NMH300 and hard drives with 4 KB sectors size
Hello
Does anyone know if the NMH300 supports hard drives with 4 KB sectors or only 512 b size?
If Yes, how HDs with 4 k sectors perform?
I know: XP do not really like the HDs with sector size 4 k. W7 has no problem.
Thank you for your comments.
No, it won't work because new hard with 4 k sector disks require new chips of controller hard drive to be recognized. To be sure check just the NMH series hardware tested list .
See you soon.
Tags: Linksys Media
Similar Questions
-
Original title: startup problem
I tried cloning from my hard drive with Clonezilla, and he gave me a bad sector error. I have since run the hard drive test in bios and it passed. Anyway, clone has failed, and now the original hard drive will not boot. My dvd player won't turn when I try to load the Vista repair CD (Vista Home Premium 32 bit). Clonezilla removes the start settings for the original disc? And if so, how can I restore it? The computer starts just a black screen with a cursor at the top left. When I install the hard drive in a box and connect it to another computer, it shows the partitions and files all seem to be there.
Hi DougEisenmann,
Clonezilla is not supported by Microsoft.
If you are unable to boot from the Vista repair disk then you will need to go into the system BIOS and make sure that it is configured to boot from the DVD drive.
Check out the link:
Windows to boot from a CD or DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD
BIOS: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
See also the thread which has some troubleshooting steps for this same issue.
The above link contains third party links provided by other users.
Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer -
I bought a whole new office 27 "Mac provided with Adobe CS6. Everything worked like a charm until the 1 TB hard drive, developed a bad sector and the Apple Store reinstalled a new I had extended warranty with them. They are recycled the disc immediately (like crazy, I don't ask for this return to get the data off it.) But fortunately, I have all my data on CrashPlan. I downloaded it and it was working fine except that I downloaded it on the desk and not the original location so he had succeed. I also have an external 1.5 TB drive that I wanted to make it bootable, so I installed Mavericks 10.9.3. Then I advanced and installed on disk newly installed too.
I think that because I have a new reader that adobe thinks, I have a new computer. I bought the 27 "Mac new on Ebay and it came loaded with the software, including CS6. I have a serial number for CS6, but Adobe says that it was not valid. (I've owned CS2 and CS4 now CS6 that came preloaded on the Mac by the seller who told me that the software has been registered for the Mac?
I'll re - download the backup to the original location but this time (I still don't think that it will work with Adobe.) What can I do about it?
iMac 27 inches, end of 2012
Processor 3.2 GHz Intel Core i5
Memory 32 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 1024 MB 675MX
Software OS X 10.9.3 (13D 65) @.
You must contact Adobe Support by chat or phone when you have the serial number and activation problems.
Here is a link to a page with options to help make contact:
-
Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?
N ° you need a computer logic board which has built in Thunderbolt.
-
How to recharge my hard drive with photos that are stored in iCloud? After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".
Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.
-
Replace old hard drive with an SSD. Now some of the keys on the keyboard stopped working. Ex 'e' and 'b' keys no longer work? Any idea what could take place in the disc replacement?
Probably nothing, it's probably a fluke. Try resetting the SMC and the PRAM by iMac Intel SCM and reset the PRAM. If this does not work, try a USB keyboard to test, if it works then your original keyboard has failed and must be replaced.
-
The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive? Both units are of the same type and speed. both are records hard internal seagate w double disc in the drives
On Thu, 20 Sep 2012 14:41:30 + 0000, Stephen_403 wrote:
The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive? Both units are of the same type and speed. both are records hard internal seagate w double disc in the drives
No, at least not by us.
Open a hard drive for some reason any at all can be done in special
laboratory as parameters. Something else will destroy the disk.There are companies trying to recover data from broken disks,
and they are sometimes successful. And who knows, maybe they
sometimes use methods such as what you describe.But if you plan to use such a company, know what they
are all very expensive. It does not for most people.For the future, if you have files you want to be sure are not
lost, make sure to have in place a backup procedure on a regular basis the
external media player.Ken Blake, Microsoft MVP
-
I have two portable hard drives with music and video files and cannot get them to play
I have two portable hard drives with music and movies files can get them to play my laptop girlfriend see them, but does not play
If you copy the files on the portable hard drive will they play?
-
original title: Windows XP USB 2.0 HD backup
I have a Dell Dimension 8100 2002 with 80 GB C and 200 GB drive F drive. I want to back up files and programs to an external 500 GB external hard drive with USB 2.0 connection. How can I do this? Do I need special software to do this? I have Windows XP Home Edition. If I need additional software, what software recommend you? Now I have My Documents, my pictures, etc. on F: and programs on C: any help and suggestions would be appreciated.
Thank you, Bob Morrow
You have a few choices. You can buy a 3rd party program to backup such as Acronis True Image or Norton Ghostor you can install the program NTBackup comes with XP Home, but is not installed by default:
'How to install backup from the CD-ROM in Windows XP Home Edition'
<>http://support.Microsoft.com/kb/302894 >HTH,
JW -
I want to copy a folder to an external hard drive with the file already on it and not having to replace all the files each time. I just want to click and drag the folder to the external hard drive and have it add new files I've added in the folder on my pc over time on the external hard drive. It's annoying to have to replace alllll the files each time.
Thank you!
A simple way is to use the second copy of Centered.com software. It is reasonably priced and will do exactly what you want. MS - MVP - Elephant Boy computers - don't panic!
-
How to FORMAT my hard drive with a RECOVERY PARTITION and my system restore from. BKF files
History made as short as possible.
I inherited a gateway with XP Media Center 2004. I transferred all my old files to the new computer, and it worked fine. I did a full backup of the system (.) BKF). Later, I installed a disc for my Vivitar camera I used before with my old system and my computer crashed.
I tried everything I know to do a restore. F8, F10 and F11 during start-up and the best I could come up with was the safe MODE, but it would fail to any ENTRY.
I really feel like the hard disk must be formatted and start over. I can not access the recovery partition and no XP CD was provided.
My question is: How can I reformat the hard drive with a petition of recovery and reinstall my operating system of BKF files?
If you have a recovery partition, I suggest you post in the forums of the bridgeassistance.Another option is the following:http://tips.vlaurie.com/2006/05/recovery-console-for-those-without-an-XP-disk/"luckyone_27105" wrote in messageNews: 720fbbc2-6fb9-4fd7-9411-bdd1ec89b144...> A long history made as short as possible.>> I inherited a gateway with XP Media Center 2004. I transferred all my old> files to the new computer and it worked fine. I did a full backup of the system> (. BKF). Later, I installed a disc for my Vivitar camera I used> before with my old system and my computer crashed.>> I have tried everything I know to do a restore. F8, F10, and F11> during startup and the best I could come up with safe MODE, but it would be> not allow any INPUT.>> I really feel like the hard disk must be formatted and start over. I have> unable to access the recovery partition and no XP CD was provided.>> My question is: How can I reformat the hard drive with a petition of recovery> and reinstall my operating system of BKF files?> -
Updated encrypted hard drive with Casper and lost my Office Activations
My crypt company our hard drives with encryption of Symantec and bought Casper drive safe to copy the old hard drive to the new SSD. Everything installs without problem accept I lost my Office Activations. I am running Windows 7 and have the whole Office Suite including Visio and access. We run to Office 365. We changed support to my company and the new company doesn't seem to know how to give me activation which were loaded on my old hard drive information.
I can return to my old hard drive and store activations against anything other than the serial number of the hard disk and copy the disc but I do not see how to move the activations.
Please give me some advice. I love this new hard drive speed
You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/
You can also post in the following forum:
-
A hard drive with my Adobe leases was virus-infested and destroyed before Adobe products could be uninstalled.
I had to uninstall the 2nd install computer (laptop) in order to install on my new desk.
I would like to reinstall on my laptop but cannot because there is no way for me to uninstall from the destroyed hard drive.
Your instructions tell me to contact me about this.
Help, please!
Normally, you do not have to uninstall anything, you only need to disable. You didn't need to uninstall on the laptop, nor do you need to turn it off. If it is for the creative cloud then you should be able to install and connect on the laptop now and he is likely to ask you if you would allow all other facilities to be disconnected. You can select Yes which will erase all of the activations, and then after that the laptop is turned on you can connect on the new desktop still once more.
-
I changed from a PC to a MAC and have reformatted my external hard drive with my photos. Originally LR pointing the reader as reader J but now I can not use a letter. Y at - it anyway to solve this problem. My catalogue works fine?
In the library, go to the folders Panel, right-click on each folder of upper level and "updated to the folder location".
-
I have an old hard drive with Adobe Photoshop 7 on this subject, I connected it to my computer via usb, when I try to load it says 'Can not complete your request because of missing or invalid personalization information' I paid for this progra
It is a product obsolette, the server can activate it no more.
You can use CS2 error: "Activation Server unavailable". CS2, Acrobat 7, Audition 3 downloads & serial number are given.
Concerning
Stéphane
Maybe you are looking for
-
Cancellation of tide via itunes
How to cancel music tide? I went through all the instructions I found, but when I get to the part of subscriptions to manage in itunes, the tide is not there. However, I signed up for the free trial month and I know that his relatives to become now e
-
Hi I don't remember security questions
Hi I don't remember security questions for apple ID. and when I want to sign onther mail is reserved and change my 300 DPI question answering security question. means, I need help I can't hold my securety question and I can't change it. Help, please
-
Digital indicator rounded to the nearest whole number
I have a digital indicator for a 2D double table, and when I play with the display Format in the properties of the indicator, I can adjust to show the 3 digits of precision. However on the indicator, I find myself just get something like 1548.000. Ho
-
How to get the 'description' of a control property if the control is a part of the cluster?
Hi, dear all LV offers the possibility to work with the property 'description' of the individual control of the VI. The use of knots of property: reference VI > front propert > control [] property > Description. Unfortunately, I found a way to set or
-
Backup Exec 11 d cannot see Powervault ML6000
Hello We just bought a Powervault ML6000 (ML6020) tape library and can not see using Backup Exec 11 d. Backup Exec is installed on two backup servers: PowerEdge 1650 running Windows 2003 R2. PowerEdge 750 running Windows 2003 R2. The ml6000 library i