No administrator user account.

Similar Questions

• Cannot change my administrative user account

  I was not able to change my standard administrative user account.  It gives me an error message.  I bought and downloaded McAfee Security online and am now having trouble with my windows firewall (which I believe is supposed to be in the off position).  I'm at the point of reinstalling my software because of all the problems I encounter.

  You must have Admin rights so is your only value user account? Change it to Admin with the invisible
  Account. Another new Admin to test and fix and possibly a 3rd to migrate to.

  McAfee will turn off Defender - to turn this back on

  Start - type in the search--> service box found at the top of the list of Services - RIGHT CLICK – RUN AS ADMIN

  Windows Defender service - change to START - AUTOMATIC

  Disable change at stop SIGN - MANUAL or DISABLED

  The above, stop the service and you must also turn on or off in the program according to the needs.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  More information in this thread
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  Windows Defender error when you restart the computer with VirusScan installed 2009
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch
  Rob - bicycle - Mark Twain said it is good.

• Problem with the administrator user account

  When I connect to my administrator user account a Windows Sidebar message immediately rises:

  "Settings.ini is being used by another process. Close the other program, and then click Retry, or click Cancel to exit sidebar. »

  The problem is that there is no other program to close so I click on no to cancel. There is also a message from Catalyst Control Centre (program of ATI technology video card) that comes immediately after the message of the sidebar:

  "The host application has stopped working a problem caused the program blocking works correctly." Windows will close the program and notify you if a solution is available. »

  I click Close Program, but no notice is. Try using Windows, I get the message "help topic is not found." I tried the system information (msinfo32.exe) and get the message "cannot collect information cannot access the Windows Management Instrumentation software.» Management of Windows files may be displaced or missing. » !!!

  All the above problem ONLY happens in the administrator user account. Both regular user accounts work fine. Windows help works very well, information system works very well!

  I'd appreciate any help to solve this problem of crazy.

  ZekeF

  If you "move" the files/folders to PUBLIC folders, you can then access them when you are in the new admin account and then you can place them in your personal folders.
  If you do not Move To and copy to options in your context menu, here is the tutorial to "help":
  http://www.Vistax64.com/tutorials/89196-context-menu-add-copy-folder-move-folder.html

  When you have completed the tutorial, try this...
  Right click on any folder/file > click Move To > scroll to the destination where will be moved to the folder/file > click on move.
  That's all. The file/folder is moved.

  Public folders are accessible to all user accounts on the computer.

• Access to my files on a nonadministrator account administration user account.

  Under windows Vista. I have an administrator user account on my machine, but it does not appear in my list of 'change user '. I can only connect to my computer via a nonadministrator account. I'm trying to access the administrator account, but it is apparently requires a smart card is inserted. If only I could get the ADMIN user account to appear in my user account to log on, I could enter my password.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• change of administrator user account

  Windows Vista won't let me change my administrator user account

  How to change your account type: http://windows.microsoft.com/en-US/windows-vista/Change-a-users-account-type#. Note: You will need to use the administrator account to do this.

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• program user accounts: administrator user account

  I created a user not knowing account is the user account administrative and when a phone rang I confirmed the password without remembering what I wrote, it "administrator user account" to change / remove it completely. Because I can't even open the computer programs, it blocks everything.  (b) I've recreated a 'Standard user' account, but it doesn't have the same functions.  PLEASE HELP ITS URGENT

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• Need permissions in Win 7 to take possession of the corrupt administrator (user) account

  I have a corrupt administrator user account that is only available in safe mode, at the command prompt.  I created another user account that gives me the Windows interface and I'm now trying to "own the administrator account to copy my files to my new user account."

  I am not able to access or change anything from anywhere or management; (Registry, other user accounts, other folders or files, properties or fields etc.) due to the restrictions on my PC.  I tried to use the takeown.exe tool, but I'm not sure what should be entered in the command line.  I read on the parameters to TO, but do not seem to get any results.

  Your advice is appreciated... Thank you!

  Since you were using the command prompt window when you created the new user, I just assumed you have made using the command:

  NET user newuser * / add

  where 'newuser' is the name of the new user?

  Did you also give this privilege to administrator newuser entering control:

  net localgroup administrators newuser / add

  While logged as administrator?

  It would be necessary to perform the actions that you are trying to do.

  HTH,

  JW

• How can I reset the administrator user accounts?

  My Windows 7 PC is now standard user. How I can change standard user to administrator. The system won't let me change.  How can I reset the administrator user accounts?  Or, how you're going to help me change the setting?

  If you have AN administrator account on your computer then the answer of Joel help at all.

  You cannot change a user account Standard on an admin on another account Admin account (AFAIK)

  Try this:

  Boot from your Windows repair disk (you DID make a?) and use system restore to set Windows to a point before it happened.

• Prevent deletion of administrator user accounts

  Hello

  My name is Muhammad Hasan Ahmed and I use Windows XP Professional Service Pack 2. I need assistance to manage the user accounts on my desktop computer. I submitted my request to a representative of Microsoft Live Chat, but she did not have enough technical information on the subject to be able to help me in this matter.

  Here's the question:

  I have 2 Administrator accounts on my computer. First story is mine, and the second account (called HOME) is for users. I use an account is protected by password. HOME account doesn't have a password. I want to keep the account of the HOUSE to delete user accounts, either this is a limited account or an administrator account. HOSPITALITY account requires administrator rights so it can't be limited account. Is there another way to do this without changing the type of limited user account? What could be the possible measures to perform this task?

  Hi mha007i,

  In addition to the post of Sajjad Mir, please see the following article:

  http://support.Microsoft.com/kb/279783

  I hope this helps!

• Store does not recognize my administrator user account when you try to upgrade Windows 8 to 8.1 Windows

  I bought an Inspiron 17 7737 directly from dell.com on 05/12/2013.  It was delivered 12/182013.  The operating system was Windows 8.  I had assumed that he would have the last version of Windows when it has happened since 8.1 was released in October. I opened the app Store and the Windows 8.1 upgrade was not available for me.  I realized it was one problem for others and that he has not pursued further at that time.  I was out of town for 2 weeks in January and has not used the laptop during this 2 week period.  When I got home, I opened the store and found placed prominently on the invitation to the free update to 8.1. I signed up using the administrator account and when I hit the download button for 8.1. I received the message "You must use an account with administrator privileges to install Windows 8.1, try connecting with the user of an administrator on this PC account and try the update again".  I checked my account has administrator privileges and tried again and got the same message. I created another user account and gives privileges to administrator and try the download again signed on this account and received the same message.  I called technical support and for more than 5 hours on 2 different days, the technician tried to solve the problem by uninstalling and reinstalling the Windows updates. When that has not resolved the problem, it "refreshed" my PC which I understood to be given to the State at the time of delivery. He had to do all the Windows (about 65) updates and tried to re-download 8.1.  This does not change the error message when you try to download at 8.1.  At that time, I was told that they were raising a technical team that search every newspaper in my machine and find a solution.  They said they'd call me at the time where there is a solution. Although my administrator account has not been recognized during an attempt to make the download 8.1, it acknowledged the role of the administrator when the technician needed administrative approval to all uninstall and reinstall activities in trying to solve the problem.

  Everyone knows about this problem?  It is resolved, and if so, how is it resolved?

  You are not alone. Many have had the same problem with no resolution. I think there's something funny to do with user accounts. Making a second account with admin privleges does not work. I would try to reinstall the operating system of hidden image and try again. A refresh like tried Dell will not do because it retains much of the data before the update; you need a clean start. Do nothing witht the account Admin other than to let Windows put up and set your password. All updates must be installed before the upgrade is displayed in the store. I have improved five facilities to win 8 and have had zero problems.

• Administrative user account controls

  When I try to delete or to rename my files in Windows Vista, I always get the statement that I don't have permission and I'm the only one on my laptop and an administrator.  How can I get rid of the boxes that tell me that I'm not allowed to delete or rename my files?

  Hello

  You can also enable the UAC SILENCER or STOP if it lower your security level.

  THIS UTILITY MAKES IT EASY TO

  http://www.tweak-UAC.com/
  Tweak UAC utility - easily put UAC into Silent Mode or POWER

  -----------------

  How to turn User Account Control (UAC) On or Off with Vista - displays all related links
  http://www.Vistax64.com/tutorials/48893-user-account-control-UAC.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows 7 administrative user account invalid password... locked out of my account user/admin.

  Help!  I put an administrative password on my computer desktop Windows 7 ultimate function.  Did not have a password reset disk.

  When the password is entered, a message invalid password, so I can't access my own account user/administrator.

  I can get on a second user account, but of course who has none of my personal files, etc.  Is there a way to bypass and reset the admin password and access my account again?

  Hi Kelperwitch.  Try to boot from your Windows 7 DVD and running system restore.  See http://support.microsoft.com/kb/940765/en-us for more help here.

  MVP (Windows desktop experience)

• Impossible to change the administrator user account picture?

  Just create new pc with Windows 7 Professional. But can not change user account for my own image using the Browse tab?

  I have on my old pc Windows 7?

  Tried changing the setting 'Apply the default user logon picture' in gpedit does not?

  Kind regards

  Hi Davy,.

  You are the administrator of the account?

  As you have tried the default user logon image, create a new user account can help you determine if the problem is related to the corruption of user account.

  Otherwise, sign in with the account that has administrative rights and try to change the image.

  Create a new user account and check if the problem persists, if the problem does not persist in the new user account, then you can fix the damaged user account.

  Create a user account

  Difficulty of a corrupted user profile

  Click on the link mentioned below as a reference:

  http://Windows.Microsoft.com/en-us/Windows7/choose-a-picture-for-your-user-account-and-start-menu

  Answer please if you have any questions.

• remove the administrator with another administrator user account. How to restore the former.

  Initially, I created an administrator account on new computer dell laptop. I created another account to administrator subsequently and deliberately deleted the old user account without keeping the files. But now, I noticed that I lost my important files and folder with photos etc please help me to restore my account like administaor and its files as well. window 7 Home Basic operating system.

  Yes. I can see the folder "satya".

  OK, now you can try this to restore your lost files:

  1. Reboot the computer.
  2. Log in under another account admin as "satya".
  3. Open Windows Explorer.
  4. Navigate to the c:\Users folder.
  5. Right click on the folder "satya".
  6. Click "restore the previous version.
  7. Follow the prompts.

  It would be a good time to review your backup strategy. A lot of people don't bother on the safeguarding of their irreplaceable files until they are suffering from a major disaster. In this way on the need to back up files regularly to a media independent learning can be extremely painful.

• does not not the application of air through non administrator user account

  We have developed an application with air.it works well when it runs with the user admin account, but it is not executed for the normal user account.

  What changes, we need to do to run the application with nonadministrator account.

  and also how to detect the reader of cd/dvd via the air application.

  Plase help me

  Thanks and greetings

  Al-Shabaab

  Hi Chandra,

  When you create your database, you this place in the application package or you use the applicationStorageDirectory?  I think that should work in the repository, it would be problematic if you're using a location such as your application directory (or any place under Program Files) because this would require elevated privileges.

  Creation of a database

  Chris

• Pavilion 500-424: the administrator user account setting

  After back out the upgrade W10. System was not enough the feeling that everything is going well under the hood. Said to run from the command prompt: sfc/scannow.  Said that he could identify the particular sticking points. My problem is that I have to run this as administrator. I am the only user listed and shows as an administrator account. Any ideas on how to fix this message for this problem and any future needs that require admin rights?

  Buddy1254, welcome to the forum.

  You should right click on the Windows logo in the bottom left.  Select the order Prompty (Admin).  Once it opens, copy and paste the command sfc/scannow in the screen after the prompt C:\ and press ENTER.  It should start the scan.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.