newbie question about obtaining work web interface 3424 and 3448

Similar Questions

• How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  Feel free to change the title

  How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  You're talking about Facebook?

  Try the gyration of the Secure Browsing

  http://www.Facebook.com/help?page=1079

• newbie on getting interface question web work 3424 and 3448 (remailers)

  Hello - I'm over sale of this announcement because the situation has changed.

  We are a church and we try to expand our network.  the requirements are to install a public thread-access point (WAP) on port E1 and E2-48 ports to be part of a community for the Church Office staff.

  We do not want anyone on the E1 - WAP to access what anyone at the Church Office.   I have a configuration below script that works very well to meet our requirements, but as soon as I run one of the following commands, I'm more able to access the unit via a Web page:

  whenever I run one of the following commands:

  Switchport mode private - vlan community
  switchport mode private vlan isolated

  I'm more able to use Web page interface.

  Here is the script I used to set up our unit 3448 so far:

  Enable
  Configure
  interface vlan 1
  IP address 192.168.0.250/24
  output
  Default IP gateway 192.168.0.1
  username admin password admin level 15
  database of VLAN
  VLAN 1000
  output
  interface vlan 1000
  private - vlan primary school
  private - vlan community add 10
  private - vlan isolated 20
  serial interface ethernet e2, e4
  e2-48 ethernet serial interface
  Switchport mode private - vlan community
  switchport private vlan community 10
  e1 ethernet interface
  switchport mode private vlan isolated
  switchport private - vlan isolated 1000
  g4 ethernet interface
  switchport mode private - vlan promiscuity
  switchport private - vlan 1000 promiscuity

  with this script, I can continue to ping from any port E2 by E48 and no port 1.  I am also unable to ping any other port than port E1 according to the needs.   but I still need to be able to access the web interface of * ANY * port.

  Yes, that sounds like a good plan to use teamviewer to access it remotely. On the other hand love IE, the switch was released in 2005.

• No works Web interface access vlan but ping

  I have an ISA570 and SG300 in L3 mode setup with 3 vlan

  Vlan1 is default (192.168.1.x/255.255.255.0)

  VLAN2 is invited (192.168.25.x/255.255.255.0)

  VLAN10 is workstations (192.168.10.x/255.255.255.0)

  When I connect to the VLAN1 network I can access the Web interface of the router at 192.168.1.1 very well and also to 192.168.10.1

  Soon I connect to VLAN10 I ping the router 192.168.1.1 and 192.168.10.1 but I can't access the Web interface?

  In the ISA570 ACL rules

  VLAN10 is allowed access to all other VLANs or WAN

  VLAN2 is allowed access to WAN

  The SG300 switch is 192.168.1.2 VLAN1 or 192.168.10.2 in VLAN10 and can also ping the router 192.168.1.1 and 192.168.10.1

  Thank you...

  192.168.10.X is allowed for Remote Administration?

  Michael

  Please note all useful posts

• Consider purchase of Wacom Cintiq 27 HD Touch - Questions about the tactile feature in Photoshop and Lightroom

  I'm considering buying a 27 HD Touch of Wacom Cintiq monitor. I have a few questions about the two programs Adobe and their use of the 'touch' feature - Photoshop CS6 and Lightroom 5.7 running on Windows 7.

  1 problems related to touch a feature in Lightroom and Photoshop CS6 and 5 resolved that you see on the forums of Wacom a year ago?

  2. If so, is there sufficient value gained through the tactile feature in Photoshop CS6 and Lightroom 5 to justify the $500 price difference between the Cintiq 27 HD vs Touch HD? (I realize that this is a subjective question based on the abundance of its cash).

  3. I intend to stay with CS6 as long as possible to avoid a monthly subscription, BUT I wonder if buy the Touch HD can provide additional key features in future releases of these products that do not exist currently. (It is a pie in the kind of sky in question).

  Thank you!

  Kent

  Support for Photoshop Touch is added by CC 2014.2.2.  However as the Pro Intuos Wacom tablets with touch can be used with earlier versions of Photoshop and the Wacom Tablets Configurator can custom features can be used with Photoshop touch tablets.  I use LR but I don't know that the same thing would be true for her. You can configure the setting for many applications. The device driver knows which application its interfacing with and uses the parameter set for each...

  I have disable most of touch when using Photoshop.  The main reason why I have a Tablet is Photoshop Brush tools. Like Eraser, clone stamp, etc, nothing is better then a pen when it come to create the layer mask.  For most programs, I always use a mouse and I use the keyboard, the mouse and the pen with Photoshop...

  I never wanted a Cintig I do not have my hand between my eyes and the work. I'm not an artist.

• Where can I ask a handful of general order questions about Firefox OS as a consumer and get the answers? (a forum or something similar)

  I have about seven questions about Firefox OS. I'm potentially interested in opting for a tablet that works instead of Android or iOS. I couldn't find a place to ask questions like that. Thank you!

  https://support.Mozilla.org/en-us/forums/Firefox-OS-English-Forum

  There is another option.

• Questions about an average of response spectrum and frequency of feeding mode.

  Hello

  I have a few questions about an average of mode. When I generate a sinusoidal signal from one output to two input channels channel to see if my DAQ card works well and vector averaged in the power spectrum for DFT, the amplitudes was different from the previous one of the amplitude, which was supposed to be 1 v peak. They range from 0.5 v to 0.6 v peak. When the calculation of the average model is RMS, the amplitudes were close to 1. I wonder what are the fomulas of RMS and average vector. Does that mean that I could not accurate if I use an average of vector? In a time of frequency response, why I coherences of difference and the amplitudes using the vector and the mean quadratic value?

  Thank you

  Ningyu

  rico1985,

  The differences in modes of generation are as they sound: 1 sample output only a sample writing, N samples will be released however many samples configure you for each entry, and the continuous samples released samples continuously until a specified user action happens (you press the stop button or a logic that you created gets fulfulled). The range of Signal output allows you to set a ceiling high and low level of your output signal and it only affects the quality keeping in this beach. Timing to set a deadline for the time between the acquisition of the sample. If a new sample becomes unavailable before the timeout setting, you will get an error. This is useful for looking at a network, because if the network goes down and you stop getting data from a machine and then you would like to know about it. I point you to those videos that are short tutorials on how to make the most of these actions in SignalExpress.The SignalExpress 3.0 Help file is also your first point of contact for all your questions on getting started. These two resources should get you up and running in SignalExpress in no time. (either by the way all your questions answered using these resources) Bravo!

• Three questions about the version of the hardware and VM tools

  Hello

  I have 3 questions about equipment and tools of VM version, can someone help? Thank you in advance.

  1. is the machine hardware version virtual file OVF/EGGS associated with?  OVF/EGGS exported vSphere files contain the virtual hardware version information?

  2. review I have a VM in vSphere 6.0 platform with version 11 of hardware and the latest Tools (cam with ESXi 6.0 U2) VM, I can export to an EGG file, then import it on vSphere 5.1 platform? If can, what version of the target material is VM?

  3. can you vmtools high version with lower vSphere platform? For example, I have a virtual machine with version 11 of material and tools the latest VM (ESXi 6 U2), later I move the 5.1 ESXi virtual computer, should I go down the vmware tools? Is there a compatibility issue?

  Hello

  1. Yes, if you unzip the eggs and open the FVO in an editor you see:

  Family of virtual hardware

  0

  VMX-08

  2. you can not. Vmware 11 material is not supported by 5.1.

  3 didn't cause you cannot import vmware 11 and 5.1. Works may be more high vmtools as long as you keep the material support for 5.1 version.

  

  Best regards

• A question about the order of COLUMN sqlplus and PL/SQL

  Hello everyone.
  
  
  
  I would like to ask a question about sqlplus command COLUMN that I use in order to define the length of my queries of output columns. So, for example, I run something like:
  

  COLUMN market FORMAT a20

  That is why any column with the name 'the market' will be composed by sqlplus as 20 characters.
  
  Currently I'm working on a PL/SQL script that makes this automatic procedure, in other words, instead of manually write for each column in the above COLUMN order, it uses the DBMS_SQL. He read first as input the name of the table and then inside a loop, it detects the maximum length.
  
  For those interested, here is the Oracle documentation page that I found (example 8)
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_sql.htm
  
  If everything worked well enough I managed to recover the maximum of each column in my table length, except that I don't know how to use the COLUMN sqlplus command in my PL/SQL block. I would like to do something like that (it's just a pseudo-code)
  

  FOR colIndex in 1 .. numberOfColumns LOOP
          currentColumnName = getColumnName(tableDescriptionObject, colIndex);
          currentColumnLength = getColumnLength(tableDescriptionObject, colIndex);
          
          COLUMN  currentColumnName FORMAT a -- and here after 'FORMAT a' I have to write currentColumnLenth but I don't know how to proceed.
  
  END LOOP;

  I would like to know is there a command in PL/SQL to define the appropriate column typeset in sqlplus length?
  
  
  Thanks in advance,
  Dariyoosh

  Hi, Dariyoosh,

  Sory, I don't think that there is a simple way to publish SQL * most orders fom PL/SQL.
  PL/SQL runs in the database (back-end); There isn't any direct contact with SQL * more at the front end.

  The best way I know is that PL/SQL script (myfile.sql) with orders of the COLUMN, and then have SQL * more run the script (@myfile).

• Suggestions and Questions about the upgrade my Hardrive Mac and Ram.

  Hi This is my first time asking something in the forums. (At least I think) Well anyway, I got the Macbook Pro Mid 2012 13 "with the retina also runs the OS El captain. I do computer for school and sometimes animation video editing and ive noticed some performance as my projects get bigger and bigger issues. I want to improve my mac, but I'm not very tech savy and don't want to do something useless, so I had a few questions, I wanted to ask you.

  Do I need for my hard drive and my Ram?

  What effect will the upgrade of my Ram and what effect will be upgrading my hard drive with an SSD?

  I saw this SSD online and thought of novice opion that sounds get Id more bang for my buck (link) with her. Is this good? What more to kill? WiIll it still works? Could you suggest some other good affordable options?

  My next question if I decide to upgrade my Ram can provide you with some good affordable links to buy of new RAM sticks, is also 8 GB, the best he can do?

  My next question I watched a few videos online and by installing the updates level looks really easy and fast. But I use bootcamp (to play games sometimes), and I wanted to know if I save my files on my drive as ive seen people do videos, (something to wipe the drive and put it back in after installing updates) will be I lose my windows 7, I lost the disc to reinstall and he check so I really want to buy a new also do not want to lose the things I put in memory.

  From the retina MacBooks you is impossible to pass the ram as it is soldered to the logic board. As with the hard drive, it's just a card ssd and you can't get those anywhere because their hard to find.

• Newbe question about the network configuration of ESXi 3.5

  I have ESXi 3.5 works well on a Dell Poweredge T300 server.  I want to connect a Netgear ReadyNas Pro Business Edition for this Dell and connect by iscsi.

  I want to connect 1 network card of the ReadyNas for 1 network card on the Dell printer.

  My question is on the Dell when I go to the ESXi server and customize by pressing F2 and goto network settings I see the following:

  X vmnic0 embeeded nic1

  NIC2 integrated vmnic1 used by vswitch1

  I'm may be thick but can you explain what NIC on the ESXi server is used for access interenet and I need to configure for iscsi?  I thought that it should be obvious, but it is vmnic0 or vmnic1?

  Your ESXi host has two vswitchs configured what uplinks to physical NIC in the system.

  vSwitch0 what uplinks to vmnic0 (who, although a red x, indicating a problem seems to be very well) this vswitch holds you management interface (IP 192.168.2.107) and a portgroup of VM for your virtual machines. You also have an another vswitch vswitch1 what uplinks to GB NIC vmnic1. This vswitch has unused virtual machine port group. Also a VLAN ID has been set for this vswitch which would lead me to believe that VST is / was operating on that host in the past.

  Haven't you set up this? If this isn't the case, I would get with one who did.

  Order "the great vSwitch debate" parts 1 and 2 to start.

  http://kensvirtualreality.WordPress.com/2009/03/29/the-great-vswitch-debate-part-1/

• question about obtaining a specific version of the Skype client

  Hello world

  I was using Skype on my desktop for a few months with the version number 7.26.64.101.

  It works very well for me and I can't remember where I downloaded this version.

  This morning, I did an upgrade of the manual system of my office, and it seems that Skype has been also upgraded to version 7.27.xx.xx.

  Anyone know where I can get this version of the Skype client?

  And another question is, what the third number (64) the version number means?

  It seems that the version number of the official client is always (0) that is downloaded from the official site.

  I looked through other threads and discovered that the third number is corresponds to some features or partner.

  So what is the version number means "64" for the case of 7.26.64.101?

  Thank you

  It doesn't mean ANYTHING. The only one which indicates that this number is a specific download server, nothing else.

• Question about Intel 82801FBM LPC Interface Controller in a Tecra A3X

  I had to replace the HARD drive in an A3X. XP pro sp2 loaded fine and all is well, but the device mngr reports that Intel 82801FBM LPC Interface Controller as an unknown device.

  The Intel Chipset utility that identifies as a component of the Chipset 82915GM/GMS/910 GML

  I ran several times the Intel software update utility with no joy.

  I can find the pilot of the reference, but cannot find a download for it.

  As I said the laptop seems to work fine except for this unknown device.

  All suggestions greatly appreciated

  Hello

  "Don t go to the sea where you can fish from the coast" - cited the user from another forum who wrote this solution to your problem:

  (1) go to the Device Manager
  (2) right-click 82801
  (3) driver update
  (4) No, not this time-> according to
  (5) install from a location specifin-> next
  (6) research Don t I'll choose...-> next
  (7) in the box on the left choose Intel and the right scroll down until you meet to this strange 82801FMB...-> next

  It's her!

  Thanks to google. :)

  Welcome them

• Newbie question about executing script

  Hello world

  our company wants to publish a really nice magazine on iPad using InDesign and I must evaluate the solution.

  I read a few guides in Adobe PDF (great job btw), but I have a really important question to ask the experts among you: is it possible to customize a presentation to InDesign (with the target of the iPad in mind) to intercept, for example, a click from the user (that is, the reader of the magazine) and run a Javascript function.

  I understand that the InDesign scripting is used to customize the tool to automate the workflow etc. but can be used at the time of execution, during the actual presentation?

  I'm sorry if my question is obvious/naïve, I don't intend to spam the forums.

  My question was about the iPad and the type of magazine, you might

  Read about it (with the DPS), but I suspect that your answer is synonymous with

  This kind of content (which is not PDF), isn't?

  I'm not sure of DPS.

  You may need to ask in the forums DPS.

  And once again, for the PDF, it is not that there is no way to do it... just that there is no way to get him out of InDesign, you the user other tools (Acrobat).

• Questions about the work in real-time

  Hello.  Just a few questions on usage in real time, in fact on the swf file.

  First of all, I want to create something of a drag and drop interface.  Is it possible to have a stage act as two separate steps?  I mean, is it possible to have the left side of my step hold all the components, they are moved to the right side of the scene and placed anywhere, the user can then click on save, and only the right side of the scene is saved?

  Secondly, I'm testing a few things.  What I would do to get a type of free transform on an image on the stage in real time, in the swf file?  So once the movie is played, the user can resize any image then how they like by dragging a corner of the image...

  Cheers for any advice.

  You can use 2 container (Sprite or MovieClip) objects one on left on the right.  All display list container objects have their own scene

  jou can so easily the steps as much as you want each independently controlled placed anywhere you want.