No audio on 2035 LCD monitor

Similar Questions

• HP Pavilion Slimline s5-1414 connection LCD monitor & projector problem

  I bought a HP Pavilion Slimline s5-1414 with Windows 8, for my church, which came standard with 2 DVI ports. I attach a LCD monitor to 1 Port and a projector to another. Start the computer and both screens remained blank. I disconnect me the projector, restart the computer and the monitor running normally. I then connect the projector in the other port and it works as expected. However, when I restart the poster blank rest until I have do as above. I also reset the BIOS to the default settings, and both screen and projector came fine. Yet once, when I restarted, same problem. I manually set the resolution for both devices. Problem remains - every time that I reboot, displays may not run until I disconnect the projector, reboot, and after successful reboot, reconnect the projector. Any suggestions?

  Thank you for running these tests and getting back to me. I think that it is prudent to exclude at this stage of material. I have two options for you to try.

  I would like you to reinstall the graphics driver.

  Press the Windows key + Q to bring up the search

  Type 'unit'

  Click on Device Manager

  Expand graphics cards

  Double-click Intel

  Click the driver tab and click the uninstall

  Restart the computer

  Windows will automatically detect the missing driver and reinstall it on reboot. Once you are in the start screen of Windows, shutdown, connect two screens (a screen and a projector or two monitors, anyway) the computer turn on and I would like to know what the results are.

  I would also try both screens set before to turn on/off mode safe. You may need to press and hold the ESC key lighting to get the option come up, instead of SHIFT F8 as set out in section. Take a look at this article to get the procedure start mode safe. Let me know what you find

• Satellite L - LCD monitor flashing black after desktop management

  My LCD monitor started flashing black at startup. It is not if I sign out and then sign back in, only at startup. Can I open a session, the office charge and everything seems normal, then after about 7 seconds, everything goes black, then quickly, the bar tasks appears then disappears and then the desktop becomes visible again momentarily but turns black again. He quickly repeated it two or three times then starts normally.

  Everything seems to work fine otherwise. I disabled my antivirus, so it would not start but that did not help. I did a registry clean up lately so I've restored everything back to well before it began and that has not helped either. I did a lot of installation and uninstallation of software recent but is unable to identify anything that might have caused it. This computer is about 2 years old. I have Vista 32-bit, service pack 2.

  Someone at - he never seen this before or have any ideas what might be the culprit? Appreciate very much all the advice.

  Hello

  I doubt that this problem has something to do with the software or some registry keys. I think that it s unwanted material.

  It would be interesting to know if you notice the same problem on an external monitor. Thus, you can check if the problem is the graphics card or just the monitor internal, but in both cases, Exchange material would be needed.

  Are you using the preinstalled Windows of Toshiba and what cell phone you have?

• My lcd monitor does not display

  My lcd monitor doesn't display, the Green flasheds light 99 - 100 times then turns orange for approximately 30 to 36 seconds then blink green. When Green flashing can turn on standby, but then only Amber can not stop amber eve

  My lcd monitor doesn't display, the Green flasheds light 99 - 100 times then turns orange for approximately 30 to 36 seconds then blink green. When Green flashing can turn on standby, but then only Amber can not stop amber eve

  Tried another monitor?

  (If not - do.  If the other monitor - a larger - hopefully works, then you know that it's a hardware problem).

• Code 80070005 that I tried to install a update for my HP w1907 wide LCD monitor since I got this computer last year, but the installation fails every day.

  I tried to install a udate for my HP w1907 LCD's wide screen since I got this computer last year, but the installation fails every day.

  Thanks for the clarification, jackfrompa. If the monitor works to your satisfaction, then I see no reason to update his driver unless there is a Security problem with the current driver.
  I can't find info list of video drivers of HP being a security risk.
  Is the latest driver display on the site of HP for Vista Premium 32 bit for the HP w1907 19 inch Widescreen LCD Monitor

  Version: 2.00 Rev a.
  October 16, 2008

  There is also a driver for LCD 19 inch HP w1907 screen available for Vista which was released in October 2008 with the same Version, but I don't know if it is the same driver for the HP w1907 19 inch Widescreen LCD Monitor.

  If it helps, here are the steps from HP for a monitor driver installation in Windows 98, Me, XP and Vista .
  MowGreen Services consumer safety update

• Request driver for Sony Vaio PCVD-15XM1 15 inch LCD monitor

  Request driver for Sony Vaio PCVD-15XM1 15 inch LCD monitor... Please help, I can't find on the web sony manufactur...

  Visit this link to sony

  http://eSupport.Sony.com/us/Perl/SWU-download.pl?upd_id=912&MDL=PCGC1VN
  If you encounter problems with the movement of eye contact with Sony.
  http://community.Sony.com/?XID=M:header:eSupport

• HP w2338h 23 '' diagonal Full HD Widescreen LCD Monitor - this can be used as a TV?

  Hello

  This LCD monitor can be connected to a comcast box and used a TV? I am not knowledgeable on the jargon and terms related to the display technologies so may not be the question in a technically correct way, please forgive this. What we have is a proper HDTV in the living room and a connection from comcast as a cable source. I want to use this HP monitor as a second display for my laptop computer and if possible in a bedroom tv. I have a coaxial output available in the bedroom, but I guess that can be used at all. If the answer is Yes, it can be used as a TV, then what all is necessary to do so (fancy cables? / some other hardware?)

  Thank you.

  You go needed an another Comcast set-top box (STB) with a HDMI to get the best picture. Do not spend a lot of money on an HDMI cable.  www.pccables.com has good HDMI cables at a reasonable price.  You can always connect your laptop to the screen with the VGA cable.

• Cannot download software display update for HP w1907 LCD monitor

  ORIGINAL TITLE: Wide w1907 HP HP - display - LCD monitor download size: 58 KB type update: software update Optional HP Display released in August 2009

  I can't download this update... when I try redirects me to another site. This is the information that I receive...

  WinQual has moved!

  Our new home is sysdev.microsoft.com, you will find the tab Dashboard on material areas and the Office of Windows Dev Center. Equipment and Dashboard Desktop, you can continue to: Certify your hardware for Windows and office applications Distribute drivers using Windows Update Get reports on your products Provide metadata for your device or system Use the remote debugging tool Please update your bookmarks. I don't know how to upgrade my favorites to receive the updates of this file system. I'm having a time hard to find information about obtaining the updated... any help would be greatly appreciated.  Thank you.

  HP - display - HP w1907 LCD wide screen
  Download size: 58 KB
  You may have to restart your computer for this update is taken into account.
  Update type: Optional
  Software update HP Display released in August 2009
  More information:
  http://winqual.Microsoft.com/support/?DriverID=20290332
  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  It has been almost 24 hours and no one answered.

  I'll try to help out you then maybe someone else will respond when they see my post.

  I have no knowledge of this site sysdev.microsoft.com but you should be able to find the update it.

  However if your monitor works fine this update is not necessary.

  Furthermore, no is not recommended to take this update from Microsoft.

  You should go to HP.

  This updated driver is dated 2009.

  HP has an updated driver for the monitor of the 2011.

  http://h10025.www1.HP.com/ewfrf/wc/product?CC=CA&LC=en&DLC=en&product=3351967

  Go to this page and click on software and Driver Downloads and answering questions before downloading.

  It's your choice whether you take it or not.

  If you take it the next time you access Windows Update this update should not show.

  If you don't take it and do not take the other's you can hide it by right clicking and select "hide update".

• HP w19 19 inch LCD monitor P8739AA

  I have a HP w19 19-inch LCD monitor P8739AA which is in working condition except one very important thing, the external control unit must be replaced.  Over a period of time, the on/off button became more and more difficult to use nothing really behind him and now it is simply not in touch with at all.

  It is that only a connection Ribbon to get a replacement or should I say is the part available to fix it.

  Hi priseman. HP PartSurfer shows unfortunately no control panel replacement parts. The User Guide does not refer to spare parts either.

• Case for the dc7900 Desktop support can make an LCD monitor?

  Looking for advice on monitor placement. A desktop computer HP Compaq dc7900 Small Form Factor PC (non-tour design of the horizontal case) can support the weight of a 19 to 22 '' LCD monitor?

  Any suggestions or ideas on this would be appreciated?

  This document of QuickSpecs HP Compaq dc7900 may be able to help.  Maximum weight of support, see page 8.          http://h18000.www1.HP.com/products/QuickSpecs/13029_na/13029_na.PDF

• Random HP 2311 x 23 "LCD Monitor

  I bought a HP 2311 x 23 "LCD monitor from Best Buy, 11/25/11 but I did have problems with it until the last two days. For the last four days (17/12/11 - 12/21/11), I noticed that whenever I'm playing some games, the monitor will go black for a few seconds and then the display will return to normal (display of the game without any changes at all whatsoever) except the Status window Monitor HP will show for a seconds then disappear. In this case, the power button on the lower left side of the monitor, which is usually blue, yellow signal for a while before returning to his standard blue color.  This will occur at random times and twice now, he'll do it again and again for literally a whole minute before it stops. I noticed that this specific event stops happens if I stop playing certain games, which include Shogun 2 and Batman: Arkham City. Once I have stop playing the game, the event is will produce prevalence up to the stop with less and less together, but the moment I start playing Shogun 2 or Batman: Arkham city, the event will happen 5 minutes in the game.

  I noticed the problem just after I've updated my card driver 285.79 GFX driver Beta International Bureau Win7 64-bit (update for 11/13/11) to 285.62 Office Win7 64 bit driver (update for 11/14/11). I also tried to update my driver to the most recent driver beta for my GFX card, 290.36 driver Beta International Bureau Win7 64-bit (update for 11/19/11), before returning it back to the 285.62 Office Win7 64-bit driver.

  I tried to update my GFX card to the more recent driver, and when that doesn't work, I tried to uninstall and then reinstall the latest driver of GFX card. I did the same thing with my driver software monitor as well as with no luck. I even tried resetting the monitor to factory settings, unplug then re - connect the power to the monitor and unplug then re plugged cable DVI, provided by HP, between my GFX card and the monitor. I have not tried to use the VGA cable provided by HP yet but I will soon if I can't find a solution to this problem.

  I don't know if it's a question of monitor or GFX card problem, so I need help to know what the problem is.

  Product name:

  HP 2311 x 23 "LCD Monitor

  Product #:

  XP598A

  System Operatying:

  Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1

  Specifications of the computer:

  Motherboard ASUS M4A88TD-V EVO/USB 4 AMD

  CPU AMD Phenom II X 6 1075 (6 CPUs), ~3.0GHz

  Corsair XMS3 8 GB (2 x 4 GB) DDR3

  NVIDIA GeForce GTX 460 (monitor connected via DVI ports, without adapters)

  Update:

  Too bad, this is not the graphics card at all. Me and my dad removed my GFX card and used the card integrated GFX motherboard with this updated GFX drivers - the same problem occurred. So we plugged my computer to a different monitor, test both motherboard integrated GFX card and the card GTX 460 individually, with all the new GFX update drivers and it works perfectly. We even checked the cables using them on the computer of my father, which works perfectly well, and nothing was wrong with them. I intend to return my monitor to Best Buy to sell a defective product. The best guess my father had was that the monitor has a faulty sleep function or a manufactured in-house when mishap. I appreciate the help and support of Frank.

• U2413, Audio sound coming from monitors the headphone jack.

  I have audio noise from headphone monitor U2413 plug.  My setup includes the following: XPS 15 laptop computer connected to the monitor with DisplayPort cable and the last standard headphones to the monitor.  The noise sounds like the gain is all the way to the top.  I have no audio on the computer running and still hear static noise.  I hear the sound noise cut only when I disconnect the video cable.  I tried DisplayPort and HDMI cables and still the same result.  The two cables that I know are well insulated.  Is their environment in the monitor that should get rid of this noise?

  The user's Guide, States on page 9,
  "Audio Out = connect the mini stereo Jack sound bar.
  «NOTE: use of the helmet is not supported for the line audio output connector.»

  This port is designed to be used with the Dell soundbar speakers or some other speakers. You should connect your headphones to the audio output jack of the computer.

• Windows 7 can be installed without screen lcd monitor r

  Windows 7 can be installed without screen lcd monitor r

  N ° you must enter information and you will need to see what happens...

• Can latitude D430 - I connect 2 LCD monitors to my D430?

  I have Latitude D430, has a second connector for additional monitor, but the connector does not seem to be good. How can I connect 2 LCD monitors to my D430?

  
  

• Compaq WF1907v 19 inch LCD Monitor - unable to connect its cable!

  HI - come to take delivery of a new "Compaq Presario SR5502UK PC + Compaq WF1907v 19 '' Widescreen Flat Panel Monitor", which is excellent.

  One small problem is that the monitor is VGA without no problem, connect to the PC by a cable but the audio cable supplied does not match the socket on the monitor so I can't use the integerated speakers.

  On the screen seems to be larger than the small (2.5 mm?) sheet and must be recessed with a turned up in decision-making.

  Any ideas?

  Paul

  You should be able to use the green audio cable supplied with the pc.

  If it does not fit, and it seems more than the port on the back of the LCD you have you might need a 3.5 mm to 3.5 mm. is smaller.

  We need a 2.5 mm to 3.5 mm adapter bit.

  Here is the manual on how to audio cable should look like: http://h10032.www1.hp.com/ctg/Manual/c01436406.pdf

  I found a pack really good on audio adapters here for only $4.99, one of them should work: http://www.newegg.com/Product/Product.aspx?Item=N82E16882021091