NI-VISA 5.3 driver Wizard does not support USB 3.0 devices

Hi all

It seems that NI-VISA 5.3 does not support USB 3.0 devices. When I try to use the driver Wizard to create a driver for a USB 3.0 device, I get the error "ERROR-1073807178: device descriptor error - value not valid bMaxPacketSize0 (must be set to 8, 16, 32, or 64 bytes). I noticed that the unit has been giving wMaxPacketSize0 of 512 (2 ^ 9). But the driver Wizard treats the value 9. So I think that Assistant driver does not support USB 3.0 devices. If someone could confirm this?

Thank you very much in advance!

Jackie

Hello Jackie,.

Unfortunately, USB 3.0 is not officially supported in VISA 5.3 when you use VISA Driver Wizard.

A non-official solution is to work around the "information in the descriptor' by selecting 'Other' in the list of devices. You will need to manually enter the 'USB manufacturer ID (vendor ID)' and 'type USB (Product ID) Code. You will then need to find your driver in Windows Device Manager, right click and select "update driver software". This, however, is not a workaround solution guaranteed as NI-VISA 5.3 is not officially compatible USB 3.0.

Tags: NI Software

Similar Questions

  • Windows media player 11 on downloaded videos error "cannot read drive file does not support the file type or does not take in charge the codec used to compress the file.

    • now that the full version of k'lite seems to stop what is happening why hasent windows incorporated something similar in the windows media player 11, or they have another type of codec full, we can use to make this.only so many people have the same problem .please can help you.

    Hi bbdunford,

    Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

     

    You may encounter this error message for the following reasons:

    (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

    (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

    Windows media player will play only the files and videos only if it supports this type of file.

    Method 1

    Check if the video file format is supported by Windows media player using the link below.

    Information on the types of media files that supports Windows Media Player

    http://support.Microsoft.com/kb/316992

    If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

    Method 2

    See the link below for more information on the codec.

    Codecs: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Re: Portege M800: driver WebCam does not support the internal mic on the 64 bit OS

    Hi all!

    I have the problem that the internal mic in the webcam (Chicony) does not work in 64-bit (Vista or Windows7).
    Does anyone have a solution for this?

    Best regards
    Sven

    Hello

    How did you test it?
    Have you checked the settings in the software assistant webcam?

  • IX2 - dl does not support USB hard disk

    Hello!

    I use an ix2 - dl as a backup at home. I recently upgraded from 2 TB WD red 2 (WD20EFRX) for 2 hard drives 4 TB (ST4000VN000) of Hitachi (two configurations were / are RAID1), and the upgrade went through flawlessly. But there is a problem: in the old configuration, I used a third drive connected via USB as a backup in case of failure of the NAS itself offline. Since I doubled the storage in the RAID array, I wanted to double the external storage as well. I plugged the third 4 TB on my homeserver disk, formatted (NTFS) and plugged my NAS ix4 - 300 d and just of stood and was used as the 2 TB drive in my ix2 - dl. However, when I plugged in my ix2 - dl it just does not appear here. I activated the end looked in SSH and foundout, he got during a few seconds under/mnt/ext /. said lsusb shows the drive is still there and parted and parted lists the disc correctly. I re-formatted it ext3 and ext4 and in both cases the reader is not always mounted on the correct mounting points. I created/mnt/test and mounted the USB it there using mount-t ext3/dev/sdc1/mnt/test, which works; Now I can access the drive via ssh. However when I tried mount - bind/mnt/test / / mnt/pools/A/A0 /respectively, I can open this folder, but cannot access any file in this directory. In addition, this workd only workaround until the next reboot, thereafter, the unit can be mounted in all.

    Why this drive works perfectly on my ix4 - 300 d one isn't quite on my ix2 - dl? I'm at my wits end with this issue. any help would be appreciated.

    Hello Firestart3r,

    From my experience, most of the devices and firmwares don't mount not an external drive that is greater than 2 TB:
    https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/34774/kW/external

    I understand that one device is to mount the drive while the other is not, but as a planned restriction, the only solution I can really offer is to partition the external hard drive to match the limitation.

    This will often allow to be mounted.

  • Why LabVIEW 2012 does not support USB-6009?

    Hi all

    I recently installed LabVIEW 2012 and DAQmx 9.6 (and also tried with latest version) in my PC with Windows 7. I have the version of Explorer 5.4 measure and automation. I'm working with hardware DAQ USB 6009. Everything seems compatible, but when I try to post data acquisition, it fails. However, I used to use this device (since I bought it last year) with the other PC that has the Windows XP operating system and the older version of LabVIEW 8.5.

    What can I do with LabVIEW 2012 is a message "a 88302 error has occurred." and "This could be an internal error."

    If someone has an idea to solve the problem, please let me know.

    devkotaj

    Hi devkotaj,

    The USB-6009 device should work perfectly on Windows 7 with the software you have listed. This looks like a problem of configuraiton of material for me.

    What are you trying to do when you receive the error 88302? This error usually indicates a corrupt DAQmx driver, which may result from the installation of several DAQmx versions on the same machine. Have you tried repairing your installation DAQmx? I could uninstall DAQmx from the Control Panel before installing the latest driver. You can see our procedure to reinstall or uninstall recommenedd here.

    I hope this helps!

    Andy C.

    Engineering applications

    National Instruments

  • My CD burner will burn the Picture project but in My Documents, my pictures, the CD Wizard does not recognize a CD in the drive?

    My CD burner will burn the Picture project but in My Documents, my pictures, the CD Wizard does not recognize a CD in the drive? He has already done this, but even when I run back to an earlier date, it does not work. FixIt identified the disc as work, but there must be something missing the program of My Documents.

    Hello

    What program are you using to burn CDs?

    Follow the steps in the link below and check:

    http://support.Microsoft.com/kb/324129

    It will be useful.

  • Card error"video or the driver does not support alpha separate mixture, glow will be disabled" when running COD4

    Original title: VGA

    When I run COD4 it says ' error during initialization: video card or the driver does not support alpha separate mixture, glow will be disabled.
    No idea why this is happening?

    There are maybe a few settings in the options/preferences menu of COD.  Your best way is to ask in a support forum for COD.

    In the future (or), before you buy a new game, visit Can You Run It to see if your hardware supports the minimum requirements of the game.

  • Why Wizard does not start when the current user?

    Program does not RUN. Wizard does not open after you select the Option for the current user

    P.S. If you can't always install Firefox, even using the FULL Installer:

    Reinstalling but this time download the file on your computer. When the download is complete, install it as an administrator by right clicking the configuration file and select "Run as Administrator".

  • Xmarks is functional? It didn't work for a week and the installation wizard does not work.

    The last time worked Xmarks was on 25 October. I am connected correctly and it tries to synchronize, but never finished. Even the Xmarks Setup Wizard does not work. It is a very useful addon in the past one I hope he'll return to work.

    I had this problem too. I'm running Firefox 25.0 and used Xmarks 4.2.1. Sync would not end. I downloaded Xmarks 4.2.3 from Xmarks web site (not the site of Mozilla Add-ons that apparently has 4.2.1) and now everything looks OK.

    Mark

  • I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

    I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

    1. did you remove Bootcamp using disk utility?

    2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

  • Why is my Apple - Super Drive CD does not connect to my iMac?

    Why is my Apple - Super Drive CD does not connect to my iMac?  That was before I upgraded to el Capitan.  Now it will not allow CD insertion and the icon does not appear on my desktop.  However, the device is displayed in the Finder and seems to rest for more than 15 minutes, try to connect.  Any advise appreciated.

    try resetting the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

  • Portege P3480CT does not support the CD and floppy drive

    Can someone help me with the following:
    If I start my Portege I get the message: lack of OS...
    I have tried everything to make him work, but it does not support my CD rom drive and a floppy drive.
    Does anyone has a suggestion how to get my protected work yet?

    Thank you very much

    Anton

    Hello
    as far I know the Portege has it a USB floppy and a map of PC CD-Rom.

    Have you checked the Bios of your laptop, especially here the boot priority settings?

    The Bootdisc for Windows 95, Windows NT and Windows 2000, do I have in my archives. I have that helps you, give me that send you an email so that I send you the Bootdiscs.

    Good bye

  • Its satellite A210-131 driver does not support DirectSound entry

    From Premiere Pro CS3, an error message is displayed:

    -"Der zurzeit installierte Soundkartentreiber unterstuetzt keine DirectSound-Eingaenge"Es ist keine Audioaufnahme possible".
    -"The its installed card driver does not support the entry of DirectSound. The sound recording is not possible.

    Please help me find a working driver. Operating system is Windows Visat Ulimate.

    Thank you
    Siegwin

    Hello

    To my knowledge the DirectSound is an addition to the system of Microsoft DirectX. It should be included in DirectX.
    Please check if you have installed the latest version of DirectX 9 C.

    In addition, I would recommend updating the audio driver. On the Toshiba page, you can find the latest two versions of Realtek sound dirver;
    -6.0.1.5374
    -6.0.1.5406

    If the two will not support the DirectSound input try another on the homepage of Realtek.
    The chip is called Realtek ALC268

  • Hard drive replacement, windows support, media does not support this computer?

    Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank

    My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank

  • drive Windows does not start a cd or dvd. it keep said to incert cd after I insert it

    drive Windows does not start a cd or dvd.  it keep said to incert cd after I insert it.  It can not read the cd or the dvd to start.  I rip, but it tells me to put it on cd.  I made a full recovery but still does not.  I have a Lenovo all-in

    Hi Kenneth,

    1. are you able to read files with another player?

    2 have you made changes to your computer recently?

    3. from when are you facing this problem?

    4. what operating system is installed on the computer?

    I suggest you follow the method and check if it helps.

    Follow the link and check if that helps.

    Your CD or DVD drive cannot read or write media

Maybe you are looking for

  • Sound without speakers?

    I have a HP Pavilion P6710F with a thumb 20 Acer S201HL under Windows 7 Home Edition. When I bought the PC a few weeks ago, I asked if I needed to buy anything else.  I was told no, that everything was included (except for software, etc.). Well, I ca

  • Keyboard HP pavilion x 2 battery

    Need help. Three days ago, I bought a HP pavilion x 2. I like the 2 x, we also want to x 2. Partly due to the life of the battery and the keyboard practice. The problem is that the keyboard battery does not load. It is always 0%. Of course, this redu

  • G4 play impossible to copy the files from the PC in MTP mode

    First of all, Yes, I changed to "Charge Only" to "MTP" and secondly, I am unable to copy files from my Windows 7 PC for my G4 bike play. It shows him "is not responding...". "as error. I tried to copy videos. At first, I dropped the files on my SD ca

  • Satellite P300-1FN > TV - HDMI no longer works...

    Dear someone who knows more than me on this subject, both around 6 people... I get bought a plasma TV 32 "Toshiba (regza I think) and Toshiba Satellite P300-1FN.I also bought a HDMI cable and watched dirty movies from my laptop on my phat 32 "TV for

  • IOtech personnaldaq 3005

    I have a new PersonnalDAQ3005 I am trying to run on Dasylab. He reads thermocouples very well on the software IOTech, but gives the waste during playback Dasylab. It will however read the differential voltage correctly in Dasylab. I've already put Da