NI-VISA 5.1.2 outputs/farm right after launching it on CentOS Linux 6.2 PC, also blocks LabVIEW trying to create VISA constant REF for VISA Open.

Similar Questions

• Do not launch Lightroom, right after the start screen. With the help of lightroom6 on Win 8.1.  Installed and worked for a week.

  Lightroom does not start, gets stack after the splash screen.

  With the help of lightroom6 on Win 8.1.

  Installed and worked for about a week, before it happened.

  David

  Hi assani

  Now it's working.

  After the restart I have asked me to update to lightroom, which I did.

  Now it's working.

  Thanks again, David

• Output of find VISA VISA open resources

  VISA find resource returns an array of strings. When I have one of the elements of wire to VISA Open there is a point of constraint.

  Is there a function which should be used so that the point of constraint goes?

  Try attached.  You can ignore the point in this case as well.

• LM500 error-1073807202 old VISA Open in LM - 500 Initialize.vi - > Operate.vi LM-500

  Hi all

  I am new to using labVIEW and I would be really grateful if you could help me with an error.

  I'm trying to control a model LM-500 liquid cryogen level monitor (Discontinued).

  Its drivers are available online and I download and I'm launching the demo.

  When I try to run it I got the following error:

  code error-1073807202

  Former VISA Open in LM - 500 Initialize.vi-> Operate.vi LM-500

  The LM-500 is connected to my computer through RS232 serial.

  I don't know what could be the error. I would appreciate if you could give me an idea about it.

  These are the drivers:

  http://www.cryomagnetics.com/drivers/LM500LV6_1.zip

  Thank you very much for your help

  That's because the new VISA open does not recognize the IO senior class, you must remove and replace it with the new type. Right-click on the resource of visa > Create > control.

  Select the rigtht COM port and try again

• 4/2 (B) IOM right AFTER failure

  Connection just finished our 4th chassis and it shows the following error message: "IOM 4/2 (B) right AFTER failure.

  A screenshot of what I see in the UCS Manager under chassis 4 fouls and POST results on the general tab for chassis 4 is attached.

  Any ideas on how to fix?  Or has anyone seen this before?

  Drew,

  If it is not yet the production, you can try to reset the IOM and force him to RE-POST.  UCSM, select the IOM in question and click "Reset".  It will take about 6-7mins to deal with.  Alternatively, you can remove physically IOM, wait 10 seconds and then reinsert it.  This will also force a POST kickoff again.

  If the IOM does still not MESSAGE, then collect the following output and evoke a TAC case as suggested.

  For UCSM 1.4 or later:

  1. go to the Admin tab, select the top level of the navigation tree and select 'all '.

  "2. on the right side, you should see a link to"Create and download Tech support"information."

  3. Select the local path to save the output file

  4 Select "Châssis" and enter the chassis ID #.

  5. Select "IOM" below and let 'All' selected.

  For UCSM 1.3 or earlier:

  1. SSH to virtual IP of UCSM, connect with Admin credentials.

  2 issue 'local connection '.

  3 issue "present chassis technical support details X", where X = the chassis # for this MANUAL.

  Gathering this forward and by attaching it to your TAC case when you open with a good description of the issue will accelerate the resolution.

  Kind regards

  Robert

• Buy unlocked iPhone 7 right after the release date

  Friends good day! Let's say I want to buy an iPhone 7 right after the release date before apple officially begins selling the devices free SIM card. I'd be able to come simply to store and buy, for example, an AT & T phone to use with my operator? Because I know that they would be not selling sim free phones in the first two weeks. Or do I have to buy a plan as well and become a customer of AT & T? In other words, I need now a unlocked device, and can I get one without waiting for the start of the free features of SIM card sale. Thank you!

  If you buy any iPhone outright directly from Apple full paying, it is carrier unlocked.

• Satellite M100-233: stops right after the "XP" logo

  Hello
  I have a Satellite M100-233 with XP Home Edition SP3 (in Portuguese)
  When it is connected to the mains and the battery is not fully charged, sometimes the yellow light does not shine.
  Check the voltmeter application when this happens, tells me that the battery is on, the energy source is the sector, but the battery runs down.
  As I continue to use the laptop, the amount of the battery is reported as progressively less, until he tends to zero, then the laptop just turned off, as if she was not connected to the mains.
  Even if I start with the battery charged to 100%, after a couple of hours (sometimes more, sometimes less) the same thing happens.

  From an authorized dealer, they told me that it was probably a short battery shorted out.

  Get not that: * if she take the battery out of the laptop and turn it on:
  -Most of the time it turns off right after the "XP" logo.
  -It seems that this happens more often when the battery was fully charged the last time that I used it (strange! "I imagine this?)
  -Also sometimes happens after that I use the laptop for a while

  The only unusual bios message I get is "no TPM or TPM has a problem." I guess it has to do with the cryptographic protection, so I imagine that this has nothing to do with this issue.
  About two years ago, there was a problem with the battery (it ceased to be recognized as present by the laptop) which has been repaired under warranty: they told me that they had replaced the motherboard then. However, at this time there that I could continue to work normally without the battery, which is not the case now.

  I would be grateful for any advice. The most annoying is that this problem follows an irregular pattern, and the diagnosis, the dealer gave me seems hard to believe. As I use my laptop to collect data for research abroad, it is quite a risk for me to use it if I can't be sure when it will turn off on its own.

  Hello

  To be honest, I doubt that anyone here in the forum would be able to provide an exactly the answer to this question
  I think that it of almost impossible to say what's wrong without running any hardware checks.

  But to me it looks like a card mother number possibly it s power of electronic power supply which is part of the motherboard.

  What to say, maybe you need a new motherboard, but the new mobo is an expensive item, and in my opinion, you should first check if it is s to replace the motherboard or buy a laptop second hand for the same money.

• Satellite A200 turn itself right after I turned on

  I have a huge problem with my laptop.

  After turning on when the windows status bar shows it shuts itself. I don't know what to do. I remember that I was installig Vista SP1 and 2 and after another, restart the related problem. Please could you help me?

  > But I checked the temperature with SpeedFan, and I realize why it blocking down. Base temperature. are above 90 (degrees celsius!) after windows starts (couse sometimes it lights, for example when it is not used for a few hours) without the stressful situations. It's just I don't know what is cousing the problem. How is the temperature going if high right after windows logs.

  I think that the laptop automatically stops due to this high temperature
  Maybe the fans and cooling rack would not be cleaned in the past and the dust and debris to prevent cooling modules work properly
  The dust should be removed all first you can do it by using a jet of compressed air.
  I did it several times and it worked for me.

  The temperature of the CPU can be different and is dependent on the use of the laptop but 90 c is really high, and this may cause a stop down

• Hello! I just bought an iphone 6 and I was starting the phone due to what he says, but right after the icloud copy was made the phone do not respond... He says decides to continue, but slice to reload button does not work... What can I do?

  Hello! I just bought an iphone 6 and I was starting the phone due to what he says, but right after the icloud copy was made the phone do not respond... He says decides to continue, but slice to reload button does not work... What can I do?

  See if the troubleshooting steps in this article to take help supported:

  If the slide on the upgrade screen does not disappear once you upgrade to iOS 9 - Apple Support

  See you soon,.

  GB

• VISA (open or not) port State

  Hello

  I want to know if the name of resource VISA I selected is open by another application or not to decide to open it or not.

  I tried to use the error of the VI open VISA to find out if the port can be used or not. So I created two screws using the same port (of course the port exists).

  The first VI open port without any error. And against all odds, the second VI open port without error, while one is using the port without closing.

  Note that the name of the second VISA VI list resource shows that this port is open (the icon next to the name of the port) before running it.

  So is it possible to know if a port is open by another application?

  Yes, the error signals if another application has the open port, assuming a serial port. Another VI is, of course, not another application. This is the same application - LabVIEW.

• No audio output device installed - after installing windows 7

  I installed a copy of Windows 7. Clean install, not an upgrade and not a copy of the beta.
  The computer is now telling me that there is "no audio output device is installed".
  the sound was working fine before the installation of Windows 7.

  I looked ofr updates for the drivers, but I can't find them.
  The motherboard is an ASUS KBV SE sound card w\ luxury.

  Thanks for your help

  Any help to fix this problem would be appreciated.

  Can you check it out here:

  Start > Control Panel > hardware and sounds > sounds > Sound

  Under "playback" tab is "Speakers" selected as "default" device?

• DMS window closed right after opening

  Hello

  I just received the RIM signing keys and want to register for code signing so that I got the Jdk 1.6 to 1.5 as specified in the forum thread ' http://www.blackberry.net/developers/forum/threa d.jsp? forum = 1 & thread = 10630. Then all the version JDE works well, but the SDM does not work. The problem is that the window closed MDS right after opening.

  Then I reinstalled the Jdk 1.6, but no change in the MDS.

  FYI: All versions of JDE and MDS worked well before the decommissioning of the jdk.

  Currently, the configuration of my system is:
  1 jdk 1.5 and 1.6
  2 JDE 4.3.0 (the build in MDS does not.) The MDS window close right after opening)

  Thanks in advance.

  Hello

  Decommissioning of the JDK version is not always an ongoing process. I've seen cases where some of the registry keys are left behind. One thing you can try is by running "java-version" and "javac-version" from the command prompt. Also check the path environment variables.

  The following Knowledge Base article has some additional causes/resolutions: http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800792/801079/...

  Tariq

• right click on windows Explorer causes crash! Sometimes when I try to empty the trash, it also blocks? I use windows 7?

  right click on windows Explorer causes crash!  Sometimes when I try to empty the trash, it also blocks?  I use windows 7?

  Right-click accidents are caused by third-party shell extensions. To identify the culprit, you must use a utility like ShellExView and disable context menus not Microsoft managers one by one (or disable items in a batch) and observe.

  ShellExView - Manager of Windows Shell extensions:
  http://www.NirSoft.NET/utils/shexview.html

  And instructions are here (see "Method 2")
  http://WindowsXP.MVPs.org/slowrightclick.htm

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Is it possible to convert the standard numbered list to the list that appears on the same line a right after another? As indicated in 1. Text goes here, 2. Text goes here, 3. Insert text here

  Is it possible to convert the standard numbered list to the list that appears on the same line a right after another?

  Instead

  1. Insert text here
  2. Insert text here
  3. Insert text here

  This

  1 text goes here, 2. Text goes here, 3. The text here.

  This revised list can take multiple lines.

  I use InDesign CC2014 - if that makes a difference.

  the only way is to convert numbered in the text (select numbered list > ctrl (or right click) > bulleted & numbered lists > convert numbered text).

  Then, with search - replace, you can change the paragraph returns in space (or in space by commas as in your example)

• How can I change the default output module in After Effects CS6?

  How can I change the default output module in After Effects CS6? At the moment it is .avi and I do not want to change it to .mov whenever I start a new project. (Windows 8)

  Change--> output Module settings.  being enawed by the beauty and the usefulenss of this Panel...

  Mylenium