Newbie question, object remains under all other objects on the layer?

Similar Questions

• The object 'before the layer' is not currently available

  Hi all

  I have a pretty complex thing that involves the mounting of batteries of 5 layers. Instead click on the individual image, since it records the name of file, I tried to use the shortcut keys Alt + [], or Alt +. /, as select the layer backward, front layer, layer of upper layer, respectively.

  It works well for the first action, but then after I tried the next day I get an error message saying 'the object 'before the layer' is not currently available.

  How can I avoid this action so I can continue to automate the batteries of my image?

  Thanks to anyone in advance.

  Alex

  Most likely, you will need to establish a starting point by clicking on a layer named common, as a background.

• I have an index page that does not correctly load the css and css works on all other pages of the site.

  http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
  http://www.boulderridgecondos.com/news.htm

  I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

  Any help or suggestion looking for something would be appreciated.

  This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

• I'm unable to open Add/Remove programs in the Control Panel, all other bits in the control panel can be opened.

  Add/Remove programs. I'm unable to open Add/Remove programs in the Control Panel, all other bits in the control panel can be opened. Any ideas? Thank you.

  original title: Add/Remove programs.

  Hi, Tay 13,

  Open command prompt window

  type the following command

  SFC/scannow

  Press enter

  Note: There is a space between SFC and / scannow

  Once the scan is complete, look for the journal by clicking Start > run

  Type

  %windir%\Logs\CBS

  Search for repaired files or cannot repair file and note the name of any file not repaired.

  New attempt to open Control Panel Add/Remove section.

  Open the command prompt window

  Type the following command

  appwiz.cpl

  Press enter

  This will open Add/Remove programs

• Host cannot communicate with all other nodes in the cluster virtual SAN allowed

  I get this error after you apply the latest patch:- http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2135115

  So all the hosts are now review: VMware ESXi, 6.0.0 3380124

  After the reboot, I get the error message on the host cannot communicate with all other nodes in the cluster active virtual san...

  However, the VSAN health check is green, 'get esxcli vsan cluster' shows all 6 members of the cluster ok... and if I reboot a crowd happens ok without the error... so if I reboot another host, it will come without the error... but then the host on which I rebooted before it displayed the error...?  So I can't ever get more than 1 host without the error after a reboot.

  I checked multicast that removes ok, in fact all of the checks in contradiction with the fact that why I get this error...

  Someone at - it ideas? Could this be the latest patch...

  Paul...

  Hello, this has been repeated here: 6.0 U1b - hosts cannot communicate thanks, Zach.

• After changing Windows 8.1 for Windows 10 my photoshop 6 is not working properly: layers styles cannot be applied to the objects in the layer

  After changing Windows 8.1 for Windows 10 my photoshop 6 working properly: layer styles can be applied to the object in the layer.

  Thanks much for the reply, thank you very much more useful.

  The letter appears to be part of the layer - not an object separate pixelated. One thing you could do is make a layer duplicated, select the letter and make a layer of the mask. Then you could add a style to the copy, and the rest of the initial layer will be hidden.

• Error "host cannot communicate with all other nodes in the cluster of enabeld VSAN.

  Hello community,

  We have a problem (?).

  We have a cluster VSAN enabled with four hosts. Everything seems perfect,

  -the configuration is good,

  -Displays the page state VSAN "network status: (green arrow) Normal."

  -Displays the disk management page "status: healthy" for all of our groups of disks.

  -Same 'esxcli vsan cluster get"on each host returns a 'HEALTHY '.

  But we have a yellow exclamation littly on each host 'host cannot communicate with all other nodes in the cluster of enabeld VSAN.

  Anyone with the same problem? Anyone with an idea or a hint?

  Thank you!

  Update vcenter to the latest version and the error disappears. Problem solved! The 'old' version of vcenter performed since September 2014, strange.

  Thank you very much for your help!

• My Wacom pen works with all other functions than the brush / pencil?

  My Wacom pen works with all other functions than the brush / pencil. He painted with the opposite end, the eraser to erase end? Does anyone have a suggestion what to do?

  Annette

  My husbond problem - I had somehow clicked away from the "normal" position Ooops!

• Network management problem, computer laptop Windows 7 will not find other computers on any network, however all other computers on the network can access Windows 7 laptop.

  Basically, the issue I'm having is that my laptop does not connect to any other computer to access the actions or other files.  Other computers on the network can access my computer laptop shares and files without any problems.  Operating system is Windows 7 Home Premium x 64.

  What I tried:

  restarted
  uninstalling and reinstalling the files and printers, sharing maps and restart after completion
  all disabled firewall
  tried with IPv6 enabled and disabled without change, so it is currently enabled
  tried on a Wi - Fi and the differences are listed below in the section work (work is wireless)
  able to ping other comptuers
  access to other computers is permitted by other computers

  problem extends over several networks, IE I noticed it at home last night and the followed problem my laptop at work this morning.
  The problem is slightly different on the two sites.

  At home:
  I can see the other computers on the network, but I am unable to access it, even if I have permission, but other computers can access to my laptop.

  At work:
  Cannot even find other computers on the network but they can find and access my laptop.

  I have worked on this problem of non stop for several hours and did much more than what is said, but I am unable to remember everything.  I should have been taking notes: P

  Here are the results of the ipconfig/all command (I removed the physical addresses for security reasons):

  Windows IP configuration

  Name of the host...: Radiation-G72
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : hsd1.ga.comcast.net.
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR928X Wireless Network adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::f4e3:cd1c:6952:eb4d % 11 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Thursday, February 4, 2010 10:50:32
  End of the lease...: Friday, February 5, 2010 08:29:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 234890707
  DHCPv6 DUID customer...: 00-01-00-01-12-4C-6E-91-00-25-D3-3D-FC-9A
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {1797D168-6FC8-4DDF-8338-4E214119C26D}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e74:4ea:2920:b81a:cdc5 (Preferred)
  Address IPv6 local link...: fe80::4ea:2920:b81a:cdc5% 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Asked this question in the Windows 7 forum also because the problem was between windows 7 and Vista.

  Hello

  If it has started, you can try a system restore - an update "might" have caused the problem.

  1. try a system restore back to a point before that happened. And immediately thereafter enter
  Control Panel - Windows updates - top left settings and set it to download and informs you instead
  Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
  to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
  and let this value - manually search for drivers when you think you need. (See how and why to)
  stop day of drivers below.)

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  To uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
  Updates installed - uninstall

  I had completely forgotten the system restore!  While looking into the system restore, I found that when I moved into my new House and has cable Internet installed, the cable technology installed a program of comcast on my computer.  This caused me to not be able to connect with other computers.  After rolling back to install it before it works!   Thank you.

• How to copy an instance for all other sites at the same time?

  Hi guys,.

  Just a question regarding the copy. When I for example change a line of code in my site index.html I want it to be implemented in all other sites. So I open each one and do a copy / paste. Is there a method of automatic implementation without manually copy and paste to various sites one by one ' cuz it is entirely of your time? See you soon.

  For NEW material in your pages within this site, you must use FIND of DW and feature REPLACE - to the favicon, you can FIND a code in the header of the document that is common to all pages, such as "" and REPLACE by "" followed by your code for links.  For any other code, you will find a few common starting point and replace it with a server-side include that contains the new code or with the new code directly, according to what might happen with this new code will in the future.

• Why my all-in-one printer HP Photosmart 4780 now only print all other lines of the document

  My printer was working fine two weeks ago and now he decided to print only all other lines and some lines that print also have a pale line through it runnung. I have Windows XP. I uninstalled and then reinstalled the printer but the problem is still there.

  This problem is now resolved. Again, I changed the black cartridge and now everything is ok. I threw the defective cartridge.

• Passage of objects in the layer of transaction model

  Hello.. my version of jdev is 11.1.1.5.0

  I want to move an object (value pair - key) for model layer (AM) for the transaction in view

  For example: emp = {id: id, name: name}

  And also I want to win back the output back to the view model layer in the same format.

  I have access to the data using callablestatement (cs.getString (1), cs.getString (2), etc. etc.). I don't prefer it because it creates confusion.

  Thank you

  If I were you I would do the following:

  Create a NEW method in the model at the level of the VO layer as you did before. This time the input parameter will be a map. Expose this new method in the client view interfaze. Then in your ViewController layer in your page to expose the method in the layer of links. Now, do the same thing you did with the employee, but this time he just create a HashMap example application map. Get it and you should be able to run without problem. It is said that in the previous post people make you with the card.

  Concerning

• Newbie Question, Ripple, Roll, something else?  What is the right tool?

  I learn Premiere Pro and struggling to find the right tool to use.  I have several short clips in an order and I want the Cup to the rhythm of the music of the time.  Is there a tool or the trim method I can use to adjust the end of clip and the beginning of the next clip, without affecting the start time of the first, or put an end to the second?  I hope that makes sense.  I have two clips, together they start to 1 sec, end to 5 dry and cut in 3 sec.  I want to pass the cup of 3 sec 4 sec and does not affect the beginning or the end of the two dry 1 and 5.  Thanks for any help!  I think I need to use the ripple or roll edit, but just not sure after having look at some tutorials and experimenting on my own.

  Thank you

  KYle

  Adobe Premiere Pro CS6

  Windows 7 64 bit

  Looks like you want the bearing Assembly. You can hold the CTRL key and move the mouse on the Assembly of the change by clip 1 and 2. the cursor must be red and have arrows pointing in both directions. Click and drag to change change it. This will change at the end of the clip 1, the beginning of the clip 2 (cut in 3 seconds in your example). but keep the beginning of the clip 1 and the end of the clip 2 and the duration of the two combined for your example of 5 seconds.   You can also use the trim edit mode, according to richard. Just hold the CTRL key to access the double red cursor arrows and then this time on Assembly changes. This opens the trim mode in the monitor and you can use the buttons in there to adjust the edict.

  a ripple editing will be cut extend clip 1 and move the clip two and all the other clips continued to fill the void backwards or forwards to make room for the long pliers 1. where you want to clip two endpoint to stay such as 5 seconds, it won't work. Ripple will change the location and duration of the two clips, 5 seconds in your example. CTRL and the yellow slider about to edition is this training mode.

  a regular edition trim does not move other clips, only the selected clip. However, it is not automatically expand or shrink the adjacent clip. leaving a space if the shrinkage.

• I am trying to record my Photoshop elements 8 product so that I can access my serial number.  Yet, when I go to the registry, the 'Record' Option is greyed out and I can't select.  All other options in the menu are available to be

  I am trying to record my Photoshop elements 8 product so that I can access my serial number.  Yet, when I go to the registry, the 'Record' Option is greyed out and I can't select.  All other menu options are available for selection.  I have a PC.

  He was already registered?  If so, how can the computers?

• activation of the 3D layer switch hiding all other layers in the timeline

  I activated the switch to 3D on one of my layers layer on my calendar of EI and makes all other layers disappear.  They are still on my calendar, but my composition window does not show anything except these layers so that I put the 3D switch.  Any thoughts as to what I'm missing here?  It's good to be something simple, but I can not understand...

  Looking for a custom view, front, top, left, right, and no Active camera. 2D layers do not appear in these views.