Nilvaiu.dll missing when deploying VI

Similar Questions

• Have mutli worm of LV - 7.1 to LV10sp1 on XP PC. DAQmx - nilvaiu.dll missing when trying to open the CODE of WIN7 32 bit LV10?

  Have mutli worm of LV - 7.1 to LV10sp1 on XP PC.  DAQmx - nilvaiu.dll missing when trying to open the CODE of WIN7 32 bit LV10?

  Should which driver I?  VERSION please - DAQmx works fine in LV8.6.

  Hi Briana,

  I think I understand what you're asking, but what current DAQmx driver use you with LV 2010?  Only the 9.1.5 and above drivers are compatible with LV 2010, while many of the old drivers will still work for you in LV 8.6.  Below, I have linked an array of DAQmx driver compatibility and Labview versions.

  http://digital.NI.com/public.nsf/allkb/F4E76EC05118F72D8625773000672298

  Does that answer your question?

• Error message "MSVCR80.dll" missing when trying to open ITunes

  Original title - how to recover missing MSVCR80.dll

  When I try to open iTunes I get a message saying that missing MSVCR80.dll. I tried to reinstall iTunes several times but the same error message.

  I solved the problem people... I called Apple support 1-800-275-2273.

  Once you get through a person ask "desktop support".
  There is obviously a bug in iTunes download.   There is more then just uninstall/reinstall iTunes and they will guide you through it expert.
  It will take about an hour of your time, so be prepared.

• ntmsapi.dll missing when you use ntbackup.exe on windows 7 to recover my data from the windows xp ntbackup utility

  Hello, I was able to download ntbackup.exe on my computer, I just upgraded to windows 7 from windows xp.  However, I can't use the ntbackup.exe in windows 7.  But when I did, now I am unable to operate because the error message says missing ntmsapi.dll.  Can you guys send me the file or tell me where I can get it.

  Sincerely, Emmanuel

  Hello, I was able to download ntbackup.exe on my computer , I just upgraded to windows 7 from windows xp.  However, can not use the ntbackup.exe in windows 7.  But when I did, now I am unable to operate because the error message says missing ntmsapi.dll.  Can you guys send me the file or tell me where I can get it.

  Sincerely, Emmanuel

  Hello

  Windows 7 / 2008 R2 doesn't use NTBackup.exe to back up files. Instead, it uses SDCLT.exe (in %SystemRoot%\System32\sdclt.exe( ), which depends on the shadow copy volume service.
  
  
  If you do not want to install even when NTBackup.exe , you will need the files that you can get your Windows XP CD nt5backup.cab Cabinet or you can download them from the internet, then copy the files into a new folder (for example, copy the following files to %ProgramFiles%\NTBackup)
  • Ntbackup.exe
  • Ntmsapi.dll
  • Vssapi.dll
  • Ntbackup.chm
  • Ntbackup.hlp
  If you have an existing installation of copy of Windows XP is already installed, please copy the following copy in a new folder (for example, copy the following files to %ProgramFiles%\NTBackup)
  • %SystemRoot%\System32\Ntbackup.exe
  • %SystemRoot%\System32\Ntmsapi.dll
  • %SystemRoot%\System32\Vssapi.dll
  • %SystemRoot%\Help\Ntbackup.chm
  • %SystemRoot%\Help\Ntbackup.hlp

  NOTE: You may receive the following error when you start NTBackup.exe on Windows 7. This error can be ignored

  The backup utility cannot connect to the removable storage service. This service is required for use with tape drives and other backup devices.

  Please, get out and start the RSM service using the Services management console system function.

  
  
  Thank you
  I hope this helps :)

• the DMP is missing when deploying using DMM

  Hello

  I have a DMM and DMP on my network, for a reason that I put a '.xml' file on my DMP in the contents of the folder (\usb_1\deployment\content\\... http://tmp) and x - tac core folder too.

  the problem is when I deploy a presentation using the dmm to the DMP the xml file I store is MISSING.

  the question is why the xml file? I want this file is still there when I via DMM to the DPM Deployment Package.

  Thanks in advance for any advice you may have.

  Kind regards

  Hi Andrie,

  This folder is reserved for the deployment package, thus, all the files already present will be deleted when you perform a deployment.

  When you deploy a presentation or playlist, the DMM will push all required content for presentation, so, I'm afraid, I can't really point to attempt to download a file manually, but if you really want to do, you can download it after that deployment ended or just put in a different folder.

  Concerning

  Daniel

• Obtaining of D3D compiler 43.la dll missing when running need for speed

  Original title: D3DCOMPILER_43.dll

  I have 8 Enterprise Edition 64-bit running windows and when I try to run the need for speed, it says missing d3dcompiler_43.dll. What should I do?

  Hello

  Have you tried to install the DirectX Runtime June 2010, which is an optional update that needs a lot of games.

  Even my Lexmark printer requires... I'll include a link to the full installer...

  I'm not sure, this is a valid mechanism for the Enterprise version, but it should be 100%.

  This is a package to free extraction. It will extract after double-clicking it so be sure to note the location where extracted you\it.

  Open the folder, and then double-click DXSETUP.

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

• Error Msvcr71.dll missing when you try to install the software of the weather channel

  I tried to install the software of THE WEATHER CHANNEL after the download. Every time my an error message says "missing Msvcr71.dll" must be reinstalled to continue. My question: my computer is new (two days), how can we lack a .dll file? How can I recover the missing .dll file without having to pay for a "fix it program"? I check the internet, every program wants money to solve the problem of .dll. I need someone help, please.

  I found the Accessories folder and followed your instructions using the command prompt. The analysis said: Windows Resource Protection did not find any breach of integrity. I also tried the second part of your response, determine what files can be repaired. It said 'cannot open files ".

  Thanks for your help. I forget just install THE WEATHER CHANNEL on my desk. I have it on another computer running Windows Vista.

  Thanks again.

• Error msvcp90.dll missing when using Photoshop element 13 after installation

  Original title: Missing msvcp90.dll

  I have windows 7 Home premium. I tried to install photoshop elements 13. He says that the installation is successful. I try to start the program, and he says: ' cannot start because MSVCP90.dll is missing on your computer. " Try to re install the program to fix this problem. "I've lost track of how many times I did it. I installed the C++ 2008 service pack 1 redistributable security update because he was supposed to have the .dll file - no go.  I updated my scan of malware and virus woindows done also. How can I get this operational programme? Thank you

  Hello B.cobb,

  Thank you for your response.

  Looks like there are corruptions of important system files. Logs show a number of .dll file missing or corrupt.

  Reset the default Windows Update components.

  Also reset Windows Update components repair several DLLs and other important system files. Reset Windows update ventilation includes reset services required for updates Windows and Winsock, reset the proxy connection, if any, the queue of BITS of compensation and installing the latest Windows Update Agent.

  Run the troubleshooter automated in the link below to reset Windows update default components, if the troubleshooter does not solve the problem please follow the manual steps in the article below to reset Windows Update components manually.

  How to reset Windows update components?

  http://support.Microsoft.com/kb/971058/en-us

  After resetting correctly update Windows components check running SFC scan once more and then check with the question.

• Amtlib.dll missing when dreamweaver launches

  HY there!

  Help! Cannot open dreamweaver cs6 reason of: "amtlib.dll is missing on your computer...". "it worked well before yesterday and again I tried to transfer the file to my server there is a bug and now this message...

  uninstall, clean (use the CC cleaning tool to solve installation problems |) CC, CS3 - CS6) and reinstall.

• . Missing DLL? (nilvaiu.dll).. .when an installer of construction in 2009.

  OK, what we have here is a little grope in the dark... I have not built an executable/installer because I was working with LV8.6, so please bear with me here... before any such request, yes I find!

  Here's my process at this stage...

  I have a VI that works the way you want.  I want to make cela a stand-alone executable that I can run on a different computer to manage some controls.

  I have the runtime of LV 2009 installed on such computer.

  I then open my VI, yet once make sure it works as you wish and add a new project.

  This VI is added to the project.

  I now have the open Project Explorer and select Build specifications and select New/Application (EXE)

  On the following tabs, I get the following...

  Information... No action taken

  Source files... I select the VI and add it to the startup list screws

  Destinations... No action taken

  The source file settings... No action taken

  .. .and essentially leave everything to their default values.

  Generation hit and he built "My application", which is added under the specifications to build file.

  I took that target the folder containing the executable file included and tried to run it on my computer and it just missing the aforementioned nilvaiu.dll

  Now, I'm doing that too simple?  Missing a few steps?  I also went on the way to an installer and get the same missing dll when I run.

  I am more than willing to read and learn, but I'm just not be quality for the correct terms or in the right places.  A point in the right direction would be much appreciated guys!

  Thank you

  Chad

  

  nilvaiu.dll installs with DAQmx

• my laptop repeat myself that ststring.dll is missing when I turn it on

  my laptop keeps saying that ststring.dll is missing when I turn it on what should I please

  Hi gaynoredwards,

  1. what operating system is installed on your computer?

  2. don't you make changes on the computer before this problem?

  The ststring.dll file is associated with the secure Dell Data Backup Local software.

  You can set up your computer in a clean boot state, and check if the problem persists. It will start Windows by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information.
  Please post back and we do know.

• error message saying a .dll file is missing when I try to acess Mngr.vdmdbg task not found.

  I have uninstalled or deleted my Windows XP Pro VDMDBG.dll because I received error messages after

  I am now using the same IDE on this DIY PC like what I used to have XP Pro running. I ran an upgrade or r disc install to resign the drivers and at the same time you run some programs to uninstall some of the OLD drivers of the motherboard and temporary files, but I must have too deep because now, I have only this error message telling me that a .dll file is missing when I try to acess Mngr.vdmdbg task was not found. Reinstalling the application may fix this problem. Where can I go to download or difficulty this annoyance file or program? Thankx again! -Al

  Sounds messy.

  If you see a message like this:

  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called vdmdbg when the name of the file should really be called vdmdbg.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  PS Microsoft support engineers - "try running sfc/scannow and check if it helps" will not replace the missing vdmdbg.dll file because it is not what sfc/scannow does.  If you want to see an experiment to prove that, let me know because I have a ready-made.

• I keep invited by the missing "sliprt.dll" message when trying to install Adobe flash player

  I keep invited by the missing "sliprt.dll" message when trying to install Adobe flash player... Please help!

  Original title: sliprt.dll lack of any help?

  You can take a look at the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/how-to-install-missing-sliprtdll-file/27830979-e1cf-4c94-A074-12f6d7272065

• Cannot hear sound when it is online and when trying to install flash player then it show ATL file DLL missing, please reinstall the program

  Cannot hear sound when it is online and when trying to install flash player then it show ATL file DLL missing, please reinstall the program

  Hello

  We are pleased to hear that you were able to find a solution to the question and I thank you for the information provided. Do not hesitate to contact us, in the case where you face other problems in the future.

• LabVIEW 8.6.1: nilvaiu.dll failed DLL initialization routine

  I have just upgraded to LV 8.6.1 on Windows Vista, and all my routines DAQmx won't load with the message:

  Error loading "nilvaiu.dll.

  A dynamic link library (DLL) initialization routine failed.

  According to some old posts, I tried to add write permissions to all of the files from C:\Program NIUninstaller Instruments, but that did not help.

  I also uninstalled DAQmx - LV 8.6 support and reinstalled but that has no effect.

  I also tried to run 'regsvr32' on the DLL, but failed with a similar message.

  Everyone knows this?

  Is there a solution?

  Jason

  I encountered the same error of nilvaiu.dll after you have reinstalled the drivers LV2009SP1 and NI of DVD 2010 - DS1. While working through the error with me, Ben, AND found support this resource: ' software failure OR when PAE (physical address Extension) is enabled on the Windows operating systems '. (Document ID 54D9I6M6). This turns out be the problem of the root of both my 'nidevmon.exe' failure on boot failure and "nilvaiu.dll" on DAQmx support: recent DAQ libraries are incompatible with the enabled physical address extension.

  I am running Windows Server 2003 with 4 GB of RAM. PAE is enabled by default with Server 2003. (Look at system-> general to see if the EAP are enabled: it is just below the RAM.) As Microsoft recommends that EAP not be disabled because it ensures the safety of execution, I followed the second of the two suggested methods.

  I've edited the boot.ini file (System-> properties-> Advanced-> startup and Recovery-> Edit), added/maxmem = 4096 for the start command and restarted. Nidevmon.exe both nilvaiu.dll errors have been corrected with this change.

  System-> general reports now 3.25 GB of RAM (vs 4.00 before) so I lost a little more memory than expected. I can watch using the /burnmemory switch, that Microsoft recommends more/maxmem because maxmem "does not take into account memory hole". I'm trying /burnmemory = 16 now.

  -Rob