NI USBLAN adapter disabled after a while

Similar Questions

• Mobile watch G3 using and using firefox. The fonts are not reinvest/wraping to adapt to the screen while increasing fonts.

  I use hand G3 mobile with android in browser firefox web. Fonts are reinvesting / wraping to adapt to the screen while increasing the size of the font. The same functionality was available when I am using mobile watch E3. But I think that's not mobile dependent feature. I'm missing a few settings.

  reflow on zooming option can be disabled. Try to toggle this option.

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.
  3. Search browser.zoom.reflowonzoom

• Cannot load websites after a while

  Firefox cannot connect to Web sites after a while. It will keep on the connection but no results. Sometimes, the page will be able to load. Other times, I need to restart the browser.

  I tried the things:
  1. disable the plugins and modules.
  2. the other browser (Chrome) works very well.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections from 255 to a setting like 30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

• Satellite L750 - 1RV WLAN disabled after startup or sleepmode

  Hello
  last week, I disabled using Fn + F8 wireless network adapter. After that I swichted this on via Fn + F8 and it worked again.
  But after that Sleepmode WLAN didn't work.
  Watching Fn + F8 it says 'On '. I have to turn off "" first and that "light", or I choose "immediately" (WLAN and Bluetooth) have job WLAN.
  After having a peek in the forums, I checked again WLAN driver and tried in DEVICE MANAGER, disable the option "computer can turn off this device to save power" (sorry, it's my translation of German Windows). But nothing helps.
  WLAN is still not active after start or mode 'sleep'.
  Pls advice.
  Thank you and greetings!

  I found another thread on this problem and this work around has been confirmed in this forum as a solution:

  -Press the Windows key + X, select Device Manager.
  -Right click on network adapters.
  -Click on properties and select the power management tab.
  -Uncheck allow the computer to turn off this device to save power.

  Finally restart the system

  Your comments would be appreciated

• Someone used this on me and after a while windows shell program take completely my computer as well as bank accounts

  I finally understand what has happened to all computers, I threw out and now it's a. Someone used this on me and after a while windows shell program take completely my computer as well as the account numbers of bank accounts and cards and so on. I got it with computers. I have been a dedicated customer of Microsoft and I can't believe that you would put on such a dangerous program that any computer fool can use to people disrupting. I want to know what I can wip this thing by buying a new hard drive and operating system put this program on this subject before I sitgn on the internet and don't have not this thing happen? I would like to send you the hard drive rinse you these people in the open air where I could get my hands on them. This coswt haqs me more than I want to tell you.

  I think that you're wrong in your assessment of what you have been.  "Shell Microsoft Program"?  Please explain.

  If configure you your own computer, software Windows XP firewall is enabled, have a decent router (reset and configured with a password before connecting anything to him) between your network and the Internet, and you have changed all your passwords for each account to a password that is hard (15 characters or more containing at least three of the four character types (: uppercase, lowercase, number, and symbol) and checked that each account online has a configuration password recovery method that * you * have you personally (no one else has used your password they obtained to make sure if you have already changed your password, they could get the upper hand) and you have a decent anti-virus software installed. Then you should be fine.

  You can Disable Remote Desktop (on Windows XP Professional - you left out the details of your operating system in your rant) and Remote Assistance if that makes you more comfortable or you do not use these functions.

  Otherwise - most of it security is common sense stuff.  Do not download or run things do not know the origin of and trust said origin and application.  Do not open unknown emails and instant messages.  If you do not call to get your computer fixed, don't expect sopmeone will call you to fix your computer problem - and if they don't - know it's a scam.  Don't visit questionable websites.  Do not use the computer on a daily basis with a user account that could ruin everything (run as a normal user, not an administrator for your daily activities.)  Keep your system and you have installed - including all antivirus software - up to date/current.  Keep your computer in a locked - room physical security is a top priority.  Backup your important data to external media.  Change your password periodically - because you have a password - most probably someone can get it.  If something is * really * important keep you the 'secret' and protected - encrypt.  Almost every other method can be easily bypassed - encryption, not so much.  Etc and so on...

• BB10: Animations get disabled after App gets in cover Mode

  Hello world

  I was wondering if someone could help me with this.

  I don't know why animations get disabled after my application gets coverage, or same mode after I supend the screen.

  It is really strange, and it happened for a while now.

  Any idea how to fix this?

  Thank you!

  Note that there is an excellent chance that it is in the firmware, not the SDK. Make sure you have at least the last installation for your Dev Alpha or Simulator, so updating the SDK doesn't seem to help.

• How to turn off the display after a while without input

  Original title:

  Activate the screensaver mode full-screen.

  Hello

  Windows by default is to disable the screesaver mode when an application runs in fulscreen. I need to enable it. I need to turn off the display after a while without input. So is it possible to do?

  Hello

  Thanks for choosing Microsoft Community to post your question. Windows 7 comes with the power settings using which, you can turn off the display when it is idle for some time.

  Please visit the following links and set the option to turn off the display according to your requirement.

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Power management

  http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management

  Hope that the information provided is useful. Do not respond if you need more help.

• Context menu (including all the other menus) does not work after a while.

  I use ubuntu 12.04 LTS, 33.0 firefox (thunderbird also same problem).

  Context menu and all menus are not works after a while (maybe 30 min)?

  I have to close all firefox windows to make the menus work (make an another new firefox windows does not solve problem)

  The problem this menu would not be displayed (menu popup and also normal menus) have not been reproduced approximately 2 days.

  I have not try your solution because I had planned to try your solution after I encounter the problem again.

  Only difference when I got problems with menu meets it is that I ran firefox from terminal invites no task bar of the unit...
  (I expect to capture some bad newspapers of the terminal prompt when I encounterd new menu problem)

  Maybe it takes other hours or days before I met the new problem or there is a possibility that I could not this problem again until I do some changes (restart firefox from unity...)

• Modules are disabled after every start.

  Add-ons are disabled after every start. I have to re - activate all add-ons after the start.

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.sqlite, extensions.ini, extensions.cache) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

  If you see disabled extensions, is not compatible, in "tools > Modules > Extensions ' and then click the Tools button, on the left side of the search bar (or click on the"Find updates"button in older versions of Firefox) to check if there is an available update compatibility.

  If that didn't help then also try to delete the file addons.sqlite.

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved
  • https://support.Mozilla.org/KB/preferences+are+not+saved

• Why is - this much of my modules and extensions have been disabled after switching to firefox 6

  A lot of my modules and extensions have been disabled after switching to Firefox 6.
  No Java extensions can be used;
  my Microsoft Framework is disabled;
  my media player has disappeared;
  and my google with all of my important Favorites toolbar is missing.
  How can Firefox 6 be considered an "upgrade"?
  How can I 'recover Firefox 4 or 5'? -there is no point in using a browser which limits as many sites the necessary module!

  The Google toolbar options

  • http://KB.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
  • http://www.Google.com/support/toolbar/bin/answer.py?answer=1342452

  JAVA

  -> Download & install Java SE on your system:

  • http://www.Java.com/en/
  • Click on the free Java download button

  -> Using the Java with Firefox plugin

  • https://support.Mozilla.com/en-us/KB/using%20The%20Java%20plugin%20with%20firefox

  Try to update all your modules in Firefox. You can also inquire by developers to Add - we for a version update & Firefox 6.0 took charge of the Add-ons that are not currently Compatible with Firefox 6.0.

  Check and tell if its working.

• I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please

  I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please

  In short - you can't

  IF you have a computer with iTunes on which you did a prior backup - the phone will be recognized and iTunes offer todo backup before it clears your device - that - except if you know the access code the content cannot be saved

• Skype causes Blue Screen of Death after a while in a call.

  Hello, I am currently having a problem with my Skype where it will make my computer BSOD after a while in a call, it only occurs during Skype calls, not during other communications programs of voice as the voice of steam call and the blue screen is more likely to happen when I'm in Firefox.

  The blue screen error I get is "clock interrupt was not receieved a secondary processor in the time interval allowed."

  Any help would be appreciated.

  I did clean install applicable drivers and even tried to Exchange pieces of equipment (including the negotiation on an old CPU and RAM value) and no change.

  Fortunately, a solution to the problem, which has been swicthing on Google Hangouts. They work much better because there is no decrease in performance, even streaming, has more features and does not cause a blue screen after a couple of hours.

• Satellite L300 PSLBGE screen turns white after a while.

  I * model Toshiba Satellite L300 PSLBGE * and I have never seen this problem before.
  I use my laptop since last year in fact my laptop screen turns white after spending some time on it, usually after 10-15 minutes...

  sound also stop here and the only solution is to reboot, after that reboot it still works well, but after a while once again its screen turns white.

  Please help for this problem

  Post edited by: bharatjaiswal5

  Hmm have you tried to reinstall / recover the laptop to see if it helps to solve this problem?
  In my opinion you should try it because it could be a problem in the system.

  Otherwise if new system installation / restore does not help you, it could be a malfunction of the equipment.

• Tecra M2: sound system stops working after a while

  Hello

  I used my TECRA M2 a year without serious problems. A moth started it my problems with audio - after the start (no matter if via boot or wake up from hibernation) his (speakers) system is functioning normally. After a while (several tens of minutes, hours) sound system stops working (no sound from your speakers or headphones). No errors appear, but not sound. When you try to adjust the volume via the Windows icon on the bar the task CPU usage becomes very high.

  I decided to reinstall my M2 - the first attempt was clean install of WinXP SP2 standard support - sound problem has not changed. Today I decided to restore the system recovery CD, but the result is the same :-(

  Any idea? -I suppose that problem Council... Now, I made a mistake when entering - beeps system (such a beep as during startup) - interesting :-/

  Except sound problem - another strange thing - when I send my XP to restart in about 10% of the attempts he goes off and does not start. Starts normally after pressing power button...

  Any ideas would be much appreciated
  TX

  Hello

  Looks like a hardware malfunction.
  Maybe it s caused by overheating.
  Check the cooling modules and try to clean it with the vacuum cleaner.

  If it doesn t help you should contact the Toshiba ASP.

• VISA problem read: after a while the device stops responding

  Hello world

  I am faced with a really strange bug than anything I've done him could not solve. I have a camera that I made myself communicating with LabVIEW by a RS232-> USB converter. Everything seems to be ok, but all of a sudden (it can last 30, 45 or 50 seconds), judgments of LabVIEW and data reception, as well as other buttons are no more, not even the stop button. I have to remove the usb converter to get the buttons answer once again, and then I got the error:

  

  Other programs that opens this same terminal can communicate with my camera for hours without errors. I have of course the session open and close only after the while loop. Can someone help me?

  How fast your VI reads the com port?... could he try to read too fast?... Add a waiting in your VI and see if that helps.

  Just a thought...

  Josh