Nightmare RESOLVED!

I have no idea how or why these registry permissions are a problem, but I know that the following solved the problems and enabled Flash Player install properly for me.

I opened regedit and type ("Find") for entries that had the keys, values, or data that contain the word "flash". This property returns a large number of entries, including a lot of "aolflash". I ignored all the AOL ones, but everything else, I click with the right button on the tree item selected "Permissions" and checked the permissions for the Administrators group. A number of registry entries did not have permissions administrators 'Ful Control' and 'read '. When these permissions could not, I checked the Allow check box so that they would be allowed and clicked the button apply.

After making sure that the directors had "Full control" permissions and "Reading" for all entries in flash, I can you exit Regedit and directed the flash uninstall program once more, then a flash page, where I was prompted to install. I chose to install, he did, and then the flash player has played. SUCCESS!

Now, the warnings! Play with your registry can really screw up your computer to the point that it cannot be run again without having to reinstall everything from scratch. If you are not comfortable to backup the registry and editting it, don't MESS WITH HER! Ask someone who knows what do them to help you. I do not know what writing or the scriptures were the most important, then you are on your own, but maybe this info can help Adobe to find a solution without danger. In any case, good luck. Thanks to everyone who offered advice along the way.

I have no idea how or why these registry permissions are a problem, but I know that the following solved the problems and enabled Flash Player install properly for me.

I opened regedit and type ("Find") for entries that had the keys, values, or data that contain the word "flash". This property returns a large number of entries, including a lot of "aolflash". I ignored all the AOL ones, but everything else, I click with the right button on the tree item selected "Permissions" and checked the permissions for the Administrators group. A number of registry entries did not have permissions administrators 'Ful Control' and 'read '. When these permissions could not, I checked the Allow check box so that they would be allowed and clicked the button apply.

After making sure that the directors had "Full control" permissions and "Reading" for all entries in flash, I can you exit Regedit and directed the flash uninstall program once more, then a flash page, where I was prompted to install. I chose to install, he did, and then the flash player has played. SUCCESS!

Now, the warnings! Play with your registry can really screw up your computer to the point that it cannot be run again without having to reinstall everything from scratch. If you are not comfortable to backup the registry and editting it, don't MESS WITH HER! Ask someone who knows what do them to help you. I do not know what writing or the scriptures were the most important, then you are on your own, but maybe this info can help Adobe to find a solution without danger. In any case, good luck. Thanks to everyone who offered advice along the way.

Tags: Flash Player

Similar Questions

  • Extensions nightmare resolved

    I kept getting "installation file no is invalid will not install handler extensions." error message when you try to install DW extensions. This was despite installing from DW, double click on MXP, deleting files files cache, removing other user.dat, signature as another user, re-setup of MX and MS several times. I even downloaded the trial DW CS3 and Adobe EM 1.8 and get the same errors.
    The solution? A software conflict with the malicious software including PC tools Threatfire protection software. I have them turned off and there is no problem more in installation of extensions!
    I hope that this helps someone else and has also been posted in the Extensions Forum

    I kept getting "installation file no is invalid will not install handler extensions." error message when you try to install DW extensions. This was despite installing from DW, double click on MXP, deleting files files cache, removing other user.dat, signature as another user, re-setup of MX and MS several times. I even downloaded the trial DW CS3 and Adobe EM 1.8 and get the same errors.
    The solution? A software conflict with the malicious software including PC tools Threatfire protection software. I have them turned off and there is no problem more in installation of extensions!
    I hope that this helps someone else and has also been posted in the Extensions Forum

  • Death of the owner of the household account led to nightmare

    Hello ladies and gentlemen,

    my brother died surprisingly with 44 5 months ago. His wife and three children have a bunch of iPhones and iPads.

    It creates what we call 'account family', so it could decide which apps got his wife and children.

    OK, he's dead, nobody knows the password for his Apple ID. I called Apple Support a dozen times. It was a nightmare. No one understood me, everything that supporters want to remove its Apple-ID.

    The problem is:

    Family accounts are somehow "linked" to his Apple ID. If I would create a new ID, children would lose their scores in the various applications of game.

    After awhile, I got an e-mail address of a supporter in Dublin. I sent all the information she requested, death certificate, certificate of heredity, etc..

    She said they will disable the father Apple ID and 'Edit' the family account again, normal Apple ID that are no longer bound to the ID of their father.

    OK, done for a girl. Not possible for the widow, she has also no password for the ID Apple and Apple support questions that can be answered only by a dead person?

    Of course, the related e-mail address, credit card number, etc. also disappeared for months.

    But now for the problem:

    I changed ID icloud and iTunes & ID App to it. I rebooted the iPad device. Then I tried to update the 22 actually apps, which should be updated.

    I will be asked to enter the password of the account - now disabled - father.

    Thus, three months pass for nothing.

    Question:

    -Why is the deaths of a family account such a problem for Apple?

    -What is the solution for my problem? Is it possible to solve this problem anyway, so my nieces can upgrade their applications on their Apple device?

    Or is the only solution for this nightmare to get rid of all accounts and create new ones? (lost all partitions in the applications...)

    Thank you very much.

    Best regards

    Karl

    Usually the advice would be based on a legal conception of the end-user and the common user

    the agreements which have been concluded by these users involved or who knowingly involved...

    It's vague and General, however many times this subject comes up advice included

    the need to provide original proof of purchase (accounts, payments, AppleID,)

    products, etc.) and proof that the person who controlled all this has disappeared; and have

    the legal representative or the person with enough-proxy during succession, to

    working with someone to Apple or its affiliates and try to resolve the issue.

    Be advised to never send only copies of legal documents outside of your possession

    and to obtain legally recognized copies of those you need to share.

    Contracts and property, as well as the permissions user and AppleID are measures of protection

    Try and maintain a walled community shelter outside intrusion involuntary and/or flight of

    content and the flight of the use of these hardware and software products at issue here.

    You may be able to contact someone at Apple legal or other main contacts at Apple for help.

    http://www.Apple.com/legal/

    http://www.Apple.com/support/appleid/

    http://www.Apple.com/contact/

    If connected on the Apple websites and to visit certain pages, they show different content for you.

    https://getsupport.Apple.com/

    Contact Apple for support and service - Apple Support

    https://www.Apple.com/support/iTunes/contact/

    https://www.Apple.com/icloud/family-sharing/

    Given that used all the same sharing content, family sharing access iCloud is enabled;

    so many questions need to be addressed; This is rarely a place for complex legal solutions.

    Even the form of payment and the holder of the account of credit associated with these accounts have

    be changed and recognized, as well as all new Apple ID created for that purpose.

    Sorry to not be of great help, but since your question is not a software/hardware

    problem, but involves legal and practical principles, that may be the direction to go.

    Maybe you need to learn your rights and rules that apply in your country. as

    for the types of contractual obligations of the service and support, and how they vary.

    Good luck!

  • Monthly updates of Windows 7 turned into a nightmare experience (very slow)

    Over the last four months, try to download/install important updates for Windows 7 has become an absolute nightmare, and it seems to be getting worse.

    Previously, if I ran one of the MS Fix - It tools, the problem resolves itself, but not this month.

    When new updates are available, there is no notification, but the processor starts working at 20% capacity even if no application running.  This will go on for days.  If I choose to download Windows updates, the progress indicator shows 0 Kb Total, 0% complete for an indefinite period.

    This time, I ran "WindowsUpdateDiagnostic.diagcab" several times with reboots and it has given the following results each time:

    First of all, a separate dialog box would jump to the top with the following error message: "X error of compressed (zipped) Folders - file not found or no read permission.  OK' I don't know what it is referring to.  If I click OK, it disappears.

    After a most important treatment, the following information is displayed:

    Registration for the service is missing or corrupt (fixed)

    Windows update error 0 x 80070057 (2016-07-14-T-05_54_37P) (fixed)

    Recent updates (fixed) installation problems.

    The only thing that me mystified the Fix - It app above has also stated "Architecture: amd64", while my PC is running on a processor Intel Core i7 2600 K CPU (not overclocked).  (?)

    I ran Malwarebytes to check for bugs and have a current version of Norton Internet Security runs continuously in the background.

    It resets the screen install updates at this stage and start at the bottom left of the screen indicates that there are updates installed at the stop.  Off 10 updates, he settled on the banks of 2 or 3 instead of the entire batch, then the entire scenario repeats itself if I click on the diagcab application after restarting the computer.

    It seems to me that the Windows Update installation process is broken and Microsoft are indifferent or unable to fix the problem.

    I've read countless complaints on the web of people faced with a similar problem.

    Is this a ploy by Microsoft to force people to upgrade to Windows 10 making their digital life unbearable?

    This is unacceptable, and Microsoft need to resolve this ongoing problem!

    Hey Kayla,

    Did you change on your computer before this problem occurred? You use Windows 7 as well?

    Meanwhile, check out this article to solve your concern on error 0 x 80070057

    An update with the result.

  • Upgrade: series number nightmare ADOBE NO HELP

    I tried to upgrade to CS4 MX4

    Purchased serial number

    Downloaded the CS4 full version

    Put in the n serial

    THEN - don't request MX Series No that I put and will not accept

    It says contact customer

    RIGHT - have you tried!

    Without hope

    Going in circles - technical help shunt will return you to the customer service

    And guess what - the customer service don't answer

    I don't know if somebody got thru to ADOBE and had a sensible answer

    My advice is that if they can resolve this nightmare of activation - get another program and stay away from ADOBE

    Sorry, you have problems with the upgrade.  This is a user to user forum and Support Adobe can't hear you :-)

    I know that it is extremely frustrating and sympathize with your problem.

    Have you looked at this tech note: (right bottom)

    http://kb2.Adobe.com/CPS/152/tn_15282.html

    Not sure if it offers any help, but it's the only thing that I could find in the technical notes.  If this does not help, I'm afaid, you don't use expected on Support Adobe.

    Nadia

    Adobe® Expert community: Dreamweaver

    Unique templates CSS | Tutorials | SEO articles

    http://www.DreamweaverResources.com

    http://csstemplates.com.au/

    --------------------------------------------------

    http://Twitter.com/nadiap

  • After the awakening of the mode standby, Thunderbird crashes if the start menu of windows 10 is open RESOLVED in version 38.3.0

    If I have Thunderbird up and then I put windows in sleep mode, when I come back once again, the start menu in Windows 10 appears automatically (can someone tell me how to stop this?). If I click anywhere on the screen menu start disappears and everything works fine, but if I forget to do it and for example, double-click on an email to open it, Thunderbird and then freezes. If I close Thunderbird and re-open he, she, then it brings up the email that I had clicked on, so he must have tried to open it while it was frozen.
    This isn't a big problem, just annoying bloom. Don't know if it's a problem of Windows 10 or Thunderbird. If someone can tell me how to stop start menu from popping up automatically, it wouldn't solve the problem, but it would be at least!

    Version 38.3.0 is now available. Resolve the problem?

  • Thunderbird freezes for receipt of emails, unable to use until they are downloaded. RESOLVED itself after several updates of Windows

    Whenever I get all new email, Thunderbird freezes completely and I'm unable to use it until the emails have finished to download. It happened this last month. I have a PC, Windows 7 and not using Bitdefender. I have no antivirus software installed and Windows Defender.

    I'm not very technical and would appreciate assistance payment facilities!

    Thank you
    Helen

    Hello

    Thanks for your replies. Just back in line, and after a lot of windows updates, that the problem seems to be resolved, well that always a little slow going. I'll see what happens on the report and the weekend when I use more if the problem comes back.

  • How the sender can resolve this message may be a scam?

    How the sender can resolve this message may be a scam?

    When your question has been answered can mark you the thread as "Solved" Please?
    Thank you.

  • RESOLVED: Filing for this year does not

    RESOLVED - don't know how, don't know why.

    Hello
    I use Thunderbird 31.3.0 on win8, value my 'annual files' check-in options and keep the subfolders. By clicking on the check-in button creates the respective subfolders in the folder-2014 of archive, but it does not move the message. However, for messages from 2013, it works. So in general archive and the IMAP connection to my mailprovider seem to work. Thunderbird just hover the mails from 2014. And I can't even drag-and - drop to the folder manually.
    My account is almost full, please help

    solved

  • Why content poster that my post has been resolved when he doesn't?

    In my content / author I see this:

    But the issue is NOT resolved.

    In the forum of Yosemite, filtered for any unresolved question, I see this:

    The forums have been pretty difficult to navigate before they have been reworked. They are even more difficult to use now, and those of us with eyes > 40 years may not be happy with the extra-light melting and metadata of 50% gray.

    You as the owner of the thread being the only one that can mark the mail address you must have done it.

  • [RESOLVED by itself] Firefox Sync: unable to connect to the server for 12 hours now

    New installation of Windows 7 64 bit
    New installation of Firefox 28

    Is my sync configuration, enter the user, pass & recovery key.
    It hangs on the audit for more than five minutes.

    Then displays error: unable to connect to the server
    See the screenshots: http://i.gyazo.com/0d19d680eae937fa27ace5df59caaa5d.png

    This happened during the last 12 hours.

    The State of the system (https://services.mozilla.com/status) Says:
    "The Firefox Sync service is running normally.
    There is no known issues at this time. '

    I tried to disable the firewall and I use MS Security Essentials.

    Please advise?
    Thank you.

    This issue is resolved itself today.

  • Firefox knows several accidents since installation of Webroot AV package need any info on the crash can get to try to isolate and resolve this

    Accidents that occurred at several sites and even occurred when you connect on the browser on 3 or 4 occasions. More frequently so involved in the loading or reloading flash games. Disabled various functions in the AV, cannot be isolated from anything. Here as much information as possible about what is causing crashes then may be disclosed to the webroot for possible resolution
    Any help greatly appreciated
    Here are the last 5 IDs, have a large list, several have been submitted
    with comments about this issue

    Solution:
    Test continued the 20
    As indicated in previous entry
    crashes with all the below to note the values of Configuration FF the value 'True '.

    DOM. IPC.plugins.Enabled
    DOM. IPC.plugins.Enabled.npctrl.dll (microsoft Silverlight)
    DOM. IPC.plugins.Enabled.npqtplugin.dll (Apple Quicktime)
    DOM. IPC.plugins.Enabled.npswf32.dll (Adobe Flash)
    DOM. IPC.plugins.Enabled.nptest.dll (NPAPI Test Plugin)
    DOM. IPC.plugins.java.Enabled (Java)

    With these is set to false and WSA on, Firefox crashes occurred randomly in various
    situations in surf and play.
    Crash with WSA not disabled.

    The value of these values are all true, then no crashes the browser.

    Breakdowns:
    All the fake worms, checked once again, WSA, Firefox crashed, with WSA
    offshore, no crashes

    Started with Java and worked at bottom upwards by turning each and stable
    with WSA rekindled.
    Crashes stopped occurring when the plugin Quick time has been set to true.

    'Cultivable fix to this problem, the user: the configuration above to all true values

    (Best bet to be a problem that does not occur, with quite true I rebooted)
    during the game play hundreds of times without accident)"

    Looks like there is some kind of conflict between plugin Quick time and the
    WSA, which should be resolved by Webroot if possible.

  • 50g - unable to resolve a simple system of equations

    It's very easy to do on my Casio FX115-ES, but I can't understand how do on the 50 g for the life of me. I am trying to solve a simple system of equations, illustrated below, for a static engineering courses.

    (F1) sin (30) + (F2) sin (30) - 6 * cos (20) = 0

    (F2) cos (30) - (F1) cos (30) - 6 * sin (20) = 0

    I know it's a simple problem and I can do it by hand, but we'll soon be solve systems with 3 + unknowns. I love the RPN, so I need to be able to quickly resolve these systems on the 50g. I have read the books and searched the Internet for 30 minutes and I swear that nothing I do works. I can't add the words sin() and cos() in a matrix. Solve the paintings, num, s address, m solve... None of this works! I know it's user error, but I have no idea where to start.

    Thanks for any help you can provide!

    Bill

    The unusual notation is shake me up.  Are variables F1 and F2?  If so, we will replace by X and Y and rewrite your system in the standard format:

    Sin (30) * X + sin (30) * Y = 6 * cos (20)

    -cos (30) * X + cos (30) * Y = 6 * sin (20)

    There are many ways to solve this system on the 50g.  How I find simpler (less keystrokes) is by dividing the constant vector by the matrix of coefficients.  There are several ways to do it too, but it's my favorite.

    First of all, make sure your 50g is in approximate mode: while holding down the button to the right, press repeatedly until you see the "~" annunciator instead of "is", then release the button to the right.

    It goes without saying, you must also be in degree mode, so if the first anunciator said RAD, run DEG to change to DEG.

    Now, press the MTRW (['] left shift) to start the MatrixWriter application.

    First enter the vector of constants:

    20 COS 6 * ENTER

    20 SIN 6 * ENTER ENTER - > see [5.638... point 2.052...] on the stack.

    Now enter the matrix of coefficients:

    ENTER 30 FISHING

    ENTER 30 FISHING

    down-cursor left, cursor left, cursor

    ENTER 30 COS [+/-]

    30 COS SIMULTANEOUSLY on KEYS-> see the matrix of coefficients in the stack.

    Divide then: /--> see [4.45... 6.82...], which is [X, Y], the answer.

    If you want exact solutions (and not just the decimal approximation), do all the foregoing in exact mode (sign '=').   Don't forget to put each algebraic expression in single quotes marks.  You can use the MatrixWriter, or you can just type it directly into the battery like this:

    ['6 * COS (20)' '6 * SIN (20)'] Come in

    [["SIN (30)" "SIN (30)', ' - COS (30)" "COS (30)"]]

    /-> of simplified solutions

    A way to simplify these is:

    OBJ→ DROP EVAL (see Y on the stack)

    SWAP EVAL (see X on the stack)

    Exact solutions are 6 * cos (20) ± 2⎷3 * sin (20).

    There are many other methods to solve systems on the 50 g, each with its own entrance of syntax.  Don't forget to single quote each algebraic expression whenever you are in RPN mode.

    Hope that helps!

    -Joe-

  • How to uncheck a box 'Resolved' for an answer to a question that I submitted?

    I asked a question and not intentionally clicked on the 'Right answer' box in the email "you have received a response. However, one of the answers has now "Resolved" box checked. I want to encourage more responses and suspect you will thus limit the responses. How do I uncheck this box or remove the check mark 'solved '?

    You cannot deselect once you have checked and no one not but could have checked it

  • If the iOS 9.3 with older phones problem has been resolved?

    The iOS 9.3 update screwed to the top of my iPhone 5, but good. After downgrading to iOS 9.2.1 and spent several hours chatting with Apple Support and recover my apps, settings and some more time, I'm wary about retry iOS 9.3. My phone invites me to once again 'upgrade' to 9.3.

    Has there been a change?

    Yes, they fixed with an update last night, you should spend.

    ads-affected-by-activation-lock-issue/ http://9to5mac.com/2016/03/28/Apple-re-releases-iOS-9-3-for-Older-iPhones-and-IP

    But backup your iPhone before, just in case it is not resolved.

Maybe you are looking for

  • Scan function connects to the Windows 7 computer

    I have a LaserJet M1212nf, CE841A product number and a new Windows 7 computer. The printer works fine from the computer but the scanner is not recognized. I went to this subject through different programs, but nothing seems to work. I also tried to d

  • How ACS to communicate with DomainController in different domain controllers?

    Dear Sir Our company has 4 ACS, version 5.3, a primary school and three others are secondary. They are in the other domain controller, and I do not know which domain controller they communicate, how to check and how to configure ACS5.3 to communicate

  • Importer MXF Failed to istall

    I get irregular errors on PP recently. I'll need to document the errors the next time they appear, but it blocks PP whenever it happens, and I don't know how to find the error log. I worked on the same system for a year with Adobe CC without major pr

  • Help with layers that overlap

    HelloI'm trying to straddle these layers, and I am at a loss.You see, there's the bottom I'm moving under the third arrow, but during the first. I'm running out of ideas for the workaround because with the embossment, if I just delete this article, o

  • Question about WHERE Clause

    HelloI'm doing a conditional clause where clause displays the lines in a report.The desired control is date of two fields (CIC and announcement) must all be virgins or someone not be an 'Admin' (taken from a global variable stored on connection) for