NI MAX with USB devices access violation

Similar Questions

• Big problems with USB devices

  Since I upgraded to El Capitan I have several, serious problems with USB devices:

  1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

  2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

  The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

  Hello Gulliver,

  It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

  I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

  Thank you for using communities of Apple Support.

  Sincerely.

• Problems with USB devices in Windows XP Mode on Windows 7 Pro

  I have a Palm Zire 21 that I use with ACT! Contact Manager to keep track of my appointments.  I was able to sync the Palm with my ACT database until this week. The device appears on the list of USB devices, but does not connect to Windows XP mode.

  I used this device in XP Mode since August without any problem.  Last week, I started having problems with the integration of XP features and had to uninstall and reinstall the integration features a few times.  I think I have a corrupted somewhere driver.

  Any help would be appreciated.

  No need to comment unless you have more insight.

  I solved the problem myself.  In XP mode, I went to the Device Manager and scroll down to USB controllers.  A virtualization USB bus drivers showed a problem.   I uninstalled this device and then managed to reinstall my Palm correctly after connecting it to the USB port, and then going back to the menu at the top of the XP USB mode screen and hit connect when I saw my camera.  The device connected in XP automatically and I was off to the races.

• Problem with enforcement of access violation of Skype at address 00420BB1 in module 'Skype.exe.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Skype
  • Error messages: Access violation at address 00420BB1 in module 'Skype.exe"address reading 00000006
  • Recent changes made to your computer: just do a system restore as the Skype froze while updating
  • What you have already tried to solve the problem: United Nations the Skype installed and reinstalled to see if it works, but it does not.

  Try the following Skype forums:

  Skype Support Forum: http://forum.voxilla.com/skype-support-forum/

  Other: http://forum.skype.com/index.php?act=idx

  Note: Suggest you stay with the first link.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• My program crashes in VIX with: reading location access violation

  Hello

  My c# program that uses the VIX API keeps crashing. I try to use VIX 1.2.6 to connect to ESXi 3.5.0.

  The accident usually seems to happen after I kick off a job and while I'm on hold so he could end with a call to IJob.Wait or IJob.WaitWithoutResults, or voting in a loop with a break by calling IJob.CheckCompletion.

  I received the following in the debugger:

  Unhandled exception at 0x068f58ba in MyProgram.exe: 0xC0000005: access reading location 0 violation x 00000008.

  Call stack:

  > gvmomi.dll! 068f58ba)

  http://frames below are may be incorrect and/or missing, no symbols loaded for gvmomi.dll

  gobject - 2.0.dll! 03e4718c)

  GLib - 2.0.dll! 04b4b0d8)

  GLib - 2.0.dll! 04b4b44e)

  gobject - 2.0.dll! 03e44f7f)

  gobject - 2.0.dll! 03e47926)

  VIX.dll! (11119135)

  VIX.dll! (11119150)

  VIX.dll! 111070ab)

  VIX.dll! 111079ca)

  VIX.dll! 1110394d)

  VIX.dll! 1115f23f)

  VIX.dll! 1115fa93)

  VIX.dll! 1110198d)

  VIX.dll! (11191380)

  Kernel32.dll! 7628d0e9)

  ntdll.dll! 777119bb)

  ntdll.dll! (7771198e)

  Disassembly:

  068F58AD int 3

  068F58AE int 3

  068F58AF int 3

  068F58B0 push ebp

  068F58B1 mov ebp, esp

  068F58B3 mov eax, dword ptr

  068F58B6 push esi

  068F58B7 mov esi, dword ptr

  068F58BA mov ecx, dword ptr <-current statement

  068F58BD push edi

  068F58BE mov edi, dword ptr

  068F58C1 push edi

  068F58C2 push ecx

  068F58C3 call 06A7B39A

  068F58C8 add esp, 8

  068F58CB test eax, eax

  068F58CD I 068F58EA

  068F58CF mov edx, dword ptr

  068F58D2 push eax

  068F58D3 push edx

  068F58D4 call 06A7B3BE

  068F58D9 mov eax, dword ptr

  068F58DC push edi

  068F58DD push eax

  068F58DE call 06A7B3BE

  068F58E3 add esp, 10: 00

  068F58E6 pop edi

  068F58E7 pop esi

  068F58E8 pop ebp

  068F58E9 ret

  068F58EA push 6A7D310h

  068F58EF push 1DBh

  068F58F4 push 6A7D2B4h

  068F58F9 push 6A7C500h

  068F58FE button 8

  068F5900 push 0

  068F5902 call 06A7B388

  068F5907 add esp, 18 h

  068F590A pop edi

  068F590B pop esi

  068F590C pop ebp

  068F590D ret

  068F590E int 3

  068F590F int 3

  068F5910 push ebp

  068F5911 mov ebp, esp

  068F5913 mov eax, dword ptr

  068F5916 push ebx

  068F5917 mov ebx, dword ptr

  068F591A test ebx, ebx

  068F591C push esi

  068F591D push edi

  In addition, I'm not sure why. Even though I am debugging my program in VS2008, when the accident occurred, I get a different dialog box that opens with the crash and asks me to select a debugger. If I look through the code in the debugger I was originally running, I can't find the battery failure or call. In the dialog box, if I choose to start a new debugger I can get the above information.

  Please, can anyone help?

  Thank you very much

  Scott

  This issue has been addressed here and here. Generally, the next version of VixCOM will most likely fix it (VMWare isn't saying when it ships).

  If you do not simultaneous connections to multiple hosts, you should be able to get around the crash by releasing virtual machine objects, by disconnecting and by calling GC. Read the threads. It might help if you go to VMWareTasks, the biggest problems are around IVixHandle-s of monitoring and ensuring that everything is null-ed, disconnected and closed - the library supports that.

• Legend keeps appearing with "exception e"access violation in module sytem analyzer.exe sms to 002f7907 whatever that means?

  call from someone advise me on how to get rid of this area, simply?

  [Moved from comments]

  Hello

  A web search suggests that sms system analyzer.exe is System Mechanic. The error message means that System Mechanic is defective (on its own) is to have a conflict with another program.

  If (Iolo) System Mechanic is installed I uninstall it and leave it uninstalled - it's useless.

  If you use and trust System Mechanic you can uninstall/reinstall. That might solve the problem.

  Don

• Unrecognized USB device... need help with the SFC results!

  I followed several channels of the problems that were associated with the popup error in Vista that says "Unrecognized USB device"... that I'm having the same problem.

  I tried to uninstall and reinstall my USB drivers with nothing working.  It was recommended that SFC.exe in the message area of C:.  I did and it came up with error messages that could not be repaired in the CFS program.  What should I do to fix these problems?  I posted the report itself below, showing that areas that have problems.

  Any help would be appreciated!

  ] Beginning Verify and Repair transaction
  2010-02-15 16:28:48, info CSI 00000124 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:28:50, info CSI 00000126 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:28:50, info CSI 00000127 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 16:28:50, CSI Info 0000012a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2010-02-15 16:28:51, CSI Info 0000012 c [SR] verification complete

  ] Beginning Verify and Repair transaction

  2010-02-15 16:32:13, Info CSI 00000199 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:32:13, CSI Info 0000019b [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:32:13, CSI Info 0000019 c [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 16:32:13, Info CSI 0000019f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2010-02-15 16:32:13, 000001 has 1 CSI Info [SR] full repair

  2010-02-15 16:32:13, 000001 has 2 CSI Info [SR] validation transaction

  2010-02-15 16:32:13, 000001 6 CSI Info [SR] a check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  2010-02-15 18:31:23, info CSI 00000006 [SR] components check 100 (0 x 00000064)

  ] Beginning Verify and Repair transaction

  2010-02-15 18:35:11, info CSI 00000124 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:35:12, Info CSI 00000126 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:35:12, Info CSI 00000127 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 18:35:12, CSI Info 0000012a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2010-02-15 18:35:13, CSI Info 0000012 c [SR] verification complete

  ] Beginning Verify and Repair transaction

  2010-02-15 18:37:58, info CSI 00000199 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:37:58, CSI Info 0000019b [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:37:58, CSI Info 0000019 c [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 18:37:58, Info CSI 0000019f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2010-02-15 18:37:58, 000001 has 1 CSI Info [SR] full repair

  Hi CapsFanQ,

  To repair the system corrupted files on the computer that was not fixed by SFC scan, an upgrade in place might have to accomplish.

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/default.aspx/KB/968279

  (See option 1 in the link)

  Note:  Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. Make sure that you back up personal data to disks or other storage devices before performing an upgrade on the spot. To perform an upgrade in-place, follow these steps.

  Until you try to upgrade on the spot, I suggest you follow the steps mentioned below to fix USB:

  Step 1: Run the fixit provided in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  If the problem persists,

  Step 2: Connect the device to a different USB port and test and also to connect the device to another computer to eliminate the problem of USB device.

   

  If the problem persists,

  Step 3: Reinstall the USB controllers.
  

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  You can contact the manufacturer of the USB device for known problems

  Step 4: Update the driver of the motherboard (Chip set drivers) to the latest version.

  Note: Please check with the manufacturer of the motherboard before installing the driver.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer unable to detect USB devices. Problem with the PnP device

  Hey,.

  When I use any usb device in my computer it didn't show. When I troubleshoting the messege see the problam pnp device. kindly advice me how to solve this problam in my system.

  Thank you.

  Original title: pnp device problam

  Hello Usman,

  Thanks for posting your query in Microsoft Community Forum.

  1. It was working fine before? If Yes, you did it any significant hardware or change software on the computer before this problem?
  2. What is the exact error message you get, when you say, 'messege see device pnp problam?

  I understand that you can not use your USB devices because your system does not detect them. To resolve this problem, I would suggest trying the following methods and check if the number is reproduced.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Also, run the next fixit to solve common problems with USB devices.

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  More information: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Clock and hw external trigger with USB-6210 on Linux with NOR-DAQmx Base?

  I have two devices USB-6210 I need to synchronize so that they both collect data exactly at the same time. I was told by support OR I can send the clock off Dev1/PFI4 and have the two USB-6210 s read the clock in through their own PFI0. I also want to trigger data collected for each device by sending a trigger off Dev1/PFI6 and have two devices to receive the signal on PFI2.

  All my attempts to try this are filled with error messages and my research online seem to say that's not possible with USB devices on NOR-DAQmx Base 3.4.0f2 on Linux.

  I "ve tried using example AI programs and those who do not seem to work either for external clocks. Here is the code I tried:

  #include "NIDAQmxBase.h"#include 
  
  #define DAQmxErrChk(functionCall) { if( DAQmxFailed(error=(functionCall)) ) { goto Error; } }
  
  int main(void){    // Task parameters    int32       error = 0;    TaskHandle  taskHandle = 0;    char        errBuff[2048]={'\0'};    int32       i;
  
      // Channel parameters    char        chan[] = "Dev1/ai0";    float64     min = -10.0;    float64     max = 10.0;
  
      // Timing parameters    char        clockSource[] = "/Dev1/PFI7";    uInt64      samplesPerChan = 1000;    float64     sampleRate = 10000.0;
  
      // Data read parameters    #define     bufferSize (uInt32)1000    float64     data[bufferSize];    int32       pointsToRead = bufferSize;    int32       pointsRead;    float64     timeout = 10.0;
  
  printf("Calling CreateTask...\n");    DAQmxErrChk (DAQmxBaseCreateTask("",&taskHandle));printf("Calling CreateAIVoltageChan...\n");    DAQmxErrChk (DAQmxBaseCreateAIVoltageChan(taskHandle,chan,"",DAQmx_Val_Cfg_Default,min,max,DAQmx_Val_Volts,NULL));printf("Calling CfgSampleClkTiming...\n");    DAQmxErrChk (DAQmxBaseCfgSampClkTiming(taskHandle,clockSource,sampleRate,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,samplesPerChan));printf("Calling StartTask...\n");    DAQmxErrChk (DAQmxBaseStartTask(taskHandle));printf("Calling ReadAnalogF64\n");    DAQmxErrChk (DAQmxBaseReadAnalogF64(taskHandle,pointsToRead,timeout,DAQmx_Val_GroupByChannel,data,bufferSize,&pointsRead,NULL));
  
      printf ("Acquired %d samples\n", pointsRead);
  
      // Just print out the first 10 points    for (i = 0; i < 10; ++i)        printf ("data[%d] = %f\n", i, data[i]);
  
  Error:    if( DAQmxFailed(error) )        DAQmxBaseGetExtendedErrorInfo(errBuff,2048);    if(taskHandle != 0) {        DAQmxBaseStopTask (taskHandle);        DAQmxBaseClearTask (taskHandle);    }    if( DAQmxFailed(error) )       printf ("DAQmxBase Error %d: %s\n", error, errBuff);    return 0;}
  

  When I run the resulting program, I see this:

  $. / acquireNScans-ExtClk
  The CreateTask call...
  Call for CreateAIVoltageChan...
  Call for CfgSampleClkTiming...
  Error-89136 DAQmxBase: route specified cannot be satisfied, because the hardware does not support it.

  For example, a clock and a trigger can be imported via one of the PFI lines by using a USB-6210 on Linux with NOR-DAQmx Base? A clock and a trigger exportable via one of the PFI lines?

  If so, does anyone have the code example illustrating how to do this, or can you at least tell me the names of the lines ("PFI0/Dev1" or other) so I can try again?

  Clues or suggestions would be helpful.

  Thank you

  -Tom

  The clockSource in the example specifies an output rather than an input channel channel. Change source "/ Dev1 / PFI0" solved the problem.

  Please close this post.

• Satellite S1800-314 is slow if a USB device is connected

  I have a Satellite S1800-314 but its slow when I have stuff USB conect as dougle wireless or USB HDD and

  I am running Windows XP PRO 2002 SP2
  Is there anything I can do to make it faster?

  Hello

  In your case I would first update the chipset drivers. You can find it on the Toshiba site in * Archives *. In addition, you can update the BIOS too. Maybe this solves the problem with USB devices.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  There are many things you can do to make Windows XP faster. Search Google for it and you'll find enough.
  Here are some examples of how you can do it faster: starting disable programs in msconfig, disable services that you n t need, defragment your disk at any time and so far.

  Welcome them

• How to get USB-6009 DAQmx device instead of a USB device

  I undertook a LabVIEW app from a Windows XP laptop work a windows7 (32 bit) laptop. When I connected the USB cable from the laptop to my Flow Bench machine, that contains an NI USB-6009, he appeared in MAX under USB devices and not, as he always did before, under NOR-DAQmx devices. If the USB-6009 case is not recognized in my application.  When I tested the example Acq & chart voltage-Int Clk - SW Trig Restarts.vi, when I try to navigate to this device in this example, the search box is empty - no DAQmx device not found!

  How can I get this device 'live' under NOR-familiar DAQmx devices instead of strange USB peripheral area? What is going on?

  Thank you!

  Finally, you looked in the right place. As indicated in the page file or the file read me download, this version is not supported on windows 7. Download a newer version. Click on the 'Support' link at the top of the page.

• my USB not conectec driver doesn't instal no eror show usb device not shown usb me

  My usb device does not show eror conectected lock me eror see the

  Hello

  1. What is the accurate and complete error that you receive when you connect the USB device to the computer?

  2. what USB device you have connected to the computer?

  3. are you having problems with USB devices or specific USB device?

  4 you did changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can try the steps of troubleshooting provided in the links below.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

• Service Pack3, usb devices not recognized

  I have a desktop computer and I am running SP3 on it. Im having problems with USB devices. As soon as I plug them in, computer says "USB device" not recognized A game controller and a USB 4port hub are the devices and they worked fine before. Thanks in advance

  Are your self-powered usb hubs? Who's got it power 110? Try plugging an item at a time and see if they are good. Especially on laptops, using a powered usb hub current it is of the laptop slows down the system because it is not run to 12 volts. Windows stops of concervé power devices. Jon A Martinez MCSE

• Device USB error: USB device not recognized

  For a week to 10 days I could not connect my USB drive to the USB port. Also my keyboard and mouse stopped working because I was using a USB hub. It must have been a few Windows Vista update recently which caused this problem with USB devices. It does not recognize the USB devices. I can use the USB device on my laptop mini where I have Windows 7.

  Microsoft is going to solve the problem in Windows Vista. There should be no reason that we cannot use USB devices and before 10 days ago, it was not a problem.

  Thank you for your help.

  Hi NRuss,

  1. have you checked if the devices are getting detected in Device Manager?

  Step 1: Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 2: Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat step 4 for each USB controller is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.