No access to sharepoint after update for FF30 on Mac

Similar Questions

• After update for first Pro CC 2015.3 I can not move the values in the effect controls panel

  Hello!

  After update for Premiere Pro 2015.3 of CC, I can't change the value of the property in the effect controls panel by dragging left or right when you move the pointer over the underlined value. The two small arrows appear, but nothing happens when I drag them and it is so annoying. I tried now pressed the SHIFT key and several others trying to drag, but it makes no difference. I restarted the program and my computer but still no difference. All the patches?

  Thank you!

  

  Hello Ann,.

  I found the problem, it's my wacomtablet. When I use the magic mouse, it works great! So, I guess I should update the wacomdriver, perhaps. If your response gave me the idea to check for this. Thank you!

• HI, Siri would not speak in Italian Luca voice after update for Sierra

  HI, why Siri not talk in Italian Luca voice after update to Sierra?

  Open  (Apple menu) > System Preferences > accessibility > speech.

  Next to the system voice menu, select Customize...

  Scroll down to Italian, and then select Luca, and then click OK.

  It will take a few moments to download the new voice.

• TM taped preparation backup after update for Sierra

  My MacBook Pro (retina, 15 inch, mid-2015) is incapable of me past the stage of "prepare the backup...". "after the update to Mac OS Sierra after 3 days. Other posts on this topic are pointing the finger at Sophos. I have disabled the software, and the system is still not able to go beyond the stage "preparation".

  I was able to save on a USB - although it took much longer that usual (I have two backup methods).

  Then, I removed the network location of the TM preferences and tried to restore again. However, the system fails in the final step of adding the network drive in the preferences. So I am only left with the ability to backup to a disk physically connected only. This is very bad and I am disappointed that Apple doesn't have a case KB already open on this.

  Problems after update to MacOS Sierra:

  1 TM fails backup backups existing network regardless (of Sophos or otherwise).

  2 TM fails to create a new backup of network location

  3 TM works with a physical backup drive connected locally.

  It has been several days after the release of MacOS Sierra: I'm waiting for Apple even recognize a situation which is detrimental to the users.

  http://pondini.org/TM/D1.html

• Satellite L775: No download 'BlueRay Player' after update for Windows 8

  Hello

  Please help me...

  After upgrade from win 7 to win 8 it is not possible for playback of bluray on my Satellite L775.
  Where can I download the software for bluray playback?

  Under the following link, it says that Toshiba offers to install the TOSHIBA Blu - Ray player (last third section grey highlight).
  http://www.Toshiba.EU/innovation/generic/Windows8-upgrade-stepbystep/

  I'm looking for the web now for several hours, but could not find this software...

  Thank you.
  Carine

  Hello

  I read in the forum that Toshiba 'BlueRay Player' is a software under license and, therefore, it of not possible to download this software from Toshiba UE driver page.

  If you want to install and use the "Blu - Ray Player" Toshiba after updated Win 8, you must contact the center of Toshiba Support Officer (hotline) and ask these software download.

  There is also another option to play the Blu - ray disc. You could use a tool of 3rd pieces called VLC player (free) that allows you to stream movies.

• Portege M700: Cannot use the fingerprint reader after update for Firefox 3

  Hey

  I have a Toshiba Portege M700 Tablet and with the truesuite software on a fingerprint reader and password Bank plugin.

  It's all working fine and dandy with firefox 2.
  Then last night I went and updated for firefox 3 and now I can't log in to Web sites with the fingerprint reader.

  No error messages, nothing. I can say that the truesuite or Bank password software is not detecting firefox 3. I've updated to the latest version that I could find, 2.0.2.0.

  I found this thread by telling me the process of update of firefox it breaks and I should completely uninstall and reinstall firefox, which I did.
  That didn't fix it.

  Then I completely uninstalled and reinstalled truesuite. That did not help either.
  Its still broken.

  Anyone know a workaround or a way to fix this, or should I wait and see if there is an updated version of the password database? (I find it unlikely because this isn't really a standard program)

  Hello

  I think that the new Firefox version is not fully tested and possibly it s not completely compatible with the 3rd party applications.
  I remember the same problems with older versions of firefox. Finally, it has been resolved.

  But why you don t use internet explore? As far as I know the fingerprint works without a problem

  In any case if you want to continue to use the browser firefox 3 so I think that the only solution is to wait for an update.

  Concerning

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• I can't access yahoo mail after updating to firefox on my mac today

  I've updated Firefox today... big mistake. How is it that I can't access yahoo mail now? It says "banned Cycle. Description: Could not process your request for the document, because that would create a cycle of HTTP proxy. Please check the URL and your browser proxy settings. "

  Help!

  Another potential problem is using an old bookmark or home page address. Yahoo pass users to its latest servers, generally, you are redirected, but there have been many failures in the referral process, so try to access Yahoo mail through your homepage there or the generic redirection, such as:

  • https://www.Yahoo.com/
  • https://my.Yahoo.com/
  • https://att.Yahoo.com/
  • http://mail.Yahoo.com/

• Because the update for FF30 always get TypeError: XMLHttpRequest constructor requires 'nine', before no problem. What has changed?

  Since the update this morning to FF30, I get the errormessage of the js

  TypeError: XMLHttpRequest constructor requires 'nine ';

  Code:

  function ajaxManager() {}
  the var request;
  var version = new Array('MSXML2.) XMLHTTP.7.0 ',' MSXML2. XMLHTTP.6.0 ',' MSXML2. XMLHTTP.5.0 ',' MSXML2. XMLHTTP.4.0 ',' MSXML2. XMLHTTP.3.0 ',' MSXML2. XMLHTTP ',' Microsoft.XMLHTTP');
  {if (document.getElementById)}
  If (Window. {XMLHttpRequest())}
  request = new XMLHttpRequest();
  }
  If (Window. ActiveXObject) {}
  for (var I = 0; I < versions.length; i ++) < = "" activexobject (versions [i]); " "=" "catch (exception) =" "p =" "request ="new";" "=" "return =" "try {=" "{=" ' "} =" "(> < / versions.length; i ++) >"}

  I hope someone knows what has changed or what I missed.

  Now found a job by myself:

  "if (window. XMLHttpRequest()) {'}

  changed to

  "if (window. XMLHttpRequest) {'}

  Seems the old way I used now no longer works

• Opening Word documents after update for macbook pro

  After agreeing to he more recent macbook pro update, all old and new word documents are open in a tiny window, I can't expand. I tried clicking on the corner and dragging - no luck. This mac told me that I am OS X Yosemite 10.10.5, Macbook bought 2010

  You didn't say what version of Microsoft Word, you use but can help the following: ck-small-and-wont-expand/bfd3fcd7-97bf-4e3d-998d-b5476bf2e83b?auth=1 http://answers.microsoft.com/en-us/mac/forum/macoffice2008-macword/word-view-stu

  If this does not help, you can ask a question in the Microsoft Office for Mac forum: http://answers.microsoft.com/en-us/mac

• After update for HP UPD PCL 5 on the network drivers, local printers now very slow printing

  I've recently updated the HP Universal Print Driver PCL 5 on my Windows 2008 R2 file and print server.  All printers on network HP 5 now show the new driver of the UPD PCL 5, and 5 all seems to work fine from all clients on the attached network.

  However, as soon as I had updated the drivers from server, anyone with a printer connected locally HP began to test response times very slow when trying to print jobs to their local printer or even bring up the properties of the local printer.  I think that it is because local printers also use the HP UPD PCL5 driver, and something "broke" when I updated the driver on the server.   If the local printer is set as default, trying to make it appear a Properties dialog box takes several seconds (before it was instant), and clicking PRINT in any application results in a noticeable delay for the print dialog box to appear, followed by another notable delay (as in 10-20 seconds) before work is treated and control the application returned ot the user.  The printer takes then to another a few seconds to process work.  Essentially print jobs local just went from 5 seconds to 30 seconds or more for each task to start to print more.  This is unacceptable.

  I tried to remove all printers on network among the PC client, and then deleting the local printer as well.  I restarted, then used the install.exe HP UPD PCL 5 to start the installation on the local computer, choosing to do an installation of USB.  I turned on the printer local return and it has been recognized and loaded the new HP UPD PCL5 driver, but the problem persists.

  So after messing around with this more yesterday I think I narrowed down it to a port number.  It seems that when computers with local printers connected downloaded the new UPD PCL 5 form the network (updated their drivers for network printer), he reconfigured the USB port for each printer connected locally.  The USB port on the local printer will now appear as "DOT4 generic IEEE 1284.4 support printing", while before I'm pretty sure he showed as "DOT4 HP Laserjet one."   This white paper (which is unfortunately for Windows XP) appears to support the hypothesis that the port has changed and that the generic port is much slower (this is what we see now with local printers).  White paper on the issue of generic DOT4 port

  I tried to delete all printers that use the UPD from a local system and then using the install.exe form the UPD package to install the local printer as a USB printer (disconnection of the latter before installation and then in reconnecting it when you are prompted by Setup), still the same generic port is re-created.  How can I change the generic port to a specific port HP driver for printers normally respond again?

  Furthermore, I opened a ticket with the help of HP on the issue Monday afternoon, it is now Wednesday morning and the only response I received was a request to make sure that my cables were not more than 6' long.  Seriously HP support?

  My best guess is that you do not use the name of specific driver to the version on the print server.   Driver version-specific name will look like "HP Universal printing PCL6 (v5.9.0).   Non-specific to the version name will look like "HP Universal PCL6 print.

  When you work with print servers, it is recommended to use the name of the version-specifc driver.   I think what happened here are that the driver has been updated on the server, and this update was then pushed to clients through point and print because the pilots names.

  You have indicated that you are using the PCL5 driver.   In a general office print PCL6 offers the best combination of performance and print quality.   I recommend you go to PCL6 immediately, unless your devices or custom applications/solutions are not compatible with PCL6.  (This is very rare)

  If it were my system, here's what I'd do.

  1. Download UPD PCL6 5.9.0 and PARK of www.hp.com/go/upd
  2. Install the UPD PCL6 5.9.0 on my print server using the name specific to the version - create a temporary queue.
  3. Run AutoUpgradeUPD.exe from the PARK to remove queues existing impression on my print server and re-create them with the PCL6 driver.   (See http://youtu.be/mYCVx1RBp9w for more information on this utility)
  4. Remove the temporary queue
  5. On my clients, I would remove the existing printer USB connections.
  6. Run the UPD PCL6 5.9.0 installer and select the USB - Plug and Play mode and make sure that both check boxes are enabled.
  7. Re-connect local printers.

  Something else I could try to implement PRNCON of the PARK on each client.    It will be delete and re-create the connections to printer to the print server.    This can be run without command-line switches, but I like to use the '-2000 w' command to force a second 2 the delay between the removal of the printer connection and recreate.

  In a last time, I'll make sure to remove any old/unused drivers from the print server.

• Error Code HDL with CRio RFP generation after update for LabView 2012

  Hello everyone,

  I use a CRio DP Comsoft master/slave module for my communication with a PLC system. The application worked perfectly under LabView 2011. After the update to LabView2012, I got an error message that the HDL Code generation failed. After that I've updated also the Software NI Profibus CRio in Version 1.3, but this n ' t´t solve the problem. The next step was to use the example of project code "CS_cRIO-PB_DP-MasterExample" which was delivered with the new NI CRio Profibus software. Even with this code example, the problem still exists. For detailed information on the configuration and the error message please refer to the screenshot. Any help or idea would be appreciated.

  Jürgen

  Hi Jürgen,

  I looked inside and could reproduce this error. Somehow the compiler with LV 2012 has problems with the coded 8.5.1 Subvi LV. Please use the attached VI and copy it to the following location. (\\Program Files\National Instruments\LabVIEW 2012\vi.lib\addons\Comsoft.lib\cRIO PB)

  Before do you it please close your LabVIEW.

  Then try to compile again.

  Let me know if it still does not. We are currently working on a new installer that will correct this problem.

  DirkW

• Windows Update cannot find driver for iPod Nano after update for Wndows 7

  After upgrading to Windows 7 (64 bit) of Vista, I plugged my iPod Nano (2nd gen.) into the USB port with iTunes running. Error message told me it couldn't find drivers (in Windows Update I guess) for her and was reported as a storage device USB not recognized in Device Manager. This happened after that I uninstalled and reinstalled iTunes 9.0.2 (latest version 64 bit) as well. I also tried to install the driver manually from a directory Apple driver on my laptop, but it does not work either.

  Have seen a lot of similar problems with the iPod on the Internet forums, but no solid solutions of Microsoft or Apple. Does anyone know of a solution. I guess that all the problems reported on the Internet (there are thousands) Microsoft or Apple are working on a solution, I just haven't heard about yet...

  Coolmishu, thanks for the reply.

  Before to try what you suggested, that I tried to plug the iPod once more. I think that people of Windows Update must have solved this particular problem. When I plugged it in (for the umpteenth time), this time Windows Update went on the web and found an updated driver!

  Thanks again.

• BlackBerry 10 can't come down after update for Blackberry OS10.3.2.516

  HI guys, I had this problem, an OS10.3.2.516 for BlackBerry z30 leak was published on crackberry in the form of an auto-loader, I ran the autoloader and everything has been done perfectly as usual and my z30 was last updated, normally with the new OS. After a few days, I noticed that the operating system really is nothing new, even applications that use to work on OS10.3.1 no longer worked and it seemed chow much life dough very quickly, so I decided of the downgraded back to the version of the OS that I used before (OS10.3.1)... However when I ran the automatic charger for OS10.3.1 it starts and connect you to the device and after a second it offline and disappeared from the screen of the automatic charger, I tried several times and same result, I even tried other past Autoloaders I know that work and still the same result, I even tried to use knowyou to load the OS core and radio files (unchecked only install newer versions) and everything installs correctly , but after restarting phone that it is still the same OS20.3.2... I can't get this version of the OS on my z30... I don't know if the OS has blocked something on the device or what but it's really a drawback... the funny thing is that when I ran the same autoloader (OS10.3.2.516) I used to update my z30 do unplug the ADF, it runs the full update and did everything as usual , it's the only autoloader that seems to do the right thing... so please help guys I really want to take off from this version of the OS... I don't know what else to do.

  The quick answer is: you can't downgrade, courtesy of BlackBerry Protect: http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=3CD5457BEB8F889A20CBC5FB608C6475?...

• I can't go to my bookmarks after update for Sierra

  I have a MacBook Pro. I just updated this week to Sierra with no problems, but now when I click on multiple points in the upper left corner to reveal my favorites and my playlist only, it displays the top sites page and does not open my favorites and reading list, as it used to.

  Can someone tell me how to access my bookmarks and playlist in the Sierra? I'm sure it's something in the settings or something escapes me. My Bookmark Bar is the top of the page, yet. I can't find my bookmarks and reading list.

  Thank you

  I thought about it, I had to go to Favorites on top and tell Safari to display in the Sidebar again.