Nighthawk R8000 to Virgin Media Super Hub 2 connection problem.

Similar Questions

• is my Virgin media Super hub 2ac causing AirPort Extreme restart?

  I'll try and make this short.

  I recently had a hub great media virgins 2ac upgrade to a great hub. Before that, I have not had any problems with my network or wifi. And became 150 MB of download and upload 12.

  I have two extremes of the Apple Airport, one as a primary router and the other as an extension of network (super hub is modem mode) the extreme second is connected via Ethernet to a voltage adapter.
  The problem is that if I use a wired device or wireless broadcasting data continuously for more than 15-25 minutes (22 minutes is the sweet spot) and then the main AirPort Extreme will restart and drop the wifi.

  I did the following:
  Restart all devices (works temporarily)
  Changed all wifi channels
  Off to IPv6
  Bought a new AirPort Extreme
  Bought new cables
  Hard wired devices previously on wifi

  The key is that I'm out of ideas. The only thing that has changed is the super hub, everything else is the same. Is it possible from that great hub is the original AirPort Extreme resets automatically?

  Any help welcome because it leads me to the top of the wall!

  One thing that comes to mind. You mentioned that you have placed the new super hub modem mode. Do you know if this also turns off Wi - Fi hub as well? If it does not then it is possible that you found the Wi - Fi interference between the super hub and AirPort Extreme connected on it.

• Cannot connect to Virgin Media Home Hub with Atheros AR5007EG wireless adapter

  My brothers computer has problems to our Virgin Media Home Hub wireless conecting. I contacted Virgin Media Services customer and they say that the driver is the worng version. The computer has a driver adapter G series and we need a driver to adapter N series. What is the difference between the two, and where I could get the adapter driver series N of for the Atheros AR5007EG Wireless Adapter?

  I hope someone can help

  Hi Williams,

  Thanks for posting to the community by contacting Microsoft.

  The drivers are developed by the hardware manufacturer. I suggest you to contact the manufacturer for more information about the driver and support:

  https://support.Atheros.com/

  Let us know if it helps.

• Windows media center xbox 360 connection problem

  Hi, this is the message shown on the screen:

  "Connection completed. The xbox 360 has been disconnected because and request launched unexpectedly UI. You want to reconnect? »

  This occurs when WMC tries to connect with the Extender Setup. I followed all the steps to configure the Extender according to the microsoft Web site. But something does not work. HELP Please!

  Hi Riclop,

  Thanks for posting on answers.com.

  First, disable the program anti-virus or firewall that runs on your computer and check if the problem persists.

  Note: because some anti-virus software will cause conflicts between unexpected applications, please temporarily disable any antivirus, firewall or anti-spam on your computer programs.

  This problem occurs if the floating language bar is enabled on the Windows Vista-based Media Center computer. This configuration closes the connection between the Media Center Extender and the Media Center PC.

  To resolve this problem, change the settings of the Media Center Extender language bar. To do this, follow these steps.

  Step 1: Configuring settings on the Windows Vista - based Media Center computer

  1. Click Start , type intl.cpl in the Start Search box and press ENTER.
  2. On the keyboards and languages tab, click Change keyboards.
  3. On the Language bar tab, click docked in the taskbar under options from the language bar.
  4. Click OK.
  5. On the administration tab, click copy to reserved accounts.
     If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  6. Click on the checkbox by default (new users) user account , and then click OK twice.
  7. Click Startand then click Windows Media Center.
  8. Click tasks, and then click settings.
  9. Click Extender, and then on the Xbox 360.
  10. Click Uninstall, and then close Windows Media Center.

  Step 2: Configuring the settings of the Xbox 360 console

  1. In the System of the Xbox interface section, select computers.
  2. Select Windows Media Center, and then press the A button.
  3. Select Disconnect.
  4. Press the B button repeatedly until you return to the System section.
  5. In the media of the Xbox interface section, select Media Center.
  6. Advance in the instructions on the screen to get the 8-digit setup key.
  7. Note the setup button.

  Step 3: Configuring the settings on the Windows Vista - based Media Center computer

  1. Click Start and then click Windows Media Center.
  2. Click tasks, and then click add extender.
  3. Click Nextand enter the 8-digit setup key you obtained media of the Xbox interface section.
  4. Follow the prompts to complete setup of Windows Media Extender.

  When you copy these settings for reserve accounts in the 1st step, you change the settings of language bar for all new users that are created on the Media Center computer. After you add the Windows Media Extender, you can reverse these changes so that all new users will have a floating language bar. To do this, follow these steps on the Windows Vista-based Media Center computer:

  1. Click Start , type intl.cpl in the Start Search box and press ENTER.
  2. On the keyboards and languages tab, click Change keyboards.
  3. On the Language bar tab, click floating on the desktop under the language bar options.
  4. Click OK.
  5. On the administration tab, click copy to reserved accounts.
      

     If you are prompted for an administrator password or for confirmation, type the password, or click continue.

  6. Click on the checkbox by default (new users) user account , and then click OK twice.

  You can go through the article below:
  http://support.Microsoft.com/kb/934542

  Kind regards

  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Virgin Media hub great connection

  Hi all, just to upgrade to a new super hub Virgin Media-150 200mbs - everything works fine.

  However, my Airport Express (used for streaming music) refuses to connect.

  EI appears in Airport utility, but when you try to connect by using the SSID name of the network and the router password - he wrote himself in the AE OK but then disappears and cannot be located by the Airport utility longer?  You must reset the AE and start over, but still does not recognize the SSID or password?

  I used the AE for many years on my old router VM without any problems, but it is causing a lot of frustration!

  That I am, I am doing wrong or else is AE compatiable with the new plate rotating super VM?

  Any advice would be appreciated.

  Thank you all...

  Plug it into the computer and do the installation via ethernet.

  Wireless configuration by wireless looks like sawing off the branch to that which you are sitting.

  The original express N is very old, but if she worked on the old router it should work on the new... but you need to give me more details.

  For example the new router for VM... It is dual band? Could you try to configure the Express to join the wrong group.

  A lot of problems when you try to match wireless of different brands.

• Unable to connect to the network using the super pole, Virgin media

  Original title: Wireless Connection, it connects, but you cannot use the internet laptop, acer 7520on

  Hi tried to connect portable to new super Virgin Media hub he connected but could not get on the internet all I tried sometimes hidden I have a laptop on the same system is not a problem I do following Phil

  Hello

  Do you have an error message when you try to connect?

  Perform the steps in the link and check.

  The Super hub troubleshooting blank media

  Hope this information helps.

• Photosmart more B209a_m: Virgin Super Hub does not connect with the wireless printer

  We recently upgraged to a new blank media 3 hub, the printer is connected to a Hp Windows Vista desktop via USB, other devices (laptops and tablets) could access the wireless printer when the computer is turned on.

  I also created the same printer to be used wireless by the other devices without the Office of marketing, it was a pain having to keep it logging on when he fell asleep. The printer had a different name if you are using one.

  After that the hub of the Virgin was installed I can is no longer using the printer without the Office being wireless, the new Center can not find the printer connects as is done before that other laptops, I had no problem with my old hub and a separate router.

  I've tried everything as suggested by Virgin (not much there) and reinstalled my drivers for the printer. Any suggestions what I can do?

  Hi @Confused_Nanna,

  Welcome to the HP Forums!

  I read your post about how you cannot connect your HP Photosmart b209 printer to your wireless network. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, printer is offline (Windows) as well as this guide, the printer is not maintaining the wireless connection.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• G505s and Virgin Super Hub

  Really pleased with this computer. Recently updated my internet hub to a Virgin Super Hub. I now can't get a wireless connection of wondows 8.0. When I switch to Windows 8.1 I get the message "unidentified network". I can connect via ethernet cable no problem.

  The wireless adapter is broadcom 802.11n network adapter

  Ipconfig confirms the hub is affecting an ip address for the G505s but will not allow connection internet. The hub admin confirms utility. Hub ping does not return anything.

  3 other laptops (including 2 Lenonovos on win 8.1) and 4 smartphones connect to internet via the new hub with no problems. I did the following: -.

  Restarted hub - many times

  Re-installed win 8 and 8.1 twice

  Follow-up of all win 8 and 8.1 updates

  Re-installed the driver Broadcom Wireless adapter - 3 times

  Tried the IP address physical address / gateway/SubnetMask etc.

  With the help of the Office of support from suppliers through various ipconfig and netsh commands

  Is this a problem with my network adapter?

  Jerry

  
  

• AirPort Extreme and Virgin super hub

  Hello

  I have a new hub great vm that I put in place in modem only mode and then using my AirPort Extreme of 2nd generation as the wireless router. Is there a reason why I would see lower broadband speeds like that implemented just vs using the super hub in router mode full. I get very fast BB with just the hub acting as the wireless router but it drops by half or even more with my extreme up to game. The problem is that the hub has the power of the terrible wireless signal? I was wondering if it's because of my extreme 2nd generation? Or perhaps a setting that is incorrect.

  appreciate any advice.

  Thank you

  PHil

  A 2nd generation AirPort Extreme is at less than 7 years and that almost 9 depending on where you purchased the product. On average, the useful lifetime of a router designed for domestic use is... average... about 5 years.

  You can reset the AirPort Extreme back to default settings and then set ip all over again, but frankly, I doubt that this will result in a significant improvement. Let us know your results if you decide to try it.

  If you decide to try a new router, AirPort, Apple offers a 14-day return privilege, so if one new product is not the way you want, you can return it for Exchange or refund.

• Extension of WiFi using the Virgin Super Hub and Airport Extreme

  I am trying to expand the network so that I get better WiFi in another area of the House.  I have set up a unit of the Airport Extreme (AE) and through the Airport utility, I see that it is picking up the WiFi network and get the green light.  When I click on the device in Airport Utility (AU) to check the information of the AE is indicating that it is on the WiFi network and the right connection.   None of my devices (iPadAir 2 and iPhone 5) are picking up the WiFi Signal.  However, when I click on change EI is indicating a Base Station.  So clicking on wireless and network Mode, then click on extend a wireless network by clicking on update of the unit could not leave the stand mode.   Very strange!

  Routers Apple do not work as universal repeaters... they extend ONLY other airports.

  You can't do what you want. You MUST connect the extreme by ethernet on the Super Hub... or use adapters EOP.

• Can I use Virgin Media email and gandi mail net on same Thunderbird set up?

  Having problem for Thunderbird at the second address Virgin Media email see (new) and webmail not much better. If I create a Gandi net account will both my V Media address 1 and new address Gandi be available the same Thunderbird set up?

  Regards, Phil

  I fear for you that if webmail of problems, normal email might be not the best (and could do a lot worse!) You have a particularly slow or intermittent connection?

  This isn't a bad price and it's a little less to pay for my. org.uk domain and its accounts. But then my provider is in the United Kingdom and I am in terms of name with exceptionally competent technicians they employ.

• How can ensure me that Safe Search of Virgin Media is enabled in the settings of Firefox

  My service provider to wide band in Virgin Media. They have Safe Search, which blocks all pornography, hate, Crime, Violence and self-harm and suicide websites, but it does not work when searching in Google. They say I should make sure 'Safe Search is enabled in the settings of your browser search engine' I can not find how do.

  Thank you very much

  Barry Hughes

  IMO, if it's a feature offered by your ISP - Virgin Media - I think that the controls for which would be available on a page of Virgin Media website. Or there should be some type of addon.

  -What are you talking about? Safe Web
  http://my.virginmedia.com/my-apps/websafe.html

• How can I change the settings of cookie/javascript since the last update of mozilla tools icon has disappeared and I can't access my email from Virgin Media account

  I tried to connect it to my Virgin Media email account and get the message on the activation of cookies and javascript. When I followed all of the options (which are set out in all your help pages) I can not connect on my email account. Other Web sites that use user names and passwords seems to be affected. The only problem I see is the site of Virgin Media. How can I access my email account now.

  To change the setting of cookie

  Go to the Firefox Panel its on the far right last button.
  Go to options and then go to privacy
  and make sure that it says Firefox will: remember the story

  If it still does not work, I would recommend reset firefox.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information.

  Now, should open a new tab containing your troubleshooting information.

  1. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  3. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• F4580, printer: unable to connect F4580 to wireless network after the upgrade of Virgin Media nowhub

  My printer HP F4580 was connected to my network without wire from Virgin Media Superhub. Then I upgraded to the latest Supehub2 of VM (150 MB/s) but the printer does not now connect. We have 2 Macbooks that connect ok for the SSID of 5 Ghz and a cell phone that connects ok for the SSID of 2.4 Ghz. The printer is WPS enabled and therefore the network. I tried to add the printer to the network using the two WPS push and entering the PIN for Client in the VM Supehub Wireless Manager, but neither work. When I get the F4580 to print the wireless network test report prints a WPS PIN and details for the VM in 2.4 GHz network (auth WPS - PSK, AES/TKIP encryption) sees it. The report includes the SSID for my previous network in the configuration summary. I don't seem to have another way to connect elsewhere WPS push or PIN customer WPS.

  In Manager machine virtual Supehub mode wireless 2.4 GHz network is defined as up to 144 Mbs, but it makes no difference if I put it up to 54 Mbit / s. The Security Mode is set to Auto WP, it makes no difference if I put it to WPA2-PSK (AES).  WPS is activated, and push the WPS button on the Supehub flashes when I use WP Push or enter the PIN code of the customer. In both cases, the I pressed the F4580 wireless button so that the indicator wirelss light flashes then than the VM, push the button flashes. Can anyone help?

  I solved the problem of (re-) install the printer on a Windows PC on the same network, using the CD for the printer. The installation allowed me to select the network, and set up the printer for wireless use.

• Loss of connectivity with my Virgin Media's broadband package.

  I have a Virgin Media's broadband package

  Hi Maxine Brydges,

  I suggest you follow the steps in the article mentioned below and check.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

  Let us know if that helps.