No AMD GPU after upgrade to win 10 - Satellite-S50-B-15 q

Hello, I have a fairly serious problem on a satellite (new) S50-B-15 q

After the upgrade to Windows 10 and re-installing Windows (including all the necessary drivers) Amd Radeon R7 m260 graphics card does not appear
I tried to install drivers from amd available on the Toshiba site, first, then some directly to amd. I had a hard time because the driver installation (kept getting the "package installation failed" error), but even now that they are 'installation', the amd radeon does not appear in Device Manager (and not at all either no longer works).

All I get in the graphics cards is the integrated gpu (Intel HD Graphics 5500), I tried to launch a program to use graphic resources to see if he would "pass" to amd, but this is not (it was a piece of advice found on a forum)

I have already spent a lot of time on this problem and would really appreciate help

Posted by Manuel Pace
Hello, I have a fairly serious problem on a satellite (new) S50-B-15 q

After the upgrade to Windows 10 and re-installing Windows (including all the necessary drivers) Amd Radeon R7 m260 graphics card does not appear
I tried to install drivers from amd available on the Toshiba site, first, then some directly to amd. I had a hard time because the driver installation (kept getting the "package installation failed" error), but even now that they are 'installation', the amd radeon does not appear in Device Manager (and not at all either no longer works).

All I get in the graphics cards is the integrated gpu (Intel HD Graphics 5500), I tried to launch a program to use graphic resources to see if he would "pass" to amd, but this is not (it was a piece of advice found on a forum)

I have already spent a lot of time on this problem and would really appreciate help

Hi, I have this same problem and have spent hours trying to solve this problem. And nothing is done, the Toshiba do not have a solution. Have you managed to solve this problem yet?

Tags: Toshiba

Similar Questions

  • Satellite L755-M1M3 driver sound problem after upgrade to win 10

    Salvation;
    I have problem with audio driver Toshiba Satellite L755-M1M3 after upgrade to win 10, the sound does not normally work in YouTube or Facebook even when I play the video files from my computer it is dug into the sound or noise goes, I update the driver but not help, can you help me please, I have Toshiba backup files how can I restore it?

    Inability of Toshiba to make the solution, always shocks me. !!! ???

  • Latitude E5520 Audio problems after upgrade to win 10

    I have audio problems after upgrade to win 10 64-bit.

    Dell Latitude E5520 IDT 92HDxxx HD Audio
    Hardware ID:
    HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
    HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A

    (1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

    (2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.

    I would be happy to provide more information and help to debug.

    To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:

    *************************************************************************
    Hello
    AS OEM Dell is responsible for the good operation of the equipment both
    and Windows. Check their documentation online with Dell Support, and
    drivers and ask questions in the forums about known problems. Make sure that you are
    Run the latest version of the BIOS, chipset and drivers.
    I hope this helps.
    *************************************************************************

    I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

    Thank you
    John D.

    johnsdagg
    AS OEM Dell is responsible for the good operation of the equipment both
    and Windows.

    Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.

    johnsdagg
    I was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

    I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.

    johnsdagg
    If I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

    The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.

  • Cool eco does not activate the Portege Z10T after upgrading to Win 8.1

    I mainly use my Ultrabook plugged in power & after upgrade to 8.1 Win Win 8 the "Eco-Office" is no longer active, constantly charge the battery to 100% when it should be 80%. I discharged the battery up to 10% and then active eco-responsible, but without success.

    Anyone have a solution please?

    First question:
    After the upgrade of Windows 8 to 8.1 Windows did you download the installation drivers Toshiba and such software mentioned in the installation instructions located on the Toshiba UE driver page?

    Its very important to install and update the Toshiba Utilities to get a good Win 8.1 working system.

  • No output micro HDMI after upgrading to Win 8.1

    My new Yoga 2 Pro has a secondary display connected via micro HDMI port. He first worked as a charm. But after upgrading to new Windows 8.1 (this is done automatically) it is no longer produced anything to micro HDMI port. Display and the cable is fully functional. But even if the screen is turned on, the computer is unable to save and apparently it cannot display anything. Micro HDMI port seems to be non-existent.

    After upgrade of windows, I tried to uninstall / reinstall the display driver. I also upgraded to Win 8.1 Intel drivers versions found on the support site of Lenovo (including the BIOS display driver Intel HD 4400 15.33.18.64.3496 and chipset 9.4.0.1026, 76CN38). But nothing seems to work.

    A solution in the forum is to change the cable, but I think that there is no sense here that the cable worked perfectly until the upgrade.

    Can anyone suggest a solution?

    Lenovo: Is there a driver for Intel version 15.36.0.3652 on the Intel Web site. However, there is a blockage on the pilot, you need to install own Lenovo driver downloads. Can you check if this solves the problem?

    Sorry, a new cable solves the problem

  • Pavilion P6130F blue screen after upgrade to Win 7 because of the NVIDIA graphic card

    My computer was working fine under Vista 64-bit. I got the upgrade CD Win 7 64 bit. The installation went well. But after a few days I get BSOD. The computer hangs at random: opening Visual Studio or even open a folder. The graphics card shows as NVidia GeForce 9100 in the Device Manager. I downloaded and installed the latest driver from HP site. That did not help. Then I installed the latest driver from NVidia site itself; This file is named: 195.62_desktop_win7_winvista_64bit_english_whql.exe, but that did not help either one.

    Taskbark of the window has a message that 'graphic NVIdia has stopped working"and then recommend downloading drivers.

    I used the program "WhoCrashed" and that's what he said:

    Crash dump directory: C:\Windows\Minidump

    Dumps are enabled on your computer.

    Saturday, November 28, 2009 16:12:22 crashed your computer
    This was probably caused by the following module: nvlddmkm.sys
    Bug check code: 0 x 116 (0xFFFFF8801013E230, 0xFFFFFA80074ED4E0, 0 x 2, 0 x 0)
    Error: VIDEO_TDR_ERROR
    Empty the file: C:\Windows\Minidump\112809-25646-01.dmp
    file path: C:\Windows\system32\drivers\nvlddmkm.sys
    product: NVIDIA Windows Kernel Mode Driver, Version 195.62
    company: NVIDIA Corporation
    Description: NVIDIA Windows Kernel Mode Driver, Version 195.62

    Help, please. I don't want to spend hours either roll back to Vista or reformat and start over. It is losing too much of my time.

    Thank you!

    Install this hotfix

    http://support.Microsoft.com/kb/976972

  • 8500 a909n all-in-one: could not find a way to install the HP Solution Center after upgrade to win 10

    Grateful for help in finding a way to install the HP Solution Center after upgrade win10.  The installation CD original will not auto-run and when seteup.exe forced to run from the DVD, offers 'output' as the only item on the menu.  The HP support web site offers only the "HP Print and Scan Doctor for Windows" I have installed and tried to run several times.  Pretty frustrating.  Prints OK from normal applications, but am really struggling to analyze.  Any help appreciated.

    I have a 8610 who worked during the first weeks perfectly under windows 8.1.

    After the Win 10 update, it does not work.  The installer who "sees" the printer on the wireless network, impossible to install drivers or programs.

    Hate to say it, but I think we're out of luck until HP fixed their software.

    Very ironic because they don't have that tell of these printers are compatible with Windows 10 messages.  Technically, that's true; It is their software that isn't.

  • PS does not work after upgrade to win 10

    After the upgrade to win 10 ch cc starts and then I get this message: a problem caused the blocking of the work programme. Window will close the program etc, etc. LR works well.

    A solution would be appreciated.

    Jim

    Thanks for the help. The adobe tech guy has found the problem with one of

    my plug-ins.

  • HP 450-011: delete the recovery partition after upgrade to win 10?

    I have a new HP 450-011 and it came with Win 8.1 and the recovery with the letter D: drive partition.  I did the upgrade to windows 10.  I made a set of recovery DVD for win installation 8.1.  Is there a reason for me not to delete the D: drive and replace it with my information?  I seriously doubt I'll want to roll back to 8.1 Win.

    Greetings,

    Have you tested the Win 8.1 HP Recovery disks before installing Win 10?

    A question is: If you need technical assistance from HP tech for a possible hardware problem. HP normally requires that the factory installed operating system to take in charge. This policy of HP may have changed during the upgrade to win 10. I do not suspect.

    You can export the recovery, Partition because it will not work now in any case.

    But you need a way to go back to win 8.1 when you need HP warranty support.

    Since you have already upgraded to Win 10, the only way to check the recovery of 8.1 Win disks is to use them and start all over again. Or the support of disks/USB recovery HP Win 8.1 on a new equivalent or larger HDD or SSD. A good installation means that you have now the factory install on this disk.

    It's a lot of work.

    The problem of guaranteed support is your problem.

    I have eliminated this problem by installing Win 10 on a new SSD. I have HP Win 8.1 on a separate SSD and win 10 on a different SSD. Possible guarantee problem solution means earn 8.1 running on HP SSD factory to check the problem of winning 10 SSD.

    Hemdani

  • Blue screen after upgrading to Win 8.1 - Satellite C850 - 17G

    A year ago, I bought a Satellite C850 - 17 G (PSKCCE) with Windows 7 pre-installed. For a small fee, I upgraded to Win 8. Worked well.

    In November 2013, I wanted to do the free update to Win8.1. There I estimated at 2.5 months and a lot of reading on the forums to complete the upgrade to 8.1 Win. Everything worked fine for about 3 weeks.

    Can I get some updated windows up-to-date pressed, restarted the laptop and it ended the history of success.
    Blue screen and I had this option was to force back to the factory settings.
    So here I am again with Windows 7.

    On the Toshiba site, I see now that my model of laptop, Satellite C850 with part No. PSKCCE is not a model of support for the update 8.1 Win. Can someone tell me why?

    It will support in the future?

    > On the Toshiba site, I see now that my model of laptop, Satellite C850 with part No. PSKCCE is not a model of support for the update 8.1 Win

    Hmm, I guess you're wrong because on the Toshiba UE driver page I could find drivers Windows 8.1 for the Satellite C850 PSKCCE
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

    BSOD issues are really bothersome, because this can happen due to hardware malfunction or also due to problems of system or driver.
    Same 3rd party software could affect systems

    That's why it very difficult to say what might cause this problem without checks unique pieces, the pilot, and the reporting system.

  • Satellite P850 - 057 Webcam does not not after upgrade to win 8.1 pro

    the webcam was working fine until what the windows upgrade to Win 8.1 pro, the webcam is not displayed in Device Manager. BIOS definition OK, I could not find a driver for TOSHIBA WEBCAM HD for windows 8.1 pro, please help

    Hello

    The Windows 8.1 does not require driver external webcam.
    Usually, the webcam driver is part of the Win 8.1 system and so the webcam should be recognized automatically.

    To my knowledge, the webcam is connected to the USB controller. You have a few unknown devices (USB devices) in Device Manager with yellow exclamation?

    By the way: you would update the BIOS to the latest State and system of Toshiba driver to win 8.1 installed?

  • T430s and create recovery media after upgrade to win 8 Win 7

    Is it possible to create a recovery media after upgrade to Windows 8 of a factory installed Windows 7?

    You do before the upgrade.
    NO.

  • Error number: 0x8024400A after upgrade to WIN XP...

    Reception [error number: 0x8024400A] after recording of WIN XP for updates reviews... What is the work around from a fresh install of WIN XP Pro?

    Hello

    Try the methods provided and check whether the problem is resolved.
     
    Method 1:
    Check out the link and follow the steps.

    Cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP, or after you install Windows XP SP3 immediately after a clean installation of Windows XP SP2.
    http://support.Microsoft.com/kb/943144
     
    Method 2:
    You can also visit this link and follow the steps.

    Temporary connection related errors may occur when you use Windows Update or Microsoft Update
    http://support.Microsoft.com/kb/836941
     
     
  • HP 15-ac000: Recovery manager does not exist after upgrading to win 10

    Hello

    I recently bought this laptop and had a free upgrade to win 10.

    Now I found the HP Recovery Manager is missing, and I guess that all of the other HP app no longer exists.

    How can I get these dos applications?

    Thank you.

    Peter

    The link in my previous post gives instructions on how to unlock Recovery Manager.

    What you need to do is:

    1. open 'C:\Program Files (x 86) \Hewlett-Packard\Recovery Manager' in the file Explorer.

    2. right click on Rebecca.exe (recovery program) and click "copy."

    3. paste it on your desktop.

    4 unzip this download http://www.fluxbytes.com/software-releases/fileunsigner-v1-0/

    5. drag your copied version of Rebecca.exe on FileUnsigner.exe

    6. right click on Rebecca.exe on the desktop and click "copy."

    7. paste in 'C:\Program Files (x 86) \Hewlett-Packard\Recovery Manager' and say yes to replace the existing file.

    8. search "HP Recovery Manager", click on it and a prompt will come, click 'Yes' and it should open.

     

    You can repeat this for other programs that are blocked. Basically, it removes the obsolete certificate which prevents opening in Windows 10.

  • HP 110-023w Desktop H5P41AA: network adapter keeps droping after upgrade to win 10

    After the upgrade to windows 10 I am able to get on the internet, but when I go on a site it says "cannot display page" or gives a "404 error".  A few times it will go not to the page, but most of the time. Try refreshing page and mighi work 1 on 3 to 5 times. Pilots refreshed and same results. Help, please

    Hello @stanback,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    "I understand that your computer displays an error message indicating that the"page cannot be displayed"or gives a ' 404 error ' after upgrade to Windows 10, and I'd be happy to help you!

    According to the list of compatible drivers for your desktop computer, there is currently no Windows 10 NIC drivers or software distributed at this time.

    In the meantime, I recommend that you follow the steps described in this document on products HP - where can I find Windows 10 drivers and software for my model?

    I hope this helps!

    Best regards

Maybe you are looking for

  • After 2 or 3 websites Mozilla links is no longer

    After that I loaded 2 or 3 pages that Mozilla shows just login then finally shows my homepage again. Restart Mozilla does not solve it but by restarting the computer doesn't. Always works while Mozilla fails to connect. The automatically add the trou

  • New native App Crasing on iPad Pro 9.7 "with iOS 9.3.1

    The native application of News will not open. He flashes open for about a second and then closes. I tried: Restart the iPad. Two reset buttons (Home + Wake/Sleep). Forced to quit smoking (double tapping home + Drag upwards). Backup and restore. I wou

  • How can I remove NoScript, I don't know how I got it and I hate it!

    NoScript is driving me crazy, I can't log on to Facebook, or open links or Windows Media... I have cleared the cache, I tried to go into options... I have to remove all the modules, extensions, and plugins? Windows 7 professional OS

  • OfficeJet pro 8610: impossible to be re - connect officejet pro 8610

    About 2 weeks, I have not connected wireless to my 8610 no problem, he printed, scanned & copied fine until this week, so I wanted to print something & he said that it was not connected. He is still connected to my home network with a signal strength

  • File error message root

    Whenever I log on my computer, I get an error message that says: "Root folder does not exist, or it doesn't have the right to access.  "Select folder root using FTP utility settings. How can I get rid of this message? Can someone help me? Thank you.