIM. Just post here my solution in case anyone has the same problem.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.