NICs disappeared after applying the fix
Just tried to install the lastes for ESXi 5.1 patch (ESXi510-201210001) on a Genesis of ProLiant DL380 8 running via "install the esxcli software vib.
The order says that everything is ok, but after reboot the console screen displays the following message appears «no network found compatible adpaters...» "and the box is no longer accessible.
No idea how to fix the server and what happened?
Is this normal customer that a patch removes the network drivers and makes an unusable Server?
Thanks for any help.
See you soon
IIRC in this version DL380 Genesis NICS are not supported.
You remember to properly:
So, what is the recommended method when you apply the patches?
Using update instead?
Yes. As its name indicates, you use esxcli with the update command when applying updates. In this way, that he would not have replaced your driver tg3 with an older version.
Oh the good ol esxupdate, rip. But I have a few complaints about what esxcli now provides.
Tags: VMware
Similar Questions
-
BPEL console not until after applying the fix
Hi all
We have installed SOA suite install 10.1.3.1 with advance. The installation went well and we were able to access the console without errors. We then applied fix for upgrade to 10.1.3.3...
After you apply the fix, we are not able to access the BPEL console. Installation of the patch has gone well and we have not received any errors...
Newspapers said opmn:
==========================================================================
< 2008-10-30 17:48:53, 721 > < INFO > < wsif > WSIF0007I: using WSIFProvider 'oracle.tip.adapter.fw.wsif.jca.WSIFDynamicProvider_JCA' NamespaceURI 'http://xmlns.oracle.com/pcbpel/ '.
Provider WSIF custom Loadded 'oracle.tip.adapter.fw.wsif.jca.WSIFDynamicProvider_JCA '.
< 2008-10-30 17:48:53, 721 > < INFO > < wsif > WSIF0007I: using WSIFProvider 'oracle.tip.esb.wsif.WSIFDynamicProvider_ESB' NamespaceURI 'http://www.oracle.com/esb/ '.
Provider WSIF custom Loadded 'oracle.tip.esb.wsif.WSIFDynamicProvider_ESB '.
< 2008-10-30 17:48:53, 721 > < INFO > < collaxa > < ServerManager::loadAllDomains > all areas under D:\product\10.1.3.1\OracleAS_2\bpel\domains load
< DomainDescriptorManager::create > detected field descriptor version ' 2.0.6»
< 2008-10-30 17:48:53, 909 > < INFO > < default.collaxa.cube > < ServerManager::loadDomain >
*****************************************************************************
Oracle BPEL Server version 10.1.3.3.0
Build: 0
The generation time: Fri Jun 15 06:05:31 PDT 2007
Build type: free
Tag from the source: PCBPEL_10.1.3.3.0_GENERIC_070615.0525
< 2008-10-30 17:48:54, 049 > < INFO > < default.collaxa.cube.engine > < CubeEngine::load >
*****************************************************************************
BPEL area during the initialization of the descriptor file
'D:\product\10.1.3.1\OracleAS_2\bpel\domains\default\config\domain.xml '.
< 2008-10-30 17:48:54, 080 > < INFO > < collaxa > < ConnectionFactoryImpl::init > Initialized, factory connection jdbc/BPELServerDataSourceWorkflow
< 2008-10-30 17:48:54, 080 > < INFO > < collaxa > < ConnectionFactoryImpl::init > Initialized, factory connection jdbc/BPELServerDataSource
"< 2008-10-30 17:48:54, 440 > < version database INFO > < default.collaxa.cube.engine > < gsDomainSchemaManager::validateCompatibility > Detected ' 2.0.51.
< 2008-10-30 17:48:54, 440 > < INFO > < default.collaxa.cube.engine > < AdaptorManager::load > Loaded adapters for platform "ias_10g" of the datasource 'oracle '.
< 2008-10-30 17:48:55, 487 > < INFO > < default.collaxa.cube.engine > < AdapterStats::init: fact holder initializing statistics adapter for engine > by default
< 2008-10-30 17:48:55, 534 > < INFO > < default.collaxa.cube.engine > < FaultPolicyManager::loadFaultPolicies > added political fault line D:\product\10.1.3.1\OracleAS_2\bpel\domains\default\config\fault-policies\DefaultPolicy.xml
< 2008-10-30 17:48:55, 549 > < INFO > < default.collaxa.cube.engine > < FaultBindingsManager::loadFaultPolicyBindings > default connection file loaded:D:\product\10.1.3.1\OracleAS_2\bpel\domains\default\config\fault-bindings.xml
< 2008-10-30 17:48:55, 549 > < INFO > < default.collaxa.cube.engine > < CubeEngine::init >
OraBPEL 'default' BPEL responsible area.
*****************************************************************************
< 2008-10-30 17:49:03, 002 > < ERROR > < collaxa > < ProcessJob::execute > error connecting to http://testweb141.enterprisenet.org:7780
< 2008-10-30 17:49:04, 955 > < ERROR > < collaxa > < ProcessJob::execute > error connecting to http://testweb141:7780 / orabpel
< 2008-10-30 17:49:06, 080 > < ERROR > < collaxa > < ProcessJob::execute > error connecting to http://10.66.6.56:7780 / orabpel
< 2008-10-30 17:49:08, 065 > < ERROR > < collaxa > < ProcessJob::execute > error connecting to http://testweb141.enterprisenet.org:7780 / orabpel
< 2008-10-30 17:49:09, 112 > < ERROR > < collaxa > < ProcessJob::execute > error connecting to http://localhost:7780 / orabpel
Oc4j houses are alive but the HTTP_SERVER is down... Please help with some advice!
Thank youUncomment the line
d:/product/10.1.3.1/oracleas_2/Apache/Apache/conf/SSL.conf
should be down.
Please note that these patches will not have any impact, except if you want to enable SSL. If you do so in the future then we you get the ApacheModuleOSSL.dll file and place it in the d:/product/10.1.3.1/oracleas_2/apache/apache/Module directory.
see you soon
James -
ERR-7620 after applying the fix to the 5.0.2
After you apply the latest patch without error on our environment all our applications is no longer in effect.
They all end with
ERR-7620 could not determine the workspace for the application (application_id).
ORA-01403: no data found
anyone?
You can run
exec apex_instance_admin.enable_workspace(...name...);
commit;
to account_status the ASSIGNED value.
Kind regards
Christian
-
forms of Oracle is not opening after applying the fix 6i devoloper 19 (P 9935935)
Dear all,
I plan to upgrade version of forms of 6.0.8.25 to 6.0.8.28 following upgrade note developer 6i with Oracle Applications 11i [125767.1 ID]
and applied the Patch 9935935 after that, we don't have open forms and open the windows all three as usual, but after the third window, we are not able to get any window forms.
What is the problem, we can not find all errors and remain application services are working well...
Please give me solution for this?
Thanks in advance...java.lang.NoClassDefFoundError: com/tendance/squid/2.5.STABLE9/jscan/runtime/Session
Please see (11i: ' FRM-92050: unable to connect to the server "error when launching forms after update the JAVA JRE [1286604.1 ID] JInitiator Plugin).
Thank you
Hussein -
10.1.2.3 the FRM-92100 value after applying the fix
Hello
Yesterday, we have applied the patch set 10.1.2.3 and patch 7482020 on a Windows Server. Today, about 20% of our ended unexpectedly with error forms describe below after clicking on a button. Even if the PL/SQL code is begin null; end; the user would be disconnected from the Application Server. I searched on metalink but find nothing relevant. I can't find nothing related between the buggy forms or different shapes non-buggy.
Can anyone help please?
Francis
-Error log-
Forms: FRM-92100
Java Console:
java.lang.NullPointerException
at oracle.forms.handler.UICommon.setFVP (unknown Source)
at oracle.forms.handler.UICommon.setFVP (unknown Source)
at oracle.forms.handler.UICommon.onUpdate (unknown Source)
at oracle.forms.handler.ComponentItem.onUpdate (unknown Source)
at oracle.forms.handler.ButtonItem.onUpdate (unknown Source)
at oracle.forms.handler.UICommon.onUpdate (unknown Source)We have executed with this patch for a long time now and have never encountered a problem like this.
Using JInitiator or the Java Plugin (recommended)?
Have you tried to empty the cache memory of the POT on the client? Your FMB can also be damaged somehow - have you tried their reconstruction on a Suite of developer with the exact same patch as the Application Server level?
You can also try the new patch 7703734super-fusion, which replaces the previous Super-fusion 7482020 and see if that helps somehow.
If this does not help, you must connect a SR on Metalink and get support to help you resolve it.
Hope this helps,
Jacob -
ADF 11.1.2.4.0 issues in IE 11 even after applying the fix 18277436
JDeveloper 11.1.2.4.0, applied patch 18277436 for IE 11, when trying to export to pdf or export to excel, the file dialog box like"save you = _UTF_8_Q_HISTORIC = 5F. I can't save the file and open the file.
His work in the browser Chrome without any problem.
Any thoughts on how to solve this problem?
Thanks in advance
Vincent
Remove the patch and instead apply code as described here:
And let me know what happens
-
Invalid object after you apply the fix of fa
Hi all
Earlier I had applied the patch for FA & generate the message files in the build files of applications menu. How can I find out that there is no valid objects for FA after applying the fix for me running schema compile adadmin applications to compile invalid objects. What is the example the message object not valid? What is the effect if I run APPS compile schema even though there is no object not valid occurs? Please advice.Mish,
Take a look at the following note:
Note: 314538.1 - how to compile invalid objects
https://MetaLink.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=314538.1 -
RH10 errors generating WebHelp after having applied the fixes
I'm more able to generate WebHelp after applying the patches on 10 of RoboHelp.
Yesterday, my IT Support person helped me install the patches for RoboHelp 10 that have been listed in the site of Van Weelden:
http://www.wvanweelden.EU/articles/RoboHelp-patches-and-updates
Aside: Patch 10.0.1 was a little hassle to get to (necessary to uninstall and reinstall the RH10) work. The following hotfixes have been easily applied.
Now, when I try to generate WebHelp output, I get the below error messages and if I click on the view, it opens a browser window and I see no output. I see
, but I'm not sure if it was ever resolved.Excerpt from messages in the view of my output:
Initializing the compiler...
Generation of WebHelp 5.50 (10.0.0.287)...
Error: Could not find xml definition file C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML\webhelp5Ext\template_skin\webhelp5skin.xml.
Model error: cannot resolve macro: WEBHELP_TEMPLATE.pane.navpane.dhtml
Model error: cannot resolve macro: WEBHELP_TEMPLATE.pane.navpane.list
Model error: cannot resolve macro: WEBHELP_TEMPLATE.pane.toolbar
Model error: cannot resolve macro: WEBHELP_TEMPLATE.pane.minibar
Model error: cannot resolve macro: WEBHELP_TEMPLATE.topic
Model error: cannot resolve macro: WEBHELP_TEMPLATE.frame
Processing of the data in the table of contents...
Processing data from Context-sensitive-Help...
-(I removed from the list of topics that he updated).
The application model of WebHelp 5.50...
.......................... Model error: cannot resolve macro: WT_DS_SEARCHFORM_GO in E:\NVivo\User Documentation\Main\TRC\Technical Resource Center\! SSL!\WebHelp\whfform.htm
.............................................."
Error: Failed update Template file whskin_frmset010.htm
""
Error: Failed update Template file whskin_frmset01.htm
""
Error: Failed update Template file whskin_frmset0.htm
"...........................
Completed the model application in 1 seconds
Mark the transformation of the Web...
Finished compiling WebHelp in 12 seconds
Compilation is complete.
Thanks in advance for your help.
Rose
I was able to solve this problem. It seems that, in the frame following the instructions for applying the patch to WebHelp, fix for Internet Explorer 10, some files have been deleted.
Fortunately, my TI support person had made a backup of the folders before him applied the patches and was able to copy the missing files.
I'm now able to generate again the WebHelp.
-
Applying the fix failed with the error code 41
Hello world
I was applying the fix to 12838161 the value of Oracle 11 g R2, but the operation failed with error code 41. Can someone help me with this please? I checked the log in $ORACLE_HOME\cfgtoollogs\opatch, but I couldn't do much from there. This is how the log file looks like to...
[October 11, 2011 12:26:39] OPatch invoked as follows: 'apply '.
[October 11, 2011 12:26:39] Oracle home: E:\oracle\product\11.2.0\dbhome_1
Inventory Center: C:\Program Files\Oracle\Inventory
from: n/a
OPatch version: 11.2.0.1.8
YES version: 11.2.0.1.0
Location of the log file: E:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opatch2011-10-11_12-26-38PM.log
[October 11, 2011 12:26:39] History of patch file: E:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opatch_history.txt
[October 11, 2011 12:26:39] From ApplySession kills Sep 11 12:26:39 GMT + 03:00 2011
[October 11, 2011 12:26:39] Starting apply Session Tue Oct 11 12:26:39 GMT + 03:00 2011
[October 11, 2011 12:26:39] PatchObject::PatchObject() Patch location is E:\oracle\12838161
[October 11, 2011 12:26:39] PatchObject::createPatchObject() Patch location is E:\oracle\12838161
[October 11, 2011 12:26:39] PatchObject::createPatchObject() patch location is E:\oracle\12838161
[October 11, 2011 12:26:39] OPatch will do the following:
[Discovery of oracle Home]: Configure and Validate Oracle Home information.
[Prerequisite to apply]: invoke the prerequisites to see if the patch can be applied.
[Patch conflict detection to apply patch]: check if no conflict with already installed patches at Oracle.
[October 11, 2011 12:26:39] - Oracle Home discovery -
[October 11, 2011 12:26:39] Application of the interim fix '12838161' to the OH 'E:\oracle\product\11.2.0\dbhome_1 '.
[October 11, 2011 12:26:39] Start applying the patch to local system Tue Oct 11 12:26:39 GMT + 03:00 2011
[October 11, 2011 12:26:39] Check the environment and performing preliminary controls...
[October 11, 2011 12:26:42]-Patch conflict detection to apply patch.
[October 11, 2011 12:26:42] Patch 12838161 has no conflicts/superset with any other patch treated so far
[October 11, 2011 12:26:42] Audit of conflict to patch: 12838161
[October 11, 2011 12:26:42] checking conflicts/supersets to patch: 12838161 with patch: 12838161
[October 11, 2011 12:26:42] Start applying initScript to Tue Oct 11 12:26:42 GMT + 03:00 2011
[October 11, 2011 12:26:42] Complete the initScript apply to Tue Oct 11 12:26:42 GMT + 03:00 2011
[October 11, 2011 12:26:42]-prerequisites for automatic restoration.
[October 11, 2011 12:26:43] - required to apply.
[October 11, 2011 12:26:43] Prior running check...
[October 11, 2011 12:26:43] Space required: 2010396568
[October 11, 2011 12:26:43] PREREQ checkPatchApplicableOnCurrentPlatform spent to patch: 12838161
[October 11, 2011 12:26:43] The following files are present:
E:\oracle\product\11.2.0\dbhome_1\bin\orageneric11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oraclient11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orapls11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oracommon11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oraxml11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oranhost11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oran11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oranro11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orantcp11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orazt11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orahasgen11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oci.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orasql11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oraldapclnt11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oraztkg11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orannzsbb11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orasnls11.dll
[October 11, 2011 12:26:43] The prerequisite checking 'CheckActiveFilesAndExecutables' failed.
The details are:
The following files are present:
E:\oracle\product\11.2.0\dbhome_1\bin\orageneric11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oraclient11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orapls11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oracommon11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oraxml11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oranhost11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oran11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oranro11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orantcp11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orazt11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orahasgen11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oci.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orasql11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oraldapclnt11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\oraztkg11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orannzsbb11.dll
E:\oracle\product\11.2.0\dbhome_1\bin\orasnls11.dll
[October 11, 2011 12:26:43] [Error during the prerequisite to apply phase] Detail: YES - 67074:ApplySession failed when prior checks: checking prerequisites 'CheckActiveFilesAndExecutables' failed.
[October 11, 2011 12:26:43] YES - 67035:System intact, OPatch will not try to restore the system
[October 11, 2011 12:26:43] Finishing ApplySession in Mar Oct 11 12:26:43 GMT + 03:00 2011
[October 11, 2011 12:26:43] Total time spent waiting for user input is 0 seconds. Finishing of Tue Oct 11 12:26:43 GMT + 03:00 2011
[October 11, 2011 12:26:43] Location of the log file: E:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opatch2011-10-11_12-26-38PM.log
[October 11, 2011 12:26:43] Description of the battery: oracle.opatch.PrereqFailedException: Prerequisites check 'CheckActiveFilesAndExecutables' failed.
[October 11, 2011 12:26:43] StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:4799)
[October 11, 2011 12:26:43] StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3888)
[October 11, 2011 12:26:43] StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5853)
[October 11, 2011 12:26:43] StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1787)
[October 11, 2011 12:26:43] StackTrace: oracle.opatch.OPatch.main(OPatch.java:651)
Here are the steps I followed.
(1) stop the database
(2) the Oracle services stopped
(3) EPS set Oracle_home
(4) after unzip in the patchfolder directory
(5) and applied the patch via opatch utility
Oracle DB: 11g R2
OS: Windows 2008 R2 64 bit
Kind regards
Faisal katheriDid you start Oracle services again? In this case, you will need to repeat the procedure I mentioned. Thanks to my experience stop services do not unlock some dll, so OPatch fails with error code 41. After the reboot run OPatch with administrator privileges.
Werner
You can also view this metalink note:
GRAVE: YES - 67074:ApplySession failed when prior checks: checking prerequisites 'CheckActiveFilesAndExecutables' failed. [1348018.1 ID]
It helps to identify the program or process that hold the locks.
Edited by: oradba the 11.10.2011 17:19
-
TimeCapsule downgrades WiFi 2.4 GHz after applying the firmware update v7.6.7
After applying the firmware update v7.6.7 free WiFi to TimeCapsule is now 2.4 Ghz instead of 5 Ghz.
It was the update of the firmware with certainty that has made this... no doubt about it:
- My mouse bluetooth interference notice when my MacBook is connected to WiFi 2.4 Ghz;
- Before the update, everything is OK
- After updating, my mouse mouse start jittering
- < alt-click > WiFi icon in the menu bar confirms: the connection is now 2.4 Ghz
Restart to e TM Mo doesn't change anything.
In the TC WiFI options tried to put another name to the network successfully, but only 5 GHz can not connect to it: timeout error every time.
Tried the hard reset of TC and reconfigure the WiFi... the same result, but with a difference:
- Setting an SSID separated for 5 GHz connection (in the WiFi options) has now created a network I can access.
- However, this is not the best solution... I don't want 2 SSID.
It is not the first time Apple breaks things with updates... and I see people move away from Apple to this kind of situations.
I also had bad experiences with OS updates lately and postpone the as much as possible.
The problem is that I can't go back... or can I?
Any help is welcome.
THX
The problem is that I can't go back... or can I?
Of course, you can, but it may or may not help.
Open AirPort Utility
Click on the image of the AirPort base station
Hold down the option key on your Mac while you click on the version number of the firmware
A drop down menu appears
Choose the version of the firmware you want to use
-
APEX 5.
Dynamic action for the CHANGE event does not work after applying the filter on IR.
Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry
Real action
Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code
Is TI WHEREAS behavior?
I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.
Concerning
mdyla
mdyla wrote:
It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.
Set the dynamic scope of the event action to Dynamics.
-
Hi all
Recently, we have applied the patch on one of our instance ASM, we've reached ORA-04031 on ASM instance. Oracle, we propose to apply the patch and one of my colleague came with these steps and
We have applied the fix successfully. I have a few questions about these steps. I would be grateful, if you could offer your expert advise on my questions.
In step 1, we use SRVCTL to stop all the instacnes running on a single box. We have about 46 instance that is running on this node
My question is, setp 1, mean-o and s flag done.
In step 2, this makes sudo for < GRID_HOME > is to use the rootcrs.pl - unlock.
On step 4, we have applied the patch to GRID_HOME, but must understand usage - oh flag
New on stp 5, why we need to perform step number 5
It starts at step 6, all instances by using srvct, but just curious, by the way, why we need to provide the file ampxt1d1_status with flag - n.
1. this task is to apply the patch of the ASM
2. stop all the instance running on ampxd1d1.
srvctl stop immediate home o < ORACLE_HOME > s/u01/patches/tmp/ampxt1d1_status n < nide > t
3. run the script in root of pre.
sudo /u01/app/11.2.0.3/grid/crs/install/rootcrs.pl-deverrouiller
4. apply the patch using opatch
opatch apply - oh local /u01/app/11.2.0.3/grid-/u01/patches/tmp/13951456
5 run the suite.
sudo /u01/app/11.2.0.3/grid/crs/install/rootcrs.pl-patch
6 start the instance.
srvctl start House o /u01/app/oracle/product/11.2.0.3/dbhome_1 s/u01/patches/tmp/ampxt1d1_status n
Concerning
Hello
(1) the o Specifies the oracle House and s specifies a path for the command "srvctl stop home" store the State of the resources. in this case, command (srvctl stop home - o) stops anything running oracle home.
(2) rootcrs.pl with - unlock flag unlocks the CRS home and make it ready to patch.
(3) the - oh indicator command opatch specifies oracle home to work on. This takes precedence over the ORACLE_HOME environment variable
(4) - patch flag of the rootcrs.pl command specifies the oracle home is upgraded and lock it.
(5) control of House o srvctl start will start the oracle home and all service runs from this House.
Kind regards
-
Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.
The adobe reader program no longer exist in my C drive.
I use windows 8 and tried reinstalling countless times, disable the anti-virus, restarted my computer, etc.. Have also tried uninstall adobe, but the program does not exist more...
Please help because my exams are in 5 days and all my study material must be opened with pdf!
Thanks in advance.
Hi, Fabien,
Is - this directory exists on your system? -C:\Program Files (x 86) \Adobe If Yes, do you think that Adobe Reader folder in there?
Please use the tool on your system: http://labs.adobe.com/downloads/acrobatcleaner.html
Reinstall Acrobat Reader DC on your system? Adobe - Adobe Acrobat Reader DC Distribution
Kind regards
Rahul Tyagi -
The mouse disappears after using the touch screen
I have an ASUS PC S400CA-DH51T (touch screen) that I had for about two weeks and worked without problems. But since maybe two days ago my cursor randomly started to disappear after I installed a slider custom (from DeviantArt, with three files .cur, normal, for the small hand selector and a third for the hourglass near the cursor). FN + f7 does nothing, and not more than to do a clean boot.
I noticed that the problem seems to be that the cursor disappears when I touch the screen when I have a defined custom cursor and does not come when I move the mouse with the touch pad. But I can touch the screen and mouse just once that I move it once I reset the pointer to default.I just tried using a different custom cursor, and the same problem occurs. But in both cases, my mouse is displayed whenever I have spend on something, or the hourglass next to my mouse is displayed (which I have customized for cursors). Is it possible to fix this? I don't want to use the default windows cursor.It worked for me, and I think it will be for everyone. Great work!
-
An error occurred during rebinding of application program after applying the patch patch p9239090
Dear experts,
I put my installation Oracle of R12.1.1 to R12.1.3 level.
I made a request patch 9239089 successfully, but system showed me an error after the application of patch p9239090 . (An error occurred during re-Association of the application programs. ) )
The log file is
Start of session AutoPatch *.
AutoPatch version: 12.0.0
AutoPatch started: Tuesday, June 17, 2014 06:34:34
APPL_TOP is defined on/u01/applr12/apps/apps_st/appl
The value of NLS_LANG environment is: American_America.US7ASCII
NLS_LANG value for utility AD run is: AMERICAN_AMERICA. US7ASCII
Backup restart files, as appropriate. Fact.
Your previous session to autopatch did not stand up to the end.
You want to continue your previous session to AutoPatch [Yes]? There
You are about to apply a patch for the installation of the Oracle Applications
in your ORACLE database "PROD".
using ORACLE executable files in ' / u01/applr12/apps/tech_st/10.1.2'.
This is the database correct [Yes]? Yes
Connecting to the SYSTEM... Successfully connected.
Already asked the ORACLE username and password
Application Object Library.
(The name of user and password given was: APPLSYS / *)
Connecting to APPLSYS... Successfully connected.
The status of the different features in this performance of the AutoPatch is:
<-feature version in - >
Function Active? Flags of APPLTOP data model
------------------------------ ------- -------- ----------- -----------
CHECKFILE Yes 1 1 O N N O N O
PREREQ Yes 6 6 O N N O N O
CONCURRENT_SESSIONS NO. 2 2 Y O N Y O N
PATCH_TIMING Yes 2 2 O N N O N O
PATCH_HIST_IN_DB Yes 6 6 O N N O N O
SCHEMA_SWAP Yes 1 1 O N N Y Y Y
JAVA_WORKER Yes 1 1 O N N O N O
CODELEVEL Yes 1 1 O N N O N O
Product file information...
Reading language information and territory of file...
The language information of applUS.txt reading...
AutoPatch WARNING:
Product data file
/U01/applr12/apps/apps_st/appl/Admin/zfaprod.txt
There is no product "zfa".
This product is registered in the database, but the
above the file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch WARNING:
Product data file
/U01/applr12/apps/apps_st/appl/Admin/zsaprod.txt
There is no product "zsa".
This product is registered in the database, but the
above the file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch WARNING:
Product data file
/U01/applr12/apps/apps_st/appl/Admin/jtsprod.txt
There is no product "jts".
This product is registered in the database, but the
above the file does not exist in APPL_TOP. The product
will be ignored without error.
Currently, the following is installed:
Status of language code
---- --------------------------------------- ---------
American base of American English
Your base will be AMERICAN.
Set up the module information.
Reading database for more information on the modules.
Saving the module information.
Connecting to the SYSTEM... Successfully connected.
Connecting to APPLSYS... Successfully connected.
AD code level: [B.3]
STRT_TASK: [AutoPatch startup after software] [] [Tuesday, June 17, 2014 06:34:49]
Connecting to applications... Successfully connected.
STRT_TASK: [password validate schema] [] [Tuesday, June 17, 2014 06:34:49]
STOP_TASK: [password validate schema] [] [Tuesday, June 17, 2014 06:34:49]
STRT_TASK: [history of Patch Upload information filesystem] [] [Tuesday, June 17, 2014 06:34:49]
Try to get a lock...
About to attempt of instantiation of the snapshot of the current view: Tuesday, June 17, 2014 06:34:50
Attempt to instantiate the snapshot current view...
Was already instantiated. If no instantiation made this time.
Trying to instantiate the snapshot of the current view: Tuesday, June 17, 2014 06:34:50
S T E R T O F U P L O A D *.
Start date: Tuesday, June 17, 2014 06:34:50
0 "left on" files uploaded to DB javaupdates.txt: Tuesday, June 17, 2014 06:34:50
0 patches downloaded from the history of patch ADPSV format files: Tuesday, June 17, 2014 06:34:50
Download information on files copied during previous tests...
Download ' / u01/applr12/apps/apps_st/appl/admin/PROD/out/filescopied_15760.txt '...
Start instant processing of information
No records processed = 5012
Collecting statistics for the table 'AD_CHECK_FILE_TEMP '...
Fact.
Update of the snapshot Tables... Start time: Mar 17 June 2014 06:34:53
Fact update of the snapshot for the above lines Tables... End time: 17 June 2014 Mar 06:35:50
No records processed = 10110
Update of the snapshot Tables... Start time: June 17, 2014 Mar 06:35:51
Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:36:24
No records processed = 15110
Update of the snapshot Tables... Start time: Mar 17 June 2014 06:36:25
Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:36:51
No records processed = 20130
Update of the snapshot Tables... Start time: Mar 17 June 2014 06:36:52
Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:37:16
No records processed = 25130
Update of the snapshot Tables... Start time: Mar 17 June 2014 06:37:16
Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:37:49
No records processed = 30842
Collecting statistics for the table 'AD_CHECK_FILE_TEMP '...
Fact.
Update of the snapshot Tables... Start time: Mar 17 June 2014 06:37:50
Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:38:01
Completed the instant processing of information
1 "left on" filescopied_ < session_id > .txt files uploaded to DB: Tuesday, June 17, 2014 06:34:50
****************** E N D O F U P L O A D ******************
End date: Tuesday, June 17, 2014 06:38:01
STOP_TASK: [history of Patch Upload information filesystem] [] [Tuesday, June 17, 2014 06:38:01]
Already asked the name of the patch directory.
(The answer was: / u01/9239090)
STOP_TASK: [AutoPatch startup after software] [] [Tuesday, June 17, 2014 06:38:01]
Already asked the name of the driver of the patch file.
(The answer was: u01/9239090/u9239090.drv)
STRT_TASK: [execute a driver file single patch] [] [Tuesday, June 17, 2014 06:38:01]
STRT_TASK: [steps before the part of copy] [] [Tuesday, June 17, 2014 06:38:01]
STRT_TASK: [pilot Initial processing steps] [] [Tuesday, June 17, 2014 06:38:01]
STOP_TASK: [pilot Initial processing steps] [] [Tuesday, June 17, 2014 06:38:01]
STRT_TASK: [get Oracle Applications release and read the driver file] [] [Tuesday, June 17, 2014 06:38:01]
STRT_TASK: [driver and logic output for a reboot] [] [Tuesday, June 17, 2014 06:38:01]
STRT_TASK: [read the release list save file] [] [Tuesday, June 17, 2014 06:38:01]
Playlist version save file...
Release list reading registered the file
STOP_TASK: [read the release list save file] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [driver and logic output for a reboot] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [get Oracle Applications release and read the driver file] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [Prereq logic check] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [Prereq logic check] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [patch question Ask translated] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [patch question Ask translated] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [determine bugs apply] [] [Tuesday, June 17, 2014 06:38:03]
Journal and news file synchronization point:
Tuesday, June 17, 2014 06:38:03
Deactivation of the actions that make reference to unrecognized products.
Journal and news file synchronization point:
Tuesday, June 17, 2014 06:38:03
End of unrecognized product verification.
STOP_TASK: [determine bugs apply] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: process action [Options] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: process action [Options] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: Edit actions for "bootstrap" mode] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: Edit actions for "bootstrap" mode] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [Ask for the number of parallel workers] [] [Tuesday, June 17, 2014 06:38:03]
(The number of parallel workers is: '8')
STOP_TASK: [Ask for the number of parallel workers] [] [Tuesday, June 17, 2014 06:38:03]
AutoPatch will run in parallel mode.
STOP_TASK: [steps before the part of copy] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [Not part of copy] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [applied the new applterr.txt] [] [Tuesday, June 17, 2014 06:38:03]
Didn't need to apply new applterr.txt.
STOP_TASK: [applied the new applterr.txt] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [AutoSplice applprod.txt and applUS.txt] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [AutoSplice applprod.txt and applUS.txt] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [Version searching for driver files] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [Version searching for driver files] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [copy driver files] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [copy driver files] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [driver files Forcecopy] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [driver files Forcecopy] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [screen invalid files for this configuration] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [screen invalid files for this configuration] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [read the file driver files for a list of valid files] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [read the file driver files for a list of valid files] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [libout Perform actions] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [libout Perform actions] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [To conduct an audit of version] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [To conduct an audit of version] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [determine the directories to create] [] [Tuesday, June 17, 2014 06:38:03]
To jump...
Determine the directories to create for driver specific
Since no action is present for this driver file
STOP_TASK: [determine the directories to create] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [determine executables to bind] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [determine executables to bind] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [determine the executable files to generate Forms] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [determine the executable files to generate Forms] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [library files determined PL/SQL to generate reports] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [library files determined PL/SQL to generate reports] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [files determine the reports to generate] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [files determine the reports to generate] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [determine to build the files of messages] [] [Tuesday, June 17, 2014 06:38:03]
To jump...
Determine if you need to generate messages for driver files specified
Since no action is present for this driver file
STOP_TASK: [determine to build the files of messages] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [Find bugs with any active] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [Find bugs with any active] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: custom view [files] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: custom view [files] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [copy files] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [copy files] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [Forcecopy files] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [Forcecopy files] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [Perform actions of libin] [] [Tuesday, June 17, 2014 06:38:03]
STOP_TASK: [Perform actions of libin] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [create directories] [] [Tuesday, June 17, 2014 06:38:03]
To jump...
Create specific directories pilot
Since no action is present for this driver file
STOP_TASK: [create directories] [] [Tuesday, June 17, 2014 06:38:03]
STRT_TASK: [Relink executable] [] [Tuesday, June 17, 2014 06:38:03]
Reissue of executable links...
An error occurred during re-Association of the application programs.
Continue as if it was successful [No.]: No.
Release includes the hash table
Release fixes hash table
Hash table freeing basedons
Releasing entities hash table
You must check the file
/ U01/applr12/Apps/apps_st/Appl/admin/prod/log/adpatch_901
to find errors.
Kind regards
Dear X E H E R
I have faced this message also when installing
ATTENTION: All workers have failed or are pending:
Failed: File WFRESGEN worker 1.
Failed: File WFRESGEN worker 2.
Failed: File WFRESGEN worker 3.
ATTENTION: Fix the worker failed above the Manager to continue.
What it means?
Kind regards
Ahmad
Maybe you are looking for
-
Satellite Pro A300: Problem of Windows Recovery
Trying to reinstall XP. Reboot the machine with the recovery disk, the application of recovery starts. Select options and then he began unpacking. Comes to 7% and stay still for more than 2 hours.I tried to reinstall Windows XP on my drive but fails
-
IPhone 6 more will be not - care recognized
My battery died yesterday, I plugged it in the same cable that I have every night, and 8 hours later, he was not charged. I have reset (home button and lock at the same time). The device displays the icon and then in about 1 minute vibrates twice a
-
Where is the extended warranty of Porteges?
I bought a Portege A200 but can't find a extended warranty with the purchase. Of course, this is not normal? DIZ
-
Satellite Z830 - backup on USB storage drive recovery
I need to make the backup of this Z830 recovery system.But unfortunately, the system does not recognize the usb storage drive to make this recovery. Obviously, the storage usb drive have plenty of space and OK to work on this Z830. Any suggestions?Th
-
Read the data in the first column selected in a multicolumn listbox
When a line is selected in a ListBox multicolumn (1 point), how can I go on reading the data in the first column?