No audio output speakers Z50 - A Port Replicator PA5116A - PRI or Tecra

I just got a new Tecra Z50A Toshiba with a port replicator Port-PRI PA5116A, when I first put it in the doc, he began to load the drivers.
But during this process, the connection to the local network of abandonment and an error came stating that only four of the eight drivers have been installed.

Now, the problem I have is that no sound / music out laptop speakers when in the RFSO or replicators offline to the speakers.
I checked the playback settings that seem to be corrected.
No mute setting.

Any suggestions?

I just got a new Tecra Z50A Toshiba with a PA5116A-PRI port replicator, when I first put it in the doc, he began to load the drivers.
But during this process, the connection to the local network of abandonment and an error came showing that only four of the eight drivers have been installed.

Now, the problem I have is that no sound / music out laptop speakers when in the RFSO or replicators offline to the speakers.
I checked the playback settings that seem to be corrected.

No mute setting.

Any suggestions?

Hello

you have tested an update of the audio driver and install displaylink?

Tags: Toshiba

Similar Questions

  • Hi speed USB via a Port Replicator advanced for a Tecra 9100?

    I have the same problem with a Tecra 9100 and upgrade to hi speed USB as a previous post where the proposed solution was to use a PCMCIA card.

    (see link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24103)

    I had an idea, but I don't know if it will work and need some advice?

    Can you buy an Advanced Port Replicator that has Hi Speed USB 2.0 ports on it (like the PA3082U APR II that works with the Tecra 9100) instead of the PCMCIA card.

    If the docks of Port Replicator in the motherboard will it give you Hi Speed USB 2.0, or is the Tecra 9100 forced to USB 1.1 via hardware in the laptop itself and the Replicator will not help?

    Also if I go down the road of Port Replicator I need drivers for speed ports Hi of the Replicator to work on the Tecra 9100?

    Or to ask the question – what is the PCMIA USB 2.0 card in that advanced with HI Port Replicator speeed USB is not?

    Thanks in advance

    Hello

    the Tecra 9100 has NO usb 2.0 and it's a fact. Given that the Replicator has these USB ports 2.0 does not mean that your machine when it is docked to the Portrep, is able to manage USB 2.0 devices. The portrep, it's like a usb hub and behaves like. So if your machine doesn´t have it then that's it.

    And the explanation on the PCMCIA/Cardbus solution:
    The pcmcia card USB 2.0 Chipset, this is the reason why it IS a USB 2.0 device (roothub).

    I hope this was clear to you :)

    Just buy this card and you will have USB 2.0

    Welcome them

  • Advanced Port Replicator PA3474E-7-248 poor sound quality on Tecra A7-248

    Hello

    recently, I bought used Replicator Toshiba Advanced Port PA3474E-1PRP, working nice, but the only problem is audio - output when connecting the speakers to the port replicator - speakers of the laptop still works + there is a significant loss in sound quality.

    Everyone had the same problem, or maybe there's a sollution for this?
    THX in advance

    PS my laptop is Tecra A7-248

    Hello

    To me that sounds like this, out on the port replicator doesn t port works properly if connect you directly to the computer laptop, everything works correctly, or can you notice any problems?

    Have you tested other speakers?

    In this case I would recommend updating the sound card drivers and BIOS. The two you can download on the Toshiba site.
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  • Is it possible to use the port replicator with the Satellite Pro series?

    Hello
    Is it possible to use the port replicator (Docking Stations) for Tecra series laptop with the Satellite Pro series?

    Hello

    No, as far as I know it of not possible to use a port on laptops Satellite Pro Replicator.
    All laptops that support the Port Replicator has a port extension at the bottom of the unit.
    To my knowledge, the Satellite Pro series don t have this port.
    For now only the Tecra and some units Protégé(ie: S100) supports this feature.

  • Tecra 8100: Don't know if the Network Port Replicator II is working properly

    I had a PA3017E-1PRP, i.e. a Network Port Replicator II, for my Tecra 8100. The fact is: I don't know if it works. I plug the computer in and no new material appears. At least the 3Com NETWORK adapter should be recognized, but no sign of life is presented at all.

    In addition, the USB ports does not work, but at least, the leds of the watch of the computer there is come from there because they show that battery is charging and the power comes from the DC.

    So, how can I check that everything works correctly? The computer is Windows XP SP2 installed, and I installed all the drivers and the support of the utilities (common modules, mobile and other extensions) util Toshiba USA and Toshiba Configfree of Toshiba Asia...

    Hi Toka

    I really put t know why you install software mix on your device. In my opinion, you should install European tools and utilities if you live in Europe. But if everything works it is also OK. I just want to make this comment because I don't know if all tools can consort with each other.

    As much I know this unit only is not supported for Windows XP Home in Europe. If the US page has mobile extensions for Windows XP Home edition, I assume that it has been tested.

    You can use a ports from there or all of them are dead?

  • Tecra A8 and Adv Port Replicator III - no audio output from the port replicator

    I have a Tecra A8 anchored on an Advanced Port Replicator III. All ports (network, USB, video) with the exception of the AUDIO ports seem to work well. I can get sound from the headphone jack on the front of the A8, but nothing since the station docking ports. Is there a docking station driver or something I need to install to get the sound from the docking station not the laptop?

    Hello

    The Advanced Port Replicator III supports the line and line port left.
    As already suggested by user above; Check if you are using the command-line output port!

    Welcome them

  • Audio output digital on Lenovo docking station and Port Replicator

    Dear community,

    There is no station Lenovo port replicator or docking station for Thinkpad recent (T440 & X 440) with audio output digital?

    A big thank you in advance?

    Amine

    Neither has it. You need something like that. It divides basically your audio digital HDMI or DP.

    http://www.envioustechnology.com.au/products/images/further/HDMI-SW41_Inline_01.jpg

  • No Audio or USB ports with Port Replicator 3 and Portege R600

    I have a problem between my Port Replicator 3 (PA3681E-2PRP) and my Portege R600-13 X (Win7 Pro 32-bit). Everything has been working well for the past few months until a week ago. My PC has developed a problem then that plugged on the Port Replicator, it will not recognize something new that is connected to the USB (two PC & Replicator ones) ports, the Replicator audio output no longer works and the PC hangs during shutdown. Everything is OK with the PC when booted without the Replicator, but as soon as it is connected to the port replicator, in this case.

    I tried looking for information about this problem, but nothing helps... Any help to fix this would be greatly appreciated as it is to set up a business and I need it to work properly.

    A few things to try:

    Reinstall the Toshiba Value Added Package.
    Use system restore to restore Windows to a previous state.
    Check the connector for docking station for damage.
    Back up your data and perform the recovery.

    If its still does not, then I would send the laptop and the Port Replicator Port for an ASP for repair.

  • audio off when it is associated with the port replicator

    I use Windows XP with my Thinkpad T400 and I bought a Lenovo port replicator model k33415 with my computer.  I have a keyboard and a mouse attached to the Port Replicator port as a PDA sometimes.

    Whenever the port replicator is connected to the computer, the computer speakers do not work and I hear no audio.   When I restart the computer without the attached port replicator, the computer speakers are working fine.      I've tried everything!    Any ideas?

    Hello!  In fact, I fixed it on my own.   Under sound properties I adjusted the audio settings for 'Conexant HD', he made my default device, and under AUdio and then "Advanced", I needed to set speakers to computer speakers.  What I haven't done yet we see if this turns off audio when I unplug the duplicator... so I guess I need to change the default device.   You may not have the same problem, but in any case, good luck!

  • Tecra Z50-A-12 X is not properly connected to the Port Replicator III

    Hello

    I just bought a TECRA Z50-A-12 X with HI-speed III 120 replicator Port Replicator.

    It works but the computer is not stable and I fear that this will eventually damage the port see me problems when using.

    Indeed, the PC sits well in the Replicator.

    Is there a solution or did not have this app?

    Thank you for your response.

    Nice day

    Hello

    Please don't get me wrong, but you should clarify this with Toshiba directly. Here on this forum, you can hear some useful opinions and comments, but I think you should get info straight from Toshiba directly.

    You can also do is to contact the nearest Toshiba service provider and ask for help. You can visit ASP and demonstrate how it works and I hope that you will get a professional opinion on this problem.

    Long ago I had a Tecra laptop with port replicator, and he was well in place and really does so port replicator he not there no danger of damage to the small port located in the lower corner.

  • Tecra M10 and Express Port Replicator, no DVI to Toshiba 20 "LCD output

    Hello

    As the bed of the subject line, I will put up a new Tecra M10 with the Express Port Replicator and monitor LCD Toshiba Tekbright 20 ".

    The system works on Windows XP, and the ordinary VGA connection on the port replicator works fine when connected to the external LCD.

    However, there seems to be no way to get the DVI interface on port replicator, working on the LCD.

    I tried to run this utility, and it does not detect the DVI monitor at all.
    http://www.entechtaiwan.com/util/moninfo.shtm

    I have updated graphics drivers Intel for XP, form the Web from Toshiba site and also have the latest version of the BIOS.

    Any ideas?

    Thank you very much
    Paul

    Hello paul

    Your Tecra M10 has DVI port?
    Replicator port is not some sort of converter and it will be just a loop through the signal directly from the laptop.
    If the computer laptop doesn t supports DVI output you cannot expect to get signal from the port replicator.

  • Tecra S3 Advanced Port Replicator III more: video output, analog & digital

    I have a Tecra S3 in association with Advanced Port Replicator III.
    I can't get the two graphics cards to work together.

    The analog and digital video output should work together.

    It works on a Tecra S2, but not on the S3?
    Does anyone have an answer?

    Hello

    You want to use both outputs DVI and VGA on Advanced Port Replicator III graphics more simultaneously?

    Advanced Port Replicator III more supports the use only if the computer system unit laptop itself also supports the simultaneous use of RGB & DVI.

    So that would mean that the backs of Tecra S3 not supported this feature

  • Tecra A10 with replicator - no output to the DVI port but analog works very well

    Hi all. It's driving me crazy. Brand new Tecra A10 with a nine port replicator and a new external LCD. When I plug them all in all and connect to the screen using the blue/analog/d-sub cable, the image on the screen of the laptop automatically turns on the external screen when the A10 is docked. But when the external display is connected with the white/digital/DVI cable, the Tecra and/or the Replicator is auto-switch the output to the external screen.

    In addition, when you press Fn + F5 to switch the LCD only to LCD + CRT or CRT output only, the Tecra is so "smart" as to "realize" there is no screen, and it switches the output to only the Tecra.

    Now, we would put in place with the blue/analog/d-sub cable, but the picture is wavey and not satisfactory at all.

    Just so we're clear - when the display is plugged into another computer, there is a beautiful clear picture on/through the white/digital/DVI cable, so I don't think it's screen.

    Can anyone help with this please? Is the Replicator defective? Or am I missing something?

    Thank you very much

    As the portable Akuma (graphics card) does not have a DVI output.

    If you use the VGA cable, but image quality should not be worse as with the DVI cable.
    Choose the display resolution higher than the monitor supports and 60 Hz.

  • No sound on the Port Replicator port II (Tecra S11 - 12M)

    Hello! Because today, I have no sound on my sound from the Port Replicator II (PA3680E-1PRP) plug to run my external speakers. Instead, the internal speakers are running. On the laptop itself, making works well, only the port replicator appears to be dead.

    It has worked well over 10 months now without any complaint. I've seen a few similar cases in forums but no answer that could help me. I didn't lie all the drivers again.

    I work with WIN7/64-bit Service Pack 1.

    Anyone know how to fix?

    Thank you, christophe

    Hello

    Recommend to check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56460

    * Milo_Tweenie wrote: *.

    + Did not know that the audio 3.5 mm output jack is actually run by a USB hub in the duplicator. +
    + Concluded that the multimedia USB Audio Device was not installed driver for the audio port. Click the button to update the driver, it has found the driver automatically and now I have sound. +

  • Satellite L500-01u012 - problems of audio output

    I have a Toshiba Satellite L500-01u012 and I have problems with the audio output.
    When I plug a headphone or audio output in the audio output port, it does not neutralize the internal Laptop speakers.
    It's really annoying me and I wonder if there is a way around this?

    I have windows 7 Home premium 64-bit sp1 with all the latest patches to update, and I tried to remove, restart and then reinstalling the driver several times without success
    I also got the image of the plant cell to try to fix that and its still nto work.

    I downloaded the drivers from the toshiba support site, but they did not help

    Hello

    Is this something new or you have noticed this problem in the past too?
    Generally by default the internal speakers should be turned off when you connect earphones.

    I put t know what laptop do you have exactly (model number you wrote may not be the right) and what sound card is inside, but please check the audio options in the Panel.

Maybe you are looking for

  • I want a new tab to open as my homepage not several pages

    I want a new tab to open with my google homepage and not several pages that are of no interest to me. It seems if you switch the off option only get you a blank page. If you use add functionality that it doesn't now. This 'upgrade' is a nuisance.

  • Satellite L750 - error when installing Win XP 0x0000007B

    Hi all Urgent help to install Win XP on a laptop Toshiba L750. I tried Tosibha support and they will not help unless I pay a fee.I asked them what happened to support apparently you must pay about $146 each year for the software support and if you to

  • How can I speed up my Satellite A200-1BP?

    My A200-1BP was very good when I buy.Then I formatted completely. After formatting my machine doesn't work and the very slow start applications or programs. Please, help me speed up my machine. What I'm doing wrong?What should I do for this? Is there

  • can't reinstall OS in Acer S3-391

    I have an acer Aspire S3 391 - the calculation is crushed - since then I'm trying to restore and got the Acer CD 5, including drive systems. I can't go to the Restore screen, but then, on disk 1, it fails to find the partition. It says OS partition w

  • HP psc 1350

    I REALLY NEED THE DOWNLOAD DRIVER FREE FOR MY HP PSC 1350 AND DRIVER DETECTIVE SAYS IT IS, BUT IT ISN'T TOYS THANKS