No Apple USB driver in Windows 10 Device Manager

Similar Questions

• MAX does not detect my instrument 488.2 GPIB-USB-HS, but Windows XP Device Manager only

  Hello

  I have a problem when you use the 488.2 GPIB-USB-HS, I see the device in Windows XP Device Manager, but it is not visible in the MAX, I do not see even a section for devices GPIB. However, when I try to install a new device, GPIB, the Wizard MAX tells me that it is one of the instruments GPIB installed on the computer which GPIB0 - USB-GPIB-HS. Do you know what is the reason to do this, because I want to use a multimeter in LabVIEW via GPIB, but I can't access it, I don't even see that there is a GPIB connection in the computer (in LabVIEW).

  Kind regards

  Alejandro Rodriguez

  It's the kind of old. Have you tried the last?

• WD5000AADS 500 GB hard drive. Windows XP Device Manager says it is installed and working properly, but it does not appear in my computer. Help!

  The disc was an external USB disk, but the fitting broke so I took off the adapter and I try to use it via its native SATA connectors. The disc is spinning and the computer know when it starts in Windows XP. It says new hardware found and go through the installation process. Windows finishes the installation, and says that everything is good with the world. I look in Device Manager and it says "this device is working properly" when I click on the drive properties. THEN..................... I click on MY COMPUTER and viola! No. DRIVE shown where the WD5000AADS should be there. There is nothing except my C: drive and my CD - DVD players.

  There are a few important (to me) information on this drive and I need to do.  HELP Please!

  Thank you

  twoiron

  Hi twoiron,

  • You are able to access the other USB devices on the computer?

  See the link below and run the Fixit tool available, check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  If him above fails tool Fixit check if the player is detected in disk management and has a drive letter assigned.

  To open disk management

  (a) from the start menu, click Run.

  (b) in the Open box, type diskmgmt.msc, and then click OK.

  If the drive is detected in disk management and the drive letter is missing, then assign a drive letter to the drive and check if that helps.

  How to change drive letter assignments in Windows XP

  http://support.Microsoft.com/kb/307844

• Pouvez the Superdrive Apple USB used with windows computer

  Can I use the Superdrive Apple USB with the windows computer

  Only on a USB Bus, which can provide more standard power 500 milliamps.

  Apple computers that support this drive directly have a USB function that allows it to attract more of the standard.

  Drive sharing

  If your Mac is not a built-in optical drive, and you must use a CD or DVD, you can connect an external drive as the SuperDrive Apple USB.

  You can also share disks of the optical drive of another Mac or a Windows computer that has the DVD or CD sharing Setup installed. Sharing of CD or DVD allows you to access documents stored on these disks and allows you to install some software.

• When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer.

  When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer. I use windows 7 on a laptop Pavilion dv7-6b77dx.

  Thank you.  I followed your instructions and it worked.  I am amazed by these forums.  No matter what a person has problems, there is someone out there who has the knowledge and the willingness to share with the less informed.  Thanks again for you information.

  lacroos

• Not recognized USB-6251 (detected) to the MAX but is detected by the Windows 7 Device Manager

  Does anyone have a solution to our problem?

  USB-6251 is not recognized (detected) in MAX but is detected by the Windows 7 Device Manager.

  Is our configuration: Windows 7 (64-BIT), DAXmx 9.3.0f2, MAX 4,8 and USB-6251 (S/N 12B647A. P/N 194929 D - 04 L)

  We had a 'ready' indication/led the 6251.

  We tried several things... (all do not work)

  1. we have installed DAQmx 9.3 (for Windows 7)

  2. clean MAX Database by the following

  http://digital.NI.com/public.nsf/WebSearch/86256F0E001DA9FF86256FFD005B827C?OpenDocument

  Michael B.

  Yes the 6251 appears as a DAQ hardware.  Device charger OR placed in the auto-start services window.  We have refreshed MAX.

  Success!  I had to manually start the device loader.  Even if the service has been set to autostart, it did not work.  Right-click on the service shows that the beginning was selectable.  Click Start and the service began.  Start to MAX and can now see the device.  Open the front panel.

  How does the monitor devices OR running in the interface of the status bar to the device loader service?

  I don't understand why the service was not working.  Is it a security issue?  I am logged in as administrator.  I'll try once again as a normal user.

• audio driver sounds, showing in Device Manager

  I bought a hp pc with win 7 Edition brand family for 4 years, but now his mother burned. now I had bought the new motherboard and installed win 7 home edithion, but not sound driver sound, showing in Device Manager. It automatically takes the builded driver win 7.

  Go to the website of the manufacturer of your motherboard support and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then download to a folder on your drive hard and install all of them, starting with the card mother/chipset drivers, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Windows 7 Device Manager empty

  When I opened my Windows 7 Device Manager it no device is listed.  (I'm trying to uninstall one of my device drivers)  Any help would be much appreciated!

  Hello

  Please keep us updated on the status of the issue.

  Please refer to the method 2 suggestions of Divya R replied on April 2, 2010 and check if it helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/device-manager-is-blank/981a34c5-339a-474F-bf3c-1692a5b45b1a

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope it helps.

  Thank you

• My WebCam Studio H.D 1080 p is not recognized by Windows Live Device Manager?

  Lately, I have installed Microsoft Studio Webcam H.D 1080 p. However, there are pop up messages saying that your LifeCam is not recognized by Windows Live Device Manager and load it down.  That's why I can't use IM, Vedio call etc. The pilot is the most recent.  Could you please identify the problem and fix it if tha I can't deal with the problem?

  Hello

  ·         Have you installed latest LifeCam Studio Firmware update?

  ·         What is the exact error message?

  ·         Were there recent changes made on the computer before the show?

  Follow these methods and check if that helps.

  Method 1:

   

  Run the Microsoft fixit tool and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

   

  I suggest you to uninstall the drivers from the Device Manager and reinstall the latest drivers and software for webcam on the Microsoft site and check if it helps.

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-Studio#support

   

   

  Method 3:

  Follow the steps in the article, and check if that helps.

  With the help of your LifeCam with Microsoft Live Messenger

  http://support.Microsoft.com/kb/921332

  See also:

  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more

  http://support.Microsoft.com/ph/7746

• IEEE 1284 PARALLEL USB driver in Windows XP Pro SP3 problem

  I have a max system pc which has no parallel printer port and is designed to run Windows 7 or Windows XP pro. I installed XP pro. I had bought the wrong cable (USB to DB25) and inadvertently installed a driver for it that was only compatible with Win98 or me. Now, I have the right parallel to USB cable and when XP detects and tries to install it, it stands automatically and asks this Win98 / ME .inf file that does not work. Technical Support for the cable has told me to update the USB Mainboard drivers, however, is not available for download from the manufacturer of the motherboard. I think that there is something stuck in the registry that keeps pointing to this file .inf that is not valid. I want to know how to update or delete it the register so I can get a clean reinstall the driver for the IEEE 1284 cable. Thanks in advance

  See if you can see what he listed as a hidden device when its not connected.

  Panel system and launch of open control. Click the Advanced tab. Click the environment variables button. Click the new button at the top under user variables. In the name of the variable type: devmgr_show_nonpresent_devices. In variable value, type 1. Click OK, click OK again.

  Click on the Hardware tab, click the Device Manager button. Click view on the top menu and select "Show hidden devices" in the list.

  Now expand the + box next to Ports (COM & LPT). If you can see the device listed there, right-click on it and select Delete.

  If you were able to remove it from this way, you should be able to plug the new peripheral and prompted for the drivers in the usual way.

• Windows controllers USB 8 not on the Device Manager list

  Bus controllers series not on the Device Manager list. USB ports not working do not. I tried equipment difficulty and said could not find drivers for multifunction device clicked on fix not found the drivers for it. could use a little help with that.

  USB windows 8

  Hello

  Sounds like hardware and you cannot resolve hardware with the software. Check with the system
  Manufacturer of support, their books online, the diagnosis and ask in their forums (if
  There are). Or check with a real computer store (one who does on its own in-store service
  This brand and model of laptop).

  Remember that you can not resolve hardware with the software.

  =====================================================

  Troubleshooting you can try:

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Windows key + X (or right click in the lower left corner) - (Admin) command prompt

  C:\Windows\System32\ >

  At the prompt, type in SFC/scannow above
  (There is a space between C and /)

  How to run the command "SFC/scannow" at startup or in Windows 8
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  -----

  Then run CheckDisk (chkfdsk/f/r)

  File (formerly Windows Explorer)

  Right click on drive C: - Properties - tab tools - error checking - Check

  Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8/8.1
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are identical (and
  Windows 8/8.1)
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ------------------------------------------------------------------------------------------------

  Install USB 3.0 and other USB devices
  http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devices

  Hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Set up your PC - configure your devices
  http://Windows.Microsoft.com/en-us/Windows-8/set-up-devices#1TC=T1

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ===================================================

  If necessary:

  Try to do a "Refresh you PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8/8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8/8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• problem with USB driver in windows 8

  I use winsows 8 in hp probook 4440 s with processor i3.  Recently I have a problem with my usb ports 3. they do not react like usb 3 and most of the time does not at all. I looked for a host controller driver expandable usb 3 for windows 8, but can't find anywhere because it is built with windows 8. Where can I find the driver or what can I do now?

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. The drivers are from HP. update the BIOS, chipset and the major
  device drivers embedded and separate that may affect the USB.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  Update driver and troubleshooting details (don't forget to check for BIOS, chipset,

  (and other drivers):

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Check with the manufacturer of system (manufacturer of motherboard for customized systems) updated
  the BIOS, chipset of low level driversand the major device on-board and separate
  drivers. Execute DriverView - value VIEW drivers Microsoft hide - updated from those
  without drain to their name.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
  3rd party with their own software and drivers and the other main device drivers you
  a.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP 15-ay073nia: controller hp 15-ay073nia mobile usb driver for windows 7 x 86

  Hello.

  I'm trying to find the drivers for my laptop usb but I could not find the drivers for it. I also tried to update the Device Manager, but he has not found all things.

  I would appreciate it so help me.

  Hello:

  Download, unzip and run the installer from the link below application...

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

• How to install a Superdrive Apple USB drive on my 1MAC who uses ElCapitain

  How to install a Superdrive USB drive on my new iMac that uses the ElCapitain operating system?

  If your computer came originally with a SuperDrive drive, simply plug.

  If so, Apple's SuperDrive USB is not intended if you wish, you can operate in editing a plist in the computer files.

  (138475)

• Superdrive Apple USB drive problem

  Situation: The internal superdrive on my MacBook 2009 stop working while I bought a new USB Superdrive.  And only after I plugged it in, has indicated that it is incompatible with my computer.  After reviewing the advice here, I said that most of the optical USB drives on the market are compatible with my computer, so it's something to look at.  However, this year I plan to get a new MacBook, date at which I will need an optical drive that works with newer computers.

  Question: Will be one of the current after the market of optical drives work with the new MacBook? Or should I just keep the Apple Superdrive that I currently have to use?

  Thank you in advance.

  No first hand experience, but I think that number of external optical drives from third party works pretty much any computer that has USB (and much less expensive than the Superdrive).  The only glitch, I know is that application Apple DVD Player can bother but there is a harmless hack that gets around that, or you can use an alternative player such as VLC (I never use DVD player).

  You can browse the web site OWC/mac - ventes.com.  If you know exactly what you want and need no support there are many places to watch it's maybe a dollar or two cheaper but every time that I'm not sure I call them and ask and am happy to spend the little extra to support the customer.