No audio HDMI via HDMI to SONY LED TV connection

Similar Questions

• No audio HDMI with Windows 7 Ultimate

  Since the departure of Vista with Windows 7 Ultimate, I lost audio HDMI.  I can connect video successfully to my Sony KDL46VL150 but will not come out through the home theater system.  It comes via the laptop.  I tried to update the drivers, but clearly, I have not found the right pair.  I tried as well through the website of HP, and Intel.

  The audio drivers in the system are now:

  Stwrt64.sys IDT High Definition Audio CODEC Version 6.10.6276.0

  Intel(r) High Definition Audio HDMI IntcHdmi.sys Version 6.10.0.2056

  I suspect that the HDMI driver is not 64-bit.

  Any other suggestions?

  Thanks for the tips.  I downloaded the drivers and the saved on the desktop as you suggested.  However, I could not find the graphics driver as you have described.

  I also followed the following suggestion I had to re-boot with the HDMI cable connected to the TV and it worked.  I see now that I have 2 identical drivers (Mobile Intel 4 Series Express Chipset Family) loaded in graphics cards.

  In any case, the problem is resolved.

  Thank you very much.

• Problem with my Acer Aspire 5552-5686 and 5.1 Audio HDMI

  Hi all, I recently bought a SONY HT-SS380 Home Theatre, and I tried to connect it to my Acer Aspire 5552-5686 by HDMI port. (I have Windows 7).

  My problem is that I have can´t set up the laptop to use more than 2 channels (stereo). I ve been looking around the internet and there seems to be a common problem with this computer, but I can´t understand why or how to fix it.

  I ve tried to install the latest Realtek Audio drivers, the Catalyst Control Center, some Audio HDMI of ATI drivers. I Don t know what else to try!

  Any help?

  Thank you very much!

  This isn't the audio chipset of this system, which I listed above.

  The audio chipset to send the data in 5.1 surround.  The HDMI port would support, if it was sent.

  It is not sent in this way, I listed above.

• Media Center Audio HDMI works partially

  Under Windows 7 Ultimate on a HP laptop. The HDMI port on the laptop is connected to my HDTV 1080 p. The sound works fine through HDMI when I navigate the menus. All sounds click and selection in Media Center out of the TV and they sound wonderful: rich, deep tones. The sound does NOT come through the speakers of the laptop. It clearly comes through the cable HDMI and HDTV.

  (Sorry to be so redundant here sounds but I needed to make it clear that HDMI audio through the TV works somehow.)

  However, when I play recorded TV or live TV via Media Center, it is without audio at all. When I run the audio Setup Wizard in Media Center, I get the same result. I hear all the button press tones when executing step by step through the wizard, but the actual trial play without audio through the HDTV. I did the audio HDMI by default in Control Panel, but it does not help.

  I got exactly the problem you described.  All the sound elements worked perfectly except for the live TV or record tv.  I tried all combinations of options that I could, I finally found this site with a slightly different question, but the settings got my audio work for the tv.
   http://www.gilsmethod.com/how-to-enable-HDMI-audio-using-your-HP-Pavilion-Media-Center-PC
  Goto Control Panel / hardware and sound / manage audio devices
  Make sure Realtek Digital Output Audio is the only one his device enabled
  Update highlight digital audio output, and select Properties
  Then select Supported Formats tab
  Deselect formats all encoded; so no encoded formats should be checked in this section (Note: If you do not select a format and then hit test you won't notice any noise is heard during the test)
  Make sure that only 48.0 khz is selected in the section of sampling rate
  Apply the settings
  Return to the Media center and sound should work for live TV

• Laptop HP TouchSmart 15: Audio HDMI notworking

  Hi team,

  After the upgrade to 1604 10 update Audio HDMI windows does not work in my PC laptop HP TouchSmart 15,

  non - model E6F34PA #AB4

  I tried almost all possiblties Google serach.

  1 put updated driver from compmgmt.msc

  2 re-ntsall IDT Audio driver of Intel

  2. use of the easy software I have updated all drivers.

  but it still shows no Audio HDMI sound source.

  

  When to check event under driver, I found the message below.

  Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101 & REV_1000\4 & 2ffee478 & 0 & 0001 requires installation.

  

  could you please help on this issue.

  Thank you

  Riou

  Hello:

  Here's what you need to do to get the HDMI audio to work...

  Download and save, but are not run this graphics Intel W8.1 driver.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63750.exe

  Download and install this free utility for files.  The 2nd file is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, right-click on the file of the Intel graphics driver that you downloaded.

  Select 7 - Zip from the list of items.

  Have 7-zip extract of: and leave it to decompress the file in the file name (sp63750).

  After 7-zip created the driver folder, go to the Device Manager and click on the Audio device high definition with the! Select this option.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and the Intel HDMI driver should install.

  Then restart the PC, and you should have video and audio plays from the HDMI port output.

• Loss of whem audio hdmi is plugged

  Hi, I have a new hp pavilion i5 and the audio works fine until I have plug into my 25xi Pavilion with an hdmi monitor. theres no speakers or headphones don't jack on the monitor

  Hello:

  Can you go to the "manage audio devices" under the material and audio menu in the control panel and select the integrated sound card?

  I'm sure that when you connect an HDMI cable on a device, the sound from the audio chip in the chip audio hdmi, so see if you can change to the edge and then you should have your sound back.

  The computer has no idea that the device at the other end of the hdmi cable has no audio capabilities and just assumes he did and think he's doing you a favor by automatically switching the audio chips.

• Acer E5 problem audio hdmi 571G

  Please tell me why when I connect to a TV with an HDMI cable, I have the video signal, but not his!

  I have the latest driver update(video,audio,all)!

  In (audio) playback devices, Digital Audio (HDMI) (not connected) gray apear and I can ' t change anything! "

  The cable is good because works(video+audio) with another laptop and even TV!

  Help, please! I'm updating the bios, installing and reinstalling drivers... nothing works...

  the last things to try, if you haven't tried to alread:

  Uninstall the Intel drivers and check if the HDMI reading is always there and check if it works

  Uninstall the nvidia drivers and check if the HDMI reading is always there and check if it works

  She has some problem of drivers, but without the cell phone in the hands, it is very difficult to restrict the question.

• Laptop HP Pavilion 15 t W0P57AV: Audio HDMI problem

  I have a new laptop that I just got ordered directly through the HP site. I plug the HDMI cable and plug the cable on my TV and I get no sound on my TV. I already have a click with the button straight on the volume icon and selected playback devices and there is no device audio high definiion listed. I also have a click right and select Show Disabled/switches and nothing appears.

  How is it possible to have a new laptop with no Audio HDMI capabilies? Help, please. I tried to figure this out for days.

  Hello:

  See if reinstalling the Intel HD audio driver and restart the PC solves the problem.

  The graphic driver install the HDMI audio driver.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  http://ftp.HP.com/pub/SoftPaq/sp76501-77000/sp76613.exe

• How to make my computer send all audio data via an optical audio cable instead of making headphones?

  Howdy,

  To listen to the radio online or CD played from my computer, I used to connect the computer to my entertainment system at home since the headphone jack of the computer to the port on my home entertainment system.

  Now, I wanted to get a better sound and bought the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the system entertainmeny home via digital cable optical, rather than by the headphone. If I just disconnect the cable between the headphone and the port to THE and have only the PC and the system connected with the optical audio cable, I can't hear any sound. I suspect that the computer is not sending the data through the optical audio port. I'm not able to figure out how I can adjust the settings on my computer so that, from now on, all sounds are emitted through the optical audio.

  (1) I want to do it especially for my desktop HP (configuration below) and advice on how to do this would be appreciated.

  (2) I also have a HP laptop (configuration below) and I was wondering if this would be feasible too (even if she does not have an audio output, but it has an HDMI output - you can convert audio optical?)

  Thanks in advance!

  My office is:

  WANT to h8xt,
  • Windows 8 64
  • 3rd generation Intel (r) Core processor quad-core i7-3770 [3.4 GHz, 8 MB of shared cache]
  • 12GB DDR3 1333 MHz SDRAM [3 DIMMS]
  • 1 TB 7200 RPM SATA hard drive
  • No secondary hard drive
  • 1 GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
  • 300W power supply
  • DVD SuperMulti burner
  • LAN wireless-N (1 x 1) card
  • 15-in-1 reader cards, 2 USB 2.0 (front), 2 USB 3.0 (top)
  • No additional desktop software
  • No additional security software
  • No TV Tuner
  • Beats Audio (tm) - a built-in studio quality sound
  • HP USB volume control keyboard and mouse with Win 8 keyboard
  • Adobe Premiere Elements and Photoshop Elements 10

  And the laptop:

  HP ENVY 15t Quad

  Hello @_goma,.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I read your post about how you want to send all the audio data via an optical audio cable instead of the headphone jack of your computer, and I'd be happy to help you in this case!

  To configure your desktop computer to activate the optical audio cable, I advise you to follow the steps below:

  Step 1. Click on the button of the Windows key on your desktop

  Step 2. Type "Control Panel."

  Step 3. Select "Control Panel" in the upper right corner

  Step 4. Select sound

  Step 5. On the Read tab, right click on the white box under available devices

  Step 6. Select "Show disabled" and "show disconnected devices".

  Step 7. Connect your Audio optical cable

  Step 8. Select your cable Audio perspective as the default device, and click 'enable '.

  Because it is not possible to convert the audio output HDMI output on your laptop, it is regrettable that the laptop is not able to connect with an optical audio cable.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• I recently bought dlna compatible sony led and lcd TV

  I recently bought dlna compatible sony led and lcd TV. I can't seem to be able to access and read the contents of my multimedia nas drive to my sony devices, any help will be appreciated

  Contact Sony support.

• Sound suddenly does not work but the bars audio always in movement. Windows 7 audio driver: VIA High Definition Audio

  I turned on my pc and tried not to watch a YouTube video when I realized there is no sound playing. I tried to play a video file saved on my pc, still no sound. tried an mp3 player and still no sound. everything worked very well 24 hours earlier. the green bar on the sound in the status bar icon moves when I play something, but I can't just release anything.

  motherboard: ASROCK N68C-S UCC
  audio driver: VIA High Definition Audio
  Windows 7 latest updates installed.

  I have spent 10 hours reading all over the internet and have done the usual troubleshooting:

  • system restore
  • Driver update (from disk as well as site)
  • try different audio jacks
  • using different external speakers
  • playback enabled devices
  • System speaker levels are full
  • active volume equalizer
  • used Microsoft Fix it Audio Playback, which is no problem
  • Run the audio Troubleshooter in Control Panel, no problem found

  I even reformatted and reinstalled windows, hoping it would be like, but it was useless because I still have no sound.

  can someone please help me find a fix for this.
  If a system format has not fixed the problem, im only left thinking that its edge is completely dead and I need a new sound card?

  Hello

  I imagine the inconvenience that you are experiencing.

  I suggest you refer to the section 'I tried all solutions here and still can get my sound to work correctly ' from the link:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Anatel Sony wireless mouse connects erratically with cursor. Battery life is very good. It also seems

  Anatel Sony wireless mouse connects erratically with cursor. The battery life is very good. The cursor problem also seems to be making the top and down arrows on my wired keyboard. When the cursor is engaged the arrows will work. When the cursor does not connect correctly the arrows do not work. The surace the mouse is on doesn't seem to be a factor.

  
  

• No audio HDMI laptop computer connecting VAIO from Sony Soundbar

  There is no audio signal when connecting my VAIO SVF14N13CXB win 8.1 race to a bar of his Sony SA-CT26OH.

  Video works very well, and it worked when I "upgraded" to windows 10.  However when I returned to Windows 8.1 it wouldn't work. I tested the cable connecting it to a different TV and audio/video works great.  I've updated all the drivers and showed ' disconnected/disabled' features in the sound settings, but it shows same never a HDMI output for me device allow the way it does on the other TV.

  Bingo!  I thought about it!

  The only way that it would recognize the attached device was if I restarted the laptop and booted up it with the already connected HDMI cable.

• Dolby Digital Audio output via HDMI on Satellite A200 cable?

  I don't see how to get a Dolby Digital signal on my laptop!

  I have a screen LCD HD 1080 p television. With the help of a cable HDMI from laptop to TV gives a beautiful image. I then use an optical link between TV and Surround amplifier... However the amp does not recognize the signal as a Dolby Digital signal.

  The record is not clear on issues of Audio. The Toshiba HD-DVD player shows Dolby Digital option and I guess that's out put down the HDMI cable? I hear through the TV speakers.

  Hints would be much appreciated.

  Concerning
  Paul

  Hello

  To be honest I didn t know that there is Satellite A200 laptops with HDMI output. Can you please tell me what A200 you have (A200-xxx)? Are you really sure have an A200?

  Back to your problem: as far as I know the Digital Dolby audio can be sent if the laptop has S/PDIF port. You must also use an optical cable and connect laptop to your amp directly.

  What you do now is send the signal to the TV only. I don't really know if you can browse the Dolby signal to the amp.

• Problems audio HDMI - Aspire V Nitro

  Hi all:

  I have a problem with my laptop Aspire V Nitro. I have a Sony amp that I use to listen to the radio and play music. I have 2 speakers and a subwoofer connected to the amplifier. When I play the radio on the amplifier or when I connect an HDMI android Tablet and play music, the speakers and subwoofer working great. When I connect my laptop via HDMI cable, only labour speakers, subwoofer is off. I tried to update the audio drivers, etc, etc, but without success.

  ¿Any idea what's wrong?

  Thank you and best regards,

  Ignacio

  Right click on the speaker near the clock icon and the date, choose playback devices, click on HDMI and click on configure, you are able to put the 2.1?

  If this is not the case, check on the options of the Intel VGA drivers.

  I think HDMI is streaming a pure audio (stereo) 2.0 for the subwoofer is not involved, or you should check some settings of your amplifier to activate the subwoofer even without the active secondary channel streaming.

  Please check if your Intel VGA driver is the latest available on the Acer support Web site:

  http://us.Acer.com/AC/en/us/content/support