No activity after updating BIOS on Satellite P10

Similar Questions

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Update BIOS on Satellite P10

  There is an update of the bios for my Sat P10 but I don't have a floppy drive. Silly question, but how can I update my BIOS?
  Brett

  If you download the windows version there is no need to use a disk
  http://support.toshiba-tro.de/tools/BIOS/satellite/P10/win/psp13-16/BIOS-s-P10-150win.zip

  or you can make bootable CD

• HARD drive click after update Bios on Satellite A100

  Hello.
  I just did a bios update for my Satellite A100 PSAA9, and after that I started to hear a few clicks on the hard drive, from time to time. They appear very often, but I would like to know why they started!

  The bios update was published in 26/11/2007.
  Does anyone have the same problem?

  Thank you.

  I put t think it has something to do with the BIOS update.
  I put t don't know how old you HDD is but maybe that click concern only the HARD drive hardware problem

  There are several times in my HARD disk created similar clique and sounds but it s runs great
  I didn't noticed any hardware problem however, we cannot exclude a hardware problem and therefore, you should back up important data to prevent the files from damage.

  Best regards

• Password BIOS after update BIOS on Satellite A210-131

  I just bought this laptop and update its BIOS. After update done computer turns off automatically. Then I turn them on, it ask password, I've never given an any of them in the BIOS.
  What is the password?

  Hello Jhonson

  I don't know what the password is, but please call the service provider allowed in your country, and they will help you. They can remove the password and you can use your laptop model as before.

• After update BIOS my Satellite A200-h-13 is slower

  My laptop's slower since I updated the BIOS? I bought this phone 1.5 months ago and now it takes 7 minutes to get started! Internet Explorer takes 50 seconds to start...

  I installed an update that is not compatible with my laptop? What should I do?

  I updated the BIOS on Satellite A200 (PSAE0) to version 5.20 and there is no change at all. Maybe you should back up all your important data and make the clean OS install.

  I know it sounds stupid, but you have to understand that no one here do know your own settings of operating system and what can be the reason for the slow start.

• XP does not start after update BIOS on Satellite L

  I've just updated my BIOS 2.10 to 2.20 to try to overcome a problem of overheating with Linux.
  The reboot of the XP laptop will not start. I get the XP screen for a few seconds and then the blue screen of death flashes until restarting the laptop before. The blue screen is so fast, that it's not finished writing the text - I can't see all the numbers to check the error.

  If I choose Linux Mint of my GRUB screen, the laptop starts properly. I also see the Windows partitions. I tried to boot from a XP disc to run CHKDSK, but I go to the step where it says it inspects the configuration of my then hangs on a black screen / white and there it is.

  Any ideas? Is it possible to roll back the BIOS?

  Hello

  > Is it possible to roll back the BIOS?

  Yes, you can downgrade (rollback) If you made a backup.

  Can enter you the Bios and check if the compatible mode (after updating the Bios, it might put AHCI default)?

• Re: Chinese words after update Bios on Satellite L100 119

  I updated my Bios from notebook Satellite L100 - 119 PSLA3E with version 3.20 wordwide and after that my Bios words become Chinese.

  Someone at - he first bios?

  Plese help me.

  It's strange
  Did you use the BIOS from the European driver Toshiba page?

  This book belongs to the European series of Toshiba and if you want to update the BIOS then you must use the BIOS from Europe!

  Anyway, the last BISO on page 3, 20-win and it's only the BIOS which is available
  If you need an earlier version, then you will need to contact the Toshiba ASP in your country for a maybe version older, they could help

  But check the BIOS again access the settings and set its default value
  Then save the changes and the new boot
  Maybe it helps

• Windows not start successfully after updating BIOS on Satellite P100-240

  Hi all
  After you install a new version of BIOS my laptop wouldn't start windows xp properly.
  It just freezes in a screen black, I was able to go in safe mode, but then I reinstalled windows and now it's the same problem and I can't go in safe mode as I haven´t went through all the procedures of installation of windows.
  Please help me: I can reset the BIOS to my old?

  I use a satellite P100 - 240 (PSPA3E) and any help would be greatly appreciated.
  Thank you

  Hello

  What version of BIOS you have loaded? Version 4.20?

  Normally it shouldn´t do problems, especially after upgrading your BIOS. May I ask if the version of Windows installed on your machine you´d is on the media recovery or from scratch (from scratch means install with a genuine Windows CD and install the downloaded drivers)?

  If everything fails then send you the machine and let check the laptop on certain shortcomings of the BIOS.
  Click [HERE: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] to reach the index of ASP (authorized service provider) and find one that is closest to your country.

• Problems after update BIOS on Satellite Pro 4600

  There is a problem with the computer toshiba laptop. its the fact do not install any windows OS after the Installer starts running xp there is an error message that says that the drivers of setupdd.sys could not be loaded (error code 14)

  I tried with different CDs with the same error, so I tried the procedure of the ghost image, but all in vain after reboot it is with an error that requires a kernel dll could not be found that I even used a cool ghost image but the same error.

  In fact, I upgraded the bios to a worm recent 2.60 it was beautiful, he started twice and has been used for several hours. the update was suuccesful up and running. It all started when we placed a kingston flash drive in the USB after it was working very well we copied a simple document on drive d, nothing else, it worked for half an hour. After I stopped, and then it was late at night when I started the system fine.i was listening to a song after that, he displayed the error messge system32 driver pci.sys damaged or missed.

  Then I tried everything I knew in windows xp to boot with xp cd and... etc I also formatted the hard drive to try to win98 installation gave an error also, external error to msdos, I think it's the update of the bios that is problem because windows 2000 Professional installation gave a very specific error. BIOS not fully ACPI compatible after pressing F7 in the installer of windows xp the feature ACPI went silent and requested installation good, but during the formatting the drive but it stopped with an error that the disc hard cannot be formatted.

  It's a week now. you have the previous bios file with you maybe which would solve the problem or other.
  Please guide me. I went on toshibas website 25 - 30 times but they do not have the previous bios except the last ver2.60 file

  Hi Usman

  The problem is that you can't roll back BIOS to the previous version. Just service partner chartered Toshiba for this special tool.

  Check it please this document. I have gift? t know if this can help, but perhaps you can better understand the problem http://support.microsoft.com/?kbid=330181

  Good luck!

• Problem after update bios on Satellite L505-144

  Hi all

  New here, but I know I'll be in the right place.

  I recently installed some updates, such as suggested by temppro. Now whenever my compy starts in Windows 7 64 bit, I get the following message.

  RunDLL
  There was a problem starting C:\Users\Ems and Swift\AppData\Local\prtwst.dll

  The specified module could not be found.

  I post the picture of it, but I don't know how to paste the picture.

  If someone could give me an idea what to do, I'd be really grateful the help... I tried to re - install the bios and by removing other updates... But still this msg appears...

  Thanks in advance

  Paul

  Post edited by: kochney

  just a quick note, everything seems to work fine, just this error msg, which made my nut in :D

  Hello

  Seems that the app is loading at the beginning that creates this message.
  You should check the msconfing (in RUN type msconfig and go to the Startup tab)
  There, you can check what applications are mentioned.

  You can also try to clean the registry with CCleaner. This tool is free and scans the registry and removes garbage from registry

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Graphics memory more after upgrading BIOS on Satellite A110-195

  After update BIOS spécifiée for 1.30 to 1.60 available crahpic memory: 64 MB, must be 128 MB.

  After the update or it my mistake?

  I think it's your mistake. Graphics memory you will have if you use more RAM. As far as I know use this device comes with 512 MB of RAM, but you can improve it up to 4 GB.

• Air IPad also get stuck cant activated after update 9.3 not only the ipad 2

  My ipad air also get stuck cant activated after update 9.3 Thursday so far seems that apple did not the solution... I did also his already suggests.

  Remove all the account update DHU icloud and restore from itunes, even now downgrade to 9.2.1 but still nothing... Stress really full with this apple product.

  I also have the same problem after that latest iOS update.

  Help, please

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?