No access to systems on a network - error "the name of the provider specified network is Invalid"

Hello!

I can't use the network to locate files on a computer, and it drives me crazy to understand. Heck, he can't even locate yourself.

Here is what comes up when I try to do.

All computers, I clicked on do not work and they are all Windows 7 except for my laptop which is 8.1. Any fix?

Thank you
Christian

Original title: the specified network provider name is Invalid

Advertisement

Hi Christian,

I would like to ask you:

  • What operating system is installed on the system you are trying to access?
  • You have enabled sharing on the computer that you are trying access?

I suggest you to change the settings on the computer that you are trying to access the network and enable sharing on this computer. This error appears when the computer or the computer is connected to the network but the sharing is not enabled.

Reference:

Networking of computers running different versions of Windows

If you are running Windows 8 or 8.1 of Windows on another computer, see:

Search for computers, devices and content on your network

Let us know the results once you have enabled sharing on the other computer. I hope this helps. We will be happy to help you further.

Tags: Windows

Similar Questions

  • Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

    original title: error 0xC0AA02FF

    I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

    "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

    Hello

    What method did you follow to create the system repair disc?

    I suggest you to create the system with different USB repair disc and check if it helps.

    Means all try the methods and check them off below if it helps.

    Method 1:

    Try to put the computer in a clean boot state, and then check if it helps.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

    http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

    Note: You may lose a small amount of data while performing the check disk.

    I also inform you that the data on the USB key will be lost. You should take a backup.

    You can also check with the reference article below:

    http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  • Could not deploy blueprint: error the applicant unit. INTERNAL EXCEPTION: Nullable object must have a value.

    vRA 6.2.1 - 2543390

    Trying to deploy any plan of action in a tenant I get the following error as the author of the request:

    "A server error has occurred error the applicant unit. Nullable object must have a value. »

    Research in the newspaper the observer, I get:

    "Asking the device error. INTERNAL EXCEPTION: Exception was thrown by the target of a call. INTERNAL EXCEPTION: Error requesting device. INTERNAL EXCEPTION: Nullable object must have a value. »

    NullableObject01.PNG

    The journal of C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Web\Logs\Repository on the server of IaaS, I see the request for plan of action and the following stack trace:

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Path]: Thread-Id: 25 - MachineRequest:? XML version = "1.0" encoding = "utf-16"? >

    " < = MachineRequest container ' http://www.w3.org/2001/XMLSchema "" xmlns: xsi = " " http://www.w3.org/2001/XMLSchema-instance ">

    < TemplateId > 2e2cc4cb-c867-4290-8419-77489755d0c0 < / TemplateId >

    f4ac2e16-8b0a-47ea-94BB-455d0155f44b < GroupId > < / GroupId >

    < RequestingUser > [email protected] < / RequestingUser >

    [email protected] < owner > < / owner >

    < reason > This is the reason why < / reason >

    Properties of <>

    < NameValue >

    < IsEncrypted > false < / IsEncrypted >

    < IsHidden > false < / IsHidden >

    < IsRuntime > false < / IsRuntime >

    < name > __Notes < / name >

    Tests of < value > < / value >

    < / NameValue >

    < NameValue >

    < IsEncrypted > false < / IsEncrypted >

    < IsHidden > false < / IsHidden >

    < IsRuntime > false < / IsRuntime >

    < name > provisioningGroupId < / name >

    < value > f4ac2e16-8b0a-47ea-94bb-455d0155f44b < / value >

    < / NameValue >

    < NameValue >

    < IsEncrypted > false < / IsEncrypted >

    < IsHidden > false < / IsHidden >

    < IsRuntime > false < / IsRuntime >

    < name > VirtualMachine.LeaseDays < / name >

    < value > 100 < / value >

    < / NameValue >

    < NameValue >

    < IsEncrypted > false < / IsEncrypted >

    < IsHidden > false < / IsHidden >

    < IsRuntime > false < / IsRuntime >

    < name > blueprintId < / name >

    < value > 2e2cc4cb-c867-4290-8419-77489755d0c0 < / value >

    < / NameValue >

    < NameValue >

    < IsEncrypted > false < / IsEncrypted >

    < IsHidden > false < / IsHidden >

    < IsRuntime > false < / IsRuntime >

    < name > VirtualMachine.CPU.Count < / name >

    < value > 1 < / value >

    < / NameValue >

    < NameValue >

    < IsEncrypted > false < / IsEncrypted >

    < IsHidden > false < / IsHidden >

    < IsRuntime > false < / IsRuntime >

    < name > VirtualMachine.Disk0.Size < / name >

    < value > 16 < / value >

    < / NameValue >

    < NameValue >

    < IsEncrypted > false < / IsEncrypted >

    < IsHidden > false < / IsHidden >

    < IsRuntime > true < / IsRuntime >

    < name > Custom.Domain < / name >

    < value > child.vrademo.local < / value >

    < / NameValue >

    < NameValue >

    < IsEncrypted > false < / IsEncrypted >

    < IsHidden > false < / IsHidden >

    < IsRuntime > false < / IsRuntime >

    < name > VirtualMachine.Memory.Size < / name >

    < value > 2048 < / value >

    < / NameValue >

    < NameValue >

    < IsEncrypted > false < / IsEncrypted >

    < IsHidden > false < / IsHidden >

    < IsRuntime > false < / IsRuntime >

    < name > VirtualMachine.Disk0.IsClone < / name >

    < value > true < / value >

    < / NameValue >

    < NameValue >

    < IsEncrypted > false < / IsEncrypted >

    < IsHidden > false < / IsHidden >

    < IsRuntime > false < / IsRuntime >

    < name > __api.request.id < / name >

    < value > 2116a8fc-cf07-4827-8841-70d2e8495b1a < / value >

    < / NameValue >

    < / properties >

    < / MachineRequest >

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Path]: Thread-Id: 25 - AllocateMachineRequest: 25da3edf-7dfe-4582-ac6e-49464775d41a: started during initialization AllocateMachineRequest

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Path]: Thread-Id: 25 - AllocateMachineRequest: 25da3edf-7dfe-4582-ac6e-49464775d41a: completed initialization of AllocateMachineRequest

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Path]: Thread-Id: 25 - AllocateReservationService: 25da3edf-7dfe-4582-ac6e-49464775d41a: started GetAvailableReservations

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Path]: Thread-Id: 25 - AllocateReservationService: 25da3edf-7dfe-4582-ac6e-49464775d41a: completed GetAvailableReservations

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Path]: Thread-Id: 25 - AllocateReservationService: 25da3edf-7dfe-4582-ac6e-49464775d41a: implementation of available reserves 1

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Path]: Thread-Id: 25 - AllocateReservationService: 25da3edf-7dfe-4582-ac6e-49464775d41a: finished loading 1 Reservations available

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Path]: Thread-Id: 25 - AllocateReservationRequest: e78ecf77-025c-4cea-a322-fdfd1f5c4b21: started during initialization AllocateReservationRequest

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Path]: Thread-Id: 25 - AllocateReservationRequest: e78ecf77-025c-4cea-a322-fdfd1f5c4b21: completed initialization of AllocateReservationRequest

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Debug]: Thread-Id: 25 - began to remove virtual machine record for: [any]

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Debug]: Thread-Id: 25 - finished deleting the virtual machine record for: [any]

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Error]: Thread-Id: 25 - did not request. Inner exception: Nullable object must have a value.

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Error]: Thread-Id: 25 - [email protected]

    System.InvalidOperationException: Nullable object must have a value.

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateStorageReservations (AllocateMachineRequest request, AllocateReservationRequest currentReservation, Boolean requireExactPolicy)

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateAvailableReservations (machineRequests from list 1, list 1 availableReservations, StringBuilder infoErrorMsg, Boolean requireExactPolicy)

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateStorageReservations (availableReservations from list 1, list 1 queries)

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateReservationByType (AllocateMachineRequest request)

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateReservations (AllocateRequest request)

    to DynamicOps.ManagementModel.Services.ProvisionMachineService. <>c__DisplayClasse. < AllocateMachine > b__c()

    DynamicOps.Common.RetryTransactionException.RetryIfNecessary (use)

    DynamicOps.ManagementModel.Services.ProvisionMachineService.AllocateMachine (model VirtualMachineTemplate, ProvisioningGroup group, owner of the channel, properties of list 1, isComponent Boolean, applyExpiresOverride Boolean, Nullable Nullable networkScopeId, VirtualMachine masterMachine 1, expiresOverride 1)

    DynamicOps.ManagementModel.Services.ProvisionMachineService.SubmitMachineRequestByType (model VirtualMachineTemplate, ProvisioningGroup group, owner of the chain, the list 1, list 1 originalRuntimeProperties properties)

    at DynamicOps.ManagementModel.Services.ProvisionMachineService.SubmitMachineRequest (MachineRequest request)

    [UTC:2015 - 06-03 11:38:39 local: 2015-06-03 12:38] [Error]: Thread-Id: 25 - System.Data.Services.DataServiceException: error the applicant unit. -> System.Reflection.TargetInvocationException: Exception has been thrown by the target of a call. -> System.Data.Services.DataServiceException: error the applicant unit. ---> System.InvalidOperationException: Nullable object must have a value.

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateStorageReservations (AllocateMachineRequest request, AllocateReservationRequest currentReservation, Boolean requireExactPolicy)

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateAvailableReservations (machineRequests from list 1, list 1 availableReservations, StringBuilder infoErrorMsg, Boolean requireExactPolicy)

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateStorageReservations (availableReservations from list 1, list 1 queries)

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateReservationByType (AllocateMachineRequest request)

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateReservations (AllocateRequest request)

    to DynamicOps.ManagementModel.Services.ProvisionMachineService. <>c__DisplayClasse. < AllocateMachine > b__c()

    DynamicOps.Common.RetryTransactionException.RetryIfNecessary (use)

    DynamicOps.ManagementModel.Services.ProvisionMachineService.AllocateMachine (model VirtualMachineTemplate, ProvisioningGroup group, owner of the channel, properties of list 1, isComponent Boolean, applyExpiresOverride Boolean, Nullable Nullable networkScopeId, VirtualMachine masterMachine 1, expiresOverride 1)

    DynamicOps.ManagementModel.Services.ProvisionMachineService.SubmitMachineRequestByType (model VirtualMachineTemplate, ProvisioningGroup group, owner of the chain, the list 1, list 1 originalRuntimeProperties properties)

    at DynamicOps.ManagementModel.Services.ProvisionMachineService.SubmitMachineRequest (MachineRequest request)

    -End of the exception stack trace internal-

    at DynamicOps.ManagementModel.Services.ProvisionMachineService.SubmitMachineRequest (MachineRequest request)

    to DynamicOps.ManagementModel.ManagementModelOperations. < SubmitVirtualMachineRequest > b__c (r, ManagementModelEntities d MachineRequest)

    in DynamicOps.Common.Entity.OperationInvoke'1.Execute [TRequest] (Func 3 operation)

    -End of the exception stack trace internal-

    at System.RuntimeMethodHandle.InvokeMethod (Object target, sig Signature constructor Boolean, object [] arguments)

    at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal (Object obj, Object [] parameters, Object [] arguments)

    at System.Reflection.RuntimeMethodInfo.Invoke (Object obj, BindingFlags invokeAttr, Binder binder, Object [] parameters, CultureInfo culture)

    to System.Data.Services.Providers.BaseServiceProvider.InvokeServiceOperation (ServiceOperation serviceOperation, Object [] parameters)

    -End of the exception stack trace internal-

    to System.Data.Services.ErrorHandler.HandleTargetInvocationException (TargetInvocationException exception)

    to System.Data.Services.Providers.BaseServiceProvider.InvokeServiceOperation (ServiceOperation serviceOperation, Object [] parameters)

    at System.Data.Services.Providers.DataServiceProviderWrapper.InvokeServiceOperation (OperationWrapper serviceOperation, Object [] parameters)

    at System.Data.Services.RequestUriProcessor.ComposeExpressionForServiceOperation (SegmentInfo, IDataService service, checkRights Boolean, SegmentInfo lastSegment segment)

    to System.Data.Services.RequestUriProcessor.ComposeExpressionForSegments (IList 1 segments, IDataService service, Boolean isCrossReferencingUri)

    at System.Data.Services.RequestUriProcessor.ProcessRequestUri (Uri absoluteRequestUri, IDataService service, Boolean internalQuery)

    to System.Data.Services.DataService'1.HandleRequest)

    INTERNAL EXCEPTION: System.Reflection.TargetInvocationException: Exception has been thrown by the target of a call. -> System.Data.Services.DataServiceException: error the applicant unit. ---> System.InvalidOperationException: Nullable object must have a value.

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateStorageReservations (AllocateMachineRequest request, AllocateReservationRequest currentReservation, Boolean requireExactPolicy)

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateAvailableReservations (machineRequests from list 1, list 1 availableReservations, StringBuilder infoErrorMsg, Boolean requireExactPolicy)

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateStorageReservations (availableReservations from list 1, list 1 queries)

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateReservationByType (AllocateMachineRequest request)

    at DynamicOps.ManagementModel.Services.AllocateReservationService.AllocateReservations (AllocateRequest request)

    to DynamicOps.ManagementModel.Services.ProvisionMachineService. <>c__DisplayClasse. < AllocateMachine > b__c()

    DynamicOps.Common.RetryTransactionException.RetryIfNecessary (use)

    DynamicOps.ManagementModel.Services.ProvisionMachineService.AllocateMachine (model VirtualMachineTemplate, ProvisioningGroup group, owner of the channel, properties of list 1, isComponent Boolean, applyExpiresOverride Boolean, Nullable Nullable networkScopeId, VirtualMachine masterMachine 1, expiresOverride 1)

    DynamicOps.ManagementModel.Services.ProvisionMachineService.SubmitMachineRequestByType (model VirtualMachineTemplate, ProvisioningGroup group, owner of the chain, the list 1, list 1 originalRuntimeProperties properties)

    at DynamicOps.ManagementModel.Services.ProvisionMachineService.SubmitMachineRequest (MachineRequest request)

    -End of the exception stack trace internal-

    at DynamicOps.ManagementModel.Services.ProvisionMachineService.SubmitMachineRequest (MachineRequest request)

    to DynamicOps.ManagementModel.ManagementModelOperations. < SubmitVirtualMachineRequest > b__c (r, ManagementModelEntities d MachineRequest)

    in DynamicOps.Common.Entity.OperationInvoke'1.Execute [TRequest] (Func 3 operation)

    -End of the exception stack trace internal-

    at System.RuntimeMethodHandle.InvokeMethod (Object target, sig Signature constructor Boolean, object [] arguments)

    at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal (Object obj, Object [] parameters, Object [] arguments)

    at System.Reflection.RuntimeMethodInfo.Invoke (Object obj, BindingFlags invokeAttr, Binder binder, Object [] parameters, CultureInfo culture)

    to System.Data.Services.Providers.BaseServiceProvider.InvokeServiceOperation (ServiceOperation serviceOperation, Object [] parameters)

    [UTC:2015 - 06-03 11:38:41 local: 2015-06-03 12:38] [Path]: Thread-Id: 25 - Guid: <? XML version = "1.0" encoding = "utf-16"? >

    2e2cc4cb-c867-4290-8419-77489755d0c0 < guid > < / guid >

    [UTC:2015 - 06-03 11:38:47 local: 2015-06-03 12:38] [Path]: Thread-Id: 25 - Guid: <? XML version = "1.0" encoding = "utf-16"? >

    2e2cc4cb-c867-4290-8419-77489755d0c0 < guid > < / guid >

    Any ideas on what could be the nullable object that requires a value?

    Yes, this seems to be the problem, you can update using query below and see if it works for you.

    UPDATED [HostReservation] set StorageAllocationPolicyID = 4, CurrentStorageAllocationIndex = 0, CurrentNetworkAllocationIndex = 0

    WHERE HostReservationName = '. '

  • Network - cannot access one system to another in Windows 7

    In the cable system in my office, we can not able to access one system to another? His error message "cannot find the path of the network".

    Hi Jothisivalingam,

    -You're on a domain network?

    There are a number of reasons why you can't connect to other computers on your home network, or you can't share files and printers with them. I suggest you to see Help links and check if it helps.

    Why can't I connect to other computers?

    http://Windows.Microsoft.com/en-CA/Windows7/why-can-t-i-connect-to-other-computers

    See also:

    Why can't I access my home group?

    http://Windows.Microsoft.com/en-CA/Windows7/why-cant-i-access-my-HomeGroup

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • Impossible to install the wireless network adapter TP-Link on Windows XP Pro error "insufficient system resources exist to complete the requested service"

    Hello

    OT: I can not install my wireless adapter TP-Link on PC under Windows XP Pro. I continue to receive messages from "insufficient system resources exist to complete the requested service" after each reinstallation
    I had this problem since I moved into my new house two weeks ago. To my old place, my pc is connected to my router via a network cable, so everything was fine and dandy. However, to my new place, with a network cable is just not possible, so I use a usb wireless adapter to connect. I bought a TP-Link Wireless N USB Adapter (model TL-WN727N) and I can not installed.  First, I installed the software using the CD-ROM of resources which is come with the product then connected the adapter wireless on my usb port at the back of the pc. It detects the device very well, but when he wants to install the driver of this message displays "an error occurred during the installation of the device. Insufficient system resources exist to complete the requested service". When I opened my device manager, a yellow exclamation mark under Network - 802.11 n WLAN cards there. In this window, I tried:!. the driver update (latest driver same downloaded of the site Web of TP-Link) 2. Disable the device (nothing happens) and 3. Uninstall (which I just can't because another message "failed to uninstall the device. The device may be required to start the computer"is displayed). All three failed to install my wireless card. I am out of resources here, so any help is greatly appreciated.
    My PC specs:
    AMD Athlon (TM) II X 2 245
    2.95 GHz, 3.25 GB of RAM
    Windows XP Professional version 2002
    Service Pack3
    Thanks in advance.
    concerning
    gas

    T-Link support tried it yet?  http://www.TP-link.com/en/support/contact/

  • widows system error: duplicate name exists on the network

    at startup I get the following: Windows system error: duplicate name on exists on the network, how can I get rid of this?

    Change the name of your computer? See if this helps: http://support.microsoft.com/kb/295017 - B -.
    http://www.officeforlawyers.com | http://www.OneNote-tips.com
    Author: Guide to counsel for Microsoft Outlook

  • PC problem error 4609, more Services Auto off, No system, no connection network restore

    Win XP SP3:

    I can't open an element of individual logs in the application log.

    It connects 4609 error repeatedly.

    System shows a network card, but it does not show under network in the control panel.

    Most of the Auto Services are OFF... and they will not start.

    I am running an analysis of McAfee Viruscan then Stinger and Malwarebytes.

    (EDIT... Malwarebytes does not... associated with stopped services?... error is Runtime Error 32... failed to load control 'lvbalGrid' vbalsgri6.ocs.)

    What can I do else?

    I use the system update WSUS... and updates if it is enough to run on this PC.  It had not updated in a few months.

    EDIT: Device Manager appears normal.

    I have an other PC SP3 of XP which has the same symptoms:

    No network connection

    does not have malwarebytes

    no system restore

    Cannot open elements individual event viewer

    many auto services are turned off

    both started around April 21, when I published updates to the WSUS Server Windows.

    I have 2 PC more than probably having the same problem.

    Edit3: Use memory and CPU in both computers is very low... nothing happens... no network activity at all.

    solved... I couldn't wait and had to call the excellent support... credit MS Bus support!

    McAfee Viruscan has caused the problem of corrupt the windows\system32\svchost.exe file.

    I fixed it by replacing the file svchost.exe with a good known of xp sp3... and McAfee update to the latest DAT files.

    Because him copy / paste was dead, I had to use DOS or cmd.exe to copy the file from a USB key.

    http://blogs.technet.com/configurationmgr/archive/2010/04/22/Configuration-Manager-2007-task-sequence-to-assist-in-resolving-McAfee-antivirus-deleting-Svchost-exe.aspx

  • Impossible to install Lotus SmartSuite 9.8.2, access to system registry error and should then stop error.

    Original title: loading lotus smartsuite in windows 7

    Loading lotus smartsuite 9.8.2 in windows 7 I get the error message ' access to system registry error and should then quiting error. "

    Hello

    The problem is specific to the application?

    If the problem is specific to Lotus SmartSuite 9.8.2 I'd contact the IBM Lotus SmartSuite support for assistance. Consult the following link:

    http://www-947.IBM.com/support/entry/portal/overview/software/Lotus/Lotus_SmartSuite

  • Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

    This seems to have started with the last batch of updates of Windows 7 (including SP1).
    I can't connect using dial-up.  Get the message:
    Cannot load the Remote Access Connection Manager service
    Error 711: The operation could not complete because it could not start the remote access connection manager service
    in time.  Please try the operation again.

    When I try to start the Remote Access Connection Manager service manually, I get the message:
    Windows could not start the service on Local computer remote access connection manager.
    20 error: the system cannot find the specified device.

    My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

    I don't know what else might have changed.

    Hello Vince_867,

    Thanks for your post.  Take a look at this thread for a possible solution to your problem.

    See you soon

  • error system 0 x 80300113 for the diagnosis of network

    why I get this error, 0 x 80300113, package ID: diagnostics of the network, the path: windows/diagnosis/system/network, source integration results, the context limited

    Hello

    1. when exactly you get this error message?

    2. what exactly is the problem?

    Please answer these questions and tell us more about the issue. This could help us help you better.

    This error occurs generally when the date and time of the system does not coincide with the actual date and time. Check if your system clock is set according to your time zone.
    Reference: http://windows.microsoft.com/en-US/windows7/Set-the-clock

  • How to install the driver on a 64 bit system to access a printer on a network connected to a 32-bit computer?

    A clean installed Windows 7 64 bit and tried to connect to the Deskjet printer connected to a 32-bit, Windows 7 network system home. Install from the installation DVD of Windows, but not such animal on DVD? Error HP spoke only USB connection and says nothing about the network. Connection worked well when it was 32-bit.

    Why not just attach it to the machine until if finds a driver, then you can move the printer and see if it can find the printer after the driver is loaded.

  • Cloud of Console 12.1.0.4 - IO error: the network adapter could not establish connection to access Instances of the ASM

    Hello

    Using the last version of the Console 12.1.0.4 cloud. I discovered a RAC cluster consisting of two nodes.

    And if I "try access the Cloud Console ASM instances will fail with this error:"

    IO error: the network adapter could not establish the connection

    The connection descriptor has been

    (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = tcp)(HOST=rac1-vip.localdomain)

    (PORT = 1522))) ((CONNECT_DATA = (SERVICE_NAME = + ASM1) (INSTANCE_NAME = + ASM1 (SERVER = DEDICATED))(UR=A)))

    My env is:

    Console of clouds on: release of Red Hat Enterprise Linux Server 6.6 (Santiago)

    Database Rac: Red Hat Enterprise Linux Server release 6.5 (Santiago)

    Someone knows how to solve this problem?

    Thank you very much!

    Arturo

    (1) what is the user id you are using OEM fior?

    The user id should have Sysdba and should not be in the role SYSASM.

    (2) in order to check your port

    In server, in the gate of the House, listener, lsnrctl status--> Verify asm instance listed on your listening port.

    Summary of endpoints listening...

    (Check that the PORT and IP information is correct)

    Instance '+ ASM1' READY State, has 1 operation for this service...

    (3) in addition, connect to asm and check the connection

    Show u local_listener and entered into OEM parameter details are correct.

    (4) OEM, I think you add Cluster_ASM.

    Oracle_home_path--> you're grid House

    username--> with sysdbarole

    --> Sysdba role

    Cluster_name--> $GRID_HOME/bin/cemutlo - n

    Service name--> + ASM

    ADD

    NAME: INSTANCENAME

    -Home: HOST1

    listener_HOST-->< show="" parameter="" local_listener=""> exit

    PORT-->

    SID- + ASM1

    Concerning

    Krishnan

  • STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

    I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

    I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
    What about Otto
    Windows vista Home basic

    Hello

    Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/

    =========

    STOP: 0XC000021A

    Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
    (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

    Cause

    This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

    Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.


    Solve the problem

    Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

    Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

    If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

    Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

    Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

    STOP: 0XC000021A<-- read="" this="">
    * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

    -----------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
    above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
    repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
    discs of the machine system good cheap that you already own windows (you will need to reinstall
    If necessary). You can also repair disks on another computer.

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    Displays information on all the "crash" of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
    It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • WiFi access limited, error: "the default gateway is not available.

    I just bought a laptop Windows 8 last December. It had been repaired twice (change the motherboard). He works all fine until last week, wifi connectivity started showing limited access. Furthermore, my IPV6 shows no access. I tried many solutions to many websites, but all will not work. Is there another way? When I trobleshoot the problem, it will show wifi Internet but when I run Google Chrome, it displays an error of internet connection. After I trobleshoot, the stated problem is "the default gateway is not available. In addition, he recovers in about 5 minutes after trobleshooting access. I need a solution as soon as possible. URGENT!  In addition, may I know what caused this do? I hope some of you can help. :(

    Dell Inspiron 7420, unique language of Windows 8

    Hi Amos,.

    I understand that your WiFi connection fails.
    According to the guidelines of the error (the default gateway is not available), there is a problem with the gateway IP address that does not connect to the internet.

    I would be grateful if you could answer the following questions:

    1. did you of recent changes made to your computer (installation of updates, device drivers)?

    2. which antivirus app do you use?

    What are the troubleshooting steps you have tried?

    Here are a few troubleshooting steps that you can try to solve this problem.

     

    Method 1: Manually assign the IP address and the default gateway and check if it works very well. Before you assign manually the IP address and the gateway by default, do
    a note of the IP address of the computer. To do this open command prompt, type ipconfig and press to enter. This displays the IP address, make a note of it.

    To manually assign the IP address and default gateway, follow these steps:
    a. in the system, right click on network icon tray. Choose the open network and sharing.

    b. click on change adapter settings

    c. right-click on the card's wireless connection and click on properties.

    d. Double click on Internet Version 4 (TCP/IPv4) Protocol and assign the IP address manually.
    Example: Old Ip address is 192.168.0.1
    Replace the IP 192.168.0.50
    e. leave the subnet mask and default gateway are the same.
    Subnet mask = 255.255.255.0
    Gateway by default, would usually 192.168.0.1 or 192.168.1.1
    f. click apply then click Ok and restart the computer and check if it helps to solve the problem.

    If the method above does not work, proceed to the next method.

    Method 2: I suggest you try the steps from the link given below:
    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1


    If you have additional problems, please reply to this post and we will be happy to help you further.

  • System update is available in the home network only

    Given that the demand for services of motorola update is updated through google game store I get error message "system update is available in the home network only" whenever I check for the update. Is there any method to disable this error so that I can check updated even in roaming? My data even Bill for home and roaming networks so I do not think that this error doing all good its just new way to annoy users.

    Yes! You cannot upgrade to the latest version of the software on the mobile network... try using wifi if available!

Maybe you are looking for

  • my itunes won't stop me to turn on the apple music that is already checked in the preferences

    I have a macbook pro with the retina (end of 2013), 2 Ghz Intel core i7 and 256 GB. I signed up for the apple's music and it keeps telling me to proceed with the trial, then choose my plan. After that, I need to show features music apple in preferenc

  • Tecra M2 - recovery question

    I bought an old laptop Toshiba Tecra M2, without recovery CD. As far as I understand (I'm a beginner), there is no way to make recovery CD or DVD on this laptop with «HARD drive recovery» Is this good?(I saw that on Toshiba 'support newsletterToshiba

  • SD-R6112 reads the CD does not read DvD formatted discs

    ("I know there are tons of posts on this topic, but I found no relavent t my needs") I have an ASUS A2500D with a Toshiba SD-R6112 drive. It worked very well until about 2 days ago, when I reformatted my hard drive after getting corrupted. When I got

  • HP SR1610NX with Windows XP and IE8

    My 'old' desktop PC ran fine until a few months ago.  Now, this is the gel & shows "not responding".  Ran PC Doctor & test came out AMD FPU, SSE, MMX and AMD AMD tested failed.  That means & I can fix it?  We recently changed to ATT U-Verse for our c

  • My PC laptop Toshiba Satellite crashed once windows loading of updates today.

    Enough purplish blue screen when I turn on.  Any suggestions? I have no disks in the system. When I bought the laptop I diddn t pay the extra for the


HashFlare