NI488: Writing not detected no listener

Similar Questions

• Flash is not detected even if I saved it twicw now

  I can get the bbc news Web site, but when I try to listen to the radio, I get a window telling me flash is not detected. so I cliquer click on the link for flash, then save. When I update then, I always get the flash window undetected.

  Please click the button quite useful next to the answer that solved your problem of Firefox support, When you are connected, so this thread is marked as resolved to help other users who may have this same problem.

• Tecra S1 - Bios does not detect HARD drive

  Hi, first time poster, long drive date.

  I have a friends laptop with me an old S1, its hard drive has failed. (Even tried it on my USB adapter to diagnose).

  I had another IDE HDD which works like a dream.
  I can even install Windows up to a point with the exception of when the computer wants to do the first restart of the second phase of the installation. (Not on CD).

  In the bios the HARD drive is not detected a 0 MB for the read command.
  I tested the USB HARD drive. So works perfectly. will try another hard drive there tomorrow see what is happening.

  I tried the recovery CD aswell. But she also can not detect the hard drive.
  Finally, I even reflashed the Bios even if it was the last version 2.50.
  Still did not change.

  If I'm just at a loss here. Tomorrow I'll do the following.

  Try a 3rd HDD IDE into the machine.

  Opening of the case and see if I can find the CMOS battery to replace or remove for a minute or 2 to see what is happening.
  Is obviously a problem of bios of the HARD drive is detected. Has anyone ever encountered this before?

  Windows / ERD Commander / Partition Magic 8 all finding the end hard drive.
  Thanks for listening to my dribble that I feel like I'm banging my head against a wall being close.

  Kind regards

  Dave

  What drive did you use and what size it it?
  I think that not all HARD drive would be compatible because of the 28-bit LBA.

  The 28-bit LBA supports hard disks up to 128GB and if the IDE controller supports only 28-bit LBA then it may happen that more large drives would not be recognized by the BIOS.

• HP X 705 PEN DRIVE NOT DETECTED IN ANY PC

  I plugged my USB on my laptop, and he asked me to dial before use. I formatted and the format has been successful. After that I was transferring some of my files and suddenly the USB connection has been lost due to unknown reasons. I reinserted it and then found out that it is not detected. I tried by assigning a drive letter in disk management, but I couldn't see my pen drive listed. I also tried to connect to other computers and devices, but none of them detected. I hope that there is not any problem with USB 2.0 as connection he used to work earlier. It could be a hardware problem and I can not return or ask the supplier I bought at snapdeal.

  Hello Hackerschoice,

  You say it happened when writing files to it. The player bumped or moved while this was happening?

  If the drive is not detected in ANY computer or device, then the reader has become physically corrupted or damaged in some way.

  If snapdeal will not honor a warranty for a recent purchase, your only recourse is to contact HP support directly for your country and ask questions on the help of the guarantee.

  Here is a link with the numbers of the different countries.

  HP technical support / phone call HP customer service

  Good luck.

• external DVD - BR drive not detected in windows 7

  Original title: confused beginner "Arrrgh".

  Installed new drive enternal DVD - BR, Trouble Shooter says: win. ' value' does not detect. Where how &? 'Enable '.

  Hi Kenneth,

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are unable to access the DVD drive - external BR. Please correct me that I misunderstood.

  Kenneth, I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Please provide us with additional information by answering a few questions below.

  1. what version of windows is installed on the computer?

  2. What is the brand and model of the external drive of DVD - BR?

  3. what exactly happens when you connect the external DVD - BR player to the computer?

  4. What is the error message that you receive?

  5. what store did you run on the computer to get the fixed number?

  6 other external devices detected via USB (Universal Serial Bus) ports?

  I would suggest trying the following troubleshooter and check if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  You can also download the latest driver for the external drive of DVD - BR on the manufacturer's Web site and check if it helps.

  Answer us with more information on this subject.

• LG ELECTRONICS Vortex Android Smartphone is not detected

  I downloaded the driver for share my LG Vortex for my lap top media after I tried all the options on my phone.

  My windows media player always says that I need to connect my device. Yes, I refreshed devices.

  I have a lot of pictures and a few songs on my phone and do not remove the chip memory unless absolutely necessary.

  Please tell me that won't be necessary, I know that I should be able to tie choose windows media sync, then watch or listen to my media. I'm pretty computer and I'm a little frustrated trying to get this to work. It should be simple.

  Hi syntheas,

  1 have you checked the device status in Device Manager and Windows Explorer?

  Step 1:

  If not detected, then try to run the Fixit of material and check:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 2:

  You can also check if the sync settings are correct in Windows media player.

  Set up a device to sync in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  For more information, please visit the links below

  Windows Media Player sync: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  Hope this information is helpful

• My Windows Media Player does not detect a burner.

  I recently downloaded Napster to download music and since I did, somehow now, windows media player is not allow me to burn the music I download on a CD, it says "connect a burner and restart player.» I can listen to music on the computer, but now it does not detect a burner. How to get windows to detect my burner?

  Hello mandyrose,

  Have you tried to uninstall the dvd via the Device Manager drive then restart PC to let Windows reinstall? You can do it. If the problem is still there, can give a try? It is a quick easy fix from Microsoft, here is the link: http://support.microsoft.com/kb/314060. You need to uninstall all third-party software (example: Roxio, Nero, or iTunes) from your computer before you make this correction. After you restart, you can reinstall your software and try again to see if that solves your problem. Otherwise, it could be a bad optical drive. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Inspiron 1525 integrated webcam not detected when the laptop is open, but works when it is closed

  I see that the webcam works (blue light is on I can open less then to halfway and see the desktop and a part of the computer in photo. then open more than half and get error webcam not detected.)

  Help please

  Hello

  Check with Dell technical support, online documentation and drivers and their known forums
  problems and solutions.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  -------------------------

  Help generic camera:

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Alienware 15 audio jack not detected

  I've seen a lot of posts on the problems of the audio jack but none with my system.  I have an AlienWare with Windows 10 15.  It does not detect the audio jack of 3.5 mm.  I have Creative Sound Blaster Recon3Di driver, says that it is up-to-date.  Tried to uninstall it a reboot, but it seems to remain installed.  When I plugged headphones and try to detect disabled and disconnected devices it shows nothing.  I can get USB working headset, but I really just want to plug into the headphone jack!

  Thanks for any help,

  Hello.

  I would test the audio driver, by changing the audio driver Creative SoundBlaster Recon with the native Windows audio driver. Here are 2 ways to do this.

  1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
  2. develop the 'audio controllers, video & game' and right click on Creative SoundBlaster Recon.
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Creative SoundBlaster Recon pilot, do it again but reverse steps 2-7 names].

  ===============================================================================

  Sometimes this procedure does not work with Windows 10, so here's another method, which is to remove all the Creative SoundBlaster Recon driver files.

  1. open Device Manager
  2. expand the section sound, video & game controllers.
  3. right click on the Creative SoundBlaster Recon and select uninstall.
  4. check the option to remove the software driver, click ok.
  5 reboot the laptop and go back to Device Manager and check again a Creative SoundBlaster Recon pilot. Keep the uninstall & reboot up to Creative SoundBlaster Recon is no longer under his... Controllers and "High definition Audio Device" (the native driver) is displayed in its place.

  [The reason why you have to go through the process more than once is because the driver for several drivers Creative SoundBlaster Recon files could be on the hard drive.] When a Creative SoundBlaster Recon driver is deleted, the following is installed if Windows can locate files. Windows installs the generic driver that after all the Creative SoundBlaster Recon files were deleted.]

  ============================================================================

  If you do not hear audio through the headphone jack to listen with a driver, then it is more likely to be a hardware problem.

• Bluetooth mouse not detected on Windows 8.

  Original title: mouse bluetooth problem

  A cleaning set to win 8 on Netbook Acer Aspire One 722. So far, so good except a 'Service Exception' alert. He himself worked and finished configuring updates at startup, but it is another question.

  My 'add a device' does not recognize my new Bluetooth mouse. I went to services and turned to automatic and always win 8 is not see it. The manual of the manufacturer says that the mouse is looking to be recognized because the light will blink. I went to gigabyte.com and the only available download is the manual. Flight mode: Off and Wi - Fi: on.  I read comments before I bought it, and others said they used it with Windows 8. I always use a Wi - Fi with this Netbook. I tried to turn on network discovery and sharing, as recommended through help? Still, the operating system does not see the mouse.

  System:

  Win 8: Acer Aspire One Netbook 722

  Bluetooth mouse:

  Gigabyte M7700B

  Thanks for any help you can provide.

  Hello

  Welcome to the Microsoft Community and thank you for the post in there.

  According to the description of the problem, you try to connect a wireless mouse to your computer, but it is not detected.

  Please write us with the following details.

  (1) you get an error message?
  (2) can you see the device in the Device Manager?
  (3) you are able to pair it with your computer?

  I would suggest a few troubleshooting methods. Follow the methods shown here.

  Method 1: Run the hardware and the resolution of the problems of the unit.

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Follow the steps below:

  (a) press Windows + W together.
  (b) writing Troubleshooting in the search to the corner box and press on enter.
  (c) click the Troubleshooting tab.
  (d) click view all in the upper left corner.
  (e) select the options of the equipment and devices in the list.
  (f) click Next to run the tool material and device.

  If the problem persists, proceed to the next method.

  Method 2: Download and install the driver for the mouse wireless from the manufacturer's website.

  Click on the following link and download and install the latest driver.

  http://www.gigabyte.com/products/product-page.aspx?pid=2933#DL

  If you do not get the driver for Windows 8, then you can install driver for any version in compatibility mode.

  Please follow the steps given below link:

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  I hope this solves your problem, please write to us if you have any question related to Windows.

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• my ipod is not detected by itunes

  Hello, so, as it is said, my ipod is not detected by itunes and it s not because taking usb does not work or has problems because it becomes a hard drive on my computer.

  I have tried everything but nothing works:

  I have reset my ipod and itunes, uninstalled, re installed, turn and turn on my computer and itunes and my ipod as well, I tried only everyt things written on the internet.  as I completely cleaned my ipod it, but now I'm stuck because I can t get my music back.

  and nothing worked, so I'm really frustrated and really need help please

  Thanks /.

  What is an iPod touch?   IPod touch does not appear as a USB storage directly on your computer.  An iPod nano can appear there.  The current nano iPod looks like this

  

  Also, is your computer running iTunes on a Mac or Windows PC?  If Windows, which free?

• Drive external DRIVE not detected after update of the Sierra

  I upgraded my Macbook Air Sierra this morning. Since then, whenever I plug in my external Seagate HDD, it is not detected in the Finder, or see a shortcut on the desktop. However, it is visible in disk utility.

  I connected the HARD drive even air to my friend Yosemite running, and it works as usual.

  How the drive is formatted?

  Post a screenshot of what you see in disk utility.

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.