No all-in-One boot

I have a computer that I have a problem with setting...

It is an all-in-one PC 20-2000 a

When it is turned on the fan turns and the only sign of life is the light of flashing card reader

The research I found that a few HP desktop computers had this problem with a reader of cards before and after unplugging him and starting the PC, then restart and plug in everything was fine

This one is on the motherboard if this is not possible

The computer is around the age of 18 months

I have it all taken part but stuck as what to do next

Someone has any advice on what to try next?

Thanks for the tips

I was working on this computer for a customer who told me that it was out of warranty

But the details of the audit, it was still covered

HP sent an engineer who has replaced the motherboard

Problem solved

Thanks again

Howard

Tags: HP Desktops

Similar Questions

  • C355 all-in-One won't boot black screen

    Hi all

    I have a C355 all-in-one who had a serious problem lately. When I try to turn on the pc with the power button, it makes the whirring sound, but the screen is black and it won't turn. The power button stays on and sounds like it starts up but the screen remains black and does not turn.

    I tried unplugging all USBs thinking it could be the conflict with the other drivers, but it does not work. It usually takes 20 + attempts after pressing the power button on and off with no screen until the PC actually turns. It is extremely frustrating, sometimes over an hour before I can get the computer on! I made sure that all drivers are up-to-date, and 8.1 windows is fully updated. I don't know what else to do to try to solve this problem. This PC is not under warranty but its still relatively new. I wouldn't have to spend money on another computer for this reason. If anyone has had this problem or have any suggestions to try to fix? Thank you.

    I ended up taking the all-in-one to a repairman. The cpu has been damaged from overheating. They said it was a common problem with all-in-one which have an amd cpu and warned me to stick in the future equipped with Intel processors. The cost of the repair was too expensive for my cheap all-in-one so I got the hard drive recovered and let it go!

  • Norton 360-all-in-one-security version 4

    Hello

    I recently installed Norton 360 all in one security from a usb key, and he slowed down-my starting from 37 seconds to 50 seconds.

    All of my settings for this program are defined by default.

    Norton 360 v4 claims, it won't slow down your boot time. but he does.

    Therefore, is there a way to not make it not slow down my startup?

    Why he not slowing my startup?

    Thank you
    -

    Hello

    This is nothing unusual.
    I installed Norton Antivirus also and this scope start my computer laptop time up to 1 min.
    I have this removed from my system and passed to Avira Antivir.
    It is a freeware software and it s very friendly material resources.
    Norton needs a lot of resources.

  • HP envy 27 all-in-one: hp envy 27 starts any upward

    Spoiler (Highlight to read)

    Hello

    can you help me please

    I bought a fancy hp 27 inch all in one pc in April 2016

    and 2 days ago I turned it on in the morning and it wouldn't start windows at all the

    said trying to fix I tried everything but nothing would work.

    so I went on chat with hp and I said as he picked up and repaired but the guy said no, you buy the recovery USB stick so I bought it and it came today

    I sit all day and night try all options to get support at the start and it just won't start upward in it at all.

    IM at my end intelligence cost me 1,600.00 2 months and that it just wouldn't come not new

    one would be please to help me with this please.

    Thank you

    Hi there @Pep3,

    I hope you find your experience of positive Support Forum!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that your computer starts correctly.  I'm happy to help you with this.

    I can certainly understand your frustration with the situation, and I'll do what I can to help you through this. However, I have some information.  Please send the complete product number and check the operating system on your computer. Check out the following, if you need assistance with this information.  HP desktop PC - how can I find my model number, serial number or product? Computers HP - how to find the Windows Edition and the Version on your computer.  For now, I'll go on the assumption that you are using Windows 10.  

    The system always begins with the same message of self-healing, you saw the first time?

    When you were on with a cat person they suggest trying a system restore or recovery of the plant?  If your system is shipped with Windows 10 or regardless of the version of Windows was preinstalled, there should be a recovery partition, you can use, provided that the hard drive is not defective. In this case, try this document: HP - computers perform a recovery of the system (Windows 10) HP. That your computer does not start successfully, use the section titled "recovery when Windows 10 does not start correctly.  This will restore the original image, even assuming that the recovery partition is intact. The downside to this is any data you have stored will be gone after the factory recovery image, unless you have previously supported some of them up to an external drive or device.

    You may also want to consider some of the suggestions in this thread: Windows 10 repair restart buckles - windows10forums.com. There are several suggestions offered by some users who helped to solve this problem for others. There are also links to download an iso of Windows 10 to make an if necessary boot disk.

    Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • 8.1 Windows Pro update the problem (from Windows 8 Pro) on Envy 23 TouchSmart all-in-One...

    Hello

    I have a HP Envy 23 Touchsmart all-in-one that I bought a year ago (12/2012). It comes preinstalled with Windows 8.

    System information:

    (a) Intel (r) Core i7 - 3770 S CPU @ 3.10 GHz

    (b) 8192 MB of RAM

    A few weeks after that I had bought the system, I've upgraded to Windows 8 Pro with Media Center that I bought through Microsoft upgrade program.

    Last week (19/10/2013), I saw the option upgrade to Windows 8. 1 in the store and decided to upgrade.

    After a few minutes, I got a prompt asking me to restart the computer, and I did.

    However, I noticed that the screen has turned white, but it restarts not really - I have seen that the hard drive light was still flashing and I waited for about 15 minutes. I know it does not restart because if that were the case I would have seen the HP logo on the screen of the BIOS. A little later, the system entered into mode 'sleep' (at least the light blinked slowly as if it was the sleep). As it was late at night, I decided to leave the system alone and decided to check on it the next morning. The next morning, he was still in mode 'sleep' (as I feared) - when I tried to wake up from her sleep by moving the mouse/hit the return key, he did the exact sounds as if he were to wake up from its sleep (as it always does), but the screen is still blank. The light power button lit up constantly indicating he's awake now.

    At this point, I decided to turn off the system by holding the button for a few seconds. To restart, I saw the HP logo on the BIOS boot screen and the screen went white and nothing came.

    So I decided do a system recovery using my Windows 8 recovery CD and turn off the system with the CD in its niche. This time, the system came and began immediately to restore my OS to a previous version.

    After connecting to the system recovered, I received the following message:

    "Could not update for Windows 8.1.

    Sorry, we could not complete the update Windows 8.1. We have restored the previous version of Windows on this computer.

    0xC1900101 - 0 x 40019.

    I tried to reinstall Windows 8.1 a couple of times after that. Once to disable all non-Microsoft services and disabling all startup programs. Always the same result.

    I have no antivirus software on my other system protection of Microsoft default system software.

    Any help, greatly appreciated.

    Thank you.

    I have disabled active secure boot existing starter and the update worked.  Now we get the error of watermark "secure boot not configured correctly.  But I have re-enabled secure boot and the error disappeared.

  • printers HP officejet j4550: hp officejet j4550 printer all in one

    I have upgraded to windows 10 on my laptop. I have an hp officejet j4550 all-in-one printer. I used the boot disk and received a message that my system does not meet the requirements. This printer works on windows 10? What should I do?

    You need to upgrade the Windows 10 printer also.  Go here.

    http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645096

  • Desktop PC HP all-in-one 19-2113w: backup hard drive

    Greetings.

    I want to backup the drive on my HP 19-2113w all-in-one desktop PC on a disk external usb, with a live dvd of CloneZilla.

    The problem is this: I can't get the pc to boot from the live dvd, because it will not allow UEFI.

    I can't disable startup secure UEFI BIOS and enable boot inherited, but it does not actually change anything.

    How can I accomplish this?

    Thank you.

    I'll try the link you sent, thank you...

    15:56 no, the bios still doesn't let me make the change. It seems to me to turn off the secure startup, but when I try to activate the starting inherited, the option is then locked... what to do now?

    01/12/2014: I have installed AOMEI Backupper, works very well despite the name and it is free. Problem solved.

    UPDATE: 22/12/2014 AOMEI actually NOT work that well and I discovered that to boot from the cd/dvd, press 'esc' and then 'f9' to select the dvd player, even if you do not change the bios settings. If you do not change the bios settings, you must first disable secure boot, save changes and exit the bios, then enter a code given by the bios to finalize the change.

    In addition, windows 8.1 has an option to start a UEFI approved dvd/USB key, in "changing pc settings/parameters/backup & recovery", you can select a boot option using a device.

  • All-in-one HP Officejet J4550: hp officejet j4550 all-in-one

    My moms computer was installed by my father and already the installation of the printer. She then began having some problems when printing lines by slots empty words in words. I tried cleaning the printer option, but that has not worked, also tried the alignment of cartridges but that also had problems, sometimes it could not detect the scanner test sheet and then we would say a mistake and return to the default settings. I was then going to the computer application, but he missed. I guess that when it was installed, it was not a complete installation.

    I then started to re - install from the cd without uninstalling it first. Thought it would be OK and just replace the existing files. Sometimes, this works for programs and sometimes you will need to uninstall first. When I loaded the cd it says that this version of windows was not compatible. Then, I searched the net and found this thread of Hp.

    http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/Windows-7-and-OfficeJet-J4550-install/...

    I downloaded the new installation for win 64 files and down them, before he installed it there was an error (empty white error with a red x) and it wouldn't install. Then sent information to HP and said it has found a solution and downloaded to the desktop. Basically, he wanted to fix my installation but unplug the printer. So I did this and it worked fine during installation. Then when he got at the end during the setup I got a fatal error. Something about the configuration has expired or has been too long and we also found several files of HP. So he started to uninstall itself. I thought having bad uninstall programs, then put it back. So I did, worked well until the config part and then he did the time out or another error. The mistake of never came however duplicates. So I cancelled as fast as I could. I can print and scan from the program on the pc. But it lacks the features of the printer itself. As if I hit him scan it tells me to consult the manual. I just want to complete installation work. Any thoughts?

    I did all the steps, downloaded the packgage, uninstalled using l3.bat, did drop cleanboot, reboot, update adobe Flash Player as well as cleaning. Download the hp installation wizard. When running the wizard, it says there is a problem with my driver, then it starts to connect to the internet to download the software, but then said the download was cancelled, click Retry to try again but the retry button does not work. I have mcaffee AV, the only way ive seen turn off is to disable on the analysis of access and the firewall.

    Don't you have an another clean boot and no driver error, but the same error message when the installation wizard attempts to download the full software. Simply use the version of the software from the link has me http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645096#Z7_3054ICK0KGTE30AQO5O3KA30R1

    FINALLY HE GOT WORKING:

    Downloaded the basic print and scan driver package, ran the installation and it did not work. I started to think there must be a driver problem. Had similar problems with itunes where it wouldn't read my ipod even after an uninstall and reinstall. And for that I had to remove the driver and reinstall it, for some reason any it was causing problems.

    Make sure the name is exactly the same as the folder. After its extraction do the same for the complete package. After extraction, a HP screen may pop up, just close for now.

    1. If the printer software is installed, uninstall it.

    2. with the connected printer go to devices control panel\ Manager, right click on your printer and click on uninstall. Check the box in the lower right corner that says something like "Do you want to remove the software driver or files" then click on uninstall.

    If box is displayed, and then click cancel, right-click on your printer and select Properties, click on the driver tab at the top, then the Details button pilot. make a new file .txt on your desktop and enter in all of the files and the locations of eveything that appears. After that click OK, then driver tab, click on uninstall.

    Here are some of the files and locations but check they are all listed and not missing anything.

    c:\Windows\system32\drivers\usbscan.sys

    c:\Windows\system32\hpotscl1.dll

    c:\Windows\system32\hpowiav1.dll

    3. open a new file and copy and paste the address of each file in the search bar. It will look something like this

    c:\Windows\system32\drivers\usbscan.sys

    before hitting enter each need to be edited windows otherwise think you try to open the file rather than access the folder. So for the modified example will look like this

    c:\Windows\System32\Drivers

    the drivers folder is what you want to be in and the usbscan.sys is the file you want to check is removed. Do this for everything in your list. If the files have disappeared that has, if not manually delete them or move them to a new folder on the desktop until installation is complete just in case.

    4. (computer may or may not need to be restarted) and then unplug the printer, open the software package and the base driver and double-click setup.exe. Do the installation and when it asks you to connect the printer.

    5. after its installed according to your needs, you can either test its features to see if it has what you need or you go to install more packages / programs from the full version.  Double-click setup.exe for the full package, then it will ask you that you if you want to uninstall or install more software, select the installation of the software. He can just show 1 or maybe a little. If its does not display those you want to click on the buttons more or less recommended until you find what you are looking for. You can try to install more then one at a time, but for me it did not work, I had to do one at a time.

    As far as the folders on the desktop used for extraction, it is a good idea to keep those with your backup files unless you use a restore image, but it good to keep because the backup even images may have problems. I would recommend save their be on a cd/dvd, USB drive, external hard drive, the cloud storage lol somewhere just in case you need it again as well as installation instructions. If you have moved all the files in the driver instead of delete and your printer now works, you can remove them.

    NOTE: If keeping the package for later use, Exchange compressed files for those who have been extracted because they take less space. Unless you want to just the ones extracted. (Compressed are those you downloaded from HP in the folder downloads, extracts are those in the office used for installation folder.)

    And thank you Gemini02 for helping me with this.

  • HP Officejet 6700: HP Officejet 6700 Premium all in one network problems

    Printer = printer HP e-all-in-one Officejet 6700 Premium
    Model = H711n
    Number of product = CN538A
    Firmware version = MPM5CN1450AR
    Location = Ireland
    Printed pages total: 152
    Scanned pages: 58

    Other details available on request...

    I've had this printer for several months now, I have had no problem connecting to my wireless network and connect computers, telephones and other equipment to this.

    A few days earlier, when starting the printer display flashes with the useless error message, error in the printer, turn the printer off and back on.

    I have power cycled as requested and received the same message, over the power of the cycle he mentions turning off the power button and no DISCONNECT of the sector. Until then I had never disconnected from the sector. After that I have several attempts to power cycle the printer is off and removed the sector, has waited half an hour and powered on again once.

    Still stuck in a loop. He also briefly flashed a blue screen with the error B81431CB. So brief that it is almost useless. I had the boot sequence video and pause playback to read error!

    After some research, I decided that she was experiencing problems connecting to the WIFI network. So, I turned the wifi on the router and the printer network started as usual. Internal menus are now available and I can print status and so forth, so at this point I can exclude defects of ink or mechanism.

    I went in on the printer network settings and reset the network. I'll also through the printer to factory default settings. I have reactivated the WIFI network to the router then went to install the printer again. Digitized for wifi networks and found mine. Entered the password for wifi and the printer could not connect. Everything is good, correct ssid, signal. Report shows wifi password is incorrect.

    I have try several times to connect wifi password is certainly correct, but the printer refuses to recognize the correct password. I tried a different router, the same result. Says incorrect password. Also I tried WPS and a PIN, said still fails to connect.

    At this point, I have disabled all security on the wifi network. Bingo, printer connects to the network, but starts with the loop of error mentioned at the start of the tour and turn it back on. This above has been tried several times, the factory reset, everything ok, turn off the wifi security, the printer connects and goes in a loop.

    So, at this point wifi is confirmed to be defective. I decide to directly connect a LAN cable. Once the LAN cable is connected, a few seconds later the printer detects the network and goes back into its loop error. It will not just connect to a network via wifi or LAN. He previously worked on the network, and nothing has changed on the network, not new parameters or no new devices.

    I connected a laptop to the printer via USB and that seems to work ok, but a USB connection is not ideal and defeated the convenience of a wireless printer. I also tried to reflash the printer in case there is a corruption of the firmware, but the utility detects that the latest firmware is installed and that it is not engaged.

    Now...?

    OK I managed to make it work and I will try to explain the steps of my best.

    As mentioned previously, I tried another router, I tried the wiring, and I tried to reset the router and the printer. Nothing seemed to work.

    Out of curiosity I just put my phone in a WIFI AP. Tried connecting the printer and it worked. The printer connected to the WIFI phones.

    So I know that the printer works on at least one access point.

    Thus, in the settings of the router and firewall. The only thing enabled in the firewall have been

    IPv4 firewall protection

  • I lost the CD start to my officejet 5510 all-in-one printer

    I fell off my PC under Windows XP and my old printer hp officejet 5510 all in one laptop no longer works. I can't find my CD to reinstall boot. Is that why I get an another boot CD or a way to get this printer working again?  Thank you for your help, Sue

    You can download the full software for printer you in the section to download the software and drivers of the Portal of support for your printer.

  • HP all-in - One PC 19-2113w 19: white/black screen after upgrading RAM

    Hello

    So I have upgraded RAM using 2 x 4 GB SODIMM DDR3 Corsair 1600 Mhz, after installing the PC boots but screen is white/black

    steps to follow:

    1. I tried with 1 socket by using only a RAM, screen black

    2. I tried with 2 socket using RAM only one with the same RAM step 1, screen black

    3. I tried step 1 and 2 using the other RAM, screen black

    now here it gets interesting

    4 tried 1 socket using Original/factory RAM, screen black

    5 tried 2 socket using Original/factory RAM, screen black

    6. tried without any RAM at all, looks like a lack of RAM, screen black

    Now, to each measure adopted, I must say that the screen sound not only not showing things, but its totally black as it does at all, until the system starts normally. !

    Is it Possible the upgrade of RAM affect the screen? or maybe when I was replacing the RAM I hit some conecting by cable to screen or something?

    HP 19 all-in-ONE PC

    Product No.G4B06AA #ABA

    Model n ° 19-2113w

    10 64-bit Windows

    Update

    Removed the battery and hold the power for 30 sec button (BIOS reset if I'm not mistaken?) now it works with the orginal of RAM so I guess my new RAM that's the problem!

  • Erk - 321 has keyboard: HP Envy wireless keyboard only works after a reboot, but not at initial startup. Envy all in one office.

    Hello, for some reason, my keyboard is not working whenever I'm doing a restart. Or turn on for the first time after a stop down. The only keys that work are the volume keys.

    But if I restart by connection or desktop screen, the keyboard works fine.

    The batteries are not dead, I replaced the.

    Any info would be great. Thank you.

    I have HP Envy Beats all-in-one.  Mouse worked, keyboard no longer works unless after withdrawal of the driver for keyboard then rebooted.  Would work for this next boot, solved by disabling fast-start-up in power options, the theory is computer starts jumped linking or simply crossed it faster that the keyboard can answer.  Hope this helps you.

  • HP Officejet Pro L7590: HP Officejet Pro L7590 printer CANNOT PRINT but can browse the all-in-one software

    I lost connectivity for printing service about a week ago. Maybe it's me trying to add an older HP Cad printer plotter to my selection of printers.  So, based on the recommendations of HP:

    1. I uninstalled all drivers of HP and my pc software (all-in-one)

    2. He unplugged printer HP

    3 - reloaded HP drivers and software on the site of HP (all-in-one).

    4 - connected to the printer.

    I did several times. Together with network using ethernet cable connections as well as direct USB cable to the printer.

    Results:

    1. I can't print all the al.  either through the ethernet connection or via a direct usb cable.

    2 - However, I can scan, fax via the software on my PC HP solution Center

    3 - the printer itself is fine because I can print using the other PCs on my home network.

    So, I tried everthing I can think.  There are configuration, etc. think I cannt understand that my PC keeps me from printing.  Help, please.

    Hi flyfish08,

    Thank you for your answer!

    Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I hope that these measures will help!

  • Impossible to Document with HP Officejet 6310 all-in-One scanner

    Dear all,

    I have a HP 6310 of all-in-one desktop. My scanner was working fine until I changed my PC running on Windows & Pro. I tried various solutions proposed by the community and the last test has been with HP Print & Scan Doctor 4.3. Follow the instructions on the screen. Also I could hear the ROAR scanner far when the message to display "HP Scanning" window showing on the monitor. The program checked all checks i.e. Device Manager, Scan Driver Check, device status, window (WIA), solution, registry, Scan Flow Manager & Digital Image Monitor HP Center. Only two controls that had yellow Triangles were HP Scanner Twain and Front Panel Test. The HP Twain Scan error message was ' the twain component is used by another process even after a reboot. Remove the software by clicking 'uninstall '. Reinstall the software with the product CD or by downloading the latest full features software of HP customer service (recommended). Note: You should always be able to scan from applications such as Microsoft Paint. If this will meet your scanning needs, and then click 'Skip '.

    I am not that technica l and would really all members to guide me through the process in order to get scanner work. When I go through the movement of the scanning of a document via the HP Solution Center, I go for the selection process the file type I want the document to be registered as (somewhere e.g. office) but get an error message. I would appreciate help to resolve this matter without spending money to call the telephone helplines HP as currently unemployed. Thanking you in advance.

    Shabbir soso

    Hi Jamieson,

    I just wanted you to know that after following your instructions for uninstalling and doing the clean boot procedure, my scanner works now - thank you.

    Shabbir soso

  • All-in-one HP 1514: HP all-in - one 1514 print not because upgrading windows 10

    I have upgraded to windows 10 and since then have not been able to print from my computer. It is connected via USB.

    I can print test pages and conduct analyses, but when you try to print a document or email, it cannot communicate.

    I've done all the windows updates available for me, I've updated the drivers, I downloaded the e-all-in-one HP Deskjet 1510 serial printer drivers and full software functionality and followed the instructions. I have uninstalled and reinstalled the printer and restarted the computer after each retry.

    At first, he said that I needed to connect the USB key (even if it was connected). After uninstall and reinstall, it finally noticed that it was connected, but still will not print.

    Help, please...!

    HI @curl79,

    Welcome to the HP Forums!

    I understand that you can not print with your HP Deskjet 1514, after the upgrade to Windows 10. And I'm happy to help you!

    Please, try the steps in the following order:

    Once you complete these steps, run the program printing HP and doctor Scan and let me know the results!

    If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    Hope that these aid measures and hope to hear from you soon!

Maybe you are looking for