No Audio device is installed error message at startup

Similar Questions

• Audio device not working error message no

  OK I need help so real, fast! I think I deleted our audio device on my lap top and I need quick return before that my father would kill me!
  Whenever I go to microsoft media with what happens

  "Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.

  and on i-tunes this

  "iTunes has detected a problem in your audio configuration. Audio/video playback may not work correctly. »

  read the response of others to these circumstances did not help because I can't find the sound card, and I don't know what it looks like.

  Help, please!

  Hello

  First question: what laptop do you use?

  Secondly: Have you checked the State of the sound card in Device Manager?
  If this is not the case, do it!

  It s not very serious problem if you have changed something or deleted all files.
  You could try to roll back the OS to the beginning and your father will not notice anything ;)

  To roll back the OS go to programs-> Accessories-> system-> system restore tools

  Good luck

• "No audio device is installed" error in my ACER aspire 5736z

  Original title:

  I don't know why it says no audio installed? I checked the Device Manager, I see that it works properly.

  Hello
   
  You did changes to the computer, before the show?
   
  Method 1:
   
  Check out the following link.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   
  Method 2:
   
  Check if the audio device is disabled.
  a. right click on the volume icon and select playback devices.
  b. in the blank white click right and select the two Show disconnected devices / disabled.
  c. If the speaker is disabled, right click on it and Select it.
   
  Method 3:
   
  Download and install the latest audio drivers from the following link.
  http://support.Acer.com/product/default.aspx?modelId=3322

• Get the error message "no audio device is installed". ... in Windows 7

  Original title: I have Windows 7.  I disabled my speakers Realtek High Def by mistake.  I want to help them but my sign says "no audio device is installed." What can I do?

  I have Windows 7 and a Toshiba laptop. I was in my sound control panel, manage Audio devices.  I disabled my speakers Realtek High Def by mistake.  I want to allow them once again, but my sign says "no audio device is installed."  What can I do?

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
   
  Run the troubleshooter and check if the problem is resolved.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
   
  Hope that helps.

• I got a message "no audio device is installed", not its how I can solve this problem?

  I got a message "no audio device is installed", not its how I can solve this problem?
  Toshiba
  Windows Vista
  No 'audio, video controller, game' on Device Manager

  It seems that your audio driver is corrupted or does not.

  In this case, you need to reinstall your audio drivers...

  If you have a drivers and utility of your computer CD that you insert and reinstall your audio drivers... Otherwise, you will need to download it from Toshiba Web site... Contact Toshiba for the same Support,

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• We get an error "no audio device is installed" as he tried to use the cable from the monitor to TV

  * Original title: vista home version lost his

  Recently bought an Emerson TV that is has a PC plug. Hooked to the TV for the monitor cable and bought a mini audio cable with one end plugs into the speaker jack the rear of the computer and the other end of this cable is divided into a red RCA plug and a white RCA connector to the audio on the TV.

  Played a movie and it displays fine but I have no sound. So everything disconnected and hooked my computer following up and my external computer speakers back up exactly as it was before still have no sound.

  in the toolbar at the bottom right hand of the screen, the "speaker" icon displays red X and when I move my mouse jumper on it the message appears "no audio device is installed".

  Help!

  Jerry Fulkerson

  Hello

  You can first check in BIOS advanced settings if the onboard sound is enabled.

  You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

  Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please follow the steps below and we update with the results.

  Method 1: Follow the steps in the following article and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

   

  Method 2: Update a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Let us know if it helps!

• No sound in vista, error: no audio device is installed.

  Original title: no sound in vista, please help...

  I was angry myself in the walls for weeks... the sound, in the lower right icon, has the small x on the subject. I go over it, and it says "Volume: 0-top-speakers-Realtek High definition Audion peripheral ' but when you click on it, no volume slider appears and when right click, select open Volume mixer, but it says"no audio device is installed"in a small window. I reinstalled the drivers audio as many times, without success. In its in the Control Panel, it says that the devices are there, but when I select properties for the device and click the levels tab, there is no detail, totally blank. Help, please... I have a HP's Pavilion a6303w desktop, works with Windows Vista Home Premium sp2.

  Hello

  Step 1: It is also likely that you need better drivers for the chipset or audio device. Consult the manufacturer for the latest drivers for your sound card and chipset.

  Step 2: Also to isolate the problem, you can use another sound card and check if the problem persists.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: no audio device is installed. No sound in Youtube and games.

  Original title: audio device not installed...

  Well I ask you why I did not have a voice on Youtube and all the games, but I got voice on Winamp and Media Player. I'm going to the Control Panel Audio and its feature and there said that "No. AUDIO DEVICE INSTALED. I go to device menager, and he says that everything is OK. I need to help me pls Thanks man:

  Go to the website of the manufacturer of your PC/computer laptop down, then install audio drivers for your machine.

  Bravo,

  Jerry

• Error - no audio device is installed on the Windows Vista-based computer.

  Original title: speakers does not.

  Hi there I hope someone can help I have Emachines desktop computer, and somehow the sound has stoped working, right next to the clock is the speaker with an x icon and says "no audio device is installed, and I can't open the volume mixer. Please help thx

  Hello

  You did it all change hardware or software on your machine before this problem?

  You can follow this link & check if the problem persists.

  No sound in Windows

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Its icon does not appear in the notification area - no audio device is installed

  NO INSTALLED AUDIO DEVICE & NO SOUND, VIDEO & GAME CONTROLLER NOT TAB ON DEVICE MANAGER

  I had some problems with the sound on my laptop... sometimes the volume icon will suddenly disappear from the notification area and I can not add it even because it is grayed off the coast, unless I restarted my laptop... and after an automatic Windows Update I suddenly got errors on my sound whenever I play a game and try to mute it. After that, the volume in the notification area icon got a red X and it had the "NO AUDIO DEVICE IS INSTALLED" message!

  I tried everything I found on the net without success. I can't even enable or disable my audio driver because I have NOT any how 'audio, video controller & game' tab on my DEVICE MANAGER! I can't uninstall & re-install my drivers either because it would not uninstall first, even in safe mode. Reinstall the driver will give me an error message saying "No. MEDIA FOUND to this DEVICE DRIVER" !

  I also tried to reformat my laptop and goes back to factory settings, restore my system to a point where I wasn't having problems still, it reboot several times, always check the Device Manager if somehow the tab for its controller will magically appear and try several times to reinstall my driver... This gave me No. SOLUTION !

  I don't know what to do more and forums on other sites do no help either. I don't want to dirty my registry for fear of totally play my laptop.

  HOW can I SOLVE THIS PROBLEM? I just got windows update and not only I have problems with the audio on my laptop but I can't play games on facebook either!

  Hi Annetalla,

  You can uninstall the current sound driver from Device Manager and restart the computer to load the generic driver and check if it makes a difference.

  1. click on Start.

  2. type devmgmt. msc in the search box start and press to enter.

  3. right click on the speaker and select Uninstall.

  4 restart the computer, and vista will load the generic drivers.

  If an audio device on board, you will see the option in the BIOS. To do this, you need to read the manual that came with your computer or contact the manufacturer for this.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Vista Home Premium; "no audio device is installed" after update Realtek.

  Hello

  I recently updated the driver from myRealtek, and after reboot as recommended, I got a red X on my sound icon and the message "no audio device is installed" under the sound engineer. Realtek and Unimodem drivers audio show that they work and I uninstalled both and reinstalled the latest versions and then uninstalled and reinstalled the original ones that came on the computer, but nothing has worked. I stopped, started and restarted Windows Audio and tried restoring the system (without success) and recovery of driver (would be successful) but I have still no sound.

  I run Vista Home Premium, 32-bit, Service Pack 1 on a HP Pavilion dv6648se.

  Ideas, suggestions or comments would be appreciated, I'm starting to think that I might have to perform a full recovery of the system. Thanks in advance!

  ~ Xyli

  Hello

  The main thing is the driver version in Device Manager - the same as that of its
  you installed - you run the driver - restart until it is - you must do it manually and not use the
  Updated driver (more than initially) and not to use the restoration in the Device Manager. Also check doubke
  you actually have the appropriate driver.

  Check/settings (BIOS/CMOS) as you start screen - often F2 shows you start for the keys. Do
  its edge is activated,

  If you can not do work check with HP Support and forums for known issues. Or take to a real
  computer store (not the leeks and the glances at a BestBuy or other BigBox stores).

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  You can also disable the sound board and use a USB sound card that is not expensive.
  Rob - bicycle - Mark Twain said it is good.

• HP ENVY m6-1125dx Notebook PC: "no audio device is installed" after refresh. (No sound)

  Hi, I've recently refreshed my laptop. It was a horrible mistake. All my documents remained where they were, but all my applications have been erased. I had to redownload mozilla firefox, google chrome, microsoft office, HP cool sense, Adobe and many many more. I'm drawn to believe that this update also affects my sounds. I lost him. I tried to solve this problem and discovered "no audio device is installed". I also lost my control panel of beats (my laptop came with audio of the beast). I went to redownload this on the site of HP but he said that there is no update or downloads for my device because everything was already up to date. I tried to download the drivers, but this was not good. Why a driver would help me a device that apparently is not yet installed.

  Need help! Help, please.

  -A

  Thanks guys, but I solved the problem. When I went to the HP support page to download my audio driver, he told me that everything was up-to-date. It's because I entered my operating system like Windows 10. When I said that my operating system is Windows 8.1, it gave me a list of drivers so I can install it. Even if it wasn't under my operating system (Windows, 10), I was able to download drivers for my laptop that is operational. I downloaded the correct driver for my audio devices that solved the problem.

  Thanks anyway,

  -A

• audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes

  audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes

  Hello ShawnKohl,

  We can also try to go back to a time where he worked with system restore.

  Once this has been done, check the hat of Windows updates are available and hide the audio driver updates that are available.

  System Restore:

  Windows XP - http://support.microsoft.com/kb/306084

  Windows Vista/7 - http://windows.microsoft.com/en-US/windows7/products/features/system-restore

  Updates of masking:

  http://support.Microsoft.com/kb/902992

  Please note that in addition to that, the advice of the previous poster remains true: we want to get the latest audio driver on the system of the manufacturer.

  Best regards

  Matthew_Ha

• "No audio device is installed." Where's my audio?

  I have a HP Pavilion a6152n Desktop PC, and I'm on Vista 32 bit.  My audio was going well until I installed a GeForce GT545 graphics card.  Now I have no sound.  I don't know which driver to install, because according to Device Manager, no audio device is installed.  I think remember me the Realtek name before.

  Any thoughts?

  Some graphics cards seem to disable audio internal, because they take audio over himself.
  Have you checked BIOS to reactivate audio internal?

  C.

• When you try to update I get files no long registered or installed error message. I click on register or update for me. said was both 100% try again & get the same

  I can't update I get is more rgisteed or installed error message. When I try to fixit I get error report faild to install components. I can't get scurity essentials to install. What should I do to fix this

  Hello

  I suggest try to reset the Windows Update components, follow these steps:

  1. Open a Windows command prompt window. To open a command prompt, click Start , and then click run. Copy and paste (or type) that follows the command in the Open box, and then press ENTER:

     cmd

  2. Stop the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • net stop bits
     • net stop wuauserv
  3. Delete the qmgr*.dat files. To do this, type the following command at a command prompt and press ENTER:
     Del "%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat.
  4. If this is your first attempt to troubleshoot Windows Update by following the steps in this article, go to step 5 no proceed to step 4. Step 4 should be done only at the time the Troubleshooting If you cannot resolve your Windows Update problems after following all the steps but step 4. The steps in step 4 are also carried out by the "aggressive" mode of the fix it Solution above:
     1. Rename the following files to *. BAK:
        • %SystemRoot%\SoftwareDistribution\DataStore
        • %SystemRoot%\SoftwareDistribution\Download
        • %Systemroot%\System32\Catroot2

        To do this, type the following commands at a command prompt. Press ENTER after you type each command.

  • Ren %systemroot%\SoftwareDistribution\DataStore master
  • Ren %systemroot%\SoftwareDistribution\Download master
  • Ren %systemroot%\system32\catroot2 master
• Reset the BITS service and the Windows Update service for the default security descriptor. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
  • SC.exe tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  • SC.exe tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
• Type the following command at a command prompt and press ENTER:
  CD /d %windir%\system32
• Reregister the BITS files and Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
  • Regsvr32.exe atl.dll
  • Regsvr32.exe urlmon.dll
  • Regsvr32.exe mshtml.dll
  • Regsvr32.exe shdocvw.dll
  • Regsvr32.exe browseui.dll
  • Regsvr32.exe jscript.dll
  • Regsvr32.exe vbscript.dll
  • Regsvr32.exe scrrun.dll
  • Regsvr32.exe msxml.dll
  • Regsvr32.exe msxml3.dll
  • Regsvr32.exe msxml6.dll
  • Regsvr32.exe actxprxy.dll
  • Regsvr32.exe softpub.dll
  • Regsvr32.exe wintrust.dll
  • Regsvr32.exe dssenh.dll
  • Regsvr32.exe rsaenh.dll
  • Regsvr32.exe gpkcsp.dll
  • Regsvr32.exe sccbase.dll
  • Regsvr32.exe slbcsp.dll
  • Regsvr32.exe cryptdlg.dll
  • Regsvr32.exe oleaut32.dll
  • Regsvr32.exe ole32.dll
  • Regsvr32.exe shell32.dll
  • Regsvr32.exe initpki.dll
  • Regsvr32.exe c:\windows\system32\wuapi.dll
  • Regsvr32.exe c:\windows\system32\wuaueng.dll
  • Regsvr32.exe wuaueng1.dll
  • Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
  • Regsvr32.exe c:\windows\system32\wups.dll
  • Regsvr32.exe wups2.dll
  • Regsvr32.exe wuweb.dll
  • Regsvr32.exe qmgr.dll
  • Regsvr32.exe qmgrprxy.dll
  • Regsvr32.exe c:\windows\system32\wucltux.dll
  • Regsvr32.exe c:\windows\system32\muweb.dll
  • Regsvr32.exe c:\windows\system32\wuwebv.dll
• Reset Winsock
. To do this, type the following command at a command prompt and press ENTER:
netsh winsock reset
• If you are running Windows XP or Windows Server 2003, you must set the proxy settings. To do this, type the following command at a command prompt and press ENTER:
  Proxycfg.exe d
• Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
  • net start bits
  • net start wuauserv
• If you are running Windows Vista or Windows Server 2008, erase the BITS queue. To do this, type the following command at a command prompt and press ENTER:
  Bitsadmin.exe/Reset /allusers
• Install the latest Windows Update Agent. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
  949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer
• Restart the computer.

WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows

Hope the information is useful.