No. 5.1 surround sound HDMI

Similar Questions

• 4th generation Apple tv remote keeps switching HDMI 2 if I have my surround sound Samsung anynet on which uses when the samsung TV is turned on. Currently I have away the skin until I found what I want to watch.

  Current configuration is a Samsung TV with a Samsung blu - ray surround sound.  When both are on they use anynet to communicate. Now with the new apple TV 4, any click on the apple TV remote will send my TV HDMI 2 (where the entourage of blu - ray is connected). How can I stop this? The apple TV is HDMI 3. The dressing must be on HDMI 2 which is also ARC (Audio return channel)

  Try to go in the settings of TV4 of Apple and the deactivation of the ability to control your receiver and your TV. This should disable HDMI CEC which resembles its conflict with Anynet.

• Option of surround sound clothes outside with HD4870 HDMI connection after installation of SP1 Vista54

  Clothes outside with HD4870 and HDMI connection surround sound option
  I just built an HTPC and installed SP1 Vista64 and I have a problem. I have a DFI LanParty very X 58-T3H6 motherboard and a VisionTek Radeon HD 4870 video card with HD audio. I have a HDMI cable to my Sony AV receiver and all I get is Audio stereo. The subwoofer never wakes from sleep, or AV receiver indicates anything but a stereo input.

  I have the RealTek HDMI audio device installed, and he says he's working properly in Device Manager. Under properties, what is proposed is stereo speakers. Surround sound is presented as an option, but it is grayed out and not selectable. All drivers are up to date from four days and I have the on-board sound card mother disabled in the BIOS and it does not appear in the Windows Device Manager, nor are there any other audio device except the RealTek HD HDMI audio device.

  Other HDMI devices, such as my XBOX 360, a surround sound very well via the AV Sony receiver.

  VisionTek support told me to install the RealTek HDMI driver, I did, but that's all the help they were able to give me.  The problem persists.  Surround sound is gray under sound properties for this device,

  I took the HDMI cable from HDMI port on the video card and plugged on my XBOX 360 and I get surround sound, so I know that the cable and the audio/video receiver is configured correctly.

  If anyone has an extra idea about it, I know you more!

  Thank you!

  Hi flattery.

  Thank you for taking the time to post.

  Can you please post here the result of your dxdiag in the forum?

  ·         Click on the Start Orb on the Office

  ·         In the Search box , type dxdiag and press enter

  Once you're in the DirectX tool, click Save all information and save on your computer. Open the saved file (must be a text file) and copy this information and paste it into the forums here so we can see again.

  1. What is the version of the BIOS that you run on your motherboard?

  2 have you ever had this installation or surround sound from always grey work?

  Please let us know.

  Thank you

  Keith
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion 15-n267ea: how to set up 5.1 surround sound on my laptop through 3.5 mm Jack?

  Hello
  
  I was wondering if anyone of you guys/girls know how to set up surround sound 5.1 to 3.5 mm jack? I have a HP Pavilion n267ea 15 notebook with 10 64-bit Windows installed currently. My HARD drive failed last year so I had to install a new copy of windows (without the HP software) because I never made a backup.
  
  If there is a way, I would be grateful if you could let me know in a few steps. I have a surround system hooked up with an input audio jack of 3.5 mm. Any help would be appreciated.
  
  Concerning

  Hello @Androider86,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the noise and wanted to help you!

  From my understanding, to reach 5.1 output, you need the outputs 3 analog stereo, or you will have to do it via HDMI.  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• a6233. SC - HD surround sound?

  Hi, I bought the a6233.sc about 7 years ago and did not have a reason to replace it since then. I added more RAM and a bunch of external hard drives.

  Now, I'm looking for buy a new receiver surround sound capable of HDMI and HD audio and my PC has become the center of the media associated with over the years, I want to make sure that most of the things she would always keep upward. This read on sites Web HP/realtek/Nvidia I initially thought that it would be no problem: sound card is ALC888S and although there no passage in the functions of HD formats, there no record of 192 kHz/24-bit and I have a software that decodes the LPCM sound. But now I just read an article that made me doubt if the sound card is integrated into the exit HDMI of Nvidia 8600 GT.

  Another question, is my PC has more muscle to handle a Blu - Ray player?

  Any help would be much appreciated I could prioritize significantly differently if things are not as I hope.

  Peter

  I understand that you want to know about the sound card and how it works with the 8600 GT video card HDMI output.

  I am not entirely sure about the line of products from Nvidia, but that's how it works on AMD cards.  The video card has a dedicated sound chip for HDMI audio output, which is separated from the dedicated sound system map.  It has its own drivers and resources in Windows.  It is also separately listed in Device Manager in the sound category.  I think it would be the same for Nvidia products.

  Do a ctrl + f search on this FAQ blu indicates the card 8600 is capable of playing blu - ray.  According to the specifications, the system came with 32 bit Windows Vista that would make the RAM max allowed 4 GB (3, 2-3, 5 GB usable).  If there is a large RAM available, it would seem that this would be sufficient.  The system came with a 2.4 GHz quad core processor which should be wide enough for blu - ray playback.  However, none of this is a guarantee.  Each blu - ray player comes with different reading software.  I recommend to look at the system requirements of the software (which should be listed) and compare that to what your system has.  As long as you are within the reading software, it should be fine.

• No surround sound on Apple TV 4 gen?

  I recently upgraded to Apple TV fourth generation and lost my sound surround.

  My old Apple TV (3rd generation) has been connected via optical toslink to my receiver Onkyo and everything worked well. A 5.1 surround sound.

  Now, I have installed the new Apple TV 4, who unfortunately doesn't support optical output. Instead I connected the th output to my Onkyo HDMI receiver. Whenever I get sound, but only 3.1 (front left, right and Center) but no sound on my surround sound speakers. If I unplug the Apple TV and plug in my DVD player the same HDMI input on the receiver I hear great 5.1 surround. If Im guessing all the settings of the receiver is very well. It's just the apple TV that does not work.

  Why is this? Apple TV supports 5.1 sound more? Is this a known problem and how can it be solved.

  Try adjusting the audio settings Dolby on the ATV4.  Given that my receiver has no HDMI inputs, I went with an optical splitter HDMI and have 5.1.

• Not Surround sound more on Blu - ray player after upgrade by MediaSmart

  When I used the Blu - ray player in my home theater, I selected the mode "HDMI pass" to get a sound surround. I came across a few new films that would not play and after the update from HP, the player would simply freeze as soon as there is audio present. I had to go to the Task Manager to close it.

  MediaSmart works fine on the laptop, but it only freezes when I use the parameter "pass through HDMI.

  I tried mode "HDMI pcm" and who does not work either. This Denon receiver there are five channels work but I get stereo sound on front speakers left and right. This seems to indicate that the Blu - ray player is not released in 5.1 surround sound and the laptop and the Denon receiver works fine.

  Supports the HP solution was to reinstall the older driver or try a system restore. I know that a system restore won't do anything. The problem is in the new software. The new software does not work on my HDX18 when he was under Vista, it did not work when I upgraded to Windows 7 and it does not work on my new dv8.

  I tried to contact CyberLink to let them know that the upgrade is giving problems, but I think they ignore me.

  Personally, I think that HP or Cyberlink just forgot to add the drivers for a 5.1 and 7.1 surround sound.

  If anyone find a solution to this one that I wouldn't be surprised. I'm quite sure I've covered all the possibilities, but you never know.

  Any help would be appreciated.

  Thank you

  HP had me download a software called K-Lite which is a software codec repairs and replacement. After the upgrade of the software more returned to get my blu - ray movies to work, I ran K-Lite and that did the trick.

  http://www.codecguide.com/download_kl.htm

  I used the mega version, but you can probably use the standard.

  It is a software complex with many choices and I changed it to accept a sound audio surround and DTS 7.1. There were several boxes prompting me to remove the broken codec which continued for some time and when it was all thanks to I was surprised that it worked.

  Meanwhile CyberLink itself actually got back to me and I was given some temporary free software provide I run their diagnostic tool for them on my dv8 for helping them understand my problem. It is still pending.

• Surround Sound Device do not appear in Windows

  Hello

  I have my PC running via HDMI to a Denon AV amp, out for my LG Plasma and through the eye of the TV to my 5.1 system stereo. The problem is that Windows sees only the TV speakers, so I can't set up the skin in Windows. I can't use the PC output optical directly into the stereo, because she is disabled with HDMI output. Is it possible to select optical for audio in Windows when you use HDMI for video.

  I was hoping that the AV amp would be a solution, but it detects that it is connected directly on, so when I hit the "Speaker" button, it proudly displays 'TV - Stereo' and also will not output sound other than through the HDMI - in this case.

  I can't just plug the stereo speakers to the amp AV or because they have taken non-standard and the rear speakers are wireless.

  If anyone has any suggestions, they would be greatly appreciated

  See you soon.

  Hi André,.

  Sorry for the late reply.

  I suggest you follow the advice given by Nathan Pachmayr July 20, 2013 from the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-Media-Player-and-51-surround-sound/1ddd1018-39cc-4608-aa83-b935af226741

  You can also consult the advice given by Afzal Taher April 21, 2010 from the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-surround-sound-problem-51-surround-sound/74a2327f-8b71-4C6C-b359-50174c646be9

  Hope this information helps, get back to us if you need further assistance.

• Can't get surround sound in Media Center

  I have a computer set up in my living room which is mainly used for watching TV in Windows Media Center on Windows x 64 8. I've noticed for a while that it seemed that sound surround did not work and I was only get stereo sound of the by the front speakers. I run sound via HDMI to my computer in my surround receiver. The output is a motherboard Intel DH77EB using graphics Intel HD 4000.

  When I go into the Windows taskbar and open the playback devices, I configured the audio HDMI 5.1 surround and the sound is output to all speakers. Before, when I would try to run the speaker via Media Center Setup, it would skip the screen where you can play a sound test and go directly to the screen resolution of the problems, as if I chose that I could not hear sound from all speakers. After crossing the speaker setup of the Windows again last night, I could finally access the test page for the configuration of your speakers in Media Center. This time, the small circle 'busy' just spun for a while, and then he asked if I heard the sound of all speakers. He never played any sound. I thought he would return to the previous settings, but when I tried to play TV, he played with no audio and then pops up an error on the codecs are not properly installed.

  The only way I could get Media Center to start playing live and recorded TV is again to return the Windows sound properties and reconfigure my HDMI out be only stereo. I have temporarily lost my digital optical audio cables, but I will try those next. I hope that this will work because it will rely on different audio drivers for my computer (Realtek). I didn't have to run an extra audio cable when HDMI should work for all.

  The additional troubleshooting steps I took were completely uninstall and reinstall all the graphics and audio drivers with more later from the Intel Web site. I would try a refresh of Windows installation because I think that it worked when my computer is first set up (before some problems with my SSD). The only problem with that is that I have many records of CableCard that I would lose to join because of copy protection.

  So there is a work around for this problem, which is still not great, but will fix the problem to some extent (not require to keep switching the mode stereo surround for different applications). If you have your default playback device (mine is a Nvidia video card using the HDMI output) output configured for 5.1 surround sound it is a way that you can get Media Center working properly. If you start Windows Media Center by double clicking on a video recorded (record TV) in the recorded TV file default value it will launch Windows Media Center for the video and start playing without the two second loop audio and immanent freeze and screen "video playback error". Then, you can navigate to Live TV and it will continue to function properly. This seems to be the only medium that you can leave your speakers configured to 5.1 surround output and still use Media Center.

• Connection to (Qosmio G20) Surround sound

  I'm trying to connect my Qosmio G20 to my sysytem via an amp external surround sound.

  As far as I know I have everything connected correctly, but I'm only obtaining from my front left speakers and rear no where elsewhere.

  I checked the speakers and all the settings I can think on the laptop, is there something that I don't have to send the signal to all the speakers?

  Any help is greatly appreciated.

  Thank you very much

  Hello

  Check it please this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3665&messageID=12229#12229 topic. I believe that display Quad will be useful for you.

  Good luck!

• Just not upgraded for Windows 10, 7.1 Surround Sound no more functions

  I use a Logitech G633 helmet, which is compatible with a 7.1 surround sound. Before moving to Windows 10, one worked perfectly well with Skype and my sound quality surround sound was crystal clear. After the upgrade to Windows 10, Skype does not use surround sound and instead, I'm treated with bad stereo audio.

  Everything else on my computer always uses one surround sound, except Skype. This problem is only with Skype.

  I tried to reinstall the Skype and Logitech software, with no result. I am at a loss for what to do and if I can't find a solution I'll down(up?) level to Windows 7.

  I already tried to install a version of LGS that dates back all the way to March 2015, and it did not fix the problem. I was already using the latest software version when I was running Windows 7 and Skype worked fine with one surround sound with Win7.

• Analog sound HDMI help? (w2408h and Pavilion m9177c)

  Has anyone found a way to use the HP w2408h HDMI connection and the m9177 flag while using the analog connector (green) for the sound?  My problem is the following: if I connect the monitor using the HDMI cable, I get the big picture but bad sound from the built-in speakers.  If I connect the monitor using the VGA cable, I get distorted but, video in this regard, I can use the analog green connector and my subwoofer (to get much better sound).  that I have not found how I can use the computer's output using the analog sound HDMI connection; it seems using HDMI turns off the Green connector output...

  I bought a male-DVI female to HDMI adapter today and finally having my w2408h one good picture and good sound of good old computer speakers Altec 2.1 I still hanging around.  Adapter is $20 + tax.

• Mac Mini, 2016, 5.1not Surround sound work

  Hello

  I'm new to mac. I have so far had to import my library ituns with sides of my pc and I have problems major can´t import a CD so I'm not in love with the new system. Also I just found out that the mac does not work with 5.1 all the time! I have configured as such, and when I do a test the rear speakers work. However, when I look at something or have music on there is no sound from the rear speaker I checked on my blueray and they work so no problem there.

  Any ideas.

  This CD you are trying to import into iTunes?

  And why you can not import?

  Computer music are for most stereo and not 5.1 surround sound.

• Audio Usb Hub 3 x Usb 1 x Lan on 5.1 Surround Sound card?

  Hello

  I want to buy a Usb Audio Usb Hub 3 1 x Lan onboard x 5.1 Surround sound external device, but my question is: can I use 2 outputs to give a different signal?

  I use Traktor DJ Studio and I want to use an output for the player on the left and an output for the player from right, is - it possible to do this whit a Usb Audio Usb Hub 3 1 x Lan onboard x 5.1 Surround sound divece?

  Hello

  Is there no possibility to check how it works before buy you? You will be very happy if someone here has already tested. ;)

• IPAD playing on my Surround sound system

  Hello, I currently my IPAD 4 (Retina Display with lightning connector) connected to my audio system surround sound home. I ran a wire to an analog output from the transformer to the IPAD headphones Jack and it seems to play fine through my speakers. I also have the IPAD sitting on a Belkin dock with no entry to the outer (this is why I use the headphone jack). I have to manually change the titles on Itunes.

  As I continue to enjoy the music through my system, I'd do it to make it more effective. I wish I could change the track using a remote control (my universal remote does not recognize the IPAD). I tried a few external docks which have their own speakers (as well as a Bose Sound Dock Altec); an auxiliary input and a remote control and they do not seem to work with my system and I don't know why. Music will not play when I connect the phone directly on the entry on these docks - nor the remote that accompanies these docks work.

  Can anyone recommend a solution for me or a product "universal docking station" my IPAD can sit with an auxiliary input and a remote that works with my surround sound system? Or I'm just something wrong?

  Your ideas and the entrance is appreciated by words.

  Thank you.

  Take a look at this.

  http://www.Amazon.com/Satechi-mediaremote-Bluetooth-multi-media-control/DP/B0082 4948U/ref = sr_1_1? ie = UTF8 & qid = 1391729056 &...