Newbie problems with getting a local server from the BFC set

Similar Questions

• The network connectivity status appears as only 'Local' error message ' there may be a problem with your domain name server (DNS) configuration "when trying to diagnose the problem.

  Original title: connection internet wireless Sony Vaio problems

  I get connection "local only" and then when I try to diagnose and repair he said: "it may be a problem with your domain name server (DNS) configuration. He said that this problem cannot be fixed automatically and I have no idea what to do.

  How do you connect to the Internet (method/ISP)? What is a stand-alone computer or a corporate work station? What is the status of virus/malware of the machine? Please give us more details so that we can help you.

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting Internet connectivity

  1 answer to the first and second troubleshooting Questions:

  First Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Many variants of malware will allow a proxy server if you are unable to Internet. Go to control panel > Internet Options > connectivity tab > LAN button. If all is selected in the section Server Proxy, uncheck the box, apply/OK outside.

  2. If nothing has changed and that the computer is clean, what antivirus/security programs are you running? Have AVG 8 or Zone Alarm? These two programs have had updates that caused Internet connectivity problems. I don't recommend either of these programs, but if you want to keep check them on the mftrs.' support websites.

  3. If #2 is not applicable:

  a. unplug the router.
  b. disconnect the modem. (If you have a DOCSIS 3 modem with battery backup, press the Reset button to reset the modem so the lights go out).
  c. wait 60 seconds.
  d. plug the modem (or wait until the reboot is completed) and expect that all the lights are on.
  e. plug the router and wait until all lights are on.

  You now have an Internet connection? Otherwise:

  4. connect your computer directly to the cable/DSL modem. You now have an Internet connection? If so, there is a problem with the router. They do not last forever. Replace it.

  If there is no Internet when your computer is connected directly to the cable/DSL modem, call your ISP because something is wrong with the cable/DSL modem or your Internet service.

  MS - MVP - Elephant Boy computers - don't panic!

• Someone at - he had or having problems with getting nVidia NVS 450 working resolution?

  Hi all

  We got a new C20 with a nvidia NVS 450 card - and a $ monitor. The C20 has Windows 7 preinstalled; the out-of-the-box resolution is 640 x 480 and we couldn't make it go higher than that! The $ and the video card are connected via the DisplayPort cable that came with the unit. After you have reinstalled the video card driver that comes with the unit (on a CD containing drivers for Windows and Linux), we could never get to go beyond 640 x 480 resolution. We left thinking that it must be a quirk with Windows 7. We were going to install Linux on the C20 anyway, so we moved on this.

  We installed Fedora 14 (64-bit) install the video driver nvidia who was on the CD and cannot get the display resolution greater than 640 x 480. After a few days of tests n errors referring to various online forums, we have successful get resolution up to 800 x 600, but not the expected 1900 - something resolution the $ and video card holders.

  Someone at - he had problems with getting the resolution of the video card to work? If so, were you able to solve the problem? We thought we would start here instead to call Lenovo support first, because usually technical questions, we get smarter than over-the-phone responses. Also, waiting for answers on a forum is less frustrating than the vote by phone.

  Chris

  Thank you for your response.

  I had the chance to get their hands on another monitor, and when I plugged that, I got the full resolution. After a lot of testing, I decided that it was a faulty monitor and it had nothing to do with the video card. I finally got a replacement screen for the one who wasn't giving me the full resolution.

  Subsequently, I went ahead and got the latest drivers nvidia on their Web site. Everything works fine now.

• Problems with getting new Eclipse environment is fully functioning.

  I have problems of implementation of the new Eclipse environment that RIM showed at the DevCon.

  Problems:

  -API docs are different from the JDE 5.0.0.  They lack all the stuff of OpenGL ES.

  -The Simulator for 9550 does not appear.

  -How can I get the reloading of the my app without stopping the Simulator work?

  I installed the following items, in this order:

  -BlackBerryJDE5.0.0.exe

  -V3.5.1). Galileo (eclipse-java-galileo-SR1 - Win32.zip)

  BlackBerry_JDE_PluginFull_1.1.1.200911020017 - 11.exe

  -BlackBerry_Simulators_5.0.0.334_9550.exe

  Thank you for the time spent.

  The 5.0 SDK BlackBerry Java plug-in for Eclipse is beta 4, while the BlackBerry JDE beta 5.  The Eclipse plugin currently has an older version of the API of BlackBerry set, which does not include the classes of OpengGLES.  See update in my next post.

  You must close the BlackBerry smartphone Simulator during reconstruction and debug your application.  This is mandatory for all current BlackBerry smartphone simulators.  Update an application without having to restart the Simulator part of a later version.

• So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  original title: incorrect Homegroup password

  So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  All computers:
  Have enabled IPv6
  Use Microsoft Security Essentials with the last update
  Are connected to the same router (Linksys WRT54GX2)
  Have no other third-party firewalls or AV installed and have been neatly eliminated via their respective tools when they had their
  Can be seen in the network and can access any other files via 'network '.
  Have the correct date and time and are all in sync with time.nist.gov.
  Have the same network sharing settings (network discovery on, files and printers sharing folders public, sharing, streaming, wide, 128-bit encryption, sharing password protected, to allow windows to manage the homegroup connections)
  Network is set at home, not in public

  The computer that has implemented the homegroup is connected via ethernet to the router while other computers use to access the router 802.11 g I tried to delete and redo the residential group as well.

  Despite all this, it is said that the homegroup password is incorrect for both netbooks (where it says it has encountered an error). I realize that it is case sensitive and I entered the password correctly. I also ran the resolution of the problems of the homegroup on all 3 machines and still no luck. I also tried to change the password and restarting of machines.

  Any suggestions? I was _really_ hoping it will work right out of the box. Maybe it's something with the router? I don't really know. Any help is appreciated. Merry Christmas! : D

  Hello

  check out this link.

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

• Im having problems with getting my sound to work on windows 7 RC 7100 32 bit I tried to use 2 soundcards.

  original title: Audio does not work

  Problems of sound in windows 7

  Hey all. Thanks in advance for any time you spend to help me.

  Im having problems with getting my sound to work on windows 7 RC 7100 32 bit
  I tried to use 2 soundcards.

  1: creative X - FI Extreme
  for creative people, I tried using drivers creative Beats, creative version drivers and vista 32-bit drivers with no luck.

  2: its integrated with Intel DP35DP motherboard card
  7 drivers are available for intel sound I used vista 32 bit since no windows drivers.

  I have 3 device failed in the Device Manager. Simple PCI controller, peripheral Audio communications of high definition, Microsoft makes confidence audio drivers.

  the 3 rooms of this note.

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  with or without pilots the warrning does not change.

  System Spec.

  Card mother Intel DP35DP
  3 GB ram
  Core 2 duo E8400 with
  ASUS Nvidia Geforce 8800gt
  Creative X - FI extreme pci / Intel integrated audio system
  Termaltake 600 watt Toughpower supply
  Pioneer dvd Sata burner

  Managed to solve this problem by installing the 64-bit windows 7 instead of 32 bits.

  not sure why the sound failed. but now its fixed.

• Registry files have been deleted via a Norton 360 3.0 registry clean up - can't get an ip address from the router

  I'm running Vista Ultimate, -connection (Ethernet) with Verizon FIOS I ran a Norton registry clean and foolishly trust what he says to remove.

  At first, all of my USB cards have been screwed up (noted in the Device Manager with exclamation next to each one points)
  I did a system restore and that corrects this problem, but now I'm having a problem with my network card.
  , All diagnostic tests, etc. show that the material is very good. My router is also fine the problem is that windows can't get an IP address from the router and then assigns his own
  (a # 169 instead of a # 192)
  In the network connection properties, it says that the device is functioning correctly, and the driver is up-to-date.
  'Connection speed' tab: a window of diagnosstics is: I ran testto test adapters connect to connect to the network.
  Results: connection Test
  Test details:

  I have "this card is configured to obtain an IP address automatically. No DHCP server is present on the network. Windows selected an IP address by using the alternative private IP addressing. »

  X "Ping 0.0.0.0 Gateway: failure.
  !  "No DNS server is available for this connection.
  ! "No WINS server is available for this computer.
  X "Ping 0.0.0.0 network: failure.
  ------------------- -------------------------------------------------------------------------------------------------------------
  In this same window of diagnostics under the "LinksTab".
  Link current test status: (what is determine the current connection speed of the adapter and link partner)
  Results:
  ! The adapter is configured to negotiate the speed with the link partner, but 1000 Mbps was chosen as one of the possible speeds.

  The best link options-results of the speed test:
  ! Could not detect way reliable speed and duplex settings. Possible speed/duplex settings are 100 Mbps Full Duplex and Half Duplex 100.
  (Note that these link tests are online and I can't online)

  Also in the Diagnostics window-under the 'Cable' link cable - past-polarity is normal.
  Depending on the tab is the Hardware tab
  Hardware diagnostics check for I/O conflicts...
  Results: all the tests:
  EEPROM test
  FIFO test
  Test register
  Interruption of the tests
  Loopback test

  I also went in the prompt type in IPCONFIG... c which shows:
  Ethernet connection to the Local network card:
  ConnectionSpecific DNS suffix: (it's completely empty here)
  Link-local IPv6 address: fe80::bda9:951 d: 619f:a0dc 9%
  Autoconfiguration IPv4 address: 169.254.160.220
  Subnet mask: 255.255.0.0
  Default Gateway: 0.0.0.0

  I also have a sort of ping command here-cant remember the command, but the results were in the CBS... I didn't know how to reach. He however escape from something on the registry files.

  I went throughD-Link Tech router (router) support is good, Fios Tech support everything set up right, - Norton support(Norton denies that the files were not to be touched-although their report shows these registry files were deleted)-Dell Tech support because my warranty missed 3 weeks ago - although I still have the "your Tech Support team until 2013 - which is valid only if you have a hardware warranty-made no sense sold me the car without. the engine - directed the FTC to bring a complaint about it - after I get this fixed number.

  I hope someone can help... by the way I get perfectly in line with my laptop - I know this isn't my router. I'm sure it's due to some registry files being moved-(j'ai eu deles de messages d'erreur indiquant que les fichiers de Registre ont été endommagées ou manquantes) what do I do now? No system restore to restore this part of the register - I also installed the drivers from the dell drivers and Utilities disc - but maybe I've done that correctly? I put the disc - extract files-(he says they have been unpacked) was a new step for me to do after that? Help, please!
  Thank you!

  Hello
   
  We recommend that you install the router (see its manual) and the pilot of NIC once more and check the difference. In the first post, you mentioned that you decompressed or extracted files. Once the files are extracted, you will be asked to install the driver. However if you do not receive any prompts for the driver, then you will need to locate the destination folder where the files are checked to find the configuration file.
  
  Open the destination folder where the files are extracted and run the Setup file to complete the installation.
   
  To download and install the latest network card driver, visit the site Web of the manufacturer of the device or system.
   
  For more information on downloading and installing the drivers, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware
   
  I hope this helps.
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Connect with * address email is removed from the privacy * is blocked

  There was a problem with the song in my account (* address email is removed from the privacy *) a week before. He has temporarily blocked because of some spam massages. but I had recovered the use of password reset code.
  Now, I had this massage
  Connect with * address email is removed from the privacy * is blocked

  • Someone has entered the password wrong too many times.
  • If you registered for this ID through an organization, you will not be able to use the account again

  I got the link for the reset several times and I have reset the password but whenever I try to sing in. I use to get the same massage. What can I do to recover my account. He is my school and counts deal with work. I need to return, please help me

  This forum is for posting comments on Microsoft Answers web site, not to any other technical questions.

  For me it looks like you're talking about a Windows Live ID.  Questions about who belongs in the center of Windows Live Windows Live ID Portalsolutions.

• I get about one second from the previous movie when the scene selection in the menu of the DVD

  I have PE 12 for mac and have a 21.5 "iMac with 4 GB RAM and 1 TB hard drive.  I asked questions on here before all of a DV footage.

  I have a delay of 1 hour, 20 minutes and used markers to scene to go to the cinema in the timeline panel.  There are 11 movies in the video.  Markers are at the beginning of the scene in question.  On some of the later scenes, I get about one second from the previous movie before the start of the current movie.  I did thorough tests 12 EP in order get my imported correctly DV film.  I finally decided to use LifeFlix to get the imported records.  When I was testing the creation of DVD, I have not found this second of the previous film in the current issue of the film.  The problem seems to be that less pronounced during playback on my DVD than VLC Player or Apple's DVD player.  I use DVD Widescreen Dolby Preset for the DVD.  I did a DVD earlier using brands of menu with the result being 11 main menus.  I decided to abandon this approach.  Two DVDs have the same second or so of the previous clip before the current movie.

  I tried to stop markers in the DVD to recreate what I had with Pinnacle Studio, but this resulted in a DVD with a 'mistake' at the stage of decision-making case and record a DVD with menus blacks half but for the buttons.  I had added some empty frames between scenes when adding the judgment of brands, such as advised by ATR, but this failed.

  I would like to use markers to stop it again, but the problem of the second or last if a clip is more pressing.  The previous screen is sometimes less than a second and has no picture, just sound.

  Never had this problem with my old program.

  I also had "Unknown error 2131042562" when writing a normal DVD with the project and the checkbox "adjust to the content of the available space." checked.  I also got this when trying to write on a normal DVD - RW disc, to test the DVD for 'Previous film' problem as stated above.

  My burner is a USB 3 Litton Blu - ray burner.  It worked without a problem since I bought it.  I also used TDK DVD that I used for a number of years without any problems at all.  Today I wrote a data DVD without any problem.  I also wrote the content of a DVD folder on the disc, after generating an image using disk utility and it worked successfully, I realized the same DVD using the software 'Burn' successfully.

  Again, I have never had such problems in the display of the videos on DVD before.

  Your help is very appreciated.

  I managed to get a DVD with 5 images of black video between the scenes I wanted.  Video of Black made sure the brands menu worked!  Started it at the beginning of the relevant scenes.  I've never had to do this before in any program.

  Add stop markers did not.  Brands menu would go up to a point half a second or a second before the required stage, as have no black video.  I tried all sorts of things to resolve this, even to copy the project using the project archiver and the opening of the copy, but nothing helped.  I don't really know how ATR has managed to get markers to stop working.  I even added 12 frames of black video between frames with markers of the judgment at the beginning of the black video and the marker of the scene at the end.  It did not work.  I have nothing out.  The program seems to create a folder, but there is no error message and no file at the end.  He writes date folder much faster than normal when using markers of the judgment.  Also do not work 12 images of the video I think.

  I gave up at stop markers.  The normal use of the menus seems OK.  Other programs like Apple Compressor have this type of menu structure.

  Note the use of 5 images of the black video locks marks menu successfully.

• Error: "C:\Program Files/reviversoft\Registry Reviver\unins000.msg"is missing." "Fix the problem or get a new copy of the program.

  Original title: cannot start computer

  Cannot start computer

  This response comes and does not let me start the computer (Message missing file 'C:\Program Files/reviversoft\Registry Reviver\unins000.msg "is. Fix the problem or get a new copy of the program) what should I do to get the computer?

  Hi Dan Maarsman,.
   
  -Did you change on your computer before this problem?
  -Do you have any third party registry cleaner program installed on your computer?
   

  Start your computer Safe Mode and check if you can successfully start.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  For more information, see:

  A description of the options to start in Windows XP Mode

• I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  Thanks Ray,

  Hello... How can I get the manual download for all the error on any printer laser color spray top of HP range.

  Kind regards

  Monday Nwankwo

• After 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear

  Hello, after 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear... what should I do? Help, I don't want to say 'goodbye' to it already... Thank you

  It could be the plug on the computer that is the cause of the problem. Try another helmet or a pair of speakers in it.

  If you hear only on one side, who will tell you that is the question.

  If you hear from both sides, you must obtain a new helmet

  Software will fix either of the foregoing...

• Cannot print and get an error message from the printer saying to close the scanner cover

  Original title: I can't seem to print on my Epson Workforce 845.

  I can't print from my computer running Windows 7 Home. I get an error message from the printer telling me to close the scanner cover. I can print without problem of my computer running Windows 7 Enterprise.

  Hello

  (1) is your computer connected to a network?

  (2) did you of recent changes to the computer before the show?

  (3) what is the exact error message?

  You can run the troubleshooter printer on the computer that faces the question and check if it solves.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also consult the following articles and check if it helps to solve the problem.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Install a printer: http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  For any further assistance, I'd contact Epson printer manufacture support.

  Here is the link: http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=184583&infoType=overview

• I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the safe mode and still no success. Help, please.

  Question
  I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the mode 5 firefox safe and always without success. Help, please

  To help other users find solutions, please come back to this Thread and connect you to the
  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• I don't know why I had problems with FF 3.6.16 and the last update for thunderbird

  I'm at the Canada and for some reason, downloads for the two FF 3.6.12 and Thunderbird was last updated was the BritishVersions is why I UK search engines, not the US versions is maybe why I'm struggling with my email and addons. The other 2 computers in my house is the American version.

  But there is always something a bit screwey with 3.6.12 that some addons do not work correctly on other computers. Can you please change the software for the US version please? Thank you

  I deleted the software twice already. before realizing I was downloading the British version... same problem with my Thunderbird cannot connect to the Internet service provider even if everything is done correctly! Help!

  You can find the version en here:

  • http://www.Mozilla.com/en-us/Firefox/all.html
  • http://www.mozillamessaging.com/en-us/Thunderbird/all.html